Amos Jeffries wrote:
Amos Jeffries wrote:
Etienne Pretorius wrote:
Hello all,
I am just wandering, if you have multiple uplinks to your provider
can you make squid send a probe for each request on all the links and
then let it use the fastest link to retrieve HTTP data? I suspect
Hi ,
thanks for your replies...
if I check the mark in internet options to bypass proxy for local address I'am
able to get through our intranet and other local sites, and also if I uncheck
the mark won't browse intranet - which means that the second proxy works fine...
However I'am not able to
On Wed, Jun 4, 2008 at 2:48 PM, Armend ALIAGA [EMAIL PROTECTED] wrote:
Hi ,
thanks for your replies...
if I check the mark in internet options to bypass proxy for local address
I'am able to get through our intranet and other local sites, and also if I
uncheck the mark won't browse intranet
Sir,
I want to use ZPH and control traffic out side squid using HTB,ESFQ etc..
can some body guide me in this direction.
Thanks a lot ,
Rayudu
_
NEW! Get Windows Live FREE.
http://www.get.live.com/wl/all
Kirtimaan wrote:
Hello Amos,
Thanks for reply. How I can check if any log restriction is applied or
not ?
The options I mentioned will have ACL on them in your squid.conf.
I don't face any problem accessing internet using system as a gateway
and DNS while SQUID is running.
Does it
when using the acl type rep_mime_type, are the mime_type cases
sensitive or INsensitive ?? At least on squid.conf i couldnt find the -i
option on it's documentation as well as nothing saying about it being
case sensitive or insensitive.
--
Atenciosamente / Sincerily,
Rayudu Madhava wrote:
Sir,
I want to use ZPH and control traffic out side squid using HTB,ESFQ etc..
can some body guide me in this direction.
Thanks a lot ,
Rayudu
The configuration of squid is done in 2.7+ with a few zph_* options,
which can be found in the authoritative config
Amos Jeffries wrote:
Rayudu Madhava wrote:
Sir,
I want to use ZPH and control traffic out side squid using
HTB,ESFQ etc..
can some body guide me in this direction.
Thanks a lot ,
Rayudu
The configuration of squid is done in 2.7+ with a few zph_* options,
which can be found in
Leonardo Rodrigues Magalhães wrote:
when using the acl type rep_mime_type, are the mime_type cases
sensitive or INsensitive ?? At least on squid.conf i couldnt find the -i
option on it's documentation as well as nothing saying about it being
case sensitive or insensitive.
I think its
On ons, 2008-06-04 at 15:10 +1200, Amos Jeffries wrote:
I'm not sure what the effect on credentials would be exactly. But it's
always my first port of call when troubleshooting bits that are supposed
to run using the IE settings.
WinHTTP onlydoes NTLM to servers in the proxy exclusion list.
Hi,
I'm currently using squid 2.5.STABLE14, in transparent mode, and when i try=
to use the google earth application it says i can't login to server.
Looking into the squid logs, i found this :
LAN_IP_Computer d kh.google.com/geauth
Is there any way to bypass this issue?
Thanks,
Bruno
I have not been following this thread closely so if this is wrong please
ignore.
We saw an issue whereby with using NTLM auth Windows Media Player would not
talk NTLM and fell back to basic.
The issue is caused by a MS bug (found on an MS forum) the fix is that you
must use a NETBIOS name for
Hi Guy,
A lot of tutorial on the Internet teach you how to config Squid as a
reverse proxy,
such as I followed this article:
http://wiki.squid-cache.org/SquidFaq/ReverseProxy,
stuffs seems to be working for me, but I think I might need some
tweaks but I found it
difficult to find those
Errarta:
www/images2
[Should be in realtime updating if the file has been chaned, currently
nothing set and Last Modified header is sent out automatically by
apache]
Dear Squid Masters,
I am using an FC6 gateway-router where squid2.6STABLE12 was (and only
WAS) running properly.
It connects to two ISPs via two different ADSL modems. Both ISPs used
non-transparent proxies which are not interchangable.
They both required the use of a proxy (only from their
tor 2008-06-05 klockan 00:59 +1200 skrev Amos Jeffries:
I think its case-insensitive. Mime RFC defined as SHOULD BE lower-case
and its most often written that way.
It's a regex acl, so -i is needed for case-insensitive operation.
-i applies to all regex based acls in Squid.
Regards
Henrik
tor 2008-06-05 klockan 00:19 +0800 skrev howard chen:
1. Is it true Squid will only use the Last Modified and Cache Control
header for caching,
Yes.
other headers are not important in my setup?
Well.. don't send conflicting Expires or Pragma: no-cache headers..
2. I found that Squid will
tor 2008-06-05 klockan 00:22 +0800 skrev howard chen:
www/images2
[Should be in realtime updating if the file has been chaned, currently
nothing set and Last Modified header is sent out automatically by
apache]
Then configure Apache to send a quite small Cache-Control: max-age=N
heder,
ons 2008-06-04 klockan 23:52 +0700 skrev Dream Prince:
Now the problem is -
The first ISP, subscribed at 512kbps, changed their proxy from
non-transparent to transparent (it even changed the ip and port). It
has already blocked the use of public proxies since years ago.
Have you tried asking
Hi,
On Thu, Jun 5, 2008 at 2:15 AM, Henrik Nordstrom
[EMAIL PROTECTED] wrote:
tor 2008-06-05 klockan 00:19 +0800 skrev howard chen:
1. Is it true Squid will only use the Last Modified and Cache Control
header for caching,
Yes.
other headers are not important in my setup?
Well.. don't
Hello,
This is the first time I have posted on this list, so hello to
everyone. I have been trying to get squid_kerb_auth to work on Mac
OS X 10.4.11 and I cannot seem to figure out the reason it fails.
Here are the options I had set for the configure part of squid:
Squid Cache: Version
Hello List,
This just to save time from someone that might be having the same
problems I had.
INFO-1
SAMBA 3.0.29 and 3.0.30 has a bug and NTLM DOES NOT if Winbind and Squid
are both running in the PDC/BDC.
(https://bugzilla.samba.org/show_bug.cgi?id=5489)
INFO-2
AVG 8.0 Antivirus has a
Hi
The problem I have is that squid doesn't proxy https, when I brouse
https://login.yahoo.com/config/login_verify2?.intl=es.src=ym I receive the
following message
ERROR
The requested URL could not be retrieved
On tor, 2008-06-05 at 02:48 +0800, howard chen wrote:
The following is my understanding (correct me if I am wrong)
1. When Apache send Expire =... thru Squid, if it is future time, then
client won't issue any request to the server side again for the same
resource (unless you press F5 to
On ons, 2008-06-04 at 12:11 -0700, Alex Morken wrote:
2008/06/03 13:47:39| squid_kerb_auth: Got '[EMAIL PROTECTED]' from
squid (length: 15).
You can't test the helper like this. You need to send it an Kerberos
GSSAPI blob using a special request format very similar to that used for
NTLM
On ons, 2008-06-04 at 14:33 -0700, wordaz83 wrote:
The problem I have is that squid doesn't proxy https, when I brouse
https://login.yahoo.com/config/login_verify2?.intl=es.src=ym I receive the
following message
Connection to 69.147.112.160 Failed
The system returned:
(110)
On Jun 4, 2008, at 3:06 PM, Henrik Nordstrom wrote:
On ons, 2008-06-04 at 12:11 -0700, Alex Morken wrote:
2008/06/03 13:47:39| squid_kerb_auth: Got '[EMAIL PROTECTED]' from
squid (length: 15).
You can't test the helper like this. You need to send it an Kerberos
GSSAPI blob using a special
On ons, 2008-06-04 at 15:41 -0700, Alex Morken wrote:
Thank you Henrik. I kind of figured it needed something else, but I
wasn't sure what to put there. Where can I get or generate the
Kerberos GSSAPI blob I need for the input? I have been digging
around kerberos docs and haven't
I'm having a problem with my Squid setup when trying to download files from an
IIS-based site. Basically, when I attempt to download something on my intranet
(through my Squid setup) to the IIS sites in question, the downloads may go
about 99% of the way through before it just stalls out (at
Sorry, but I'm resending this because I accidentally cut off the last portion
of the e-mail that shows the tcpdump output from a successful download from the
proxy itself. Sorry again:
I'm having a problem with my Squid setup when trying to download files from an
IIS-based site. Basically,
Hi,
On Wed, 2008-05-21 at 15:51 +1200, Amos Jeffries wrote:
On ons, 2008-05-21 at 02:13 +1200, Amos Jeffries wrote:
You will need to upgrade to 2.6 or 3.0 to communicate with those servers
through squid.
Do we have support for chunked encoding in 3.0? I thought that was 3.1
only?
Hi,
I'm experimenting with ESI Squid 3 configured as a reverse-proxy.
I'd appreciate it if anyone could help with the questions below...
* Is Squid + ESI being used in production? Should I expect problems if
I decide to deploy with ESI?
* Is there a way to use relative URLs inside an ESI
Hi,
I'm currently using squid 2.5.STABLE14, in transparent mode, and when i
try= to use the google earth application it says i can't login to server.
Looking into the squid logs, i found this :
LAN_IP_Computer d kh.google.com/geauth
Is there any way to bypass this issue?
Possibly.
I have been asked to monitor what is going out via ftp from our lan.
Is squid a good choice to monitor this traffic? Is there something
better?
tor 2008-06-05 klockan 00:59 +1200 skrev Amos Jeffries:
I think its case-insensitive. Mime RFC defined as SHOULD BE lower-case
and its most often written that way.
It's a regex acl, so -i is needed for case-insensitive operation.
-i applies to all regex based acls in Squid.
Which means
I have been asked to monitor what is going out via ftp from our lan.
Is squid a good choice to monitor this traffic? Is there something
better?
Squid only acts as a gateway between web browsers and FTP servers. It does
not proxy native FTP traffic.
Your best bet would be a dedicated FTP
Hi,
On Wed, 2008-05-21 at 15:51 +1200, Amos Jeffries wrote:
On ons, 2008-05-21 at 02:13 +1200, Amos Jeffries wrote:
You will need to upgrade to 2.6 or 3.0 to communicate with those
servers
through squid.
Do we have support for chunked encoding in 3.0? I thought that was 3.1
only?
I'm upgrading Squid from 2.5Stable14 to 2.6Stable20, and Samba from
3.0.14a to 3.0.30. I'm also upgrading the OS from Solaris 8 to 10. We use
winbind to authenticate Squid users to a Windows domain.
As per the squid/samba instructions, I've run the command
'/usr/local/samba/bin/net rpc -S
Hello Amos,
Does it stop working when Squid not running?
To my surprise, I can use internet even when squid service is down. So
now it means that squid is not configured properly ?
How I can verify this, please guide.
Thanks,
Kirtimaan
Amos Jeffries wrote:
Kirtimaan wrote:
Hello Amos,
Hi,
I'm experimenting with ESI Squid 3 configured as a reverse-proxy.
I'd appreciate it if anyone could help with the questions below...
* Is Squid + ESI being used in production?
It's a bit before my time but I believe the initial sponsors were using
it. At least until development on it
Sorry, but I'm resending this because I accidentally cut off the last
portion of the e-mail that shows the tcpdump output from a successful
download from the proxy itself. Sorry again:
I'm having a problem with my Squid setup when trying to download files
from an IIS-based site.
Sorry, but I'm resending this because I accidentally cut off the last
portion of the e-mail that shows the tcpdump output from a successful
download from the proxy itself. Sorry again:
I'm having a problem with my Squid setup when trying to download files
from an IIS-based site.
Hi
The problem I have is that squid doesn't proxy https, when I brouse
https://login.yahoo.com/config/login_verify2?.intl=es.src=ym I receive
the
following message
ERROR
The requested URL could not be retrieved
Hello Amos,
Thanks a lot for the feedback.
Regards,
--
Adriano
Kirtimaan wrote:
Hello Amos,
Does it stop working when Squid not running?
To my surprise, I can use internet even when squid service is down. So
now it means that squid is not configured properly ?
How I can verify this, please guide.
You have already verified. It's definitely an
Thanks, all roads seem to go to FROX.
On Wed, Jun 4, 2008 at 7:51 PM, Amos Jeffries [EMAIL PROTECTED] wrote:
I have been asked to monitor what is going out via ftp from our lan.
Is squid a good choice to monitor this traffic? Is there something
better?
Squid only acts as a gateway between
To my surprise, I can use internet even when squid service is
Thanks,
Kirtimaan
Amos Jeffries wrote:
down. So
now it means that squid is not configured properly ?
How I can verify this, please guide.
Could you pls draw your network diagram?
How many ethernet does squid box have?
Hope to
48 matches
Mail list logo