Re: [OSM-talk] Wide roads and traffic signals
Had a quick glance at your mapping work (impressive. Congrats!) Geha Road seems to be missing it's oneway-tags as well as the primary_link connecting it with Weizmann Avenue. And there are some untagged ways which look like they've been converted from GPS. Are these yours? Moshe Sayag: Hi everyone, I am trying to map my area (that is very sparsely mapped in OSM currently), so I bought a GPS device and started cycling / driving around and edit my tracks. The results so far can be seen at http://www.openstreetmap.org/?lat=32.1878lon=34.8714zoom=14layers=B00FT (Notice that the street names is not shown in Mapnik but only in Osmarender) ___ talk mailing list talk@openstreetmap.org http://lists.openstreetmap.org/cgi-bin/mailman/listinfo/talk
Re: [OSM-talk] Wide roads and traffic signals
If you can't cross from one side to another anywhere, then it should be marked as two separate ways. When you have a twoway road connect to one of these, it will connect to each side, with a little crossing piece in the middle. When you have two such roads connect, then it will look like a hash symbol (#) with four nodes. Each of these nodes would have a traffic light tag if there were lights. Stephen 2008/6/25 Moshe Sayag [EMAIL PROTECTED]: Hi everyone, I am trying to map my area (that is very sparsely mapped in OSM currently), so I bought a GPS device and started cycling / driving around and edit my tracks. The results so far can be seen at http://www.openstreetmap.org/?lat=32.1878lon=34.8714zoom=14layers=B00FT (Notice that the street names is not shown in Mapnik but only in Osmarender) My questions: 1. How do I map a wide road with a separation (line of trees) between the two directions? Something like: * * * * * * * * Do I set it as a one two-way road or two one-way roads? 2. If I set it as two separate ways, how do I mark traffic signals (traffic lights) where two such roads cross each other? ___ talk mailing list talk@openstreetmap.org http://lists.openstreetmap.org/cgi-bin/mailman/listinfo/talk ___ talk mailing list talk@openstreetmap.org http://lists.openstreetmap.org/cgi-bin/mailman/listinfo/talk
Re: [OSM-talk] Wide roads and traffic signals
Moshe Sayag wrote: 1. How do I map a wide road with a separation (line of trees) between the two directions? Something like: I think the OSM way is to map it as 2 separate one-way ways. The rule of thumb is if it's physically impossible to change sides (ie something in the way down the middle), then it should be 2 ways. If it's nothing more than a painted line down the middle, then map it as a single way. Rory ___ talk mailing list talk@openstreetmap.org http://lists.openstreetmap.org/cgi-bin/mailman/listinfo/talk