Re: CSpwt vs tds

Okay lots of great info regarding water etc however I am not sure what is the difference between this hanna pwt and a TDS that I also see people talk about. Does the pwt meter read differently? My second batch of water came out high around 2.3 and then after it cooled over an hour or

RE: CSMercury Filling vit C

One good way to get rid of mercury is by Bowen treatments if you can find a practitioner near you.  Just get a basic Bowen treatment and you will eliminate mercury.  I've seen it tested and it works. PT --- On Wed, 11/3/10, M. G. Devour mdev...@eskimo.com wrote: From: M. G. Devour

Re: CSdistiller/ppm/hanna meter

Not good procedure. However, the fluid is just salt water. Once you have the meter reading right, make a quart of your own using the meter. It doesn't have to be 84 uS, just note what it is, somewhere in the neighborhood. When reading it, make sure everything is at and stays at the SAME

Re: CSdistiller/ppm/hanna meter

Yea, well..don't call Hanna Tech. They'll just tell you that you aren't seeing what you are looking at. Ode At 07:33 AM 11/3/2010 -0700, you wrote: A Now I have to do it over again LOL I just reset it I should have just talked to someone over the phone!! Lots of contradicting

Re: CSdistiller/ppm/hanna meter

AND leave the meter and sample cup and fluid in the SAME place over night so they will be the SAME temperature. Hold neither the sample cup nor the meter tightly to avoid changing the temperature of either WHILE calibrating. Ode At 07:14 AM 11/3/2010 -0700, you wrote: Do NOT use the

Re: CSPromising Wrinkled lSkin Treatment

Brooks I went to the site to purchase the collegan but there are two kinds, one from chickens and one from beef. Thanks for the information Mary From: Brooks Bradley bradlebro...@gmail.com To: Silver-list@eskimo.com Sent: Tue, November 2, 2010 2:27:35 PM

CSRe: silver-digest Digest V2010 #865

Hi Mr. Bradley,   I am currently using the Colloidal Silver, DMSO and glycerine mix you previously gave.  Can i just add the collagen to saturation point in the mix?   Thanks.   Melly --- On Thu, 11/4/10, silver-digest-requ...@eskimo.com silver-digest-requ...@eskimo.com wrote: From:

Re: CSlong and short rods

You have to look at the electric field distribution. If you have a short wire, then you are going to have a much higher voltage drop near the wire as the resistance will be higher. I do know that when I was making CS with short wires it required 10,000 volts to get the current flow. So, yes

RE: CSMercury Filling vit C

Hey PT. I've heard of Bowen. How does a massage get rid of mercury? Samala, Renee ---Original Message--- One good way to get rid of mercury is by Bowen treatments if you can find a practitioner near you. Just get a basic Bowen treatment and you will eliminate mercury.

RE: CSMercury Filling vit C

Hi Renee, Bowen is not massage.  It is an adjustment of the autonomic nervous system by subtle movements across muscles at specific points.  PT --- On Thu, 11/4/10, Renee gaiac...@gmail.com wrote: From: Renee gaiac...@gmail.com Subject: RE: CSMercury Filling vit C To: silver-list@eskimo.com

RE: CSMercury Filling vit C

Ah, thanks PT. Years ago I talked to a lady (the only certified Bowen practitioner around here then) about my Mom's rotator cuff problem. She said that she use to be a sports massage therapist, but gave it up in favor of Bowen. Also, that Bowen took care of all her clients with the rotator cuff

CSmaking first batch need input please

Hi all. Just about to make my first batch however I would like input as to how to do this properly. The instructions from the company says to make the water hot to boiling point. But this is to make yellow silver. I dont want to make yellow product. So... Im thinking: do I need to heat the water

Re: CSmaking first batch need input please

Hi, Beth, I`m Marshalee, an oldie on the List. I`ve been using CS for 14 years now. I`m a Lyme Disease survivor thanks to CS. I make my own CS with a gadget that plugs in the wall, giving me 30 volts. (I have used the 3 9-volt batteries and salt method, but this works better.) I use 2 cups of

Re: CSmaking first batch need input please

Thanks so much Marshalee I put the electrodes 1.5 inches apart and I am using the gadget that only uses 1 battery even though it says it has 0-33volts(I am not sure how that works.) Anyway, it has a 20 min timer and every 20 min I am calculating the water with hanna pwt meter. So far I have

Re: CSmaking first batch need input please/Final Results

My Final Results: Hanna Pwt meter reading Started with  0.2 distilled water +20 min = 0.3 +20 min = 0.9 +20 min = 3.4 some black res on one electrode(off with paper towel) +20 min= 5.6 some black res on both(off with pt each time after this) +20 min=10.4 +20 min=17.8 +10 min= 20.8 + 5 min= 23.8 +

CSMercury Filling removal - anesthesia

Just an FYIIF IF IF there is any overlaying illness such as chronic fatigue/fibromyalgia/hypothyroidism/MCS/EI present we may not clear the usual local mouth anesthesia of have a mild reaction we have considered normal just because it is the way we have always felt after dental work

CSweather affecting CS manufacture

Can anyone tell me if weather affects how long it takes to make CS? When I got my silverpuppy I made several batches during the summer when it was bright and dry with the air conditioning on.  It took about 6 hours max.  I made some today when it was grey and rainy and it took 11 hours. 

RE: CSMercury Filling removal - anesthesia

Paula, why is carbacaine better than lidocaine? I am also having work done at the end of this month, removing a large, old mercury filling and replacing with a partial crown and also two smaller mercury fillings to be replaced. Thanks, Jess -Original Message- From: Paula Samuels

Re: CSweather affecting CS manufacture

Wonder if the moon has any affect? From: PT Ferrance ptf2...@bellsouth.net To: silver-list@eskimo.com Sent: Thu, November 4, 2010 10:22:54 PM Subject: CSweather affecting CS manufacture Can anyone tell me if weather affects how long it takes to make CS?