On 2007/10/19 09:51, Bill Maas wrote:
as the other soekris-tech list members stubbornly refuse to go into your
original question
it's mentioned here:
http://www.soekris.com/Software/changelog.txt
___
Soekris-tech mailing list
Hi folks,
I would like to wrap this thread up: I believe I have it working now.
At least it hasn't failed on me yet when I (re)boot the animal.
I tried Lilo in addition to GRUB, but it still failed. It started
being reliable when I changed the network configuration from DHCP to
static IP and it
On Thu, Oct 18, 2007 at 01:47:24PM -0400, der Mouse wrote:
In my (admittedly limited) experience, this happens IFF spanning tree
is enabled (both globally and on the affected port). Turning off
spanning tree usually makes it all just magically start working.
Agreed. And these days a majority
der Mouse wrote:
In my (admittedly limited) experience, this happens IFF spanning tree
is enabled (both globally and on the affected port). Turning off
spanning tree usually makes it all just magically start working.
Close: if spanning trees are enabled globally, are enabled on the
affected
Hi Bent,
Use Lilo, comes with no fuss.
Bill
On Fri, 2007-10-12 at 19:44 +0200, Bent wrote:
Hi
The first version of this post apparently never made it to the list,
so here it is again. Since I wrote version 1 (2 days ago) I have had
rather frustrating experiences with my 5501: It simply
Hi
The first version of this post apparently never made it to the list,
so here it is again. Since I wrote version 1 (2 days ago) I have had
rather frustrating experiences with my 5501: It simply will not boot
reliably without a serial console attached. As I write below I'm
convinced this a flow
Hi
The ConMute BIOS is apparently new to the 5501. I have been unable to
find a user's manual for the 5501 so I (try to) use the manual for the
4801 instead.
After having used the hints from the 5501 Mystery - to me - at boot
time thread I was able to get the 5501 to boot without a serial