Please refer to
http://mail.millennium.berkeley.edu/pipermail/tinyos-help/2006-May/016654.html
you need to use the higher number of USB port for UART communication.
well, I don't have the MIB520, so I am not sure whether it helps.
regards;
Peizhao
Hemanth wrote:
Hi,
I have a TinyOS-1.x in
The LEDs should blink on the TOSBase mote if it is getting/sending radio
messages. I would try using Listen or ListenRaw to see if anything
is coming through when the LEDs flash. If no TOSBase flashing, check your
radio freq and power settings during compile. Especially on mica2, the
power is set
Hi,
I have a TinyOS-1.x installation in Ubuntu . The hardware platform is
MICA2 & MIB520.
In a test case, I have CntToLedsAndRfm uploaded on one mote A and the
TOSBase uploaded on the mote B mounted at the base station. The LEDs on
mote A blink at different frequencies as specified in the
C