Hello Again,
Thanks for the great and timely help Daniel. Finally adjusted the BLF
lights. Only couple of things, which I'm sure are some functions missing
the call flow, are:
1- When users register or un-register the BLF don't update anything though
NOTIFY are triggered.
2- When call comes from
Hello,
ok, good that is working better now.
I will also look more into these module in the near future. I think the
Expires value must be different based on state, e.g., trying and ringing
should be shorter than active call.
Cheers,
Daniel
On 10/02/15 10:27, SamyGo wrote:
Hi Daniel,
This has
Hi Daniel,
This has helped us substantially, I've added few more lines in the config
and seems we've working BLF now. I'll share the results when we complete
the tests.
Thanks alot for the timely help.
BR,
Sammy
On Mon, Feb 9, 2015 at 11:24 AM, Daniel-Constantin Mierla mico...@gmail.com
wrote:
Hello,
went and configured a server for BLF as the logs were not showing any
obvious issue.
The result was that the way module parameters were set or have default
values was creating this situation.
The story is that the pua_dialoginfo takes the dialog lifetime to set
the expires for PUBLISH.
Btw, there is no 'debug' message -- have you set debug=3?
Daniel
On 06/02/15 10:26, Daniel-Constantin Mierla wrote:
Hello,
the log doesn't show the messages from the INVITE to the BYE. Are you
sure you got them for the entire call? There are notes from syslog
that there are rate limits,
Hello,
the log doesn't show the messages from the INVITE to the BYE. Are you
sure you got them for the entire call? There are notes from syslog that
there are rate limits, dropping logs.
Also, I noticed errors printed by t_check_trans(), are you using it from
a branch_route? Eventually you can
Hi community,
I'm dealing with a problem here related to presence module handling BLF. My
BLF phones are Yealink T28p with latest firmware and work perfectly with
Asterisk and FreeSwitch but not with Kamailio as expected.
What I'm observing here is a malfunctioning statuses due to accumulation
Hello,
can you reproduce this with three phones (not to get too much traffic)?
Use debug=3 in kamailio.cfg and send to me all the logs from kamailio
start. I will look to see what happens.
Cheers,
Daniel
On 05/02/15 22:21, SamyGo wrote:
Hi community,
I'm dealing with a problem here related
Hi Daniel,
Thanks alot for your time, please see the log file attached.
If needed, I can provide sip captures received at the phone .
Thanks,
On Thu, Feb 5, 2015 at 4:42 PM, Daniel-Constantin Mierla mico...@gmail.com
wrote:
Hello,
can you reproduce this with three phones (not to get too
Here are the contents of the presentity table for the test call.
On Thu, Feb 5, 2015 at 5:54 PM, SamyGo govoi...@gmail.com wrote:
Hi Daniel,
Thanks alot for your time, please see the log file attached.
If needed, I can provide sip captures received at the phone .
Thanks,
On Thu, Feb 5,
10 matches
Mail list logo
