spicec -h HOST -p 5900 -s 5901 --ca-file file.pem
warning:fialed to connect : connection refused(111)
1363262333 INFO [12182:12182] Application::main: starting 0.8.3
1363262333 INFO [12182:12182] init_key_map: using evdev mapping
1363262333 INFO [12182:12182] MultyMonScreen::MultyMonScreen:
)
1363316293 DEBUG [10096:10096] cleanup:
At 2013-03-14 20:33:32,David Jaša dj...@redhat.com wrote:
could you post debug log, i.e. with SPICEC_LOG_LEVEL environment
variable set to 0 (zero)?
David
bigclouds píše v Čt 14. 03. 2013 v 20:10 +0800:
spicec -h HOST -p 5900 -s 5901 --ca-file
hi,all
i use thin client to visit guestVM(throught spice), if i attach usb device to
thin client, how to assure that this usb can be only accessed by the guestVM
corresponding to thin client?
thanks___
Spice-devel mailing list
to limit one person's usb-storage is only can be seen by its host.
thanks
At 2013-04-22 15:26:29,Hans de Goede hdego...@redhat.com wrote:
Hi,
On 04/22/2013 04:01 AM, bigclouds wrote:
hi,all
i use thin client to visit guestVM(throught spice), if i attach usb device
to thin client, how
hi,all
if read-write perm on redirected usb is controllabe in guestVM
thanks___
Spice-devel mailing list
Spice-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/spice-devel
if qemu can control its R/W?
At 2013-04-24 19:14:20,David Jaša dj...@redhat.com wrote:
The device is redirected as-is so the guest VM has full control of it,
including R/W settings of devices where such settings are applicable.
David
bigclouds píše v St 24. 04. 2013 v 16:35 +0800:
hi,all
hi,all
the connection between remote-viewer and guest is good, now unplug Network
Cable, wait several minutes, then kill virt-viewer.
now guest will be shutdwn.
---winxp.log of libvirt--
handle_dev_display_connect: connect
handle_new_display_channel: add display channel client
infos:
spice-server-0.10.1-10.el6.x86_64,centos 6.3
At 2013-05-02 17:49:02,bigclouds bigclo...@163.com wrote:
hi,all
the connection between remote-viewer and guest is good, now unplug Network
Cable, wait several minutes, then kill virt-viewer.
now guest will be shutdwn.
---winxp.log
(in
qemu-kvm) that should have been fixed in RHEL 6.3.
Could you retest on centos 6.4, please? There were similar bugs fixed in 6.4
cycle.
David
bigclouds píše v Čt 02. 05. 2013 v 18:17 +0800:
infos:
spice-server-0.10.1-10.el6.x86_64,centos 6.3
At 2013-05-02 17:49:02,bigclouds
hi,all
i use guest play video(movie), then i unplug cable, wait several minutes, plug
cable again, The video is not smooth In a few minutes
what lead this? my network is good.
thanks.___
Spice-devel mailing list
Spice-devel@lists.freedesktop.org
many functions start with 'red', what does it mean?
thanks___
Spice-devel mailing list
Spice-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/spice-devel
hi,all
it is regular, if you put mouse not underneath media player, then click right
button on desktop, video will shake.
thanks
centos6.3
spice-gtk-python-0.11-11.el6_3.1.x86_64
spice-protocol-0.10.1-5.el6.noarch
spice-glib-0.11-11.el6_3.1.x86_64
spice-gtk-0.11-11.el6_3.1.x86_64
hi,all
unplug network cable, wait for sevaral munites, then plug again, at first
minutes the video (i play a video) screen speed up to play, but then
screen will stop , remain unchanged. reopen a spicy is needed.
thanks___
Spice-devel mailing list
hi,all
i am looking into the code,need some documents to help me understand it, or
give me some advices.
is there any way to debug spice including server and client?
thanks___
Spice-devel mailing list
Spice-devel@lists.freedesktop.org
hi,all
1.it seems that there are many racing condition between channels.
for example all channels of a vm connect to just only one client, if the
client down, a variable shared between channels should be set.
let see my problem.
1.server is aware of client is down (reset),
2.snd_receive
hi,all
look at the output of netstat, it is after at least 30minutes i un-plug cable.
how to make server know client's disconnect and disconnect channels(clean
channels).
tcp0 0 192.168.5.240:5903 192.168.5.163:60029
ESTABLISHED 31315/qemu-kvm
tcp0
hi,
i have send a mail to ask why server is not aware of client's disconnection,
nor client side. both think the connection is good.
i test via unplug cable. look at result after unplug cable.
why is that?
thanks
server:
tcp0392 192.168.5.240:5903 192.168.5.163:60029
hi,
1.how to know the channel type of a port? look at following output.
sometime port on server side is not identical to client side.
i want to find which channel is disconnected.
2.there are how many channel and its type-value.
thanks
-
tcp0 0 192.168.5.163:60097
hi,
spice-gtk-0.14-7.el6.x86_64
spice-glib-0.14-7.el6.x86_64
spice-gtk-tools-0.14-7.el6.x86_64
virt-viewer-0.5.2-18.el6_4.2.x86_64.rpm
---
(remote-viewer:20877): GSpice-DEBUG: spice-session.c:1747 set mm time: 87024464
(remote-viewer:20877):
hi, i set kepalive on server side, then unplug cable,then wait for a while.
why other channels is disconnected other than 38102(i think it is main
channel),
but after re-plug cable , client can not connect server for ever.
how to solve this: 1. disconect the only remain one . 2 let client
hi, please tell me what is the channel type whose value is 2 ,5?
any other channels and its value.
thanks.
reds_handle_link: YY client connection 192.168.5.188, 5901
reds_handle_link: YY client connection 192.168.5.129, 38167
reds_handle_link: YY client channeltype 2
hi,
version 0.10.1 rpm
please tell me the meaningof 107,109,110, where to find its define.
red_peer_receive: No route to host
red_channel_client_disconnect: 0x7fb1b8606650 (channel 0x7fb1b80458d0 type 2 id
0)
display_channel_client_on_disconnect:
hi,
now i do not know which callback function is for client, and which is for
device.
and how device driver communicate with spice server socket(where the code is,
device side).
i understand it in this way:
main thread only accept client connect, then redirect command to worker
thread(only
hi,
throught test, i find if channels disconnected by server, client will never
reconnect it again.
server and client only make only one connect for each channel when launch
remote-viewer.
where and how should i add code to check channels status and reconnect only if
channel disconnected?
1.is there a solution now?
server may disconnect some of spice channels, but client does not reconnect ,
how to do with this?
close client or let client reconnect?
2.
where is the code from which we can get socket signal(error,EPIPE..) when
channel disconnected.
thanks
在 2013-05-08
close client?
thanks
At 2013-05-22 02:52:14,Yonit Halperin yhalp...@redhat.com wrote:
On 05/20/2013 10:39 PM, bigclouds wrote:
1.is there a solution now?
server may disconnect some of spice channels, but client does not
reconnect , how to do with this?
close client or let client
hi,all
i know that usb can be catgoryed by class.
i want to know how spice to recignize and categroy usb devices?
storage,mouse,keyboard
and where is the code.
thanks.___
Spice-devel mailing list
Spice-devel@lists.freedesktop.org
hi,all
1.for video detect , what is the differences amoung different modes?
off|filter|all
2.i only know image,video. what is jpeg?it is like zlib for image
compression.
thanks___
Spice-devel mailing list
of high rate updates of the same
region over the primary surface.
off=turn off video streaming support
filter=don't stream as video sequences of images that contain mostly text.
all=do not apply filter.
Regards,
Yonit.
On 05/24/2013 03:07 AM, bigclouds wrote:
hi,all
1.for video detect , what
hi,all
1.how server detect network status?
2.what is the standard of LOW,HIGH bangwidth?
thanks___
Spice-devel mailing list
Spice-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/spice-devel
hi,all
i think a break is needed.am i right?
case SPICE_MSGC_INPUTS_KEY_DOWN: {
SpiceMsgcKeyDown *key_up = (SpiceMsgcKeyDown *)buf;
if (key_up-code == CAPS_LOCK_SCAN_CODE || key_up-code ==
NUM_LOCK_SCAN_CODE ||
key_up-code == SCROLL_LOCK_SCAN_CODE) {
yes.i want to contribute to this project.
now i have known the general frame , but it is hard to know deeper and further
more.
like mouse press,position , where will the data been put? how finally all of
them are hanlded?
i think mouse input is the easiest, so i analyse it first, please show me
hi,all
i have used spice for a long time,it is good, but in pratice it needs
improvement, like resource usage, network bandwidth,performance.
1.it eats up much cpu on client side, up to 90% when play video. i am sure
whether decompression or something else uses so much cpu. if client
yhalp...@redhat.com wrote:
Hi,
On 06/18/2013 10:33 AM, bigclouds wrote:
hi,all
i have used spice for a long time,it is good, but in pratice it needs
improvement, like resource usage, network bandwidth,performance.
1.it eats up much cpu on client side, up to 90% when play video. i am
sure whether
hi
i am not farmilar with this eara,i have several question ,trouble you all to
answer me.
it involves both server and client
1.if hardware accelaration needs special hardware?
2.if i have such hardware, how to use it with spice? how to check out whether
acceleration takes effect?
hi,all
i want to know on client side, how image data is rendered?
and the relation among pixman,gtk,cairo,opengl
thanks
___
Spice-devel mailing list
Spice-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/spice-devel
hi,
1.
in this post, it mentions RED_STREAM_FRAMES_START___CONDITION, i do not find it
in source code.
2.
what is the threshold of video detect?
3.action of excel opertions are very slow, could you tell me where(source code)
i should look into to locate this problem?
thanks
在 2013-07-02
hi,all
i do not understand graphic process procedure very well.
spice get graphic command from qemu, it seems like this command just only
include display-data(pix data), has nothing with graphic command. in my
mind, graphic command means 'draw line, draw circle'. so all spice knows about
hi,all
1.what kind of scancode spice use for kbd?(which scancode set)
2.when switch from spice-ui-client to ternimal, then push numLock,capLock..,
then switch back to spice-ui-client,
this action will lead led status inconsistent, how to avoid it, for example,
when spice-ui-client get
it is remote-viewer.
if XT scancode can support all kbd or most kbd?
thanks
At 2013-08-08 18:10:26,Marc-André Lureau mlur...@redhat.com wrote:
- Mensaje original -
hi,all
1.what kind of scancode spice use for kbd?(which scancode set)
XT scancodes
2.when switch from
hi,,all.
i have quesiont about inputs_channel_handle_parsed.
why SPICE_MSGC_INPUTS_KEY_MODIFIERS need two kbd_push_scan , while normal key
just need only one kbd_push_scan?
thanks.___
Spice-devel mailing list
Spice-devel@lists.freedesktop.org
hi, sometime modifier key state is not right.
Spice-Warning **: inputs_channel.c:442:inputs_channel_handle_parsed: YY 0
leds=0, modifiers=6
Spice-Warning **: inputs_channel.c:442:inputs_channel_handle_parsed: YY 1
leds=0, modifiers=6
Spice-Warning **:
hi,all
i have questions about xf86-video-qxl.
1.how to use it?
2.in its code, there are code related to XF86DRM. while XF86DRM is kernel
driver.
if xf86-video-qxl is related to kernel version . kernel 2.6.32 has no XF86DRM.
thanks___
Spice-devel
it is needed to detect the return of qxl_uxa_init in qxl_screen_init .
At 2013-11-06 21:59:58,Jeremy White jwh...@codeweavers.com wrote:
Nice catch!
On 11/06/2013 03:37 AM, bigclouds wrote:
hi, it allocate twice memory for qxl-uxa in function qxl_screen_init and
qxl_uxa_init
hi,all
i have two questions about certificate and ipv6
1.
on windows, i install spice-client, it can connect its vm throught ipv6
throught console.vv.(delete two charachters [ ] of ipv6 address first).
but on linux os, remote-viewer can not connect to vm throught ipv6. why?
i have try many
-viewer:12972): GSpice-DEBUG: spice-channel.c:2259 main-1:0: Connect
error
At 2014-03-24 16:36:19,Christophe Fergeau cferg...@redhat.com wrote:
Hey,
On Sun, Mar 23, 2014 at 08:27:32PM +0800, bigclouds wrote:
hi,all
i have two questions about certificate and ipv6
1.
on windows, i
at 09:45:54AM +0800, bigclouds wrote:
centos6.3
spice-gtk-0.20-11.el6.x86_64
spice-server-0.12.2-1.el6.x86_64
spice-glib-0.20-11.el6.x86_64
virt-viewer-0.5.6-8.el6.x86_64
i think the problem is related to spice-glib, g_network_address_new. maybe
glib has some problems
thanks
0001-there-is-only-few-oppotunity-one-or-two-to-sync-keyb.patch
Description: Binary data
___
Spice-devel mailing list
Spice-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/spice-devel
48 matches
Mail list logo