Bizarrely not seeing my own posts hitting either list, or anyone's replies. :-(
Anyway, fsck from Kmoppix on /dev/sda1 /dev/sda3 show OK.
QTparted shows;
/dev/sda
/dev/sda1 ext3 101Mb /boot
/dev/sda2 linux-swap 508Mb
/dev/sda3 ext3 *Mb /
I'm going to try another FC6 install, testing the
On Fri, Mar 09, 2007 at 10:11:13AM +, Peter George wrote:
Bizarrely not seeing my own posts hitting either list, or anyone's replies.
:-(
Anyway, fsck from Kmoppix on /dev/sda1 /dev/sda3 show OK.
QTparted shows;
/dev/sda
/dev/sda1 ext3 101Mb /boot
/dev/sda2 linux-swap 508Mb
Peter George wrote:
Bizarrely not seeing my own posts hitting either list, or anyone's
replies. :-(
Anyway, fsck from Kmoppix on /dev/sda1 /dev/sda3 show OK.
You said it was a PE1550?
You could try the OMSA-Knoppix disks linked from:
http://linux.dell.com/monitoring.shtml
That would at
Thanks everyone for the advice. Here's what helped;
1. Boot from Linux Rescue/Knoppix check partition table integrity with
QTParted then run fsck. Reported no obvious faults.
2. Reinstall, testing FC6 media (no errors).
Past the mysterious 3% point on install now, and well into disk 2. Not
babaguy wrote:
Dear William,
I *do* appreciate your time in relaising what's been munging my e-mails - I
*think* the problem will be best addressed by me simply switching to the Plain Text
Format.
Better - ?
Again - many thanks!
- Paul B.
Beautiful, far better :-)
Beautiful, far better :-)New reduce the gaps between lines so it reads like a
normal paragraph or two, and you're all set to go :)
Dear Kyle -
I only *ever* put in ONE (count 'em, 1!) line of space between lines - it's
that pesky web-mail muncher over thar at SLUG Central that inhales my
