Now there's an interesting part number for a scanner:-)
I've had similar problems in the past trying to stitch schematics, I did
find a program some years ago that would half work, usually matching up
the ends of the lines ok, but then leaving quite significant distortion in
that region. I
They are found in the printed manual.
Speaking of which, I need a antenna setup for mine.
Cheers,
Magnus
On 04/20/2014 12:03 AM, gandal...@aol.com wrote:
I have a manual for the Stanford Research FS700 but it's lacking the
schematics, and so far I've been unable to find them.
I anyone has
Hi Magnus
Thanks for the reply.
I was aware of that, and the $35 previously mentioned in the time-nuts
archives for an original manual from SRS doesn't sound too bad, but they don't
seem to list the FS700 these days and for some other kit they now have the
manuals priced at $100 each.
Nigel,
On 04/20/2014 03:43 PM, gandal...@aol.com wrote:
Hi Magnus
Thanks for the reply.
I was aware of that, and the $35 previously mentioned in the time-nuts
archives for an original manual from SRS doesn't sound too bad, but they don't
seem to list the FS700 these days and for some other
My Fujitsu can duplex scan up to something like 40 x 12 inches.
-Chuck Harris
Magnus Danielson wrote:
Nigel,
On 04/20/2014 03:43 PM, gandal...@aol.com wrote:
Hi Magnus
Thanks for the reply.
I was aware of that, and the $35 previously mentioned in the time-nuts
archives for an original
...@febo.com] On
Behalf Of Magnus Danielson
Sent: Sunday, April 20, 2014 2:29 PM
To: time-nuts@febo.com
Subject: Re: [time-nuts] FS700 Loran-C Frequency Standard Schematics
Nigel,
On 04/20/2014 03:43 PM, gandal...@aol.com wrote:
Hi Magnus
Thanks for the reply.
I was aware of that, and the $35
I have a manual for the Stanford Research FS700 but it's lacking the
schematics, and so far I've been unable to find them.
I anyone has copies they'd be willing to share, or could point me in the
right direction, that would be much appreciated.
Regards
Nigel
GM8PZR