On Thu, 12 Jan 2012 18:42:57 -0500
Chase Turner ke4...@gmail.com wrote:
How much cheaper would you be able to manufacture the board and send them
along, Attila? Would it be cheaper than 15 AUD?
That highly depends on the specs of the PCB and the production size.
Guestimating it's a 2.5x10cm,
On Fri, 13 Jan 2012 00:20:08 +
gonzo . cadbl...@hotmail.com wrote:
your most welcome to the original CAD files (you can then do any mods that
suit your purpose).
The design was done using the free version of Eagle, so anyone can have a go.
If you could send them to me, i would very much
On Thu, 12 Jan 2012 19:21:40 -0800
Chris Albertson albertson.ch...@gmail.com wrote:
futerlec can build 20 of the above PCBs for US$99, that's $5 each.
plus shipping. And all 20 have to ship to the same address.
Futurlec is an Australian company but mostly run in Thailand they have
offices in
From: Attila Kinali att...@kinali.ch
That highly depends on the specs of the PCB and the production size.
Guestimating it's a 2.5x10cm, dual sided PCB and using PCB-pools online
calculator, i get below 12EUR (~15AUD) per piece at a production size of
15.
For small quantities I use PCBCART
Hi All,
like many on the list I picked up one of the current
batch of cheap EF-5608A's.
Not being clear where I would end up using it, I laid
out a breakout board to make it easy to play with on the bench, but with the
expectation that it would remain attached when I got around to
This looks good. A little late for me. I'm using two perf-boards.
One for power for the I/O.
For power I found a 15V medical grade power supply at All
Electronics. They also sell a 1A EIEC power input filter that is
pre-wired with a connector that fits the both the supply and a fuse
holder.
On Thu, 12 Jan 2012 09:09:21 +
gonzo . cadbl...@hotmail.com wrote:
The cost for a complete kit is aud$10 and $5 for DX postage. I have no
idea what level of interest (if any) there will be, but I can always order
more boards if there is a demand.
Would you mind putting the
How much cheaper would you be able to manufacture the board and send them
along, Attila? Would it be cheaper than 15 AUD?
Best,
Chase
On Thu, Jan 12, 2012 at 6:38 PM, Attila Kinali att...@kinali.ch wrote:
On Thu, 12 Jan 2012 09:09:21 +
gonzo . cadbl...@hotmail.com wrote:
The cost for
a profit.
Date: Fri, 13 Jan 2012 00:38:50 +0100
From: Attila Kinali att...@kinali.ch
To: Discussion of precise time and frequency measurement
time-nuts@febo.com
Subject: Re: [time-nuts] EF-5680A Breakout board
Message-ID: 20120113003850.7bb1cf53.att...@kinali.ch
Content-Type: text/plain
On Thu, Jan 12, 2012 at 4:20 PM, gonzo . cadbl...@hotmail.com wrote:
Hi Attila,
your most welcome to the original CAD files (you can then do any mods that
suit your purpose).
The design was done using the free version of Eagle, so anyone can have a go.
As for making it cheaper, your
are: 88mm x 22mm (the same as the end view of the FE-5680A).
From: Chris Albertson albertson.ch...@gmail.com
To: Discussion of precise time and frequency measurement
time-nuts@febo.com
Subject: Re: [time-nuts] EF-5680A Breakout board
Message-ID:
CABbxVHsqXUW1W0iLeAqrOc6UrPp
@febo.com
Subject: Re: [time-nuts] EF-5680A Breakout board
Message-ID:
CABbxVHsqXUW1W0iLeAqrOc6UrPp=yosrby1ib3dooiz9ong...@mail.gmail.com
Content-Type: text/plain; charset=ISO-8859-1
On Thu, Jan 12, 2012 at 4:20 PM, gonzo . cadbl...@hotmail.com wrote:
Hi Attila,
your most welcome
Check out http://dorkbotpdx.org/wiki/pcb_order You get three boards for
$5.00 per square (or round, triangular, oval, etc) square inch ($1.67 sq/in).
No setup charge, no shipping charges in the USA. Top quality boards (gold
plated) made in the USA. You can send him Eagle or Gerber
13 matches
Mail list logo
