on 1/25/06 8:36 AM, Paul A. Corsa at [EMAIL PROTECTED] wrote:
Am I the only one having difficulty signing on to the new Google Site? I
go to the Join Page, enter my present e mail address, start entering a
password and the computer locks up? After a hard restart, if I return
to the same
I use an ADS Tech Dual-Link USB 2.0/Firewire card. It work great in OS9 and
OSX - note that the card only operates as USB 1.1 in OS9 (which is the case
for all cards). I've have it for a couple of years now in my S900 with
various perpherals (FW Pioneer DVD-R, FW hardrive, USB Epson 740 printer,
on 10/28/05 7:35 AM, triples at [EMAIL PROTECTED] wrote:
Fellow Listers -
Yes, another post about USB.
I have a vintage S900L running OS 9.1 (400 MHz G30 with what I
think are the current USB extensions.
They are:
HID Library 1.4.4
Serial ShimLib 1.4.6
USB Device Extension 1.5.6
on 10/6/05 11:04 PM, John Tamine at [EMAIL PROTECTED] wrote:
THREE things i learned today. the IOGEAR usb2 card DOES work under OS9
(and even 8.6) with the extension i downloaded from version tracker.
and i can always count on the folks on this list to help me out. and
the old saying,
on 10/2/05 8:58 PM, John Tamine at [EMAIL PROTECTED] wrote:
IIRC, you have to install a specific USB extension set to have your
system recognize the
PCI card, as opposed to just the standard USB drivers which only
recognize the built-in
USB ports on real Macs. Did you do this before you
on 10/2/05 3:31 AM, Paul Corsa at [EMAIL PROTECTED] wrote:
If you look at all the choices under Custom Install in OS 9.1 you'll
find the option Steve mentions. It's just a matter of checking a box.
Steve Hardy wrote:
--- Gregg Gorrie [EMAIL PROTECTED] wrote:
IIRC, you have
on 9/30/05 6:14 AM, BigMomma at [EMAIL PROTECTED] wrote:
Hi All.
Would anyone on the list know if it is possible to use a USB 2 card
in our S900 machines? If it is possible, would I just replace the
one that I have with the newer card?
Thanks
Jacqueline
As far as I know, the card will act
on 6/20/05 6:55 PM, Ansberry at [EMAIL PROTECTED] wrote:
Wow! 2 posts in one night. That is a record for me. I usually lurk on
this list because there are so many more knowledgable people here than I am.
I am a neophyte digital video person and have been learning to convert
my family
on 6/17/05 12:40 PM, E Hoffman at [EMAIL PROTECTED] wrote:
Hi,
This post is a little late (my initial ones were bounced back to me for
some reason), but thanks to Jeff W. and Dan A. for your responses to my
earlier post about the drive I added to my new S900 (taken out of my old
S900 that
on 6/16/05 4:33 PM, Jacqueline Stewart at [EMAIL PROTECTED] wrote:
Hi All.
Would anyone have any idea why I get a message waiting for remote
debugger when I try to start up in Panther? I can't get any of my
Panther drives to start up. Any help greatly appreciated.
Also I can't get a disk out
on 5/10/05 8:39 PM, E Hoffman at [EMAIL PROTECTED] wrote:
Hi Robert,
I've tried everything you suggested escept removing the RAM chips, which I
thought about doing but balked as I remember how firmly they seated themselves
when I put them in over the past couple years. I will try it
on 4/28/05 5:40 PM, Eric Ladner at [EMAIL PROTECTED] wrote:
I did and after that, I could NOT keep the clock time
to stick with the right hours. It keep reverting to 5
hours off the clock.
If it consistently resets to 5 hours off, I would think that there must be
an issue with your local time
on 4/26/05 5:12 PM, John Hobbs at [EMAIL PROTECTED] wrote:
On 25 Apr 2005, at 23:10, sieg wrote:
When I then try to launch the OS instlaller, I'm told that This
program
cannot run on your computer - see the documentation
I think you will need a retail version designed to install on
on 4/8/05 9:51 AM, Michael M at [EMAIL PROTECTED] wrote:
Paul Corsa wrote:
do a Clean Install of OS9.1, then import whatever you wish to
save from OS8.6. Be sure you use the same file settings(HSF or HSF+) for
both HD's or the data won't interchange.
What are the consequences of dragging
on 3/10/05 8:31 PM, [EMAIL PROTECTED] at [EMAIL PROTECTED] wrote:
Hi,
Well I guess I should have done a little searching before I asked for help
upgrading to 9.2.2 from 9.1. I found OS9 helper online, downloaded it and
the upgrades were a cinch. I've barely begun using the new system but I
on 2/21/05 11:50 AM, Gregg Gorrie at [EMAIL PROTECTED] wrote:
on 2/21/05 5:09 AM, Alan Kim at [EMAIL PROTECTED] wrote:
ansberry wrote:
I know that this old dinosaur will never really blaze through a DVD
rendering/burning, but I'd like to get it down to 10 to 12 hours. What do
you guys
on 2/21/05 5:09 AM, Alan Kim at [EMAIL PROTECTED] wrote:
ansberry wrote:
I know that this old dinosaur will never really blaze through a DVD
rendering/burning, but I'd like to get it down to 10 to 12 hours. What do
you guys think? Would I be better off with the ide133 card?
The drive
on 1/25/05 8:36 PM, Paul Corsa at [EMAIL PROTECTED] wrote:
It also told you NOT to sell of your old CPU/card when you
upgrade.Something obviously became corrupted and the Sonned Card/chip
couldn't resolve it. Paul C
Robert Kay wrote:
I got four quick responses to my problem. All of them
I just picked up four 128MB DIMMs from OWC (EDO, to match the previous four
DIMMs) to bring my S900 to up to 1GB of RAM. After installing the RAM, I
pressed the CUDA button and restarted. The machine booted but froze just at
the start of loading extentions - rebooted again with the same results.
on 12/30/04 1:11 PM, Krow Magnum at [EMAIL PROTECTED] wrote:
On Thu, 30 Dec 2004 10:59:58 -0500, BigMomma [EMAIL PROTECTED] wrote:
Hi Everyone and Happy New Year.
I was wondering if there is a limit to the size of hard drive that the
S900 can use. Best Buy has a Western Digital 250 gig for
on 12/23/04 9:42 AM, T Molnar at [EMAIL PROTECTED] wrote:
I am not that active on the list but I do look in once in a while.
I keep getting these messages (see below) and I am unsure of their
veracity, they keep popping up in my mail box.
Suggestions
happy holidays
tim
This is an
on 12/13/04 11:02 PM, Steve Hardy at [EMAIL PROTECTED] wrote:
I'd like more RAM, but right now it's not in the
cards. Between the Burner and the firewire A/V
converter, I'm pretty much way over budget as it is.
It'll have to wait a bit, unless I can find some at
the recyclers.
That said,
the actual conflict of problem. Paul C
Gregg Gorrie wrote:
on 11/4/04 11:58 PM, Will Schoumaker at [EMAIL PROTECTED] wrote:
Umax wasn't alone with the IDE controller one channel issue. The
Apple machines with IDE of that era had the same issues. This included
the 630 series 68K machines among
on 11/4/04 11:58 PM, Will Schoumaker at [EMAIL PROTECTED] wrote:
Umax wasn't alone with the IDE controller one channel issue. The
Apple machines with IDE of that era had the same issues. This included
the 630 series 68K machines among others. It even includes the Beige G3
series version 1
on 9/11/04 8:52 PM, ansberry at [EMAIL PROTECTED] wrote:
The kid who took the video had most of it on his hard drive. He sent me
the raw video files on a dvd. I may try to run it into iMovie or Final Cut
Express and see if I can get a better copy that way.
Even as it stands now, I was
on 9/8/04 10:42 PM, Eric A. Ladner at [EMAIL PROTECTED] wrote:
Is the S900's original internal CD-ROM drive (Matshita CR 506)unable
to handle audio CDs properly? Or, maybe I'm just missing something
obvious?
In OS 9.1 I can play CDs with AppleCD Audio Player, but can't find a
way to copy
on 9/6/04 5:29 PM, ansberry at [EMAIL PROTECTED] wrote:
Okay, I have not searched the archives for this info, but bear with me.
I just don't have a lot of extra time on my hands right now.
My 18 year old son was killed in a bicycle/truck accident a month ago.
I have a dvd a friend of his made
on 8/18/04 5:27 PM, Gary Gorbet at [EMAIL PROTECTED] wrote:
is also a Newer G3 400 L2 upgrade. So that's about it for the
Supermac that I bought from Small Dog in 8/97. A good machine that
hung tough and taught
A couple of years ago, I had what appeared to be a dead S900. Many
symptoms
on 7/29/04 11:51 AM, joseph pino at [EMAIL PROTECTED] wrote:
Hi,
I'm trying to get MIDI functioning in OSX on an S900. Under OS9 I've been
using a Serial Port device (MOTU Express) but the OSX Audio MIDI
application doesn't see it - I guess it's looking for a USB device? Is
there a way
on 7/28/04 1:29 PM, Mark Jay Mirsky at [EMAIL PROTECTED] wrote:
Dear List,
Help. I bought this firewire drive, a LA Cie CD RW 52X32X52
firewire. but can't get it to work either with the firewire card in my
computer an S-900 which sees everything else I attach, a Yamaha firewire
CDRW, two
on 6/26/04 2:35 PM, Paul Corsa at [EMAIL PROTECTED] wrote:
Is Norton the only software sold to defrag a HD in OS9.1? TechTool 4 is
for OSX and offers defragmentation. Are there any other alternat ways to
deftrgment a hard drive? Paul C
Alsoft Plus Optimizer (the same people that make
on 5/11/04 10:55 AM, Barry Gamble at [EMAIL PROTECTED] wrote:
I am installing a PCI ATT133 card and hard drive. Want to remove the old
original 1G drive, but the system hangs with no termination on the internal
SCII. Went to the local electronic junk store and found everything but this.
on 5/1/04 9:34 AM, [EMAIL PROTECTED] at
[EMAIL PROTECTED] wrote:
Hi folks
snip
After 4 hours of attempts to get it running correctly, I just threw
the HD on a a beige G3 that I've been doing some development on. So
the services it carried are back up and running, but the S900 is not.
I
on 4/28/04 7:08 AM, William Smith at [EMAIL PROTECTED] wrote:
Anyone know of a program for MAC what will join movie
clips together. Bill Smith
__
Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs
on 4/16/04 6:58 AM, zoetic at [EMAIL PROTECTED] wrote:
hi,
so i'm finally looking to upgrade my hard drive/controller in my S900.
or ATA/133:
SIIG Ultra ATA/133 PCI Interface any PowerMac
http://eshop.macsales.com/Catalog_Item.cfm?ID=4348Item=SIISCMP4A12
Sonnet Tempo ATA/133 PCI Host
on 4/13/04 1:13 PM, Patty at [EMAIL PROTECTED] wrote:
Wow, no one has any suggestions for me on this? I really gotta get this
machine up and running again. TIA
Patty wrote:
I just installed a replacement mother board in my S900, but now it
won't recognize any of the hard drives. I just
on 4/2/04 8:55 AM, Phillip Meza at [EMAIL PROTECTED] wrote:
Thank's Will, Let me get specific here its needed. The S900 thats
giving me problems has never run with anything above OS 9.1 I have 2
machines operating via KVM. This one has RAM totaling about 910MBs
from 3 different sources,
on 3/12/04 7:52 AM, David R. at [EMAIL PROTECTED] wrote:
One of the error messages I get consistently (I think it's in DiskWarrior)
has to do with the partition map not being valid.
Gregg, I strongly suggest you run either a Norton or TTPro diagnostic on the
drive using the IDE interface.
on 3/9/04 2:38 PM, Dennis Vermeire at [EMAIL PROTECTED] wrote:
From: Gregg Gorrie [EMAIL PROTECTED]
Date: Sun, 07 Mar 2004 17:24:40 -0800
Hi Gregg,
I'm using (or at least have tried to use) the Intech HDST v3.5 utility.
Note that HDST has recently been updated to version 3.6, the free
on 3/8/04 9:32 PM, Dean C. Hansen at [EMAIL PROTECTED] wrote:
Well, the parallels to what I read folks on this list doing to their
S900's make me think that we're a bunch of misplaced street rodders.
Excellent post - well put! I have often though of that parallel too - we put
more time and
on 3/7/04 6:45 AM, Alan Kim at [EMAIL PROTECTED] wrote:
Daevad wrote:
When you partition/format a drive under OS X, Disk Utility requires
that you specifically choose to install drivers that will also allow
the drive to be accessed under OS 9. Perhaps that was not installed?
on 3/7/04 8:08 AM, Alan Kim at [EMAIL PROTECTED] wrote:
Gregg Gorrie wrote:
Originally my FW drive came formatted with HDST v3.5 and it worked fine with
that for a long time. Once the corruption pattern started, ...
Gregg -
Just as I was getting ready to post something your msg
on 3/7/04 12:09 PM, Daevad at [EMAIL PROTECTED] wrote:
Paul Corsa wrote:
Are we talking about FWB Hard Drive Speed Tools as the drivers
provided with the drive you
purchased? The FWB drivers are known to have problems in OSX I
believe. If you are talking about the
Intech drivers please
on 3/7/04 5:38 PM, Daevad at [EMAIL PROTECTED] wrote:
I've tried both ways a number of times. The only way I can do anything
to
the drive in OS9 (without crashing or failed errors) is hooking the
drive up
to the ATA card. In OSX I can format or reinitialize using FW (but
have also
tried
on 3/4/04 1:15 PM, Will S at [EMAIL PROTECTED] wrote:
From: Gregg Gorrie [EMAIL PROTECTED]
Subject: Sonnet ATA133 issues
Date: Thu, 04 Mar 2004 12:05:37 -0800
Hi folks:
Some disappointing problems I thought this card wouldn't have:
1) It does appear to have the first 8GB requirement
Hi folks:
I thought I had been paying attention to the significant amount of postings
last fall re: the ATA card upgrade path and various issues surrounding
certain cards (a quick look at my archive shows there was still some
uncertainty). At any rate, I decided to pick up a Tempo ATA133 as I
on 2/23/04 2:20 AM, Paul F. Henegan at [EMAIL PROTECTED] wrote:
on 21.02.2004 16:49, Gregg Gorrie at [EMAIL PROTECTED] wrote:
on 2/20/04 3:40 PM, Will S at [EMAIL PROTECTED] wrote:
1) Is there any advantage to using Classic mode rather than just
re-booting into OS9.2.2 off my other hard
on 2/21/04 8:57 PM, ansberry at [EMAIL PROTECTED] wrote:
Tried to install director on my S900 running 10.2. It tells me that
an extension (I forget the name) needs to be installed. It is included
in the resources folder. When I try to drag it to the extensions
folder, I'm told the
on 2/21/04 8:03 PM, Gary Gorbet at [EMAIL PROTECTED] wrote:
Please explain why anyone would want to use both of these?
While CPU Director does work with our machines it seems to mostly be
for the G3 800 900 FX cpu upgrades which let you set the CPU and
bus settings on the fly with software.
on 2/20/04 1:48 PM, Alan Kim at [EMAIL PROTECTED] wrote:
Gregg Gorrie wrote:
1) Is there any advantage to using Classic mode rather than just
re-booting into OS9.2.2 off my other hard drive?
---
As an interested observer of all threads on X, it's my impression it's better
on 2/20/04 3:40 PM, Will S at [EMAIL PROTECTED] wrote:
Classic worked fine for me. In the early days of OSX I used it to run
my old copy of Netscape.There are a few apps and hardware that don't
run in Classic mode. Truth be told once your setup in OSx and things
are running well best to
on 2/20/04 5:40 PM, Gary Gorbet at [EMAIL PROTECTED] wrote:
Congratulations on your successful install.
Thanks ... luck was on my side this time ...;).
1) Is there any advantage to using Classic mode rather than just
re-booting into OS9.2.2 off my other hard drive? For now, the majority of
Well ... even up to a week ago I swore that I wouldn't go to OSX unless
upgrading to a new computer. However, two things changed my mind: an
incredibly bad streak of breakdowns (computer peripherals, vehicles, furnace
blower, you name it, etc.) have ensured the computer upgrade won't happen
until
on 2/15/04 8:20 PM, Greg Giannis at [EMAIL PROTECTED] wrote:
Hi Greg,
Dont know if this will help, but I had similar problems with my external FW
drive, and lost the contents many times. My problem is that I am using a
Orange Micro FW/USB card in my s900. This has been fine for USB, but FW
on 2/15/04 8:32 PM, David Nuzum at [EMAIL PROTECTED] wrote:
On Sunday, February 15, 2004, at 10:50 PM, Gregg Gorrie wrote:
Here's one that has me stumped.
Last week I took my OWC Mercury Elite firewire hard drive in to school
(where I work) to do a project on DVD Studio Pro (OSX
Here's one that has me stumped.
Last week I took my OWC Mercury Elite firewire hard drive in to school
(where I work) to do a project on DVD Studio Pro (OSX). When I brought the
drive back home and hooked it up to my S900, up popped some kind of message
about there being an error on the disk,
on 2/15/04 7:50 PM, Gregg Gorrie at [EMAIL PROTECTED] wrote:
Here's one that has me stumped.
Just to clarify my previous post, the S900 at home has Mac OS 9.2.2.
--
Gregg
--
SuperMacs is sponsored by http://lowendmac.com/ and...
Small Dog Electronicshttp://www.smalldog.com
on 2/8/04 1:40 PM, Will S at [EMAIL PROTECTED] wrote:
From: Gregg Gorrie [EMAIL PROTECTED]
Date: Mon, 02 Feb 2004 02:40:56 -0800
I've been having problems posting to list for the last few days ...
I've
sent replies to messages but don't see them end up on the list. I seem
on 1/19/04 5:15 PM, Drew Beckett at [EMAIL PROTECTED] wrote:
With nothing technical to back it up, I would venture to say the throughput
speed of Firewire 400 does not take advantage of the 7200 RPM IDE drives
that are typically used in Firewire drives.
That's not entirely true. I know of
on 1/15/04 1:43 PM, Stephen L. Phillips at [EMAIL PROTECTED] wrote:
List buddies:
My other computer is a G4/933 Quicksilver with a Pioneer DVR-104
(revision A277) Superdrive DVD burner (2X max burn speed).
Do any of you have experience or recommendations (read that: success!)
with
on 12/30/03 4:31 AM, Alan Kim at [EMAIL PROTECTED] wrote:
Excellent !
Your next 'test' is to burn a CD directly from data residing on the external
Firewire drive.
Mine is a holding tank before archiving onto CD.
Some of us may like to hear how it works on DVD burning.
Cheers,
Alan
To
on 1/16/04 9:32 AM, Alan Kim at [EMAIL PROTECTED] wrote:
Several years ago I was needing to choose CD-R brands for archiving film
scans.
The all-around best was, and still is if I am not mistaken, is the Mitsui
Gold.
Verbatim's DataLifePlus came in second with their proprietory Azo Blue
on 1/16/04 3:47 PM, Alan Kim at [EMAIL PROTECTED] wrote:
Gregg Gorrie wrote:
To answer your request, last night I did some data backup from my OWC
Firewire hard drive to the Firewire Pioneer A05 DVD burner (both of them
connected to an ADS Dual Link FW/USB card in Slot #2) at 4X speed
on 1/7/04 5:55 PM, Greg Giannis at [EMAIL PROTECTED] wrote:
Hello all,
Finally decided to rid myself of the dreaded OrangeMicro FW/USB card, and am
looking for an ADS Dual Link FW/USB PCI card. Would anyone on the list have
one of these, or be willing to buy one for me and ship to
on 1/7/04 12:40 AM, Cal Grant at [EMAIL PROTECTED] wrote:
Bruce,
Thank you for your help - I'll be buying a used drive off ebay shortly.
They're inexpensive. One further question - would either of the following
model numbers be recommended over the other: CR-507-C or CR-607-C?
Thanks
on 1/4/04 1:03 AM, Greg Giannis at [EMAIL PROTECTED] wrote:
Hello,
Have recently read some posts regarding FW cards, etc. I have been using a
ORangeLink FW/USB combination card, that has had some problems. The USB side
works flawlessly as I have never had any problems with it and have
on 1/5/04 8:27 PM, Paul F. Henegan at [EMAIL PROTECTED] wrote:
on 04.01.2004 04:03, Greg Giannis at [EMAIL PROTECTED] wrote:
Is it worth re-formatting the drive with HDST and applying the changes to
Max Payload Size and Max Data Transfer Size or is the ORangeLink FW/USB card
known to have
on 1/6/04 3:35 AM, Gregg Gorrie at [EMAIL PROTECTED] wrote:
Put the card in Slot #2 (Slot #1 has an ATI Xclaim VR128 card in it). I
Just a correction on my previous post - Slot #1 actually has a Miles UW SCSI
card in it. The ATI video card is in Slot #3. Here is the slot configuration
that's
on 12/29/03 12:33 PM, Alan Kim at [EMAIL PROTECTED] wrote:
Gregg -
In HDST, hightlight the Firewire drive and click on Driver Tuning Options.
There are two controls - Max Payload Size and Max Data Transfer Size.
Mine are set on 1024 Bytes and 512 Kilobytes, respectively.
Max settings are
on 12/28/03 2:42 PM, Alan Kim at [EMAIL PROTECTED] wrote:
Won't hurt to give this a try.
If you happened to format the drive with Hard Disk Speed Tools, use the
control
panel for firewire throughput
and drop it down one notch.
I'm not a hairsplitting speed demon with a stopwatch, but it
on 12/28/03 6:07 AM, FA at [EMAIL PROTECTED] wrote:
I seem to remember imovie 2. something that ran on OS 9.2 ?? Yet can not
find anything on Apple's web site making ref to imovie OS 9
computability ? Might someone have this set up running on S900 that I
may get some comments from ? And or
on 12/16/03 8:55 PM, Alan Kim at [EMAIL PROTECTED] wrote:
Thanks for your comments, David -
Having come across info on running bus powered devices and potential pitfalls,
I never considered driving such things as hard drives from the firewire port.
Operating a compact flash card reader,
on 12/17/03 6:16 AM, Alan Kim at [EMAIL PROTECTED] wrote:
Gregg Gorrie wrote:
Knock on wood ... I too am running all my computer equipment off of an APC
UPS and have had great confidence that it was protecting my gear, however a
recent incident took me by surprise.
snip
on 12/9/03 10:09 AM, Derf at [EMAIL PROTECTED] wrote:
Mark Jay Mirsky wrote at 12:43 -0500 on 12/09/03 about [SM] Teach Text?
Suddenly all my Simple Text files turned to Teach Text. How did
this happen and how do I change them back. I can't read them now without
first calling up Simple
on 9/21/03 2:45 PM, Derf at [EMAIL PROTECTED] wrote:
There are four or five extension that you need to remove. They are
used for classic mode for OS X and will cause the problems that you
are having.. Don't remember which ones they are but I'm sure that
someone else on the list can chime in
on 9/19/03 11:52 AM, Will S at [EMAIL PROTECTED] wrote:
9.1 then 9.2.1 and then 9.2.2 . I also am not so sure most people need
nor that they should upgrade to 9.2.2 which requires unsupported by
Apple hacks to work. There are issues on my J700 which I haven't
bothered to sort out as I no
on 8/27/03 5:15 AM, David Muller at [EMAIL PROTECTED] wrote:
OS 9.1 Could copy FW extensions from 9.2 if that will help. Can standard
OS and HDST extensions co-exist well, or do you need to choose and turn
off the others?
The OS 9.1 extensions should be fine. Did you install any
on 8/26/03 6:56 PM, [EMAIL PROTECTED] at [EMAIL PROTECTED] wrote:
I have an S900 system running OS 9.1.
I have noted some questions of late regarding the FW/USB pci cards. I
have had
a Orange Micro FW/USB card in slot F for some time, that has created
some problems:
A dual purpose FW/USB
on 8/20/03 7:58 PM, David Muller at [EMAIL PROTECTED] wrote:
I've got a couple scanners that specify a factory installed
firewire port as a requirement. I'm using Unibrain 3 port in
S900, and had some brief success, until the new Minolta
scanner seems to think some other software is
on 8/12/03 9:04 PM, David R. at [EMAIL PROTECTED] wrote:
Hi gang,
I'm having a new, never before experienced problem here. Not quite sure
what brought it on either. The only recent install I've made is Sonnett
Processor but I don't even have that running right now. When I try to open
up
on 7/26/03 5:48 AM, Alan Kim at [EMAIL PROTECTED] wrote:
Jim Black wrote:
People I know recommend Surgex. You patch them into the breaker box or
main leads, so obviously you need an electrician. Studios (music) use
them where power fluctuations are more an issue.
http://www.surgex.com/
on 7/24/03 8:58 AM, Robyn J. Lyons at [EMAIL PROTECTED] wrote:
quote who=Ernest L. Gunerius
On: Tue, 22 Jul 2003 23:30:45 -0500
jlmac [EMAIL PROTECTED]
Wrote
Mac users should consider getting a whole house surge suppressor.Most
of them use a gas discharge tube encased in epoxy or a heat
on 7/19/03 7:38 AM, Adrian O'Sullivan at [EMAIL PROTECTED] wrote:
I have two S900s and one J700 ethernet-linked. One running under Jag and
9.1; the other two under 9.1 only.
The question is: Can I view/control them using one single monitor?
Presumably I need some kind of switching device
on 7/18/03 1:04 AM, Nancy Haitz at [EMAIL PROTECTED] wrote:
Who let all these folks from the shallow end of the gene pool join the
SuperMac List?We are getting more blank posts, I am on vacation
notices, and SpamSlam posts than real messages.
I have not posted much lately, but I am
I've just installed Quicktime 6.02 (for the second time). Every time I
attempt to play an MPEG 4 movie, my computer locks up. Sometimes it happens
almost immediately, sometimes after 10-15 seconds, or when I try to stop
playback. It doesn't seem to exhibit this problem with movies using other
on 7/11/03 7:55 PM, Alan Kim at [EMAIL PROTECTED] wrote:
Phillip Meza wrote:
Yeah, an APC 250 something or other, I remember the client having the
unit
thinking it was a backup device for saving data, sold a bill of
goods, fried
her Rev. 2 iMac and she bought a eMac to replace it.
on 6/16/03 6:43 PM, Robyn J. Lyons at [EMAIL PROTECTED] wrote:
RAM still is fairly cheap (not quite as cheap as the new machines, but
eh), OWC www.macsales.com (check them out, great resourse for the
upgrade resistant person, plus they have XPF for loading OSX on these
machines) has them for
on 3/11/03 9:08 AM, Mark Jay Mirsky at [EMAIL PROTECTED] wrote:
Dear Ken,
Your explanation is lucid but I am still puzzled. I understand the
importance of the device having the correct voltage. What exactly then does
the power adapter mean on a Syjet when it reads output 5v-1.0A 12V 0.75A
on 2/14/03 4:47 AM, Alan Kim at [EMAIL PROTECTED] wrote:
Gregg -
Thanks so much for the lessons.
This information would be helpful no matter what machine is used for editing.
One more Q...I don't recall information covering this.
If my initial goal is to dump everything on DVD -
on 2/12/03 8:45 AM, Alan Kim at [EMAIL PROTECTED] wrote:
Phillip Meza wrote:
Thank's Alan, It looks as though I have found a solution, but I have a
question for you. does one need a lot of Hard Drive space to dump
video? I have a 20gig enclosure (firewire) ready to transfer is this
on 2/13/03 6:37 AM, Alan Kim at [EMAIL PROTECTED] wrote:
Gregg -
While we're on this, I'm guessing for editing, every time you work on a clip
the amount of data is actually doubled or tripled ?
Working on an hour's worth of video file could end up taking up much
more room
then the raw
on 2/10/03 6:21 PM, Paul Sullivan Rachel Kempel at [EMAIL PROTECTED]
wrote:
Hey Supermacers,
Does anyone know why one would get a Type 2 error message when trying to
cut and paste using Microsoft word 98? This started occurring recently.
Doing a bit of research, the only information I
on 2/7/03 4:21 AM, [EMAIL PROTECTED] at [EMAIL PROTECTED] wrote:
Hi Paul,
clean the contacts; no visible damage there. That didn't work, so I moved to
another free PCI slot. Voilà! That worked ...for the rest of that day.
Use a fibreglass pencil (watch where the fibres go, they're
on 1/20/03 8:45 AM, pdimage.fsnet.co.uk at [EMAIL PROTECTED] wrote:
The only bug is the tormented scsi ribbon due to the upside down bay
6 fittings - is there a way to get a disk in there right way up?
Has anyone created a bay cover for a zip from the blanks over 3 4?
Pete in the UK
I've
on 1/19/03 12:46 AM, Will Schou at [EMAIL PROTECTED] wrote:
It is true there is a DVD decoder add on to your ATI 128 video card.
But it only works in OS 9.x no support at all in OSX. There is also the
Wired 4 DVD that works with any video card but only in OS 9.x
Any ATI 128 video card or
on 1/9/03 2:27 PM, Jeff Walther at [EMAIL PROTECTED] wrote:
At 14:22 -0600 01/09/2003, Robyn J. Lyons wrote:
While it is okay in a native G3/G4 machine, you DO NOT want to turn
speculative access on if you are using a g3 upgrade in a 601/3/4
machine. I forget what the reason is exactly but
on 1/1/03 7:12 AM, Gary Gorbet at [EMAIL PROTECTED] wrote:
I understand why ATA/IDE may be the best solution for you, Adrian.
But there are reasons why a bootable FireWire is desirable.
In my case, I've ordered and am awaiting arrival of a FireWire card
and 80gig FireWire drive from OWC. My
on 11/26/02 7:31 PM, Kennedy Brandt at [EMAIL PROTECTED] wrote:
Greg wrote:
My S900 came out of the box with an ATI 3D card. I think it was one of the
last production models, as the person that sold it to me had stockpiled
several of the machines after the Umax license ran out.
You think
on 11/26/02 10:29 AM, Jeff Walther at [EMAIL PROTECTED] wrote:
Most of the S900s shipped with the TT cards, but some of them shipped
with other video cards. I'm not sure if the ATI card was one of
them.
Jeff Walther
My S900 came out of the box with an ATI 3D card. I think it was one of
After the recent posts regarding RAM/RAM testing, I decided to test my RAM
using TechTool Pro 3. Two evenings in a row I have run a full test
overnight, and both times I have awoken to find the machine locked up about
70-80% through the Minor March test. Only a hard boot will revive the
machine. I
1 - 100 of 103 matches
Mail list logo
