seems it would be easy to attach a pressure guage to the exhaust and find
out. Note that in a turbocharged engine, the intake prussure goes from
negative yo positive as the turbo spools up under load; i have read about
ethanol injection to cool intake temp and use ethanol / water mixes at all
I have added a cat to my vw diesel. it completely eliminated the smell of
biodiesel when it was fresh. it cost me $120 installed. After a year and
15,ooo miles, it has started smellimg again. I have used mostly biodiesel on
the theory that it smokes less and will therefore not clog up. I have
model airplane engines are retrofittable to run on diesel fuel. the kits are
available at certain model store. they may not be that cheap though.
anton
--
From: Jeremy Shuey [EMAIL PROTECTED]
To: biofuel@yahoogroups.com
Subject: [biofuel] Model Engines
Date: May 11, 2001, 9:05 PM
Does
hey, folks, this seems a little obviuos, but I have a batch of oil that is
cloudy, I'm not sure why, but i have assumed that it has some water
emulsified in it somehow. I have made two batches now, that have had varying
amounts of a thin waxy film on top, and a milky appearance after washing,
I have heard that a neighbor of mine puts used motor oil in his diesel fuel
in his semi trucks. It is illegal ( emissions ) and burns heavy metals,
smokes visibly , and that's at low concentrations ( 10% ) i call yucky on
that.
anton
--
From: Mindaugas Vaisvila [EMAIL PROTECTED]
To:
They sell heating furnaces that burn waste motor oil, which is as thick as
WVO. I believe that most oil burning appliances use a pump, an orifice and a
lighting device. I think it is simply a question of pressure and orifice
size that determines the fuel it is possible to burn with a certain
use, and
he pays to get rid of it.
anton
--
From: anton and federica [EMAIL PROTECTED]
To: biofuel@egroups.com
Subject: Re: [biofuel] diesel-fired boiler
Date: Jan 9, 2001, 8:59 PM
They sell heating furnaces that burn waste motor oil, which is as thick as
WVO. I believe that most oil burning
It is great to try things out and if they seem to be working , then they
probably are, but i am a little dubious about this system for several
reasons; gasoline cars are very sensitive to mixture, and the fuel injection
, or carburetor, mixes the fuel and air in an exact ratio to provide enough
This is a very good point, but surely it iwould not take much plumbing to
direct the mist tube to be above the plate or at least somewhere near
the throat of the throttle. Then the suction would be strong at high power
settings when the mist can have more effect. Anyone tried this?
the cat i am using now has about10,000 miles (16,000 kil.) on it, so I don't
feel too bad. what do you suppose that liquid was? oh, and by the way,
thanks for the info, i am incorporating the 2 stage settling, but am too
lazy to do the 2 stage reaction.
anton
--
From: [EMAIL PROTECTED]
thanks for the advice. Does anyone know whether the new VWs run cats, and if
so, how they keep them clean?
anton
Where did you install the converter? It needs high temperature to
function.An air injector may help,in the exhaust manifold.As close to the
exhaust ports as possible.A clogged
I know i should look in the website index, but i have never been able to
make it work...
What is everyone doing with their glyc erin? Is it O.K. to put it in the
drain after one has made sure that all the methanol is out of ti? Is there
some place that will take it as toxic waste, for not much
do you suppose these could be reused by drying in an oven?
anton
General Performance: One pound of Hydrosource will absorb up to 48
gallons of rainwater or snowmelt, and 20-35 gallons of water, depending on
the salt content of the water.
Hydrosource can be applied wet or
yes, that sounds great, i asked specifcally to know if it would be possible
to dry ethanol enough to make biodiesel with, or for that matter, save a
batch of methanol that hasd gotten wet. I also have been told by my pet
chemist that when you mix methanol and sodium hydroxide you get a small
Hey,
I got this back from the seller:
Dear Anton,
Thank you for writing to Gardener's Supply Company.
Hydrosource will return to crystal form when dried out. You can either
place it in a warm oven or allow it to dry on its own. If you have further
questions please let me know.
For more
leftover vegetable esters-love
renewable oil/alcohol diesel-load
diesel used for improving society-dufis
anton
Yahoo! Groups Sponsor -~-~
eGroups is now Yahoo! Groups
Click here for more details
can anyone tell me the pot life of mixed lye and methanol? assuming I keep
it dry, how long is the mixture stable? Iwould like to mix it up, and
trigger a valve to dump it into the oil vat when the oil reaches
temperature, thus eliminating a lot of hanging around watching oil heat
anton
, 2001, 11:50 PM
--- In [EMAIL PROTECTED], anton and federica [EMAIL PROTECTED] wrote:
can anyone tell me the pot life of mixed lye and methanol?
assuming I keep
it dry, how long is the mixture stable? Iwould like to mix it up,
and
trigger a valve to dump it into the oil vat when the oil reaches
I think that i the future we will have many different sustems to generate,
store, and use energy. I also think that the niftiest, most efficient car is
still going to be stuck in traffic most of its life. We as a people need to
figue re out a way to communicate, cooperate, and work together to
I have been making B-D for a year now, and I but meth. at $1.65/gal, lye at
$4 for 18 Ozs. So: 60 gals oil(free) 12 gals Meth.=$19.80+$8=$27.80 divided
into 60 gal product=46 cents.
anton
--
From: Keith Addison [EMAIL PROTECTED]
To: biofuel@yahoogroups.com
Subject: [biofuel] Re: Methanol
I am getting nice clean used oil from a company that fries up corn chips. if
you are in range of san frncisco, i will give you a barrel or two. I have
looked into it for someone else, and it ewill not be worth it to ship it any
distance.
anton
--
From: Greg Yohn [EMAIL PROTECTED]
To:
I want to enter my '82 vw rabbit; 40 MPG, renewable, recycled power source,
cost of vehicle: $75 vehicle performance: no worse than any other diesel
rabbit. Show those big dollar technogeeks what for.
Howevewr, the regisrtation fee is more than the car is worth, so I may not
bother.
anton
as a mechanic, I would have to say that the amperage draw is dictated by the
glow plug itself, not the computer or relay. The relay turns the plugs on
for a certain amount of time depending on the temp sensor. You have a
problem with the relay, which has the timer, or the temp sensor. larger
the engine thermostat shouldn't have any effect on the glow plugs because
they should only come on when the engine is cold. Once one plug starts to
go, all the other ones will go, because they are all about the same age, and
also it is possible, especially with 8 of them, the battery will give
oh, also, starting on less than the full # of plugs can be hard on the
engine, as it fires a few cylinders for a while until the others fire up,
too. In the 5.7l gm diesels it would break the cranks, although that is what
those engines deserved...
anton
--
From: anton and federica [EMAIL
model airplane engines are available that can be retrofitted with a kit to
run on dino and, presumeably biodiesel. I saw a website that alked about
using biodiesel, gaining efficiency and burning cleaner, but I don't know
where it is now. I know that most hobby hobby stores sell the engnes and
26 matches
Mail list logo