Hi All
Well some said no and some yes , I'm here to say that it dose work
as 2 stroke oil and quite well at that , at first I was hasades to
use it in my chain saw
but after a while and having given it some thought, I used a 20 to
1 mix and it worked
Good start, but a few hours does not prove anything. Run it a few hundred
and if it is still going, tear apart and have it checked for wear.
Ed B.
www.biofuels.ca
- Original Message -
From: Martin R. [EMAIL PROTECTED]
To: biofuel@yahoogroups.com
Sent: Friday, August 31, 2001 11:53 PM
Well, you'd think that at 20:1, just about anything would work,
considering that most 2-strokes nowadays use 50:1 and even 100:1 mixes.
I'd be hesitant, however, to use it in my expensive Stihl chainsaw, but
if someone had an older 2-stroke lawnmower that they didn't care about,
it would be
Husey, where are you located? We have helped form a cooperative in Kentucky
and would be pleased to work with you as well.
Cornelius A. Van Milligen
Kentucky Enrichment Inc
[EMAIL PROTECTED]
What i want to ask is, is there anybody who is working with this kind
of organisations and inform
Hi Keith and All,
CRC is selling gallons of diesel fuel
garrentied to make a diesel pass emissions test where
they have them.
Could this just be Biodiesel?
Thanks,
jerry dycus
--- Keith Addison [EMAIL PROTECTED] wrote:
Who is CRC?
- Original Message -
From: jerry dycus [EMAIL PROTECTED]
To: biofuel@yahoogroups.com
Sent: Saturday, September 01, 2001 12:17 PM
Subject: [biofuel] Diesel emission passing fuel was, BD 2 stroke oil update
Hi Keith and All,
CRC is selling gallons of diesel
Hi ED and All,
CRC is a company that makes lubs and other
things. Mostly known for it's consumer spray can oils,
lubes and solvents but has many other products. I use
them a lot.
jerry dycus
--- Edward Beggs [EMAIL PROTECTED] wrote:
Who is CRC?
- Original
Mgrove ,
Are you from Pa.?
Kevin from Pa.
Yahoo! Groups Sponsor -~--
Get your FREE credit report with a FREE CreditCheck
Monitoring Service trial
http://us.click.yahoo.com/MDsVHB/bQ8CAA/ySSFAA/FGYolB/TM
Hi All
In all my 2 Stroke engines , I use 20:1 Mix , better to blow some smoke
then one at all . no smoke make's your saw run leaner and hotter and
run the risk sizing your saw greater more oil will make your 2 stroke engine
last longer for spark plugs are cheaper then an engine rebuild and the
If you run a 2 stroke on a richer ratio than the maker specifies, a well
known fact is that the burning of the excess oil creates heat, and can seize
your engine... I still hold to the fact that Biodiesel is NOT a substitute
for 2 stroke oil, try mixing it in an engine that uses the oil/fuel
RUBBISH you can NOT size an engine by over oiling the fuel .
By adding a 20:1 mix all you will do , if the engine is designed for 50:1
is the chance of ring bind . Which is the engine will not run properly nor will
it not rev out the way it was meant to . This is what WE in the mechanical
trade
11 matches
Mail list logo
