Hello.
I heard a friend of mine talking about how he compresses the requested
web pages and serves it to users (compressed) with MS ISA Server. Can
that be done with Squid? if is true.
Thanks, this is basically the solution. Can I do header override in squid to
add this if the origin does not send this header?
Would it make sense for squid to keep the state of the origin server for a
few seconds, so it dose not have to contact it when it is not accessible on
each individual
excuse me, 1 megabit per second for a week, so :
1 Mb *60*60*24*7=604.800 / 8 = 75.600 MB about 76 GB traffic for week.
I'm refering both inbound and outbound traffic (1 Mbps in , 1 Mbps out).
Well, that is just one megabit per second. That is the link bandwidth, it's
irelevant to provide
excuse me, 1 megabit per second for a week, so :
1 Mb *60*60*24*7=604.800 / 8 = 75.600 MB about 76 GB traffic for week.
I'm refering both inbound and outbound traffic (1 Mbps in , 1 Mbps out).
Well, that is just one megabit per second. That is the link bandwidth, it's
irelevant to
Hi,
Can anyone please clarify what does ' average service time = 3 msec' signify
?
I get it when I access the cache managers redirector information.
Redirector Statistics:
program: /home/zdn/bin/redirect_parallel.pl
number running: 2 of 2
requests sent: 155697
replies received: 155692
On Fri, 26 Jun 2009 03:42:17 +0100 Amos Jeffries
squ...@treenet.co.nz wrote:
london...@hushmail.com wrote:
On Thu, 25 Jun 2009 05:44:24 -0700 Amos Jeffries
squ...@treenet.co.nz wrote:
london...@hushmail.com wrote:
Hi,
I am trying to setup a local squid cache on my laptop so that
I
can
On Tue, Jun 30, 2009 at 7:42 AM, Wilson Hernandez - MSD, S.
A.w...@msdrd.com wrote:
Hello.
I heard a friend of mine talking about how he compresses the requested web
pages and serves it to users (compressed) with MS ISA Server. Can that be
done with Squid? if is true.
Yes, it can be done
I am running squid with tproxy having followed the wiki Features/TPROXY
in bridged mode. Squid is working properly with no evident errors in
the logs, however initial requests are extremely slow to respond. i.e
the first request for yahoo.com may take several seconds to retrieve
the
I checked -- cached objects are not re-checked, at least not with two or
three hours.
But the memory usage is higher still without icap while the cache is still
filling -- but this
may due to the fact that I configured squid to cache objects only up to 1
MB and icap scans larger objects, too.
Hello,
I am trying to Cache Youtube Videos with my SquidNT 2.7STABLE6 but there is
nothing working .. I also installed strawberry-perl-5.10.0.4.exe .. I wish if
anyone can help it .
Here is my squid.conf :
--
# ACCESS CONTROLS
acl all src all
acl manager proto
trasor wrote:
I am running squid with tproxy having followed the wiki Features/TPROXY
in bridged mode. Squid is working properly with no evident errors in
the logs, however initial requests are extremely slow to respond. i.e
the first request for yahoo.com may take several seconds to
fadi.sbat wrote:
Hello,
I am trying to Cache Youtube Videos with my SquidNT 2.7STABLE6 but there is nothing working ..
I also installed strawberry-perl-5.10.0.4.exe .. I wish if anyone can
help it .
SquidNT? no such thing any more. Not since early Squid 2.6 integrated
Windows support.
Hi there,
I am running squid 2.5 on freebsd 7, and my squid box respond very slow during
peak hours. my squid machine have twin dual core processors, 4 ram and
following hdds.
Filesystem SizeUsed Avail Capacity Mounted on
/dev/da0s1a9.7G241M8.7G 3%/
devfs
Elli Albek wrote:
Thanks, this is basically the solution. Can I do header override in squid to
add this if the origin does not send this header?
Not early enough for it to matter. The header alteration done by Squid
happens just prior to the reply being sent to the client. The caching
There have been some changes to the information provided on the Squid
Project ftp.squid-cache.org server.
The squid-2 and squid-3 directories have been replaced with a single
squid/ directory and the DEVEL and STABLE separation has been removed.
All current release source packages are to
Hi there,
I am running squid 2.5 on freebsd 7, and my squid box respond very
slow during peak hours. my squid machine have twin dual core
processors, 4 ram and following hdds.
Filesystem SizeUsed Avail Capacity Mounted on
/dev/da0s1a9.7G241M8.7G 3%/
devfs
Upgrade to a later Squid version!
adrian
2009/6/30 goody goody think...@yahoo.com:
Hi there,
I am running squid 2.5 on freebsd 7, and my squid box respond very slow
during peak hours. my squid machine have twin dual core processors, 4 ram and
following hdds.
Filesystem Size
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello there,
Will the paths on the HTTP-Server also change?
- -- Matthias
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
Good morning,
I know this isn´t the exact list for this question, but since Sarg and
Squid are very closely attached, I presumed this would be my best shot
so far.
I know that I can individual topusers graphics. Does someone knows how
I can put all the topusers in one single graphic?
Or does
tis 2009-06-30 klockan 15:13 +1200 skrev Amos Jeffries:
On Mon, 29 Jun 2009 18:50:30 -0700 (PDT), Chudy Fernandez
chudy_fernan...@yahoo.com wrote:
I think this well help
acl maxcon maxconn 4
acl partial rep_header Content-Range .*
http_reply_access deny partial maxcon
I
mån 2009-06-29 klockan 10:43 +0100 skrev Dayo Adewunmi:
Which of these options are included by default? For example, when I install
squid with apt, I get delay pools enabled by default. Is this the same for
installing squid from source?
The options enabled by default is listed with an
tis 2009-06-30 klockan 05:58 -0700 skrev goody goody:
Hi there,
I am running squid 2.5 on freebsd 7, and my squid box respond very slow
during peak hours. my squid machine have twin dual core processors, 4 ram and
following hdds.
Filesystem SizeUsed Avail Capacity Mounted on
tis 2009-06-30 klockan 17:08 +0200 skrev Silamael:
Will the paths on the HTTP-Server also change?
Some day they may, but no change planned there today.
Regards
Henrik
No, it is not. It may be 1mbps .OR. 76GB for week. it can't be anything
per second for week. You may mean 1mbps during weekdays, 1mbps during
the whole week, 1mbps average.
I want to say if weekly average of http traffic is 1 Mbps (monitored by mrtg
tools), all http traffic, which goes to my
Hi All,
Would like to know if its possible to setup reverse proxy for multiple
https with just 1 IP for squid
meaning squid will listen on 1 IP and do reverse proxy for multiple
domains with multiple certificate (certificate as per the domain)
//Remy
Hi,
I'm looking for the ldap_auth option for squid 3.0. all i see on the
./configure options are the following
--enable-basic-auth-helpers= (OPTIONS: digest_auth, negotiate_auth,
basic_auth, external_acl, ntlm_auth)
--enable-auth= (OPTIONS: digest, ntlm, basic, negotiate)
If someone can point
sorry for the noise .. i found it..
thanks again.
On Tue, Jun 30, 2009 at 1:24 PM, Beavispfu...@gmail.com wrote:
Hi,
I'm looking for the ldap_auth option for squid 3.0. all i see on the
./configure options are the following
--enable-basic-auth-helpers= (OPTIONS: digest_auth,
If you need multiple SSL certs, you need a different IP/tcp port combo
for each certificate.
If all your backend servers are within a single domain, a wildcard
cert may do the trick.
-C
On Jun 30, 2009, at 3:07 PM, Mario Remy Almeida wrote:
Hi All,
Would like to know if its possible to
goody goody wrote:
Hi there,
I am running squid 2.5 on freebsd 7,
As Adrian said, upgrade. 2.6 (and 2.7) support kqueue under FreeBSD.
and my squid box respond very slow during peak hours. my squid machine have
twin dual core processors, 4 ram and following hdds.
Filesystem Size
On Tue, 30 Jun 2009 17:08:48 +0200, Silamael silam...@coronamundi.de
wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello there,
Will the paths on the HTTP-Server also change?
No. We are only considering a change to the snapshots location for HTTP.
But that is not happening yet.
Hi,
I encountered a strange problem in using sibling squids as accelerators.
I have two accelerator squids, A and B (on two different boxes). They
are set up as sibling cache peers which both point to the same parent
cache_peer origin content server. I used the following commands to run
my test:
On Tue, 30 Jun 2009 18:35:09 +0200, Henrik Nordstrom
hen...@henriknordstrom.net wrote:
tis 2009-06-30 klockan 15:13 +1200 skrev Amos Jeffries:
On Mon, 29 Jun 2009 18:50:30 -0700 (PDT), Chudy Fernandez
chudy_fernan...@yahoo.com wrote:
I think this well help
acl maxcon maxconn 4
acl
I am using version 3.0 stable 16.
-Original Message-
From: Lu, Roy [mailto:r...@facorelogic.com]
Sent: Tuesday, June 30, 2009 5:24 PM
To: squid-users@squid-cache.org
Subject: [squid-users] Strange problem with sibling squids in
accelerator mode
Hi,
I encountered a strange problem in
Theoretically suppose to work. although it limits 4 connection but the download
doesn't finish.
I wonder how site's replied that gave 4 connections when I'm requesting 16.
http code 416? or 408...
- Original Message
From: Amos Jeffries squ...@treenet.co.nz
To: Henrik Nordstrom
header:
X-Cache HIT from Server
the following doesn't work
acl hit rep_header X-Cache HIT\ from\ Server
or
acl hit rep_header X-Cache HIT.from.Server
or even
acl hit rep_header X-Cache HIT.*Server
it only match for
acl hit rep_header X-cache HIT
I'm using this for
log_access deny hit
I'm
35 matches
Mail list logo