Dear all
I have problem with Sun Storage 3320.I want to change the Hard disk on it
but I know onle the logical address c?t?d?s? how can I find the physical
disk on the storage .
I try to change the led color by bellow command but because the storage is
defined as primary the command is not
Hi,
We are seeing the same problem. Access to the ZFS volumes is nonexistant. You
can ssh to the machine, but you cannot reboot properly.
Also using two LSI 9240-8i SAS cards and L2ARC with SSD's.
Were gonna try move the SSD's off the Raid card.
--
This message posted from opensolaris.org
On Mon, May 3 at 13:36, alireza milani wrote:
Dear all
I have problem with Sun Storage 3320.I want to change the Hard disk on it
but I know onle the logical address c?t?d?s? how can I find the physical
disk on the storage .
I try to change the led color by bellow command but because
On Mon, May 3, 2010 at 11:06 AM, alireza milani
milani.alir...@gmail.com wrote:
Dear all
I have problem with Sun Storage 3320.I want to change the Hard disk on it
but I know onle the logical address c?t?d?s? how can I find the physical
disk on the storage .
The disks are at fixed locations in
Just wanted to start a thread to publish some performance numbers here with a
new test setup that I have been playign with and get some input as the
performance I am seeing is very puzzling.
I am copy pasting most of this from a thread on another forum since we are kind
of at a dead end over
Apparently i hit a character limit in the first post... Here is the rest of it.
Batch two of testing;
Well I have some odd numbers again... what a surprise :mad:
12 disk strip with no expander, HBA and 4 onboard.
[CODE]
10Gb Read
IO Summary: 23308 ops, 384.6 ops/s, (385/0 r/w) 384.6mb/s,
On Mon, 3 May 2010, The Big T wrote:
Based on 50MB/s write per disk the stripe should be pulling ~700MB/s
I must be hitting a bottleneck of a wall here somewere and would like to track
it down.
Watching the box access LEDS during a long write is interesting as
well... the data access/write
I have the same issue with a new LSI 9240-8i with the imr_sas 3.01 (MegaRAID
Release 4.2) driver from 26-JAN-19 downloaded from
http://www.lsi.com/channel/products/megaraid/sassata/9240-8i/index.html.
I am not doing any hot swapping, but see the same kernel panic from
kmem_alloc_160 when I
I have updated the card firmware as was able to enable the auto-snapshots.
$ pfexec zpool export tank1
$ pfexec /usr/local/bin/CLI/MegaCli -adpfwflash -f Falcon_FW_Image.rom -a0
Adapter 0: MegaRAID SAS MR9240-8i
Vendor ID: 0x1000, Device ID: 0x0073
Package version on the controller: 20.1.1-0047
