Ok then, I've just test again the Ulimit command with the correct syntax and
it's working perfectly.
It was my bad, the Debian Distrib need the following syntax: ulimit [Options]
Amount of FD BUT in fact the command is ulimit -SH -n 256000 instead of the
ulimit -SHn 256000 as we could believe
Hi to all,
i'm of the squid world. I have some question for you. I explain my problem.
I have an application, intalled in one server A, that use openlayer library
for load data tiles from a second server B.The second one server have 3
server
alias name:
a.mydomain.eu
b.mydomain.eu
On 24/05/11 13:10, Malvin Rito wrote:
Thanks, Could you send me a procedure on how to do this via Redhat box
firewall.
Using iptables to block HTTPS is:
iptables -t filter -I PREROUTING 1 -p tcp --deport 443 -j REJECT
You will have to contact RedHat or more specific support channels for
On 24/05/11 19:36, gaël therond wrote:
Ok then, I've just test again the Ulimit command with the correct syntax and
it's working perfectly.
It was my bad, the Debian Distrib need the following syntax: ulimit [Options]
Amount of FD BUT in fact the command is ulimit -SH -n 256000 instead of the
Hi All:
I use squidclient to clear single file cache.
Does anyone know how to clear all the cached files under one
folder?
Thanks
Best Regards!
---
Green Wang
On 24/05/11 22:31, Wang Shiqiang wrote:
Hi All:
I use squidclient to clear single file cache.
Does anyone know how to clear all the cached files under one
folder?
Defined folder please. URL path level? cache_dir location? cache_dire
sub-directory?
Amos
--
Please be
No problems, it's been my pleasure, you helped me (and John Doe also), I help
you.
That the way the thinks should work ;)
See ya later folks !
- Mail original -
De: Amos Jeffries squ...@treenet.co.nz
À: squid-users@squid-cache.org
Envoyé: Mardi 24 Mai 2011 11:09:05
Objet: Re:
Hi,
When using sslbump and encounter a bad server cert, the squid can choose to
deny or allow such error. Some static ACL can be used to choose the sites that
the squid would tolerate a bad cert. However, such acl is like a fixed list in
the configure. Every time the user encounter a new
E.g. if the server cert has expired, sign an expired squid cert to the
browser. At least this will reproduce the same behavior as if the
sslbump is not turned on. The browser will warn the certificate problem
and the user can proceed at his own risk. The squid administrator can be
kept out of
Hi Alex,
One question about sslbump implementation, was the client side cert exchange
done before squid start the ssl to the server? If so, it might be too late when
squid learns that the server cert is not good. The client side cert was already
sent out.
If the client side cert was exchanged
Hi list.
We would like to know whats the best practice when we have more than 3000 rules
on our squid. Right now squid takes more than 15 minutes to start or restart,
we think that's because we have a lot of rules.
The question is:
If we change all that rules to a text file, squid will start
Hi Everyone,
I have a bit of an issue that I am trying to resolve with Squid, but I
cannot quite get the hang of things. I was wondering if someone could
help me out or point me in the right direction.
I have a simple piece of hardware that uses a web interface. This
hardware only uses http
Hello,
I'm having an issue with Squid, Is it possible to add a username and
password onto the IP range, so the user is asked to login before using
the IP? If so, could you tell me how, please!.
Thanks!
Andrew.
Hi Andrew.
We usually use radius server for the authentication we don't pay attention to
IP's only the usernames and passwords.
If you need assistance with the radius server please let me know.
Regards.
Alfonso.
-Mensaje original-
De: Andrew Gilfillan
Am 24/05/2011 21:36, schrieb Andrew Gilfillan:
Hello,
I'm having an issue with Squid, Is it possible to add a username and
password onto the IP range, so the user is asked to login before using
the IP? If so, could you tell me how, please!.
HOla :) consultoria!!
We did have the same problem, from 15 mins we reduce up to 30 seconds,
Squid 3.0 and 3.1 has a feature, that they stop all traffic until the hole set
of ACL are processed, there is not much to dup than acl
optimization/reducction in a single-box scenario.
LD
Le mardi
Hey everyone,
I figured out what was going on and have everything working smoothly.
for future references, here's what I did:
1.) configure squid. Here's the relevant chunk of the config:
---
https_port 443 cert=/usr/misc/certs/squid.cert
key=/usr/misc/certs/squid.pem
On 25/05/11 11:07, Anna K. Hegedus wrote:
Hey everyone,
I figured out what was going on and have everything working smoothly.
for future references, here's what I did:
1.) configure squid. Here's the relevant chunk of the config:
---
https_port 443 cert=/usr/misc/certs/squid.cert
I've encountered this strange error situation and would appreciate any
attempts to shed light on the issue.
I've got a squid service running on Windows Server 2003 (this squid
service has been running since October 2008) and just the other day
(after a power cut) the service will no longer start.
-邮件原件-
发件人: Amos Jeffries [mailto:squ...@treenet.co.nz]
发送时间: 2011年5月24日 18:37
收件人: squid-users@squid-cache.org
主题: Re: [squid-users] How to clear all the cached files under a folder
On 24/05/11 22:31, Wang Shiqiang wrote:
Hi All:
I use squidclient to clear single file
I've tried an absolutely fresh install of squid and still get a 1067
error when starting the service. There is now nothing written to
squid.exe.log but cache.log includes the text below:
2011/05/25 13:54:39| Starting Squid Cache version 2.7.STABLE8 for
i686-pc-winnt...
2011/05/25 13:54:39|
it depends on the machine...
to make sure that the 3000 rules loading is the problem you can run the
squid server on a verbose mode to see how long it takes to load the rules.
from what i have seen the stop process depends less on the amount of
rules but on the amount of connections used on
Seeing as I don't have any neighbour caches, I set htcp_port 0 and
things seem to be OK. It still seems odd that this issue came up, I'm
wondering if maybe some Windows update altered some behaviour in
regard to allowing the binding required?
On 25 May 2011 13:58, Rhys Evans rhys.ev...@gmail.com
well i just used wget to download
http://www.bandiweb.it/Left.asp
and it's got stuck after couple of seconds without squid or cache(in my
zone)
almost must be a site problem.
cause it's only
http://www.bandiweb.it/Left.asp
and not other parts of the site.
On 20/05/2011 18:36, Brian
every asp part of the site..
http://www.bandiweb.it/RegistrazioneProva.asp
also... the same
contact the site manager.
On 20/05/2011 18:36, Brian Tuley wrote:
I'm running squid proxy 2.7 and that site is almost unresponsive to me as well.
Works fine when I bypass squid however.
I've been
25 matches
Mail list logo