Hi,
I only modified the helper line as follows:
auth_param ntlm program /usr/bin/ntlm_auth --helper-protocol=squid-2.5-ntlmssp
and added the following two statements, the rest of the file is unchanged.
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
acl authenticated proxy_auth
donovan jeffrey j wrote:
Greetings
compiled 3.1.1 on 2 OSX machines, both running 10.5.8 one is transparent
the and the other is straight up.
build went fine. no errors.
fired up squid ( squid -d1x )
clients connected but as soon as a request for a site came through I got
a ton of these on
Dear All,
Please guide me in regard to SSO setup with Active Directory(No winbind/Samba).
I have the following questions in this regard.
1. Creating a Kerberos service principal and keytab file that is used by the
Squid what is the effective method? Difference between using Ktpass vs
Milan wrote:
We are Squid ported for windows and are experiencing issue with one
particular service. GotoMeeting, GotoAssist, GotoWebinar(Citrix) We
are unable to get users connected unless we add the individual IP
Address of the servers individually:
216.115.208.0 / 20
216.219.112.0 / 20
On 05.04.10 10:03, Sabyasachi Ruj wrote:
Well, I have implemented the client which can connect to IMAP via
squid. You just need to use CONNECT method of HTTP protocol.
If you see FileZilla, it can also connect to SFTP via squid.
can you at least answer my question, why do you need it? do you
Mike Leong wrote:
I have this weird problem where if I go though squid, a page would
stall until it hits the read timeout limit. This only happens on
certain webservers.
eg:
read_timeout set to 120 seconds.
1. request page on browser
2. page load stalls
3. after 120 seconds, squid sends a
Henrik Nordstrom wrote:
tis 2010-03-30 klockan 09:07 -0300 skrev Leonardo Carneiro - Veltrac:
I keep hearding that squid 3.0 is no speed demon, but the new squid
3.1.1 is said to be much faster. Have anyone benchmarked the 3.1.1
against the 2.7?
Not sure there has been any recent benchmarks,
Because of the same reason why FileZilla, Skype, or many such software
need it. We are writing a software which connects to mailbox using
IMAP. And many users have reported that they can connect to Internet
only using a proxy. Most of them are using squid.
I wanted to connect to a IMAP server
On 25.03.10 09:05, Dayo Adewunmi wrote:
How do I set squid to always allow the user's LAN IP to be included
in outgoing email headers? Sometimes the LAN IP is there, sometimes it
isn't.
what e-mail headers? Squid is a HTTP proxy and does not know anything about
e-mail.
And when it isn't,
Hello All,
I am having a serious problem with my E-mail programmes, none of my e-mails
are going out
If I send e-mail from my website, they are not delivered as they used to
Confirmation, Subscription emails etc.. are not delivered
Is there anything that needs doing in order to allow those
hey people;
i am trying to build squid-2.7stable9 tproxy
with a bridge setup. The kernel i m using is 2.6.30.10 custom compile
with tproxy support ( not patch as i am guessing the tproxy support is
there ). squid 2.7stable9 keeps giving me error:
WARNING: Cannot find TPROXY headers, you
a...@gmail wrote:
Hello All,
I am having a serious problem with my E-mail programmes, none of my
e-mails are going out
If I send e-mail from my website, they are not delivered as they used to
Confirmation, Subscription emails etc.. are not delivered
Why use a HTTP proxy for SMTP?, why dont
Hola .lista alguien sabe donde puedo bajar o conseguir alguna lista de
refresh_... ya definida para agregar a mi squid ?
Hi Jorge,
I am not actually using a proxy for smtp, but my websites do send emails on
a regular basis
on a subscriptions, email confirmation and so on Now if for example a
user registers he won't get an email to allow him/her to activate his/her
account
I have not set a proxy server for a
a...@gmail schrieb:
Hello All,
I am having a serious problem with my E-mail programmes, none of my
e-mails are going out
If I send e-mail from my website, they are not delivered as they used to
Confirmation, Subscription emails etc.. are not delivered
Is there anything that needs doing in
Hi Bilal,
It is a bit more complicated. it is not a pure Kerberos authentication but
a Negotiate/Kerberos authentication.
If you have a Windows client and the proxy send WWW-Proxy-Authorize:
Negotiate the Windows client will try first to get a Kerberos ticket and if
that succeeds sends a
Hi there,
Thanks for your reply
I don't know how much you read of my post but maybe I need to explain a
little bit more
Picture this right?
My websites were working, and I mean everything was working and that
includes e-mails
Because I used to send e-mail almost everyday, I don't have to
SMAIL-GMAIL schrieb:
Hi there,
Thanks for your reply
I don't know how much you read of my post but maybe I need to explain
a little bit more
Yes, I did read this post.
The problem is that squid is simply incapable of doing what you are
telling us - unless you configure it badly in a lot of
I noticed that running squid -k reconfigure starts a new authentication
helper, but does not shut down the old one.
Is this normal behavior? Do I just need to monitor for the closing of the input
stream and shut down on that cue?
Just wanna make sure I'm on track.
Dave
p.s. if there are any
Hello alltogether
Squid seems to be running smoothly at our school now. We have also made
the necassary adjustments to our Aktive Directory, so that every user
will use the proxy. SSO is also working.
At the moment there are holidays and the request rate is therefore very
slim. Next week
饶琛琳 wrote:
I have seem the
page(http://wiki.squid-cache.org/KnowledgeBase/Benchmarks), and want to
ask a question about the RPS.
My LVS tell me that the ActiveConn number of one squid is more than
200,000;the netstat command tell me the established connection number is
6;but the RPS from
sameer khan wrote:
hey people;
i am trying to build squid-2.7stable9 tproxy
with a bridge setup. The kernel i m using is 2.6.30.10 custom compile
with tproxy support ( not patch as i am guessing the tproxy support is
there ). squid 2.7stable9 keeps giving me error:
WARNING: Cannot find
mån 2010-04-05 klockan 23:28 -0700 skrev Ayhan Molla:
Hi,
I only modified the helper line as follows:
auth_param ntlm program /usr/bin/ntlm_auth --helper-protocol=squid-2.5-ntlmssp
and added the following two statements, the rest of the file is unchanged.
# INSERT YOUR OWN RULE(S) HERE TO
tis 2010-04-06 klockan 14:38 +0530 skrev Sabyasachi Ruj:
Because of the same reason why FileZilla, Skype, or many such software
need it. We are writing a software which connects to mailbox using
IMAP. And many users have reported that they can connect to Internet
only using a proxy. Most of
Probably this a bug w/ Virtualbox's NAT setup. The stalling was only
happening to sites on the same subnet as the browser.
mike
On 4/6/2010 1:49 AM, Amos Jeffries wrote:
Mike Leong wrote:
I have this weird problem where if I go though squid, a page would
stall until it hits the read
tor 2010-03-18 klockan 12:28 +0530 skrev jayesh chavan:
Apache is uses as webserver and squid as normal proxy.Squid uses
parent proxy 192.168.7.253:3128 and my squid address is
192.168.7.236:8080
I would guess you need
acl to_localhost dst 127.0.0.1
always_direct allow to_localhost
telling
tis 2010-04-06 klockan 13:49 -0700 skrev David Parks:
I noticed that running squid -k reconfigure starts a new authentication
helper, but does not shut down the old one.
It does.
Is this normal behavior? Do I just need to monitor for the closing of the
input stream and shut down on that
Dear Markus,
That cleared/explained a lot to me and given me direction for developing a
better understanding of the whole concept. Thanks a lot.
regards,
Bilal
To: squid-users@squid-cache.org
From: hua...@moeller.plus.com
Date: Tue,
Hi All,
In our environment currently we are using ISA server with userbased
authentication. we are using windows 2003 Active Directory and almost all of
the users are using Windows based OS. We want to seemlessly migrate our users
to Squid.
I have not yet reached to any conlusion despite lot
29 matches
Mail list logo