the commands to, and responses
from, the cards.
Peter Tomlinson
-
Subject:Re: MUSCLE ATR parameters "F" and "D"
To: Smart Muscleheads [EMAIL PROTECTED]
From: Jim Rees [EMAIL
Bad news:
It seems that besides doing the PTS protocol with the
card and increasing the speed of the serial port,
Chipdrive controler needs to be informed of the new
serial por speed.
The problem is that the commands for changing the
serial speed are not going to be published by the
The problem is that the commands for changing the
serial speed are not going to be published by the
manufacturer...
Does their Windows driver do higher speeds? If so, it should be possible to
discover the Chipdrive command by snooping.
It might also be possible to figure it out without
Hello,
I was wondering about the interpretation of the ATR
parameters "F" and "D".
ISO 7816-3 says
work etu = 1/D * 1/9600 s
does this means that bitrate shold be set to D* 9600
when the parameter "D" is sent in the ATR ? (for
instance in Cyberflex TA1 = 0x94, and this means that
the
