I think the size thing has been handled.
http://web.usna.navy.mil/~bruninga/balloons.html
Apparently several governments are working on a Differential GPS system that
will give much higher resolution in the near future. Still won't be good
enough for spot landing, I think.
Thanks
I have a friend in Wichita, KS (2 hours from Lake Wilson) whose life is now
dedicated to sloping! He is looking for sloping sites in Oklahoma and in
Colorado Springs. Does anyone know of decent slope sites there?
Thanks,
Garland
RCSE-List facilities provided by Model Airplane News. Send
Larry - go to rcsoaring.com
Dan
--- [EMAIL PROTECTED] wrote:
Does anybody know if the results from the RoseBowl
Contest are available on
a website. I would like to have a copy of the
results for the Harbor meeting
tonight. Thank you Larry
RCSE-List facilities provided by Model Airplane
Does anybody know if the results from the RoseBowl Contest are available on
a website. I would like to have a copy of the results for the Harbor meeting
tonight. Thank you Larry
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL
They're in and you can see the main graphic element at www.soarmd.org
While the ball caps from 1999 where a hot commodity, the 2000 East Coast
Hand Launch Classic "souvenir" will be tees. Arguably, 2000 marks the
20th year of organized hand launch competition. It's also the 20th
anniversary of
Do you guys realize just HOW MUCH space you took up on RCSE Digest # 1161.
Yes! I know you do because you had another chance to look at that resend,
resend, resend :-) !! PLEASE, et al! Thank You!!
Paul Clark, SKY PILOT ONE, Osaka, Japan(AMA # 53 777 1)
annot adjust ratios at all unless you can live with less than 90 degrees of
flaps.
I think I would buy a computer radio on the spot that could effeciently deal
with this issue.
Rob Crockett
Just mix flaps into flaps and you will get more movement if you can't do
that with your Tx then get
What a great first experience in F3B. I had the most fun/stress of any
flying contest I can remember (not too many, unfortunately). After the
first day I didn't know how I would like it, since this is supposed to be a
"relaxing" hobby to take away stress from work. Here we are
trying to listen
Don't encourage him, Ron. He needs a forum all to himself. We will
probably see this one all week, several times a day.
Klaus weiss.
-Original Message-
From: Ron Adams [mailto:[EMAIL PROTECTED]]
Sent: Sunday, April 30, 2000 8:32 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject:
I am somewhat new to the RC soaring hobby although I did have a 100"
glider about17 years ago. Back in now and I have almost completed a
"Big Bird" which I have always wanted. Somehow I think it is truly
elegant. Anyway. I have a Master Airscrew and the plans do show the
installation of that
Rob Crockett wrote:
As a way of comparing the ease of programming computer radios, consider this
simple test: Show what needs to be done to get 90 degrees of flaps from a
full 90 degrees of flap servo motion. Piece-o-cake with ailerons, but very
tough with flaps, since ailerons move both 45
Greetings!
The pack in one of my JR's is going bad fast. I even had to recharge
during the contest over the weekend.
Who is selling the highest capacity packs for the JR 388/8103 series?
TIA
=
Dennis Phelan
__
Do You Yahoo!?
Send instant
Glenn,
What kind of transmitter are you using? The Berg RX is extremely narrow
band single conversion receiver. I know that my Futaba 8U with the Hitec
Spectrum pack is too wide to communicate with it. I HAVE to use a well
tuned OEM Futaba module with the Berg.
If all else fails, return the
Metaterra makes a nice one. Flies very smoothly and fairly fast. Needs
10+mph lift though.
http://soaring.freeservers.com/metaterra/
Cheers,
Nathan Woods
Webmaster: www.boomerangwings.com
Temple Hill Slope Squadron
Orange, California
http://home.earthlink.net/~windrider007/index.html
Dudes
Anybody have a right wing panel for a Victory laying around? 7037. Doesn't
have to be perfect but no real structural damage please.
Denny Maize
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
I noticed a very small Pheobus (sp) in this months RCM. Its made by a
company called Stans Fiber Tech. Has anyone seen this plane? Anyone know
the availablity of this cute little bird? There doesnt seem to be any info
on his website.
Kristopher
RCSE-List facilities provided by Model
Anyone out there have any experience the Hobby Shack's Activator
charger?
TIA,
Kevin
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
D.O. and others,
I was able to get out tonight for about and hour and half after my sons ball
practice to fly the Hera. My first flight was at around 7:30 and it lasted
over 8 minutes, that was my shortest, most averaged around 9.5 min.. My
last flight of the evening finshed after sunset and
Since I live near the Airtronics headquarters in SoCal, I hand-carried in my
months-old RD6000 TX for warranty service yesterday. It malfunctioned over
the weekend and wrecked a new HLG, but that's another story.
I called ahead, then arrived at about 1:30 PM and AMAZINGLY it malfunctioned
on
The Torrey Pines Gulls will be having a F3J contest on Saturday, May 13,
2000. We will try to get as many flying rounds in as possible. Also we
will try and preserve team/group affiliations. Contest director is
Terry Throop. The contest will be at the Poway TPG thermal field. If
you need
Looking for someone in California who is able to replace a lithium battery
in a JR X347 must be abls to turn around quickly while visiting. 1 week
etc?
Getting very worried about X347 cause In NZ they say you can't do it but I
know u can. Please get in touch with mw ASAP.
Regards
Aneil
It should not be nessasary (I believe a vendor cannot legally process
your credit card till the final part of the transaction takes
place...shipping), but I would suggest to everyone that you instruct any
vendor to process your credit card the day it is shipped. This is fair
to both, and
unsubscribe soaring digest [EMAIL PROTECTED]
begin:vcard
n:Briggs;Rick
tel;home:562 865-2464
x-mozilla-html:FALSE
adr:;;
version:2.1
email;internet:[EMAIL PROTECTED]
x-mozilla-cpt:;0
end:vcard
Hello Bill
I had this problem at one time and found that the carbon fiber had a
light mesh of material to hold it in shape. The problem is that this material
has a reaction to the epoxy and generates a gas (out gasses) which makes the
bubbles.
Two things will cure it. One is to remove
24 matches
Mail list logo
