The question can't be answered without knowing what the range switch
does.
In my experience, the cycle that is divided into 360 degrees is the
period
of the input signal regardless of the range switch.
You don't say, but the usual GPSDO produces a 10 MHz signal, unless it's
for a telco
To: 'Discussion of precise time and frequency measurement'
time-nuts@febo.com
Sent: Thursday, February 27, 2014 5:55 PM
Subject: Re: [time-nuts] frequency comparator reading question
The question can't be answered without knowing what the range switch
does.
In my experience, the cycle that is divided
Hello,
I know this is really a basic question.
I have a Fluke montronics frequency comparator.
It has 2 inputs, one from my GPS and one from my DUT.
After a given oscillator is warmed up, I can read the meter in parts 10 -X
There are 2 meters, One for phase 0 to 360 degrees, and one
Hi
Not having one here, about all I can guess is that there are 360 degrees in a
cycle. If it’s going through 360 degrees in 10 seconds it’s 0.1 Hz off at what
ever point it’s comparing. If it takes 100 seconds that’s 0.01 Hz.
Yes I get this pesky decimal point stuff wrong from time to time
Hello Bob,
Thanks for the reality check.
I just wanted to make sure ,
From: Bob Camp li...@rtty.us
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Wednesday, February 26, 2014 10:16 PM
Subject: Re: [time-nuts] frequency
