I have to agree with Terry. My CS is much stable and crystal clear when I note
the times versus the PPM.
Scott
Terry Chamberlin tcj...@yahoo.ca wrote:
Bob Adageyudi said,
Please explain your statement: This gives me the
highest silver concentration level in the water, but
Bob Adageyudi said,
Please explain your statement: This gives me the
highest silver concentration level in the water, but
guarantees me safe particle size.
I want to put as much silver in the water as I can
while limiting the silver particle size. When the
silver particles reach a certain size,
Yes it would, but the amount of silver *in solution* would probably
change when cooled...and still read in the 20s or 30s on a meter.
It might agglomerate into larger particles and drop out...might go yellow
or green?
Try it and find out.
I never felt a need.
Ode
At 11:10 PM 5/16/2006
At 05:23 PM 5/17/2006 -0500, you wrote:
1. Would using magnetized water or ozenated water to make EIS effect it
one way or the other?
** I find that using heavily ozonated water oxidizes the silver ions.
If the jug is left uncapped for several days, it no longer does.
Virtually all
Silver Smith wrote:
1. Would using magnetized water or ozenated water to make EIS effect
it one way or the other?
Not sure.
2. Would Ozenating or magnetizing EIS after the fact effect it one
way or the other? When I was making the Silver Lightning colloidal
silver it was being magnetized
Message-
From: Ode Coyote [mailto:odecoy...@alltel.net]
Sent: Thursday, May 18, 2006 6:17 AM
To: silver-list@eskimo.com
Subject: Re: CSCS question
At 05:23 PM 5/17/2006 -0500, you wrote:
1. Would using magnetized water or ozenated water to make EIS effect it
one way or the other?
** I
Maybe this question has come up before but I have not heald anybody mention it.
Question:
What happens if you boil CS ? and if you have lets say a quart of 25ppm CS and
you boil it down to half its volume would the ppm go up to 50ppm?
V
--
The Silver List is a moderated forum for discussing
If all that happened was that 50% of the water was lost, then yes. However when
you heat water the increased Browning movement causes increased
aggregation, larger particles, and eventually precipitation. Thus after
boiling you will likely find less number of particles, and may find many
Do not boil the EIS.
Ole Bob
V vzo...@yahoo.com wrote:
Maybe this question has come up before but I have not heald anybody mention
it.
Question:
What happens if you boil CS ? and if you have lets say a quart of 25ppm CS and
you boil it
1. Would using magnetized water or ozenated water to make EIS effect it one
way or the other?
2. Would Ozenating or magnetizing EIS after the fact effect it one way or
the other?
On 5/17/06, Robert Berger bober...@swbell.net wrote:
Do not boil the EIS.
Ole Bob
*V
I think the old time way is to place a soup can of beer in the garden..they like beer and drown your sorrows.
Slugs don't like salt very much.
Ode
At 09:49 PM 7/16/2005 -0400, you wrote:
well i don't know if CS will help to get rid of slugs or not but i thought if i asked here i might find
Slugs are repelled by caffeine. You can sprinkle used coffee and tea
grounds around but you have to replenish after a time.
Dan
Re: CSCS Question
* From: cking001 wrote:
* Date: Sat, 16 Jul 2005 18:17:29
No I don't think you'll have any luck with cs on slugs.
Effective treatments
No I don't think you'll have any luck with cs on slugs.
Effective treatments for slug control are copper as a barrier,
sprinkling then with salt to kill, placing cover for them so they will
congregate and can then be disposed of with salt ( a board on the
ground that they will crawl under)
well i don't know if CS will help to get rid of slugs or not but i thought if i
asked here i might find a solution...
i don't like the toxic stuff and the pellets don't work very well...
Try using household amonia either straight or diluted with a bit of
water (up to 30%).
I put this in a squirt bottle set to shoot a stream, and just give them
a squirt- they die almost instantly.It's fun and
the spray does not hurt plants as salt does.I do this after dark as that
is when most
Hi Trem and stuff,
The PWT is still strange to me. I still do not know what to think of
it.
But previously I talked about the conductance of the DW water (in
microSiemens).
In general, the conductance (in Siemens) is reciprocal value to the
resistance (in ohms) of any substance being measured.
So,
As I mentioned earlierthe PWT meter CANNOT read to three decimal places.
It can only show tenths, not thousandths.
Trem
- Original Message -
From: Stuff st...@laguna.com.mx
To: silver-list@eskimo.com
Sent: Sunday, April 18, 2004 7:35 AM
Subject: [silver_list] Re: CSRe: CS Question x
Thanks for clearing that up, Trem.
I even went along and wrote .000 when I knew better.
stuff
At 01:40 PM 4/17/2004 -0700, you wrote:
Hi Sandee,
I sell Hanna PWT meters and have never seen any DW read 00.0. Lowest I ever
saw was 00.5 uS I have seen deionized water purchased at a local
Hi Sandee,
I sell Hanna PWT meters and have never seen any DW read 00.0. Lowest I ever
saw was 00.5 uS I have seen deionized water purchased at a local Safeway
store with lower readings than any DW ever purchased so DI water is
acceptable to use to make CS. It all depends on the conductivity,
Thanks Trem
Regards
Sandee
The one who accomplished it is the one
who failed to realize that he could not do it.
The best thing to hit the Internet in years - Juno SpeedBand!
Surf the Web up to FIVE TIMES FASTER!
Only $14.95/ month
Use a laser pointer and check the tyndall. Verify it is still clear, or
very pale yellow. If you still have tyndall, and it is clear or pale
yellow, and you do not find the bottom black, you are probably ok.
Marshall
Michele Lee wrote:
I have no idea how to do that
Mic
Sorry to be on
and veggies. I'm pretty sure my candida is gone, so I have raw fruits now.
- Original Message -
From: Michele Lee ml...@firelandsschools.org
To: cds...@earthlink.net
Sent: Monday, December 16, 2002 10:19 AM
Subject: Re: RE: CSCS question... purchase
Thanks... I am eating kamut and brown
THANK YOU!!!
Use a laser pointer and check the tyndall. Verify it is still clear, or
very pale yellow. If you still have tyndall, and it is clear or pale
yellow, and you do not find the bottom black, you are probably ok.
Marshall
--
The silver-list is a moderated forum for discussion of
Hi
I order CS from Russ at naturalhealingsolutions.com.
Does anyone know how I can obtain the same value and partical size CS
more affordably?
Mic... working to rid myself of candida
(presently taking CS, MSM, and oil of oregano)
Ted:
Colloidal silver is extraordinarily effective against
Hi Michelle,
Make your own. It's less than a dollar per gallon to make at home.
Trem
- Original Message -
From: Michele Lee ml...@firelandsschools.org
To: silver-list@eskimo.com
Sent: Sunday, December 15, 2002 3:41 PM
Subject: CSCS question... purchase
Hi
I order CS from Russ
I have no idea how to do that
Mic
Sorry to be on this list and be this clueless. I joined after my CS was
frozen on my front porch (after delivery). Now I wonder if I need to
throw the stuff out.
Hi Michelle,
Make your own. It's less than a dollar per gallon to make at home.
Trem
--
Its easy just take 2 pieces of .999 pure silver I use wire that (I bought
from a jewelry store for $10) space them apart a few inches suspended in
distilled water (I buy mine from walmart for 58 cents a gallon) connect the
wires to 3 9volt batteries connected together I use wires with alligator
27 matches
Mail list logo
