Do anyone know how many Kg there are in a liter of BioD?
Craig
Yahoo! Groups Sponsor -~--
Get A Free Psychic Reading! Your Online Answer To Life's Important Questions.
http://us.click.yahoo.com/Lj3uPC/Me7FAA/uetFAA/FGYolB/TM
Anyone have a source for general liability insurance for BioDiesel?
Craig
Yahoo! Groups Sponsor -~--
Get A Free Psychic Reading!
Your Online Answer To Life's Important Questions.
http://us.click.yahoo.com/aM1XQD/od7FAA/uetFAA/9bTolB/TM
Anyone have a resource for general liability insurance for BioDiesel?
Wisconsin preferred.
Craig
Yahoo! Groups Sponsor -~--
Get A Free Psychic Reading!
Your Online Answer To Life's Important Questions.
Kristen,
What is the cost? How do we order?
Craig
Have any of you tried the new glycerin analysis kit from
Sigma-Aldrich? I am the project leader for this new product
and would like to hear some feedback, good or bad.
We just got the results from our first attempt at the ASTM test. Everything
came in looking good except for a very low cetane number - 29. I have never
seen this low a number in a BioD test and do not know what we can do to
raise it. Any ideas out there?
Craig
Yahoo!
craig - I am sure sure of the answer to your question, but would you mind
telling me where you sent your fuel to be tested, what quantities you needed
to send in and how much it cost
Analytical Testing Services
Franklin, PA
2 liters
About $780
Craig
Yahoo! Groups
Try www.biodiesel.org
Craig
- Original Message -
From: Andrew Hoppin [EMAIL PROTECTED]
To: biofuels-biz@yahoogroups.com; [EMAIL PROTECTED]
Sent: Thursday, April 17, 2003 8:11 PM
Subject: RE: [biofuels-biz] Digest Number 540
Hi all. Does anyone know of a comprehensive list of names
Try this.
http://www.biodiesel.org/resources/reportsdatabase/reports/tra/tra-049.pdf
Thanks for your good work!
Craig
- Original Message -
From: girl mark [EMAIL PROTECTED]
To: biofuel@yahoogroups.com; biofuels-biz@yahoogroups.com
Sent: Friday, April 18, 2003 1:53 AM
Subject:
:
thanks Craig!
TNG
- Original Message -
From: Craig Pech [EMAIL PROTECTED]
To: biofuel@yahoogroups.com
Sent: Saturday, April 05, 2003 7:14 PM
Subject: Re: [biofuel] Small biodiesel processors
There is a company near St. Louis that makes such equipment
There is a company near St. Louis that makes such equipment.
www.biodieselgear.com .
Craig
- Original Message -
From: Tom Gehlen [EMAIL PROTECTED]
To: biofuel@yahoogroups.com
Sent: Saturday, April 05, 2003 1:37 PM
Subject: [biofuel] Small biodiesel processors
I'm looking for a small,
Try Mercedes diesels on ebay. You should be able to get a very nice one for
under $7000.
Craig
Anyone have any recommendations about buying a used diesel, so as to
implement biodiesel? My gasoline-powered car has been destroyed as it
sat parked at the side of the road by a woman who
Try www.autotrader.com . Use diesel as a keyword.
On Sat, 29 Mar 2003 14:58:04 -0500, you wrote:
If you are using the on-line version of the AutoTrader (we have one here
anyway), I
find it helpful to use diesel as a keyword in the search to go through
the
candidates quickly.
What link
Kelly,
We did some experimenting this winter. The two problems are the gelling of
the BioD and the air feed needs to be regulated at a different mixture. We
had success with a shut off valve for an ice maker feed - it screws into the
back of the unit. It will operate best when the valve is
for the tips Craig.
--- In biofuel@yahoogroups.com, Craig Pech [EMAIL PROTECTED] wrote:
Kelly,
We did some experimenting this winter. The two problems are the
gelling of
the BioD and the air feed needs to be regulated at a different
mixture. We
had success with a shut off valve for an ice
Patrick,
If you do not want that Mercedes, please let me know. I might know someone
who would be interested.
Craig
[EMAIL PROTECTED]
Green Bay, WI
I have an opportunity to buy an 1985 mercedes 300dt turbo diesel for
$2995 with 102,000 miles on it.
A friend from church has a 1981 mercedes
We are getting low ph readings (6.6 to 6.8) in our BioD. Anysuggestions on
how to get that back into the proper range?
Craig
Biofuel at Journey to Forever:
http://journeytoforever.org/biofuel.html
Biofuels list archives:
http://archive.nnytech.net/
Please do NOT send Unsubscribe messages to
Thanks Kieth,
As you probably know, our EPA can get rather nasty about dumping waste. We
will try to get a test done on this and will let you know the results.
Craig
- Original Message -
From: Keith Addison [EMAIL PROTECTED]
To: biofuel@yahoogroups.com
Sent: Monday, February 03, 2003
We are having some lab testing done this week and Im confused...
I thought earlier posts warned us against acrolein, not acrylamide. Are
these separate compounds? Do we need to test for both?
Craig
- Original Message -
From: Keith Addison [EMAIL PROTECTED]
To: biofuel@yahoogroups.com
We are up in Green Bay. Would be very interested in your Mercedes results.
Your biggest problem will be sourcing methanol - check with the speed shops.
Craig
- Original Message -
From: [EMAIL PROTECTED]
To: biofuel@yahoogroups.com
Sent: Thursday, January 23, 2003 9:34 PM
Subject:
Try the ASTM standards on www.biodiesel.org
Craig
- Original Message -
From: [EMAIL PROTECTED]
To: biofuel@yahoogroups.com
Sent: Thursday, January 23, 2003 10:29 PM
Subject: [biofuel] Biodiesel Properties???
Hello,
I am planning to use biodiesel to heat my home next winter because
Aaron,
Check with the Wisconsin DOT. You will have to do the same for the Minnesota
leg of your run.
We should be ready to produce (175 gpd) as soon as the weather cooperates.
Are you using the fuel for on-road?
Craig
Green Bay
- Original Message -
From: Aaron Ellringer [EMAIL
Robin,
The average person will consume 2 gallons of veg oil per year - 60,000
gallons in your town. Add a few surrounding towns and you should reach
100,000 gallons. The ease of getting supplies will vary by what your
competitor is charging to pick it up. In Wisconsin they are charging $55 per
Just did a comparison the other day. Used a Bacharach Monoxor - about a $780
unit for the test. Ford diesel truck with about 25 to 30% BioD was 157 ppm.
Ford Excursion (gas) parked next to it pegged at 2000 ppm (the unit does
not read over 2000 ppm). Both vehicles are fairly new - less than
-
From: Craig Pech [mailto:[EMAIL PROTECTED]
Sent: Thursday, January 09, 2003 10:51 AM
To: biofuel@yahoogroups.com
Subject: Re: [biofuel] fuel comparisons
Just did a comparison the other day. Used a Bacharach Monoxor - about a
$780
unit for the test. Ford diesel truck with about 25 to 30% BioD
Check out butanol first - I think it is very toxic.
Craig
- Original Message -
From: [EMAIL PROTECTED]
To: biofuels-biz@yahoogroups.com
Sent: Wednesday, January 01, 2003 8:16 PM
Subject: [biofuels-biz] Re: butanol process
how good a job does it do at the esterification of FFA's. How
You might start with your state department of transportation. Ours
(Wisconsin) tells you what needs to be done. Also, check with your
department of licensing.
Under EPACT, you may have some obligations to burn renewables in your truck.
Craig
Biofuels at Journey to Forever
Rick,
Where are you located and what is the price?
Craig
Green Bay, WI
- Original Message -
From: Rick Emery [EMAIL PROTECTED]
To: biofuel@yahoogroups.com
Sent: Thursday, December 26, 2002 3:29 PM
Subject: Re: [biofuel] Crude Soy Oil Source
Ken,.The soy oil is extruded/expelled
How much do you need? Where is it going to? Is soy oil OK?
Craig
- Original Message -
From: [EMAIL PROTECTED]
To: biofuel@yahoogroups.com
Sent: Thursday, December 19, 2002 11:12 AM
Subject: Re: [biofuel] Finding source for SVO
Hi to all,
I am looking for some-one in the states for
Jeff,
Looking at the waste stream in detail would be useful. Our sewage district
has been very leary about it and does not want us manufacturing BioD.
Craig
Green Bay, WI
- Original Message -
From: [EMAIL PROTECTED]
To: biofuel@yahoogroups.com
Sent: Saturday, December 07, 2002 8:08 AM
Lee,
I don't own one now - just noticed that they were very inexpensive and
thought it might be an option. If I went that route, I would want to run
BioD in it. I was looking for someone who was running one with BioD to see
if they had any problems.
Found a web site that sells parts for Mercs -
We are looking into a more high tech approach - above ground swimming
pools. They price out at $1300 for a 7500 gallon pool. We have subjected the
vinyl liner to BioD for a few days to see if it degrades - so far it has
stood up well, but we will continue the exposure test.
Should be good for
Antone had any experience with 1970's Mercedes and BioD?
Craig
Biofuel at Journey to Forever:
http://journeytoforever.org/biofuel.html
Biofuels list archives:
http://archive.nnytech.net/
Please do NOT send Unsubscribe messages to the list address.
To unsubscribe, send an email to:
[EMAIL
An interesting pump at www.redlinepumps.com . They are also available on
ebay at $189 plus $20 shipping. They also can have a filter mounted on them.
Craig
Biofuel at Journey to Forever:
http://journeytoforever.org/biofuel.html
Biofuels list archives:
http://archive.nnytech.net/
Please do
Questions:
1. Has anyone had to work with a sewage district for approval of wastewater
disposal from BioD? Do you have a contact our district could talk to?
Preferrably in the US.
2. Anyone had any experience with BioD in early 1970's Mercedes?
Craig
Biofuels at Journey to Forever
http://www.biobased.org/list2.php?storyid=2931
Interesting story on a new way to make BioD without a significant waste
stream.
Craig
Biofuel at Journey to Forever:
http://journeytoforever.org/biofuel.html
Biofuels list archives:
http://archive.nnytech.net/
Please do NOT send Unsubscribe
Source for ASTM certification for BioD:
www.wetestit.com
I think they are in Pennsylvania
Price is $760.00
Craig
Yahoo! Groups Sponsor -~--
Looking for a more powerful website? Try GeoCities for $8.95 per month.
Register your domain name
Help needed.
We were looking for a source for soy oil. Found one that gave an analysis
including 0.41% sulfur - 4100 ppm. That sounds very high especially if we
need to hit 15 ppm to meet ASTM standards. Does this number sound right? Is
it high due to fertilizer the farmers are using? Does the
Anyone know the cost of joining NBB? I contacted them last week, but they
have not gotten back.
Craig
- Original Message -
From: Steve Spence [EMAIL PROTECTED]
To: biofuels-biz@yahoogroups.com
Sent: Tuesday, October 08, 2002 9:26 PM
Subject: Re: [biofuels-biz] Legal Obstacles for
For those of you in the US that are interested in contacting the EPA - Joe
Sopata:
202-564-9034
[EMAIL PROTECTED]
Does anyone have a source for a lab that can certify ASTM standards - other
than NBB?
Craig
Yahoo! Groups Sponsor -~--
Sell a Home
After waiting forever for BioD to separate during washing, I tried a trick
that was identified for separating ethanol - Cooling / freezing it. The
freezing attempt failed. After moving the sample to the refrigerator (about
38 degrees F) - it appeared to work! I left it in overnight - about 8
BioD Washing
So it was clear after cooling at 38 F for
8 hr?
How cloudy was it before?
T
-Original Message-
From: Craig Pech [mailto:[EMAIL PROTECTED]
Sent: Thursday, September 19, 2002 11:06 AM
To: biofuel@yahoogroups.com
Subject: [biofuel] Re: Speedier BioD Washing
After
Can you tell us more about your EPA registration attemp? Who do we need to
talk to? Cost? What needs to be done? Why would they not let you have a
permit?
Craig
- Original Message -
From: [EMAIL PROTECTED]
To: biofuels-biz@yahoogroups.com
Sent: Tuesday, August 27, 2002 7:17 PM
Subject:
Mike,
A company out of Colorado has a patent on using cow manure to make ethanol.
A plant using the process is going in in a town called Emerald, Wisconsin.
More info in archives.
Craig
- Original Message -
From: Michael Meuser [EMAIL PROTECTED]
To: biofuel@yahoogroups.com
Sent:
Practical Use of Ethanol
1. It is unlikely that the ethanol has been watered down. It is absorbing
the water in storage and from your tank. It will take at least 3 to 4 full
tanks full to get the water out.
2. As the ethanol cleans your system, your car is likely to run very poorly.
The second
Murdoch,
When are you going to set up an investment fund for manufacturing biofuels?
Craig
- Original Message -
From: [EMAIL PROTECTED]
To: biofuel@yahoogroups.com
Sent: Wednesday, July 03, 2002 12:07 PM
Subject: Re: [biofuel] Mid-California Ethanol use
Thanks to several different
If you know someone with access to CBOT.com (Chicago Board of Trade), it is
posted there.
Craig
- Original Message -
From: Joe Trotter [EMAIL PROTECTED]
To: biofuel@yahoogroups.com
Sent: Wednesday, May 08, 2002 10:21 AM
Subject: Re: [biofuel] Price of Ethanol
concerning pricing, it
46 matches
Mail list logo
