Hello Gaurav, 1. when camera ON then it provide us blurred image. so how to overcome?? > What kind of lens do you have? One possible problem can be is that you are using CS mount lens with CS-to-C 5mm adapter ring - http://wiki.elphel.com/index.php?title=File:Cap_and_ring.jpeg
> 2. when camera ON then it is blinking continuously so what it means ?? is > it video recording or image capturing ?? > The blinking green led means the camera is connected to a network - network packets. Recording or capturing is is not indicated anyhow. Solid orange - power. 3. i want to capture a image (say for reference image) and then by > rotating camera some degree i want to capture another image (say current > image) after that i want to perform correlation between reference image and > current image. > http://wiki.elphel.com/index.php?title=Elphel_353_series_quick_start_guide#Getting_the_first_images Store the images and perform correlation if you have a program that does it. > 4. i want to reprogram fpga for finding correlation , so i should know > storage location of my current image and reference image so can you please > tell me where image is store in memory?? > That's a difficult question and I cannot answer it right away as I don't know. Could you please have a look at the verilog simulation of the compressor? Are you intending to run correlation over compressed images or raw data? > 5. when image is captured then are you applying any kind of image > processing operation and then image is stored in camera.?? > After the image is captured - the raw pixel data is converted and compressed into a chosen image format. No other processing is performed. http://wiki.elphel.com/index.php?title=JP4 http://wiki.elphel.com/index.php?title=Circbuf > 6. I successfully generate a x353.bit file but for rebooting camera i > unplug Ethernet cable and after 1 minute i plug it again, so it is rebooted > but there is no message popup for ensuring that it is rebooted and is it > right way to reboot camera?? > Did you meet the timing constraints? Rebooting: a. Not clear. You don't have to wait for 1 min - just unplug and plug the cable to the camera network port and wait until it boots for ~1min. But if you copied something on the camera it's better to run sync over the filesystem first, in a browser: http://192.168.0.9/phpshell.php?command=sync So, it's not rebooted if the power supply is on and left connected to the camera. b. if you have Linux, run terminal and type: > telnet 192.168.0.9 root/pass to login, then type: > sync reboot -f You can perform this from any telnet program. Best regards, Oleg Dzhimiev Electronics Engineer phone: +1 801 783 5555 x124 Elphel, Inc.
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
