Hi, Eric,
Thanks for your quick response. I spent yesterday night fiddling with this
issue and I found out what the problem was.
I compared the softwares installed at Elphel's live USB with the ones I
had, and notice the abscence of gecko-mediaplayer, that is used together
with gnome-mplayer in
Hi there, Oleg,
First, thanks for all your help. I have been able to open Elphel and
connect the CF Cards succesfully. At first, I thought the camera hadn't
recognized them because the first interface of the Disk recorder page
showed no devices found, but after messing about a little bit, I found
Hello, everyone,
This is my first post on this list, so congratulations for all the
achievements you've had so far with Elphel.
Yesterday, the Elphel 353 I'll be using for the next months has arrived and
I turned it on for the first time. I followed the Quick Start
On Thu, Apr 19, 2012 at 08:54, flavio soares qazav...@gmail.com wrote:
Hello, everyone,
This is my first post on this list, so congratulations for all the
achievements you've had so far with Elphel.
Yesterday, the Elphel 353 I'll be using for the next months has arrived and
I turned it on
Hi, Sebastian,
Thanks for changing th wiki. I believe that yes, we can improve that
documentation. I'll keep that in mind while I try to figure out the camera
what are my difficulties and how they are being solved, so we can add those
to the documentation for everyone.
As to why the live USB can
Hi there, an update to this issue:
I've re-ran nmap and it does seem to recognize Elphel's IP. It's the only
one identified (Hon Hai Precision). I can ping to all of the IPs
recognized, except for Elphel's, which just hangs without response.
This is the output of my nmap:
Hi, Oleg,
Thanks for the answer. I'll reboot and try the with the live USB.
My network is dhcp, all the computers plugged to a router via cables or
wireless. But I do have access to the router, in case it's needed.
I'll be back soon.
2012/4/19 Oleg support-list@support.elphel.com
Flavio,
Oleg, thank you very much! That was it! It works fine now!
This afternoon, I'll update this info at the wiki too, so that it can be
easily accessed.
Could I ask you one more question?
I am with the 353 model. I'm thinking about opening the camera to try some
Compact Flash cards I have here.
Flavio,
From the camera's homepage go to System Preferences - Network. And change
the ip address (to 192.168.1.9, for example) so it would be valid for in
current subnetwork (if the default mask 255.255.255.0) which is
192.168.1.xxx in your case.
How did you set up the wired interface address?
Oleg, thanks again for your kind response.
I'll watch the videos and read the guide. I'll let you know after I've
finished, but probably I'll have time to do it only during saturday.
best regards,
flavio
2012/4/19 Oleg support-list@support.elphel.com
Flavio,
From what I have, there was an
Flavio,
From what I have, there was an issue with DMA from the cards, but the
thread seems to be old. What precautions should I take in opening the
camera? Also, if the cards do not work, will the camera simply hang or is
there any chance of damaging it?
Check out videos from this page
11 matches
Mail list logo