On 8/16/05, Howard Virag <[EMAIL PROTECTED]> wrote: > Hello, > > This is likely not strictly (or loosely) a pfSense problem. > > Can someone venture a guess as to why simple port forwarding is failing for > me? > > In short, It works to my Linux PC, an older AMD 800 MHz machine, but > port forwards to my Sun Sparc Ultra 2 fail regardless of port.
Interesting...hows routing on the U2 set up? Is the default gateway the same as the AMD? Hows the ARP table look - is it similar to the AMD box? I'm kind of assuming that the AMD and U2 are on the same network ;) > I am using pfSense, 0.74.4, behind an Actiontec GT704 set > up as a transparent bridge after having used a simpler DSL Paradyne > modem weeks ago successfully with IPCop. I recall that all worked > nicely before. PPPOE on the pfSense? I'm not completely following your network setup here. > Any suggestions on what to look at? > With previous posts in mind, I do have a mix of 3Com and a cheap new > Realtek card. Will using these cards make any difference for a small > home network? Performance issues mainly. The NICs work, just don't expect 100Mbit out of them (with exception to 3com which can just have "wierd" issues), --Bill --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]