Hi
Yes, this *is* a bit off topic. Sorry about that … I’m sure it’ll never / ever
happen
again :) …. ummm …. today ….
The voltage that supply feeds are set to is as much a public relations issue as
a
technical one. People would routinely complain “the lights are to dim”. Voltage
gets bumped
TAPR sold out the first run of TICC timestamping counters but we just
took delivery of a second batch, and we're now taking orders. See
http://tapr.org/kits_ticc for details.
John
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go
I put a small external fan on my 5370B, which keeps the heat sink at a
reasonable low temperature (Time-Nut content) -but- (Nixon segué) the power
company here also runs the voltage all the way up to the limit (126VAC)
because "many of our [rural, like me] customers are all-electric and the
load
In the US, I have seen line voltage as low as 70VAC and as high as 145VAC.
That's what I design to.
The power companies say different, but my meters don't lie.
-Original Message-
From: time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of Jeremy Nichols
Sent: Tuesday, December 19,
I had similar symptoms with LH and T-Bolt. The cause was the serial
port. As I change the serial port HW on computer site - T-Bolt was back
to track.
it was interesting enough that other devices was OK with initial Serial
port HW.
On 2017-12-19 17:20, Dan Rae wrote:
I've been trying to
polarized tantalum in correctly?
Regards,
Jerry
> On Dec 19, 2017, at 2:20 PM, Dan Rae wrote:
>
> I've been trying to get LH (V5) to control and set position for the GPS board
> in one of my GPSDOs. It is a Trimble "Lassen Ace III" Rx according to
> itself. LH auto
I don't think Heather v5.0 ever worked with the ACE-III. Heather uses the TSIP
primary and secondary timing messages to drive the display. The ACE-III (and
SV6) don't output those messages. The next release of Heather has SV6 support
and also supports the Trimble TAIP protocol that these
I've been trying to get LH (V5) to control and set position for the GPS
board in one of my GPSDOs. It is a Trimble "Lassen Ace III" Rx
according to itself. LH auto detects it quickly enough, reports it as a
TSIP receiver but then shows a screen saying "LOG: OFF", a blank graph
grid and