I would like to know if anyone can direct me to a site where I can
find a poly tank and possible stand for washing biodiesel. Do not
have a lot of money to spend. Looking for 100 gal. or smaller. Any
other suggestions are always welcomed. Thanks. Jonathan.
Biofuel at Journey to
x-charset ISO-8859-1My question for members is concerning the motor for the
mixing tank.
I managed to find an older oil furnace motor and got it working
again. A friend of mine gave me a stainless spinner shaft for it and
it seems like it will work well. I have not tried it yet though.
x-charset ISO-8859-1I have another question concerning the heating of the
waste veg oil
before processing. If you heat the oil in a seperate tank, and then
pump into the processing tank, what temp is ideal for the reaction to
take place? Would I still need to heat the reaction vessel to
x-charset ISO-8859-1I have some questions regarding efficient heating of the
WVO prior to
processing. In regards to Mike Pelly's conical processor and the
electric hot water tank that Maria Alovert(Girl Mark) describes-what
would be the most efficient way of heating the oil, and still do it
x-charset ISO-8859-1This sounds like this could become a problem, not just in
CA. With
more and more people starting to make their own fuel, the waste
grease haulers may view this as losing their business. My opinion is
that there should be more than enough grease around that they needn't
x-charset ISO-8859-1My question is about registering with the Federal gov't
for legal
distillation for fuel alcohol. If the individual goes through all
the proper paper procedures and obtains the distillation permit, what
can one expect from the gov't after this? Are you only allowed to
x-charset ISO-8859-1Will 100% ethanol damage a gasoline engine, or does it
have to be
blended with gasoline?
Biofuel at Journey to Forever:
http://journeytoforever.org/biofuel.html
Biofuels list archives:
http://archive.nnytech.net/index.php?list=biofuel
Please do NOT send Unsubscribe
x-charset ISO-8859-1I figure the more I learn on the front end, the less
mistakes I will
make when I go to make my processor. I see from reading, that a
conical bottom makes the best kind of processor. However, I have
also seen flat bottom drums used for processing. If you don't have
x-charset ISO-8859-1I am a newcomer to the discussion board, so please bear
with me. Is
washing the biodiesel a necessary step? Reading Joshua Tickell's
book, he claims that he does not wash the biodiesel and has not had
any problems running it. Then when I looked at the Journey to
x-charset ISO-8859-1Thanks all for the great info on my previous questions.
I have to
say honestly that I was following Joshua Tickell's book very
closely...until I read some of the comments regarding his theories
and practices. What kind of filtering equipment is available and is
10 matches
Mail list logo