Hi , I have looked through the archives occasionally, and finally decided to
subscribe...
I compare 10 MHz frequencies using an SBL-1 mixer and a RS232 enabled DVM.
Connect the two frequencies to be compared to the IF and RF ports, bypass the
LO port for RF, and measure the DC at the LO port.
Hi Randy,
thanks for the feedback. Would you have a suggestion for this foam, that's
RoHS and especially UL approved?
Also, when will Synergy start shipping M12M's?
thanks again,
Said
___
time-nuts mailing list
time-nuts@febo.com
Said,
The foam I settled on is 3M model 3108. It's actually a little too stiff
for this purpose, but I wanted something that would stand up to
+85C. I am having trouble getting RoHS info from 3M. I may have to
switch to something else if they don't reply.
M12M's are shipping now. Quantities are
Thanks Randy!
Bye,
Said
___
time-nuts mailing list
time-nuts@febo.com
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
Randy
In August you asked
First off, what I am about to do is ask a REALLY STUPID question, but
more and more of the GPS stuff I do is drifting towards the precision
timing end of things, so I thought I should ask.
I have been seeing a lot of traffic concerning making 10MHz frequency