address in the group. I have
j defined a New Message and a Forward templates for the group
j name. The New Message Template works but the Forward template doe
j NOT work. I am forwarding using the group name - all entries.
Is there a forwarding template defined for the members of the group
the account/folder forwarding
j template, then it will not use ANY forwarding template that I have
j defined even the individual AB ones.
In that case I think that you've got multiple entries in the address
book with the same address. Otherwise TB gives preference to the
templates in this order
Hi Roelof,
Saturday, May 04, 2002, 4:34:57 PM, you wrote:
In that case I think that you've got multiple entries in the address
book with the same address. Otherwise TB gives preference to the
templates in this order: personal, address book group, folder,
account.
When you've got two
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Eddie,
@01 May 2002, 07:22:33 +0200 (06:22 UK time) Eddie Castelli wrote in
[EMAIL PROTECTED]">mid:[EMAIL PROTECTED]
BTW - another mistake in such templates is to use the construct
%TO=[EMAIL PROTECTED] without a %TO='' before it
25 April 2002, 20:03, you wrote:
MDP Actually, the coverage of Templates in the Help is pretty good, even
MDP if I say so myself. There's a good basic explanation under Templates
MDP General Concept and a lot of detail in the various break downs with
MDP examples and links to the macro sections
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Clive,
@26 April 2002, 07:52:09 +0100 Clive Taylor wrote in
[EMAIL PROTECTED]">mid:[EMAIL PROTECTED]
... To use a small example that's been aired here recently -
SmartBat.
... a new feature that hasn't yet been covered, admittedly, although
Hello Joseph!
On Thursday 25-04-02 (17:27) you wrote to me:
JN If you want a message that will always go to a particular
JN person or group of people, then put them in your address
JN book.
--
This suggestion was exactly what i looked for! I hadn't got any
further than storing
Hello Dierk!
On Thursday 25-04-02 (17:50) you wrote to me:
DH AB Templates are very good if you create them for every
DH group or contact you have. You can thus create individual
DH messages for every single person (even address) you have
DH listed in your AB. Combined with the last category
Hello udlers,
I'm new in TB! 1.60c and quite impressed by the detailed
discussions you have in TBUDL. Could anyone explain this novice
how to make a series of *different* new messages (one to
friends, another one to business relations, et cetera) and how
to store them somewhere?
Groeten,
Fré.
There are three ways to do what you have asked; it is not clear to me
which is really what you have in mind.
If you want one generic message for all email within a particular
category, e.g., business, then go into Options/Quick Templates, and
create or paste the content. Give it a name you'll
cetera) and how
to store them somewhere?
There are different ways to achieve this.
1. Account templates (see under Account/Properties/Templates)
2. Folder Templates (Folder/Properties/Templates)
3. Address Book Templates (Properties for any contact or group you
entered)
4. Quick Templates (Ctrl
25 April 2002, 16:27, you wrote:
JN There are three ways to do what you have asked; it is not clear to me
JN which is really what you have in mind.
Joseph
That was one of the clearest responses I've seen for a long time. You
wouldn't like to write the rest of TB's help file, would you? :)
--
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Dear Clive
On 25 April 2002 at 17:54:53 +0100 (which was 17:54 where I live) Clive
Taylor might have written
CT That was one of the clearest responses I've seen for a long time. You
CT wouldn't like to write the rest of TB's help file, would you?
you?
CT :)
and put Marck out of a job :)
Actually, the coverage of Templates in the Help is pretty good, even
if I say so myself. There's a good basic explanation under Templates
General Concept and a lot of detail in the various break downs with
examples and links to the macro sections. Then
Hi all,
I am using an AB template with the macro %TOFNAME, however when a new
e-mail is created TB doesn't use the first name field in the AB, it
uses the first word in the display name as field. Surely this is not
the correct behaviour?
I change many display name fileds to sort within groups
ON Tuesday, April 16, 2002, 8:42:20 AM, you wrote:
PG Hi all,
PG I am using an AB template with the macro %TOFNAME, however when a new
PG e-mail is created TB doesn't use the first name field in the AB, it
PG uses the first word in the display name as field. Surely this is not
PG the correct
Hi Gerard,
Hi Pat,
You want to use %AbToFirstName if you want the send TO the FirstName from the
Address Book (AB). Better yet use the one below:
%AbToFirstName=:%ToFName:%AbToFirstName
Many thanks for the info, I quickly worked out how to add the %IF
statement. However I have noticed
Good evening Pat,
It was foretold that on 16-4-2002 @ 10:42:20 GMT+0400 (which was
8:42:20 where I live) Pat Gilbert wrote and spread these wise comments
on Address Book Templates:
snipped a bit
PG I am using an AB template with the macro %TOFNAME, however when a new
PG e-mail is created
My system currently displays Eastern Daylight Savings Time (UTC-4). My
system is set up to change automatically from EDST to Eastern Standard
Time (UTC-5) on the appropriate Sunday in the fall. This is useful for
most practical purposes, but...
When a message sent at midnight UTC from anywhere
Hello Daniel,
On Wed, 10 Apr 2002 11:07:11 -0400GMT (10-4-02, 17:07 +0200GMT, where
I live), you wrote:
DG Is it possible to amend my acccount's Reply Template so that the text
DG of my reply will show:
DG 1. The original message time in _the_time_zone_of_the_sender_
DG 2. The difference
message's time zone to: [GMT+0200]
3. Change my date to: 10APR
4. Automatic change of my time, twice a year.
It seems to me that the templates are like short programs executed
under theBat! Is there a place where I can find a primer on the
grammar of the language in which the templates are written
. And then you have to ctrl+alt+del when tired of waiting.
This only happens with templates I've made, either on the folder or
address book level. Account level is ok.
Also, it only happens with templates, that look like this:
%CLEAR%-
%LANGUAGE=BR%-
%QINCLUDE=HiIr
%QINCLUDE=YoursHans
%QINCLUDE
Hello Allie,
On Tuesday, April 9, 2002 at 19:53:06 -0500, Allie C Martin [ACM]
wrote concerning 'again: folder level templates':
...
In you use a mailto: URL that's in a message to create a new
message, the address defined by the %To macro will also be added to
the message To: address field
Hello Miguel,
On Tuesday, April 9, 2002 at 01:45:56 +0200, Miguel A. Urech [MAU]
wrote concerning 'again: folder level templates':
...
Thanks to Miguel A. Urech...
You know the price, you owe me a beer now ;-)
I know ;-)
There is no problem using folder templates. I use AB templates
transparent. And then you have to ctrl+alt+del when tired of waiting.
I've the same problem when replying to a message. When I'm not
replying via the reply-button, but via CtrEnter everything is ok.
HHS address book level. Account level is ok.
HHS Also, it only happens with templates, that look like
is to use folder level templates
DvZ because it can't be done with an AB template.
Best way might be an address book reply template.
Mailtraq has an extensive scripting language and it's a piece of cake
to let it insert reply-to headers in every gated usenet message with
the reply-to address set as your
, I can use an AB template for that. But
with replies I think the easiest is to use folder level templates
because it can't be done with an AB template.
I know the warnings about folder level templates and normally I
always use AB templates, but I was wondering what is dangerous about
Hello David,
Thanks to Miguel A. Urech...
You know the price, you owe me a beer now ;-)
There is no problem using folder templates. I use AB templates but
also folder templates for some folders and specially for newsgroups.
These are, for example, my templates for one of the Microsoft
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
@ 01:19:22 +0200 [ Tue, 09 Apr 2002], David Van Zuijlekom [DVZ]
thoughtfully wrote the following:
...
DVZ I know the warnings about folder level templates and normally I
DVZ always use AB templates, but I was wondering what is dangerous
DVZ about
Hello The,
Is it possible to have a different Reply template depending on which
website one of my enquiries came in on?
For example, I might get a reply from:
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
The first two require a different Reply template to the last
folder reply templates.
--
Groetjes, Roelof
Current Ver: 1.60c
FAQ: http://faq.thebat.dutaint.com
Unsubscribe: mailto:[EMAIL PROTECTED]
Archives : http://tbudl.thebat.dutaint.com
Moderators : mailto:[EMAIL PROTECTED]
TBTech List
Hello Dave,
On Wednesday, March 27, 2002 at 17:39:28 -0500, Dave Goodman [DG]
wrote concerning 'Clarification requested on list reply headers':
...
I've seen Marck's warnings about using folder templates, along with
comments from several others. What I have not seen is an explanation
why
say ;-))
I've seen Marck's warnings about using folder templates, along with
comments from several others. What I have not seen is an
explanation why this is a Bad Idea.
Cheers
Ray
Current Ver: 1.60 / 1.60a
FAQ: http
Thursday, March 28, 2002, 12:15:54 PM, David van Zuijlekom wrote:
This is a quote from Marck a few months ago (a very good explanation
why folder templates are dangerous):
---
I'm guilty of this. However, I have fifty-odd folders, most of which
I've set with custom properties and templates
Hello David,
On Thursday, March 28, 2002, at 04:15:54 AM -0700, you wrote
the following in regards to Why folder templates are dangerous (was Re: Clarification
requested on list reply headers):
I've seen Marck's warnings about using folder templates, along with
comments from several others
Hello William,
On Thursday, March 28, 2002, at 12:26:53 PM -0700, you wrote
the following in regards to Why folder templates are dangerous (was Re: Clarification
requested on list reply headers):
NA she
She?
Absolutely! Something as refined yet temperamental as The Bat must be
given
Hello Nick
Thank you for your email dated Thursday, March 28, 2002, 8:14:45 PM, in which you
wrote:
NA she
She?
--
Regards
William
PGP spoken here - email me for my Public Key
mailto:[EMAIL PROTECTED]
Flying with The Bat! 1.60
andwidth, okay?).
Except in one aspect.
Many TB fans warn others about the use of folder templates.
Now, I made the opposite error: I have quite a few address
book entries ( 500) plus I rely on the history, knowing
that either the handle or somebody or some list that I
addressed recently is bound
On Thursday, February 28, 2002, 15:05, you wrote:
Now is there a simple way where in I can copy all the templates,
their handle name to the lap top. i.e. NOT copying the
individual templates to a file and then recreate them at the other
end.
Try the Backup functionality under
Fellow TB users,
On my desktop I have, over the years, developed quite a few templates. I now
plan to use a lap top and TB is the obvious choice of e-mail client.
Now is there a simple way where in I can copy all the templates, their handle
name to the lap top. i.e. NOT copying
Jap.. thats it ;) I love Cookies..hehe.
Thanks a lot, *bow
---
Best regards,
Stefan mailto:[EMAIL PROTECTED]
The answer is 42. (Adams 1980)
--- Original ---
From: Dierk Haasis
To: Stefan Kosmal
Sent: Montag, 21. Januar 2002
Subject: Templates
Hello Stefan
on TBUDL
Sent: Sonntag, 20. Januar 2002
Subject: Templates
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Stefan,
On 20 January 2002 at 17:20:03 +0100 (which was 16:20 where I live)
Stefan Kosmal wrote to The Bat and made these points:
Is it possible to change them for each outgoing mail
Hello Stefan,
On Monday, January 21, 2002 at 5:54:26 PM you wrote (at least in part):
SK Hoi
SK Not exactly.. i want to change the sig...and there
SK just the The answer is 42. (Adams 1980) to
SK another wise slogan ;)
Maybe you want to use the '%COOKIE' macro which automatically choose
one
Hello Stefan!
On Monday, January 21, 2002 at 5:54:26 PM you wrote:
Not exactly.. i want to change the sig...and there
just the The answer is 42. (Adams 1980) to
another wise slogan ;)
Randomly? Then the answer was - I think - already given: Use a text
file, enter every tag line you want in
Moinsen
Is it possible to change them for each outgoing
mail automaticly?
Thx
--
Best regards,
Stefan mailto:[EMAIL PROTECTED]
The answer is 42. (Adams 1980)
--
Archives : http://tbudl.thebat.dutaint.com
writing?
Random signature line?
Several different templates for different recipients?
Automatic controlling of coffee machine, freezer or television,
depending on when you write the mail?
If you could give us some more details we'll surely be able to find a
solution, or at least some work arounds
templates for each
destination. Is that what you're asking?
- --
Cheers -- .\\arck D. Pearlstone -- List moderator
___
\ BrainStorm - free thinking - www: http://www.brainstormsw.com /
\ PGP Key ID: 0x929DCDA0| www: http
Bonjour Jan,
Samedi, le 12 janvier 2002 à 08h54 [GMT -0500] (ce qui correspond à
14h54 ici où j'habite), Jan Rifkinson =[JR] a écrit à Luc :
JR Ultimately, IMO, all templates should be made up of
JR $INCLUDEs.
But if Account.qtn could be in Human Readable Format (for remake up
Hello Luc.
At 7:35 PM on Friday, January 11, 2002 you wrote the
following about [Templates]
Luc [...] I was wondering if those templates could be
Luc created as QT, so if i have to change something in
Luc a template, i can do it in the QT and there fore
Luc the changes are applied immediately
Hi list,
tnx for the replies. Works great.
--
Best regards,
Luc mailto:[EMAIL PROTECTED]
Using The Bat! v1.53d on Windows NT
5.0 Build 2195
Thought for the day : A Flatterer is a man that tells you your
opinion and not his own.
--
It was foretold that on 12-1-2002 @ 12:55:24 GMT-0500 (which was 18:55
where I live) Jan Rifkinson wrote and spread these wise comments on
Templates:
JR Ah, well, I stand corrected. I guess I should
JR have said New/Reply/Forward etc msg templates, right?
JR Oh well, I hope Luc
Hi list,
I have set up a few templates i use for a lot of my contacts.
I was wondering if those templates could be created as QT, so if i
have to change something in a template, i can do it in the QT and
there fore the changes are applied immediately to the contacts kin my
AB
Luc,
On Sat, 12 Jan 2002, at 01:35:26 [GMT +0100] (which was 6:05 AM where I live) you
wrote:
L I have set up a few templates i use for a lot of my contacts.
L I was wondering if those templates could be created as QT, so if i
L have to change something in a template, i can do it in the QT
with Templates.
[...] Before doing that you should ask Ritlabs about.
I will just to be on the secure side ;-))
--
/\/\
|| George M. Menegakis - System Administrator ||
|| Centre of Communications and Networking||
|| Iraklion Campus - University
Hello Eddie,
On Fri, 21 Dec 2001 08:53:09 +0100GMT (21-12-2001, 8:53 +0100GMT,
where I live), you wrote:
EC Some days ago I had to move my TB!datas to a other drive due to lack
EC of memory. Now I found that on all Accounts I lost my templates except
EC on some particular folders. As I have
21 Dec 2001, 09:53:09, Eddie Castelli wrote:
Dear readers from 'TB!udl List',
Some days ago I had to move my TB!datas to a other drive due to lack
of memory. Now I found that on all Accounts I lost my templates except
on some particular folders. As I have generally kept my folder
structure
Dear Roelof,
--- Roelof Otten / Freitag, 21.12.01, 13:35:58
(2nd try) Only /some/ Templates are lost !!
As far as I can see, the folder templates are stored in a file named
account.flx But in that same file your complete folder setup is being
kept.
[...]
Are you sure you've kept
Yasu George,
--- George M. Menegakis / Freitag, 21.12.2001, 14:34:31
(2nd try) Only /some/ Templates are lost !!
When I moved The Bat folders from C:\Data\The Bat to D:\Data\The Bat
I used ultraedit in order to global replace C:\Data\The Bat with
D:\Data\The Bat recursively in all
@ 08:53:09 +0100 [ Fri, 21 Dec 2001], Eddie Castelli [EC] wrote these
words of wisdom:
...
EC Some days ago I had to move my TB!datas to a other drive due to
EC lack of memory. Now I found that on all Accounts I lost my
EC templates except on some particular folders. As I have generally
EC kept
Hello Eddie,
On Fri, 21 Dec 2001 16:41:43 +0100GMT (21-12-01, 16:41 +0100GMT, where
I live), you wrote:
EC I likte to add that I've changed in the same time from v1.53t to
EC v1.54b10. Do you think this could have to do with it??
Dunno. Stil haven't gone any further than 1.53d.
--
Groetjes,
@ 16:41:43 +0100 [ Fri, 21 Dec 2001], Eddie Castelli [EC] contributed
this to our collective wisdom:
...
EC I likte to add that I've changed in the same time from v1.53t to
EC v1.54b10. Do you think this could have to do with it??
I doubt this. It's very likely how you went about making the
Dear readers from 'TB!udl List',
Some days ago I had to move my TB!datas to a other drive due to lack
of memory. Now I found that on all Accounts I lost my templates except
on some particular folders. As I have generally kept my folder
structure as is I wonder why or how this could happen
Dear readers from 'TB!udl List',
Some days ago I had to move my TB!datas to a other drive due to lack
of memory. Now I found that on all Accounts I lost my templates except
on some particular folders. As I have generally kept my folder
structure as is I wonder why or how this could happen
templates. What should I check out?
--
Best regards,
Ottar Grimstad, Norway
mailto:[EMAIL PROTECTED]
http://home.online.no/~ottgrims
Using The Bat! 1.53d on Windows 98 version 4,10
--
Archives : http://tbudl.thebat.dutaint.com
Moderators
Hello Ottar,
On Sunday, December 16, 2001, at 12:14:45 AM -0700, Ottar Grimstad wrote
the following in regards to Reply templates:
I have created a Reply template for TBUDL and placed it in an
address book entry for the list. But this does not work. The system
uses the general template
Hei Nick,
16. desember 2001 skreiv du:
NA Under the Properties/New Message and Properties/Reply make sure
NA that you've entered your Template properly and that you've checked
NA the box entitled Use a Specific Template for Do you find
NA it's just this one AB Template that isn't working,
Hi Ottar,
OG I have created a Reply template for TBUDL and placed it in an
OG address book entry for the list. But this does not work. [...]
OG What should I check out?
you should check whether there is more than one address book entry for
this list (F8, F7, Search for mail address). Maybe TB!
have to put the
OG template in the folder to make it work, and I am not very fond of
OG folder templates. What should I check out?
I had this once, and it turned out there a typing mistake in the email
address in the AB.
--
Cheers,
Thomas.
Moderator der deutschen The Bat! Beginner Liste
Hello Thomas,
Sunday, December 16, 2001, 12:05:37 PM, you wrote to TBUDL:
TF I had this once, and it turned out there a typing mistake in the
TF email address in the AB.
Yes there was.
--
Best regards,
Ottar Grimstad, Norway
mailto:[EMAIL PROTECTED]
http://home.online.no/~ottgrims
Using
Hello Carsten,
Sunday, December 16, 2001, 11:38:27 AM, you wrote to TBUDL:
CT you should check whether there is more than one address book entry
CT for this list (F8, F7, Search for mail address). Maybe TB! checks
CT for a template in the wrong AB entry...
Yes there was more than one entry.
Dear Ottar,
--- Ottar Grimstad / Sonntag, 16.12.2001, 12:38:18
Reply templates
Yes there was more than one entry. It seem that ailter I have made
to automatically add the persons I send mail to to my address book
also adds entrys like
Carsten Thönges [EMAIL PROTECTED
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello Bob!
On 5 Dec 2001 at 23:49:00 you wrote:
I thought putting QINCLUDE=Handle in the body of the message would
work but all it get is QINCLUDE=Handle actaully written in the
message rather than the text from the Template.
Like you have
Is there a way during composing a message to enter a command in the
actaull body of the message to Insert a Template?
I thought putting QINCLUDE=Handle in the body of the message would
work but all it get is QINCLUDE=Handle actaully written in the
message rather than the text from the
Hi Bob,
On 5 Dec 2001 at 15:49:00 [GMT -0700], you wrote:
B Is there a way during composing a message to enter a command in the
B actaull body of the message to Insert a Template?
Type the name of the quick template and press CTRL-Space right after
the name (no space after the name of the QT).
Hi Bob,
B Is there a way during composing a message to enter a command in the
B actaull body of the message to Insert a Template?
Type QT handle in the mail body and press Ctrl+Space :-)
--
Best regards, Carsten
The Bat! (v1.54 Beta/15) Business
Windows NT 5.0 (Build 2195) Service Pack 2
I have tried to make this work in a template, but I must be doing something wrong...
%IF:%TONAME=%TOADDR::Dear %TOFNAME,
when it sends out the email here is what I get.
:bob=[EMAIL PROTECTED]::Dear bob,
I have followed the instructions exactly as they were given at
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Bob,
On 05 December 2001 at 18:53:22 [GMT-0700] (which was 01:53 where I
live) Bob wrote to Bat and made these points:
B I have tried to make this work in a template, but I must be doing
B something wrong...
B %IF:%TONAME=%TOADDR::Dear
Hello Marck,
Tuesday, December 04, 2001, 7:17:46 PM, you wrote:
MDP -BEGIN PGP SIGNED MESSAGE-
MDP Hash: SHA1
MDP Hi Bob,
MDP On 05 December 2001 at 18:53:22 [GMT-0700] (which was 01:53 where I
MDP live) Bob wrote to Bat and made these points:
B I have tried to make this work in a
Bob,
On Tue, 4 Dec 2001, at 18:53:22 [GMT -0700] (which was 7:23 AM where I live) you
wrote:
B I have followed the instructions exactly as they were given at
B http://www.silverstones.com/thebat/manage.html?#64E
Instead of that try this for salutation for massmailing.
Dear %ABtoFIRSTNAME
for
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Bob,
On 05 December 2001 at 19:33:08 [GMT-0700] (which was 02:33 where I
live) Bob wrote to Marck D Pearlstone and made these points:
B I Upgraded and it now works..thanks for the help--Now Where can
B i find out information on these new
Bat List,
Is there a quick way to copy all the default templates I set up for
one account so that they can be used for another account? I have four
email accounts set up and I'm playing around with the default
templates and for many of them I want them to be the same for each
account. Rather
Hello Rick,
It was foretold that on Saturday, November 17, 2001 at 13:51 GMT
-0500, Rick Reumann [RR] would type:
RR Is there a quick way to copy all the default templates I set up for
RR one account so that they can be used for another account? I have four
RR email accounts set up and I'm
Januk,
Saturday, November 17, 2001, 2:04:35 PM, you wrote:
Januk Hello Rick,
Januk It was foretold that on Saturday, November 17, 2001 at 13:51 GMT
Januk -0500, Rick Reumann [RR] would type:
RR Is there a quick way to copy all the default templates I set up for
RR one account so that they can
Carren,
On Wed, 14 Nov 2001, at 22:15:28 [GMT +1300] (which was 14:45 where I live) you
wrote:
C It no longer appears in the address book
C templates tabs but obviously *does* exist somewhere or otherwise TB!
C would not be able to keep resurrecting it!
Have you checked the folder-properties
the templates.
Check out Marck's FAQ pages on what can be done with templates
http://www.silverstones.com/thebat/samples.html
--
Warm regards,
Raj
mailto:[EMAIL PROTECTED]
The more you complain, the longer God makes you live.
Replied on Thursday, November 15
level template will come back to haunt you at
some point. There are two solutions, the first one is many times
better than the second one. You can read the arguments in the FAQ at
http://faq.thebat.dutaint.com. Look at the Message Templates
section. To summarize, the solutions are:
1. Create
On Friday, November 02, 2001, Januk Aggarwal wrote something about
Folder level templates (was: Re: replycount), to which I'd like to add the
following...
HT Of course... I could modify the 'New' template for the folder I
HT filter the TB list into to automatically insert the list mail
HT
Hello Han,
An archeological dig discovered that on Friday, November 2, 2001 at
11:46 GMT +0700, Han Thomas [HT] typed the following:
HT On Friday, November 02, 2001, Januk Aggarwal wrote something about
HT Folder level templates (was: Re: replycount), to which I'd like to add the
following
Hi,
I would like to know how to I remove all templetes from the bat?
When I write a new e-mail reply or whatever just want the window to be
blank that have hello and whatever on it..
Also the when selecting text in the write message window it won't
delete only way I can is to cut it...
Anyhelp
Hallo Scott,
SS I would like to know how to I remove all templetes from the bat?
Whether it's possible to delete all templates I don't know, but you
could make them blank.
SS When I write a new e-mail reply or whatever just want the window to be
SS blank that have hello and whatever
Scott,
On Wed, 31 Oct 2001, at 22:02:38 [GMT +1030] (which was 17:02 where I live) you
wrote:
SS hen I write a new e-mail reply or whatever just want the window to be
SS blank that have hello and whatever on it..
I am not sure if you can delete some files in the relevant dir... but a temp
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Raj,
On 31 October 2001 at 17:32:57 [GMT+0530] (which was 12:02 where I
live) Raj wrote to Scott Sims on tbudl and made these points:
SS hen I write a new e-mail reply or whatever just want the window to be
SS blank that have hello and whatever
Marck,
On Wed, 31 Oct 2001, at 12:12:55 [GMT +] (which was 17:42 where I live) you
wrote:
MDP You can - use the %BLANK macro to specify that a template is
MDP intentionally blank.
I guess Scott's question was how to remove all templates. I wonder where the template
info
is stored
. If it is, only the
MIME-forwarding will produce any reasonable results.
As others have said, your best bet is to alter the templates in the
Account Properties. If you really do want them blank, use the %BLANK
macro.
SS When I write a new e-mail reply or whatever just want the window to be
SS
Hello Raj,
At 9:29 AM on Wednesday, October 31, 2001 you wrote the
following on the posted subject 'How To I Remove all
Templates?':
Raj However %Blank does not work when one uses Ctrl+Space.
Raj i.e. once you already have some
Raj text generated by the default template.
TB! first looks
Templates. I suspect this
regexp is complicated enough that *any* further discussion should be
on TBTECH.
--
Thanks for writing,
Januk Aggarwal
Using The Bat! 1.54 Beta/8 under Windows 98 4.10 Build A
I'm really easy to get along with once you people learn to worship me
Hi Kevin,
On Tue, 25 Sep 2001 19:45:35 -0400GMT (26/09/2001, 07:45 +0800GMT),
Kevin Coates wrote:
KC I guess here is where I'm confused. If I do not include
KC %TO=[EMAIL PROTECTED] in the Folder Template for *new*
KC messages, The Bat prompts me for an address.
That is the whole idea.
%SUBPATT=1%SUBPATT=4'''
JA Just replace my addresses with your address(es) in the form:
JA ([EMAIL PROTECTED]|[EMAIL PROTECTED]|[EMAIL PROTECTED]|...)
Works like a charm like all RegEx developed by you. Thanks.
JA You can simplify this somewhat using Quick Templates. I suspect this
JA regexp
Hello Januk!
On Tuesday, September 25, 2001 at 17:35:30 -0700 GMT (8:35 PM my local
time) you wrote about AB Templates:
JA %IF:%TOLIST%CCLIST%BCCLIST=:%TO='[EMAIL PROTECTED]'
JA This only adds the list address if there are no other addresses
JA already present.
Thanks for the clarification
Hello Nick!
On Tuesday, September 25, 2001 at 19:57:24 -0700 GMT (10:57 PM my local time)
you wrote about AB Templates:
NA Hello Kevin Coates,
NA On Tuesday, September 25 2001 at 04:45 PM PDT, you wrote:
I guess here is where I'm confused. If I do not include
%TO=[EMAIL PROTECTED
601 - 700 of 1075 matches
Mail list logo