https://plus.google.com/u/0/photos/111617808980322733757/albums/5982995737892775185
Any have the specs ?
-pete
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the
by true time used an active down converter to transform signal
to baseband for long cable runs. Voltage to converter was rather high as
I recall
Sent from my iPhone
On Feb 21, 2014, at 6:21 PM, Pete Lancashire p...@petelancashire.com
wrote:
https://plus.google.com/u/0/photos
http://www.hp.com/hpinfo/abouthp/histnfacts/publications/measure/pdf/1968_09.pdf
pages 8 9
-pete
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions
Just a side note on running ethernet in your 'lab'.
If your doing any low noise work you may want to pay a bit extra and get
the shielded cables and make sure the RJ45 like sockets are of the shielded
type.
Example
http://www.pchcables.com/cashstpnecaw.html (just a local supplier nothing
else)
What has me also interested is I have a 5370A with its front panel pretty
much destroyed.
BB has recently released a 7 touch screen LCD w/daughter board for $119.
I see a project for next winter on the horizon.
-pete
On Sun, Feb 23, 2014 at 7:56 PM, John Seamons j...@jks.com wrote:
Please
Does this hang ?
http://www.hp.com/hpinfo/abouthp/histnfacts/publications/measure/
On Mon, Feb 24, 2014 at 8:50 AM, Richard (Rick) Karlquist
rich...@karlquist.com wrote:
I couldn't get the link to work (it just hangs).
However, I vaguely remember when we were starting
work on the 5071A
Goto one of the places selling the BB Black and look up BB View.
Not pushing this disty just one that has a decent image
http://www.element14.com/community/docs/DOC-55844/l/element14-bb-view-lcd-cape-for-beaglebone-family-boards
On Mon, Feb 24, 2014 at 1:50 AM, cheater00 .
There is a spin of FreeBSD called NanoBSD, little light on the
documentation but the name pretty much says what it is about.
Either way it looks like the BBB is opening up quite a few minds. Finally a
good combination of power, i/o etc. and not to mention
the two PRU's .. just read up on them
Idea. On the next go around for the board put the copper down and holes for
a couple small daughter cards and any support logic needed to interface
with the BBB.
The the only additional cost would be limited to the daughter board I/O
since my guess it would be SMT hence a bit hard to leave it
would go to ground.
On Sat, Mar 1, 2014 at 11:02 AM, John Seamons j...@jks.com wrote:
On Mar 2, 2014, at 7:05 AM, Pete Lancashire p...@petelancashire.com
wrote:
Idea. On the next go around for the board put the copper down and holes
for
a couple small daughter cards and any support
BA I am a bit confused over your mention of Trimble units. I'm not
familiar with them or what they are supposed to do.
BA I better do some homework.
The best thing said so far ...
Scan the archives and Google for GPSDO, do some research and reading
Then the archives for Trimble then for
A long shot that has worked for me in the past is to put a listing asking
for information on Craigslist in the town/area of interest
-pete
On Tue, Mar 11, 2014 at 10:55 AM, Tom Holmes thol...@woh.rr.com wrote:
Does anyone have any information on this box?
It has 60 kHz and 100 kHz
The old company was a Michigan LLC operating out of Texas
http://www.dleg.state.mi.us/bcs_corp/dt_llc.asp?id_nbr=D2759Jname_entity=XW,%20LLC
http://www.wysk.com/index/texas/dallas/fdn998f/xw-llc/profile
and what TX has
Lng shot
http://www5.epsondevice.com/en/quartz/index.html
US Website
http://www.eea.epson.com/portal/page/portal/home/
Toss both sites an email with fingers crossed
-pete
On Wed, Jun 4, 2014 at 10:13 AM, Glenn Little glennmaill...@bellsouth.net
wrote:
I have a board marked DMEC M1
A great loss not only to TN and the industry but to mankind
-pete
On Jun 21, 2014 1:53 AM, Poul-Henning Kamp p...@phk.freebsd.dk wrote:
In message 53a49f22.5060...@paesler.de, Hartmut Paesler writes:
unfortunately I have to deliver the sad news that Ulrich Bangert, DF6JB
passed away on
Do you have a model number or can you send me a picture ?
Have to do a Costco run this weekend
-pete
On Fri, Jul 11, 2014 at 9:16 AM, paul swed paulsw...@gmail.com wrote:
OK its been a bit hard finding the little wwvb receiver kits the last few
years.
While in costco for sub $18 Lacrosse
Just a few thoughts
The 5370A/B had a few extenders designed just for it, see page 1-7
Service Board 05370-60014 Not an extender but
added it to be complete
Extender Board 30 Pin X2 5060-0049This is a generic HP
extender
Extender Board 22 Pin X2
URL ok from here
-pete
On Fri, Aug 15, 2014 at 3:25 PM, paul swed paulsw...@gmail.com wrote:
Not sure whats up with the link when I click it I get the download. Its a
2.5MB file
http://www.glkinst.com/test-equipment/manuals/Tracor900A.pdf.
Try his main page http://www.glkinst.com
I did
Found at a surplus store today three of these guys new in the box.
The box only has on ir RCA 500 KHZ OSC. And each came with a drawing of
what is inside and what it takes to use one.
Had to buy to add to my collection.
Anyone seen these before and or know where they were used ?
If not check for shorted diodes.
-pete
On Sep 8, 2014 2:43 PM, paul swed paulsw...@gmail.com wrote:
Adrian please copy me on the pictures also.
Whats odd is the caps were bulging. You replaced them and now things are
smoking. Might one have been put in backwards?
Regards
Paul.
WB8TSL
On
AeroAntenna
AT27751995
https://plus.google.com/u/0/photos/111617808980322733757/albums/6058672650441867201
-pete
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow
I have just two of the rings that look like this. Sadly the spec sheets are
missing from the box.
-pete
On Sat, Sep 13, 2014 at 3:38 PM, Björn Gabrielsson b...@lysator.liu.se
wrote:
Look for AERAT2775_42+CR at
http://www.ngs.noaa.gov/ANTCAL/Antennas.jsp?manu=AeroAntenna
I've acquired a few new in the box Leica/AeroAntennas. Some boxes have been
opened.
https://plus.google.com/u/0/photos/111617808980322733757/albums/6052074218781475313
The complete assemble is Leica P/N 10147
The 'puck' antenna is P/N 10160
I would like to have Time-Nuts get first dibs
Does
Forgot .. I'm in Portland, Oregon 97217
-pete
On Sat, Sep 13, 2014 at 5:00 PM, Pete Lancashire p...@petelancashire.com
wrote:
I've acquired a few new in the box Leica/AeroAntennas. Some boxes have
been opened.
https://plus.google.com/u/0/photos/111617808980322733757/albums
I have been told this is the spec sheet, but I can't say for sure since it
does not say Leica
http://petelancashire.com/pictures/LeicaL1Choke-ring_AT575-90_G.pdf
-pete
On Sat, Sep 13, 2014 at 5:00 PM, Pete Lancashire p...@petelancashire.com
wrote:
I've acquired a few new in the box Leica
David,
I going to limit to one only at this price. Want to make sure as many list
members get the chance to have one.
Hope you understand
-pete
On Sat, Sep 13, 2014 at 5:18 PM, davidh dho...@gmail.com wrote:
Hi Pete,
I'll take a couple of these of your hands if possible.
I'm in
There is a slim chance more will show up
If still interested I will put your name on a list
-pete PHEW .. that was quick
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and
The last one has been spoken for.
I'll start a list if anyone is still interested, there is a slim chance
others may show up.
-pete
On Sat, Sep 13, 2014 at 5:00 PM, Pete Lancashire p...@petelancashire.com
wrote:
I've acquired a few new in the box Leica/AeroAntennas. Some boxes have
been
For geo use but something a time nut would like - lots of good pictures of
antennas
http://www.ngs.noaa.gov/ANTCAL/main.jsp
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
I've been asked to make an offer on approx 50 new in the box Alto G12 GPS
Survey receivers
http://www.cmtinc.com/fieldcmp/alto.html
They do not have, and there are non of the battery packs to be had. No
software etc.
Each has a Ashtech 710051 receiver module and a patch antenna of some make.
Can't seem to find this particular model
Oncore B8121Z1156
https://plus.google.com/u/0/photos/111617808980322733757/albums/6063969074778616993
This is the Oncore in the older GPS Handheld surveying unit
I've found older models but not the B812's
-pete
Note helpful:
http://03aa414.netsolhost.com/images/stories/ShopTalk/vpstart-up%20note.pdf
The VP Oncore Engineering Notes are here:
http://03aa414.netsolhost.com/images/stories/guides/vponcoreengnotesarchive.pdf
Cheers,
Art Sepin
- Original Message -
From: Pete Lancashire p
What is your definition of low noise / purity ?
DDS and low noise take some pretty good engineering.
What is the min frequency ?
What is the step size ?
As to PTS's it took me around an hour to make a cable write the C code to
convert to its interface needs. If I had
not lost the
I plan on removing the rear panel and making appropriate size holes on a
mill
for USB connectors something like
http://www.l-com.com/usb-panel-mount-usb-cables?cmp=011413
I will be using a shielded connector, same with the RJ45 connector
One future project would be to replace the front panel with a LCD/Touch
Panel
On Wed, Oct 8, 2014 at 6:56 AM, Chuck Harris cfhar...@erols.com wrote:
Hi Magnus,
As one of the charter users of the board, I know that. I was hoping
that some of the other users might elaborate on what John's
First three cheers to LTE for making these available.
It reminds me when Motorola made a developers kit for the then
new 68HC11 MCU available for $68.11.
I know of one design win they got that more then made of their marketing
costs.
Another that hit me is with inflation the LTE Lite is not
Was just comparing what was available to 'time nuts' in recent history, not
the commercial market.
Technology, marches on !!
-pete
On Fri, Oct 17, 2014 at 1:13 PM, S. Jackson via time-nuts
time-nuts@febo.com wrote:
Pete,
that is not inflation, that is supply and demand. The Trimble Mini-T
:
And, somehow I expect that my LTE-LITE will actually work, which my
thunderbolt never did. (Very noisy) It continues to collect dust
On 10/17/2014 3:49 PM, Pete Lancashire wrote:
First three cheers to LTE for making these available.
It reminds me when Motorola made a developers kit
I'm sorry for what I wrote
-pete bye ...
On Fri, Oct 17, 2014 at 7:46 PM, Pete Lancashire p...@petelancashire.com
wrote:
No where did I mention comparing specifications.
It was a statement of an individual Joe being able to get a GPDSO for a
very reasonable amount.
Just a usable GPDSO
On Fri, Oct 17, 2014 at 4:53 PM, Pete Lancashire
p...@petelancashire.com
wrote:
Sorry to create any misunderstanding
I was saying thanks to TVB/TAPR for all their effort, and Said/JLT for
doing what they did for the group
I was in no way comparing the used Thunderbolts
This weekend I walked over the the park next to where I live. In that park
is a water tower/tank with its safety railing covered in cell transceivers.
Looks like there are 3 providers, based on the number of power company
watthour meters I can see.
Each has their own GPS antennas, two of which
Anyone have a IEEE account ?
http://ieeexplore.ieee.org/xpl/login.jsp?tp=arnumber=560251url=http%3A%2F%2Fieeexplore.ieee.org%2Fstamp%2Fstamp.jsp%3Ftp%3D%26arnumber%3D560251
-pete
On Thu, Oct 23, 2014 at 1:07 AM, Hal Murray hmur...@megapathdsl.net wrote:
dgmin...@mediacombb.net said:
The
If you making a list of HP TIAs, don't forget the E1470A
-pete
On Sun, Oct 26, 2014 at 10:05 PM, Stewart Cobb stewart.c...@gmail.com
wrote:
This list has a lot of discussion of HP 5370 time-interval counters,
including the BeagleBone CPU upgrade. The usual sources seem to have HP
5371, 5372,
If after say a week and the current does not go down, there is one more
thing you can do before you have a tube that qualifies as a door stop. You
replace the internal HV supply with 3,500V @ 5 mA I had to do this on mine.
Keep doing it a few minutes at a time, took something like 3 hours.
No drop
I've made the seller offers before, usually takes them. IMake an offer of a
$100 with a note something like Cesium Tube is missing, all the value is
in the tube, making offer for spare parts
They are surplus guys have no idea what the thing is. They have someone
suggesting the TM vaule based on
Potato Semi's world heardquaters
http://goo.gl/P7vqMT
-pete
On Sat, Nov 8, 2014 at 9:36 AM, paul swed paulsw...@gmail.com wrote:
Heavens never heard of potato semi. Pretty interesting.
Though if you use the soic to dip boards won't that mess up the top end
signalling?
It gets tricky at
When I first discoverd the parts, that was the brick wall. They pretty much
can't drive anything. I was going to look at some line drivers I had for a
fast 4 Gbs setup but discovered I could not find them. -pete
On Sat, Nov 8, 2014 at 9:50 AM, Gerhard Hoffmann dk...@arcor.de wrote:
Am
Is this who you got it from
http://www.css-timemachines.com/
if so, why not contact them ?
-pete
On Sat, Nov 8, 2014 at 6:52 PM, Rick Thomas rbtho...@pobox.com wrote:
I just bought a Time Machines TM1000A GPS Time Server from CSS in Lincoln
Nebraska, USA.
Immediately after I plugged it in
Have you contacted your local FCC office ?
It has been about 20 years, but the FCC use to be quite proactive when
interference tickets were opened
-pete
On Fri, Nov 14, 2014 at 10:54 AM, Max Robinson m...@maxsmusicplace.com wrote:
You may have to rig up a portable or mobile receiver to track
Like to confirm
It has been said ...
When you apply power, all the LEDs on the front panel will flash. The
NO GPS light will continue flashing until you connect a GPS antenna.
Once it sees a satellite, the light will stop flashing and remain on.
The unit will conduct a self-survey for several
on what I’ve seen. I’d suspect the cable between the two units as the
source of (almost) any problem before I’d dig into the rest of the system.
Bob
On Nov 16, 2014, at 3:29 PM, Pete Lancashire p...@petelancashire.com wrote:
Like to confirm
It has been said ...
When you apply power, all
Why not just ask the seller how many they have left ?
-pete
On Mon, Nov 17, 2014 at 11:56 AM, paul swed paulsw...@gmail.com wrote:
Lost me Dave.
How do you manipulate the buy number?
Also make sure its not just the oscillator, though in yourcase you have
what you need for $75
Regards
Paul
The item is (back) on ebay which has pretty good pictures
321560316836
-pete
On Tue, Nov 18, 2014 at 12:19 PM, Don Murray via time-nuts
time-nuts@febo.com wrote:
TNX Peter!!
I had only seen a picture of REF1, with no GPS connector!!
73
Don
W4WJ
In a message dated 11/18/2014 1:07:07
The other marking on the unit is BG7TBL
do a Google search of images, interesting
Wonder who it is ?
-pete
On Tue, Nov 18, 2014 at 3:34 PM, xaos x...@darksmile.net wrote:
This is the strangest unit I have ever seen.
No documentation.
Morion OCXO
http://www.morion.com.ru/eng/
From St.
] On Behalf Of Pete =
Lancashire
Sent: Thursday, October 18, 2012 1:44 PM
To: George
Subject: 434A
Still have the boat anchor ?
-pete
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin
Try to place all files that regularly change, in this case the drift
file on storage other
then the SD card. Almost all of these storage devices SD, USB Memory etc have
a limited number of write cycles. Even a 1 MB ram disk is worth the effort.
-pete
On Tue, Oct 30, 2012 at 9:41 AM, Bob Camp
I'm also using Bob's method of resolving the issue of Life Time
-pete
On Thu, Nov 15, 2012 at 7:09 AM, Bob Smither smit...@c-c-i.com wrote:
On 11/14/2012 10:56 AM, Bob Smither wrote:
Do Rb oscillators wear out? I have found:
snip
Thanks for all the good information! I am running my
Payment is possible with Paypal or credit card.
On Fri, Nov 16, 2012 at 4:06 PM, li...@lazygranch.com wrote:
I'm just amazed Aligent doesn't take credit cards directly. Paypal is for
small time players.
___
time-nuts mailing list --
I've never been confronted with such a poor customer sevice
attitude before.
Have you bought an instrument as complex as at DTS 207x recently ?
From the mid 90's this has become the norm even with companies that were
bastions of the quality of their service manuals such as Tek and Agilent (HP)
What is the MS type for the power plug for a 5061A ?
I could not find it in the PDF I have.
-pete
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the
are
different.
Hope this helps.
Joe
-Original Message-
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On
Behalf Of Pete Lancashire
Sent: Saturday, November 24, 2012 6:51 PM
To: Discussion of precise time and frequency measurement
Subject: [time-nuts] 5061A AC
its done
http://www.ittcannon.com/uploadedFiles/Product_PDFs/MS%20AB%20Catalog.pdf
-pete
On Sat, Nov 24, 2012 at 7:40 PM, Pete Lancashire
p...@petelancashire.com wrote:
18-22S is what I needed, now to go into the depths of the garaged and
find the box of MS connectors.
-pete
On Sat, Nov 24
EIP was like many smaller TM companies, they by virtue of the size of
lack of the desire to research component, manufacturing, life cycle testing,
TQM, etc, etc. produced great instruments the day they were made. After
that things went down hill. BTW, the big boys would forget all the above
from
Has anyone posted pictures of what a dissembled 5061A tube looks like ?
Just curious
-pete
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions
I've got a couple questions on a early S/N 5061A I got a few days ago.
It took a couple days but the Ion Pump current is now down to zero
or at least less then one division on the meter.
I'm able to get the unit to go into continuous operation mode by
following the TURN-ON PROCEDURES but have
a
Thanks
This weekend I'll stick a microphone inside a piece of tubing and go looking.
The singing only occurs when the unit is in LOOP OPEN or OPER mode.
-pete
On Tue, Dec 11, 2012 at 11:26 AM, cdel...@juno.com wrote:
Pete,
The more likely singing offender is the old style A11 oven
On Sun, Dec 30, 2012 at 2:58 AM, David Kirkby david.kir...@onetel.net wrote:
On 30 December 2012 03:04, ewkehren ewkeh...@aol.com wrote:
I do feed a Rb in to all my istruments including my 7 spectrum analser.
I had two choices 301 or create 100 Mhz.
I'm not sure what a 301 is, so it
A bit late in the thread but I don't see the HP E1740A
-pete
On 1/14/13, Jonatan Walck jwa...@netnod.se wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 2013-01-11 02:48, Bob Camp wrote:
HI
One thing missing from the list was the HP 53181. It's useless as
a timing device and thus
One of the PTSs I have had a defective chip in one of the decade units. To
confirm I swapped two of them and the problem followed. Same with a analog
issue
On Mar 1, 2013 10:51 AM, Iban Cardona icard...@gmail.com wrote:
Hi,
I'm traying to use to program the bcd interface of a PTS 3200.
My
https://plus.google.com/u/0/photos/111617808980322733757/albums/5851716840178315361
$5 each
worth the $5 ?
-pete
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow
I did not get any, I will see if any are still there and get them,
once I do I'll let the list know how many etc.
and send what there is out at cost, hopefully will fit in the USPS
small flat rate box.
-pete
On Mon, Mar 4, 2013 at 8:52 PM, Pete Lancashire p...@petelancashire.com wrote:
https
/SpecSheet_iLm2700_25Oct06.pdf
On 3/5/2013 9:57 AM, Pete Lancashire wrote:
I did not get any, I will see if any are still there and get them,
once I do I'll let the list know how many etc.
and send what there is out at cost, hopefully will fit in the USPS
small flat rate box.
-pete
On Mon, Mar 4
It is soldered to the board.
There is a mix of Cell modules, Motorola, Siemens, Sierra Wireless, or nonthing.
Spec Sheet and a manual of sorts
https://docs.google.com/folder/d/0B86wM5n5RE3kRW52WGtRT0VLZDQ/edit?usp=sharing
$5 each + Shipping
Oh .. 1% ASIS
-pete
On Mon, Mar 4, 2013 at 8:52 PM, Pete
back to the original issue front panel
One thing I have had success with is emailing some of the
bigger EBay instrument sellers and asking if they have
a parts unit. It helps of you are/were a regular customer.
I repaired a 3325A that needed some buttons, a bottom panel
etc. I asked and was
toss one on the pile for me ..
-pete
Pete Lancashire
p...@petelancashire.com
On Wed, Mar 17, 2010 at 11:28 AM, David C. Partridge
david.partri...@dsl.pipex.com wrote:
The current situation is that I have almost enough statements of intent to
get to the magic 50 which will allow a price
I picked one of these up for $5 this weekend but can find almost
nothing about it. Takes 117V A/C and spits out a BNC 10 MHz.
The only thing on the front is a STBY / ON switch and two LEDs
indicating said switches position.
No surprise, nada from Anritsu.
Anyone seen/had/have one ? Comments ?
Dave Baxter scribed:
...
Amazing what you find when you google
...
specially when you put the model in as 4100 not 4000 !
Thanks for what you found.
-pete
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
error in title
390183043415
I just don't have the room for it or a 5061A mate
disclaimer: no assoc with seller other then as a customer
-pete
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
it is there in Texas
390201710366
-pete
No assoc with the seller
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
For those that have a hole in a rack that needs filling
Serial # 8164-0590
Item 120578302389
No assoc with the seller at all.
-pete
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
$17,800 the good days :-)
Did the user i/f to the HPIB ever get published ?
-pete
On Wed, Jun 2, 2010 at 1:45 PM, Rick Karlquist rich...@karlquist.com wrote:
I designed the memory board for that, among other things, and was
the project manager for a while. It seemed pretty daring to use
pity not a stand alone instrument, I was offered one for free and have seen them
on the E for as little as $20.
-pete
On Wed, Jun 2, 2010 at 2:25 PM, Rick Karlquist rich...@karlquist.com wrote:
Pete Lancashire wrote:
$17,800 the good days :-)
Did the user i/f to the HPIB ever get published
just a comment on using low cost setups
one thing they all dont have is the front end not only the amplifier but
programmable attenuator(s).
now there would be something neat as a stand alone black box to usb
-pete
On Thu, Jun 3, 2010 at 1:01 PM, Jerome Peters jpet...@nvidia.com wrote:
Just
another shot is to call/email a few calibration/met outfits. if they have work
on a few 58A, they may be able help at least narrow down what is wrong.
you will have to use your negotiating skills on what you may have to pay.
it has worked for me in the past.
-pete
On Mon, Jun 7, 2010 at 5:54
GARAGE CLEANOUT TIME ...
I've got about 20-30 of an mid 90's Odetics receivers/clocks that I'd
like to know if even worth trading etc.
They were designed for and sold to a company that only need the PPS output.
The big issue was the antenna/down converter design sucked. Within a few
months
service a million years ago.
http://petelancashire.com/gallery/main.php?g2_itemId=19826
-pete
On Sun, Jul 4, 2010 at 8:31 PM, Pete Lancashire p...@petelancashire.com wrote:
GARAGE CLEANOUT TIME ...
I've got about 20-30 of an mid 90's Odetics receivers/clocks that I'd
like to know if even worth
I just might keep one .. hmmm ... nah got to thin the herd ...
nice to know other then interference an antenna is easy.
thanks
-pete
On Sun, Jul 4, 2010 at 10:54 PM, Hal Murray hmur...@megapathdsl.net wrote:
BTW will soon have half dozen Spectracom 8170's I want make go away as well.
There
cool congrats !!
-pete
On Tue, Jul 6, 2010 at 9:43 PM, J. L. Trantham jlt...@att.net wrote:
Just a wrap up on the 5061A that had a Beam I but no 2nd Harmonic
indication.
I was originally stymied by swaps of modules with another 'functioning unit'
with no help. I then swapped CS tubes with
290454675707
no assoc with the seller
-pete
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
with a cal lab for defence department contracts
Or maybe they don't have the ability to check for output :-)
On Tue, Jul 27, 2010 at 7:04 AM, swingbyte swingb...@exemail.com.au wrote:
On 27/07/2010 11:16 PM, paul swed wrote:
it is funny. But maybe those options did turn it into a network
I would do the same ..
-pete
On Sun, Aug 1, 2010 at 11:03 PM, Heathkid heath...@heathkid.com wrote:
Stanley,
Would you be willing to do another group buy? I'll send you enough $ for
10 of them via PayPal before you buy and I know others are already willing
to buy more. I just can't
fi they are like 265's you can run them in Fleet mode and that can get
you positional updates something
like once a second.
a goal of mine with the 265W I have in the truck once I come across a
cheap Linux PC in a can that
runs off 12V
-pete
On Tue, Aug 3, 2010 at 10:04 PM, jim stephens
and dont forget to add the cost of shipping, if across the country plus
'handling' costs, you have added $20-50. Sometime just paying the
$100 or so for the 10811 that is returnable .. just another point.
-pete
On Wed, Aug 18, 2010 at 1:49 PM, K. Szeker szeke...@gmail.com wrote:
Hi Bob,
Yes
Is there an external way on the 3805's to id the desired 10811 ? S/N or ?
Ditto on the 10811's
-pete
On Mon, Sep 6, 2010 at 11:31 AM, Bob Camp li...@rtty.us wrote:
Hi
I have a couple 3805's and more than a couple TBolts.
There are two 3805's, one has the double heated 10811 the other has a
Ken would be a great person. THe HP Memory project would be another
http://www.hpmemory.org/index.htm
-pete
On Fri, Oct 1, 2010 at 3:50 PM, Brian Kirby kilodelta4foxm...@gmail.com wrote:
You might consider contacting Dr. Ken Kuhn -- kennathak...@gmail.com
check his HP museum at
be cool to put it on a oak or walnut board etc ...
-pete
On Mon, Oct 18, 2010 at 4:34 AM, Arthur Dent golgarfrinc...@yahoo.com wrote:
I went to the Flea at MIT (Cambridge, MA) yesterday and
picked up a new (nos) HP 00105-6013, which is the XTAL
oscillator assembly for the HP 105 frequency
Lother
He who stuffed me $400 in HP gear that I now don't need.
if anyone is interested in details and the legal action I may take for
the principal and the 'fun'
email me
-pete
On Tue, Oct 19, 2010 at 9:05 PM, Perry Sandeen sandee...@yahoo.com wrote:
Gents,
Wrote: 1. TestEquipTrader is
Does anyone know if the chart paper is still available ?
This fall/winter I want to play with the 117 I found, that
is after getting an antenna ... not for serious use but
would be nice to have at least one roll.
-pete
___
time-nuts mailing list --
I just checked and the 117 has about 10 feet left. Since it just
for show, that should do it for me. But if it is the type of paper
I think it is, you should be able to get it for about $8-10 a roll
with the exception the printed chart may not be what you want.
-pete
You can sometimes
paper I
also noted http://www.guyot-graphco.com/industri.htm .
73,
Bob,K1REM
-Original Message-
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com]on
Behalf Of Pete Lancashire
Sent: Thursday, April 30, 2009 11:53 AM
To: time-nuts@febo.com
Subject: [time-nuts] HP
1 - 100 of 435 matches
Mail list logo
