Re: [Tn5250j-general] Immediate disconnect
Sorry, after re-reading the history of this email I revoke my question. Will try to look at r1156 ... Regards Martin Hi Martin, Have you looked at this issue yet? Please let me know if you can replicate the issue on your side. More and more boxes are have this problem on my side. I would like very much to use TN5250J more... not less. =) Thanks, Arpe -Original Message- From: Arpe, Kevin C Sent: Monday, June 27, 2011 11:46 AM To: tn5250j-general@lists.sourceforge.net Subject: RE: [Tn5250j-general] Immediate disconnect Martin, I ran svn update this morning, and rebuilt my JAR file. I tried again and have the same connection issue. I stepped into the debugger, but I am still stuck. No idea why this fails. Unfortunately, I am not an 5250 expert like you. =( My debugger entry point: org.tn5250j.My5250.main() Args: [JKCSPQQQ.svr.apac.jpmchase.net -p 23 -f JKCSPQQQ.props -e -t -spp 1080 -d -dn JQ] I debugged here: org.tn5250j.framework.tn5250.tnvt.connect() There is a tight loop that fails for me: while (negotiate(abyte0 = readNegotiations())); Here is the receive/send sequence: Receive: [-1, -3, 39, -1, -3, 24] Send : [-1, -5, 39] Send : [-1, -5, 24] Receive: [-1, -6, 39, 1, 3, 73, 66, 77, 82, 83, 69, 69, 68, -105, 52, 25, -84, -96, -113, -44, 40, 0, 3, -1, -16, -1, -6, 24, 1, -1, -16] Send : [-1, -6, 39, 0, 3, 75, 66, 68, 84, 89, 80, 69, 1, 66, 82, 66, 3, 67, 79, 68, 69, 80, 65, 71, 69, 1, 51, 55, 3, 67, 72, 65, 82, 83, 69, 84, 1, 54, 57, 55, 3, 68, 69, 86, 78, 65, 77, 69, 1, 74, 81, -1, -16] Send : [-1, -6, 24, 0, 73, 66, 77, 45, 51, 49, 55, 57, 45, 50, -1, -16] Receive: [-1, -3, 25, -1, -5, 25, -1, -3, 0, -1, -5, 0] Send : [-1, -5, 25] Send : [-1, -3, 25] Send : [-1, -5, 0] Send : [-1, -3, 0] Receive: no bytes, exception Can you advise? Sadly, if I use the closed-source RUMBA, I can connect. Thanks, Arpe -Original Message- From: Arpe, Kevin C Sent: Friday, June 03, 2011 5:20 PM To: tn5250j-general@lists.sourceforge.net Subject: Re: [Tn5250j-general] Immediate disconnect Martin, I build from Subversion source. Last build was about two weeks ago. I just ran svn update and I see there are some changes for revision 1156. I will try to rebuild the jar and try connecting again. Still, is there a way to increase debug output? Otherwise, I will try to step into the debugger. Thanks, Arpe -Original Message- From: Martin W. Kirst [mailto:m...@bitkings.de] Sent: Friday, June 03, 2011 5:16 PM To: tn5250j-general@lists.sourceforge.net Subject: Re: [Tn5250j-general] Immediate disconnect Hi Arpe, what version of Tn5250j do you use? tn5250j-0.6.3-jse6 OR tn5250j-0.6.3 ? Regards Martin Hi, I am now a regular user of TN5250J. I have a problem today where after connecting to one server, I am immediately disconnected. I tried to connect and login using vanilla telnet, then RUMBA. Both are OK. I am OK to connect to other servers. Below is the output. I need to provide more information to debug. How can I do this? Thanks, Arpe java -jar lib\tn5250j.jar JKCSPAPA.svr.apac.jpmchase.net -p 23 -e -t -spp 1080 -d -dn JA BootStrapper listening WARN [org.tn5250j.My5250] Information Message: Can not find scripting support files, scripting will not be available: Failed to load interpreter drivers java.lang.NoClassDefFoundError: org/python/core/PyException java.lang.NullPointerException at org.tn5250j.Gui5250Frame.determineTabName(Unknown Source) at org.tn5250j.Gui5250Frame.setSessionTitle(Unknown Source) at org.tn5250j.Gui5250Frame.jbInit(Unknown Source) at org.tn5250j.Gui5250Frame.init(Unknown Source) at org.tn5250j.My5250.newView(Unknown Source) at org.tn5250j.My5250.init(Unknown Source) at org.tn5250j.My5250.main(Unknown Source) INFO [org.tn5250j.framework.common.SessionManager] New session Manager initialized INFO [org.tn5250j.framework.Tn5250jController] plugin directory is: C:\eclipse\workspace2\JPM-AS400\ext WARN [org.tn5250j.framework.Tn5250jController] Plugin path 'C:\eclipse\workspace2\JPM-AS400\ext' does not exist. No plugins will be loaded. INFO [org.tn5250j.framework.Tn5250jController] Tn5250j plugin manager created INFO [org.tn5250j.framework.Tn5250jController] Tn5250j plugin manager started INFO [org.tn5250j.framework.tn5250.tnvt] new session - JKCSPAPA.svr.apac.jpmchase.net INFO [org.tn5250j.framework.transport.SocketConnector] Creating Plain Socket WARN [org.tn5250j.framework.tn5250.tnvt] connect() Connection closed. INFO [org.tn5250j.framework.tn5250.tnvt] Closing socket INFO [org.tn5250j.My5250] session found and closing down INFO [org.tn5250j.Gui5250Frame] session found and closing down 0 INFO [org.tn5250j.My5250] disconnecting socket INFO [org.tn5250j.My5250] socket closed INFO [org.tn5250j.My5250] view settings -s JKCSPAPA.svr.apac.jpmchase.net This email
Re: [Tn5250j-general] Immediate disconnect
Martin, That is a good idea. I'll grab some old releases from sf.net and see if it works for me. Currently, I only use SVN source... compile myself using Ant+javac. I'll report back in a day or two. In parallel, how much can this negotiation code change between releases? You could just focus on this area first. Thanks, Arpe -Original Message- From: Martin W. Kirst [mailto:m...@bitkings.de] Sent: Wednesday, July 13, 2011 4:36 PM To: tn5250j-general@lists.sourceforge.net Subject: Re: [Tn5250j-general] Immediate disconnect Hi Arpe, not yet ... Just a formal question, did it work with TN5250j before (I mean not SVN trunk)? If yes, would you please send me the version number, so I may have a chance to figure out what falls apart. Regards Martin Hi Martin, Have you looked at this issue yet? Please let me know if you can replicate the issue on your side. More and more boxes are have this problem on my side. I would like very much to use TN5250J more... not less. =) Thanks, Arpe -Original Message- From: Arpe, Kevin C Sent: Monday, June 27, 2011 11:46 AM To: tn5250j-general@lists.sourceforge.net Subject: RE: [Tn5250j-general] Immediate disconnect Martin, I ran svn update this morning, and rebuilt my JAR file. I tried again and have the same connection issue. I stepped into the debugger, but I am still stuck. No idea why this fails. Unfortunately, I am not an 5250 expert like you. =( My debugger entry point: org.tn5250j.My5250.main() Args: [JKCSPQQQ.svr.apac.jpmchase.net -p 23 -f JKCSPQQQ.props -e -t -spp 1080 -d -dn JQ] I debugged here: org.tn5250j.framework.tn5250.tnvt.connect() There is a tight loop that fails for me: while (negotiate(abyte0 = readNegotiations())); Here is the receive/send sequence: Receive: [-1, -3, 39, -1, -3, 24] Send : [-1, -5, 39] Send : [-1, -5, 24] Receive: [-1, -6, 39, 1, 3, 73, 66, 77, 82, 83, 69, 69, 68, -105, 52, 25, -84, -96, -113, -44, 40, 0, 3, -1, -16, -1, -6, 24, 1, -1, -16] Send : [-1, -6, 39, 0, 3, 75, 66, 68, 84, 89, 80, 69, 1, 66, 82, 66, 3, 67, 79, 68, 69, 80, 65, 71, 69, 1, 51, 55, 3, 67, 72, 65, 82, 83, 69, 84, 1, 54, 57, 55, 3, 68, 69, 86, 78, 65, 77, 69, 1, 74, 81, -1, -16] Send : [-1, -6, 24, 0, 73, 66, 77, 45, 51, 49, 55, 57, 45, 50, -1, -16] Receive: [-1, -3, 25, -1, -5, 25, -1, -3, 0, -1, -5, 0] Send : [-1, -5, 25] Send : [-1, -3, 25] Send : [-1, -5, 0] Send : [-1, -3, 0] Receive: no bytes, exception Can you advise? Sadly, if I use the closed-source RUMBA, I can connect. Thanks, Arpe -Original Message- From: Arpe, Kevin C Sent: Friday, June 03, 2011 5:20 PM To: tn5250j-general@lists.sourceforge.net Subject: Re: [Tn5250j-general] Immediate disconnect Martin, I build from Subversion source. Last build was about two weeks ago. I just ran svn update and I see there are some changes for revision 1156. I will try to rebuild the jar and try connecting again. Still, is there a way to increase debug output? Otherwise, I will try to step into the debugger. Thanks, Arpe -Original Message- From: Martin W. Kirst [mailto:m...@bitkings.de] Sent: Friday, June 03, 2011 5:16 PM To: tn5250j-general@lists.sourceforge.net Subject: Re: [Tn5250j-general] Immediate disconnect Hi Arpe, what version of Tn5250j do you use? tn5250j-0.6.3-jse6 OR tn5250j-0.6.3 ? Regards Martin Hi, I am now a regular user of TN5250J. I have a problem today where after connecting to one server, I am immediately disconnected. I tried to connect and login using vanilla telnet, then RUMBA. Both are OK. I am OK to connect to other servers. Below is the output. I need to provide more information to debug. How can I do this? Thanks, Arpe java -jar lib\tn5250j.jar JKCSPAPA.svr.apac.jpmchase.net -p 23 -e -t -spp 1080 -d -dn JA BootStrapper listening WARN [org.tn5250j.My5250] Information Message: Can not find scripting support files, scripting will not be available: Failed to load interpreter drivers java.lang.NoClassDefFoundError: org/python/core/PyException java.lang.NullPointerException at org.tn5250j.Gui5250Frame.determineTabName(Unknown Source) at org.tn5250j.Gui5250Frame.setSessionTitle(Unknown Source) at org.tn5250j.Gui5250Frame.jbInit(Unknown Source) at org.tn5250j.Gui5250Frame.init(Unknown Source) at org.tn5250j.My5250.newView(Unknown Source) at org.tn5250j.My5250.init(Unknown Source) at org.tn5250j.My5250.main(Unknown Source) INFO [org.tn5250j.framework.common.SessionManager] New session Manager initialized INFO [org.tn5250j.framework.Tn5250jController] plugin directory is: C:\eclipse\workspace2\JPM-AS400\ext WARN [org.tn5250j.framework.Tn5250jController] Plugin path 'C:\eclipse\workspace2\JPM-AS400\ext' does not exist. No plugins will be loaded. INFO [org.tn5250j.framework.Tn5250jController] Tn5250j plugin manager created INFO
Re: [Tn5250j-general] Immediate disconnect
Martin, Sorry, I just re-read my response and realised that I did not answer your question! Yes, it used to work. More specifically, it breaks after a login macro runs with a bad password. I write little login macros to enter user/pass and set my library list. Sometimes, these macros get out of date. The login screen rejects my login. So naturally, now I am *very* careful about the password in my login macros. After this occurs, I can never connect to the machine again using TN5250J. Even if I remove/disable the login macro. Very strange. Shall we call this AS/400 Artificial Intelligence? =) Sadly, RUMBA (grr) continues to work. Thanks, Arpe -Original Message- From: Arpe, Kevin C Sent: Wednesday, July 13, 2011 5:53 PM To: tn5250j-general@lists.sourceforge.net Subject: Re: [Tn5250j-general] Immediate disconnect Martin, That is a good idea. I'll grab some old releases from sf.net and see if it works for me. Currently, I only use SVN source... compile myself using Ant+javac. I'll report back in a day or two. In parallel, how much can this negotiation code change between releases? You could just focus on this area first. Thanks, Arpe -Original Message- From: Martin W. Kirst [mailto:m...@bitkings.de] Sent: Wednesday, July 13, 2011 4:36 PM To: tn5250j-general@lists.sourceforge.net Subject: Re: [Tn5250j-general] Immediate disconnect Hi Arpe, not yet ... Just a formal question, did it work with TN5250j before (I mean not SVN trunk)? If yes, would you please send me the version number, so I may have a chance to figure out what falls apart. Regards Martin Hi Martin, Have you looked at this issue yet? Please let me know if you can replicate the issue on your side. More and more boxes are have this problem on my side. I would like very much to use TN5250J more... not less. =) Thanks, Arpe -Original Message- From: Arpe, Kevin C Sent: Monday, June 27, 2011 11:46 AM To: tn5250j-general@lists.sourceforge.net Subject: RE: [Tn5250j-general] Immediate disconnect Martin, I ran svn update this morning, and rebuilt my JAR file. I tried again and have the same connection issue. I stepped into the debugger, but I am still stuck. No idea why this fails. Unfortunately, I am not an 5250 expert like you. =( My debugger entry point: org.tn5250j.My5250.main() Args: [JKCSPQQQ.svr.apac.jpmchase.net -p 23 -f JKCSPQQQ.props -e -t -spp 1080 -d -dn JQ] I debugged here: org.tn5250j.framework.tn5250.tnvt.connect() There is a tight loop that fails for me: while (negotiate(abyte0 = readNegotiations())); Here is the receive/send sequence: Receive: [-1, -3, 39, -1, -3, 24] Send : [-1, -5, 39] Send : [-1, -5, 24] Receive: [-1, -6, 39, 1, 3, 73, 66, 77, 82, 83, 69, 69, 68, -105, 52, 25, -84, -96, -113, -44, 40, 0, 3, -1, -16, -1, -6, 24, 1, -1, -16] Send : [-1, -6, 39, 0, 3, 75, 66, 68, 84, 89, 80, 69, 1, 66, 82, 66, 3, 67, 79, 68, 69, 80, 65, 71, 69, 1, 51, 55, 3, 67, 72, 65, 82, 83, 69, 84, 1, 54, 57, 55, 3, 68, 69, 86, 78, 65, 77, 69, 1, 74, 81, -1, -16] Send : [-1, -6, 24, 0, 73, 66, 77, 45, 51, 49, 55, 57, 45, 50, -1, -16] Receive: [-1, -3, 25, -1, -5, 25, -1, -3, 0, -1, -5, 0] Send : [-1, -5, 25] Send : [-1, -3, 25] Send : [-1, -5, 0] Send : [-1, -3, 0] Receive: no bytes, exception Can you advise? Sadly, if I use the closed-source RUMBA, I can connect. Thanks, Arpe -Original Message- From: Arpe, Kevin C Sent: Friday, June 03, 2011 5:20 PM To: tn5250j-general@lists.sourceforge.net Subject: Re: [Tn5250j-general] Immediate disconnect Martin, I build from Subversion source. Last build was about two weeks ago. I just ran svn update and I see there are some changes for revision 1156. I will try to rebuild the jar and try connecting again. Still, is there a way to increase debug output? Otherwise, I will try to step into the debugger. Thanks, Arpe -Original Message- From: Martin W. Kirst [mailto:m...@bitkings.de] Sent: Friday, June 03, 2011 5:16 PM To: tn5250j-general@lists.sourceforge.net Subject: Re: [Tn5250j-general] Immediate disconnect Hi Arpe, what version of Tn5250j do you use? tn5250j-0.6.3-jse6 OR tn5250j-0.6.3 ? Regards Martin Hi, I am now a regular user of TN5250J. I have a problem today where after connecting to one server, I am immediately disconnected. I tried to connect and login using vanilla telnet, then RUMBA. Both are OK. I am OK to connect to other servers. Below is the output. I need to provide more information to debug. How can I do this? Thanks, Arpe java -jar lib\tn5250j.jar JKCSPAPA.svr.apac.jpmchase.net -p 23 -e -t -spp 1080 -d -dn JA BootStrapper listening WARN [org.tn5250j.My5250] Information Message: Can not find scripting support files, scripting will not be available: Failed to load interpreter drivers java.lang.NoClassDefFoundError: org/python/core/PyException java.lang.NullPointerException
Re: [Tn5250j-general] Immediate disconnect
Hi Arpe, did you've checked your 'device name'? By default, AS400 will terminate a named device from connection, when there were to many login failures. This means, in your connection settings you're using '-dn JQ'. So AS400 will block/disconnected device 'JQ' until next IPL. Try to not use '-dn' parameter and you should connect again. If so, I consider this not a bug in TN5250j and this issue is closed ;-) Please, give feedback about. Regards Martin Martin, Sorry, I just re-read my response and realised that I did not answer your question! Yes, it used to work. More specifically, it breaks after a login macro runs with a bad password. I write little login macros to enter user/pass and set my library list. Sometimes, these macros get out of date. The login screen rejects my login. So naturally, now I am *very* careful about the password in my login macros. After this occurs, I can never connect to the machine again using TN5250J. Even if I remove/disable the login macro. Very strange. Shall we call this AS/400 Artificial Intelligence? =) Sadly, RUMBA (grr) continues to work. Thanks, Arpe -Original Message- From: Arpe, Kevin C Sent: Wednesday, July 13, 2011 5:53 PM To: tn5250j-general@lists.sourceforge.net Subject: Re: [Tn5250j-general] Immediate disconnect Martin, That is a good idea. I'll grab some old releases from sf.net and see if it works for me. Currently, I only use SVN source... compile myself using Ant+javac. I'll report back in a day or two. In parallel, how much can this negotiation code change between releases? You could just focus on this area first. Thanks, Arpe -Original Message- From: Martin W. Kirst [mailto:m...@bitkings.de] Sent: Wednesday, July 13, 2011 4:36 PM To: tn5250j-general@lists.sourceforge.net Subject: Re: [Tn5250j-general] Immediate disconnect Hi Arpe, not yet ... Just a formal question, did it work with TN5250j before (I mean not SVN trunk)? If yes, would you please send me the version number, so I may have a chance to figure out what falls apart. Regards Martin Hi Martin, Have you looked at this issue yet? Please let me know if you can replicate the issue on your side. More and more boxes are have this problem on my side. I would like very much to use TN5250J more... not less. =) Thanks, Arpe -Original Message- From: Arpe, Kevin C Sent: Monday, June 27, 2011 11:46 AM To: tn5250j-general@lists.sourceforge.net Subject: RE: [Tn5250j-general] Immediate disconnect Martin, I ran svn update this morning, and rebuilt my JAR file. I tried again and have the same connection issue. I stepped into the debugger, but I am still stuck. No idea why this fails. Unfortunately, I am not an 5250 expert like you. =( My debugger entry point: org.tn5250j.My5250.main() Args: [JKCSPQQQ.svr.apac.jpmchase.net -p 23 -f JKCSPQQQ.props -e -t -spp 1080 -d -dn JQ] I debugged here: org.tn5250j.framework.tn5250.tnvt.connect() There is a tight loop that fails for me: while (negotiate(abyte0 = readNegotiations())); Here is the receive/send sequence: Receive: [-1, -3, 39, -1, -3, 24] Send : [-1, -5, 39] Send : [-1, -5, 24] Receive: [-1, -6, 39, 1, 3, 73, 66, 77, 82, 83, 69, 69, 68, -105, 52, 25, -84, -96, -113, -44, 40, 0, 3, -1, -16, -1, -6, 24, 1, -1, -16] Send : [-1, -6, 39, 0, 3, 75, 66, 68, 84, 89, 80, 69, 1, 66, 82, 66, 3, 67, 79, 68, 69, 80, 65, 71, 69, 1, 51, 55, 3, 67, 72, 65, 82, 83, 69, 84, 1, 54, 57, 55, 3, 68, 69, 86, 78, 65, 77, 69, 1, 74, 81, -1, -16] Send : [-1, -6, 24, 0, 73, 66, 77, 45, 51, 49, 55, 57, 45, 50, -1, -16] Receive: [-1, -3, 25, -1, -5, 25, -1, -3, 0, -1, -5, 0] Send : [-1, -5, 25] Send : [-1, -3, 25] Send : [-1, -5, 0] Send : [-1, -3, 0] Receive: no bytes, exception Can you advise? Sadly, if I use the closed-source RUMBA, I can connect. Thanks, Arpe -Original Message- From: Arpe, Kevin C Sent: Friday, June 03, 2011 5:20 PM To: tn5250j-general@lists.sourceforge.net Subject: Re: [Tn5250j-general] Immediate disconnect Martin, I build from Subversion source. Last build was about two weeks ago. I just ran svn update and I see there are some changes for revision 1156. I will try to rebuild the jar and try connecting again. Still, is there a way to increase debug output? Otherwise, I will try to step into the debugger. Thanks, Arpe -Original Message- From: Martin W. Kirst [mailto:m...@bitkings.de] Sent: Friday, June 03, 2011 5:16 PM To: tn5250j-general@lists.sourceforge.net Subject: Re: [Tn5250j-general] Immediate disconnect Hi Arpe, what version of Tn5250j do you use? tn5250j-0.6.3-jse6 OR tn5250j-0.6.3 ? Regards Martin Hi, I am now a regular user of TN5250J. I have a problem today where after connecting to one server, I am immediately disconnected. I tried to connect and login using vanilla telnet, then RUMBA. Both are OK. I am OK
Re: [Tn5250j-general] Immediate disconnect
Martin, Brilliant! It works now. I will remove this argument from my launcher script. Many thanks for your help. Case closed! Is there a way to detect this error and display to user in a dialog? (Suggest this is the reason for immediate disconnect...) Thanks, Arpe -Original Message- From: Martin W. Kirst [mailto:m...@bitkings.de] Sent: Wednesday, July 13, 2011 7:35 PM To: tn5250j-general@lists.sourceforge.net Subject: Re: [Tn5250j-general] Immediate disconnect Hi Arpe, did you've checked your 'device name'? By default, AS400 will terminate a named device from connection, when there were to many login failures. This means, in your connection settings you're using '-dn JQ'. So AS400 will block/disconnected device 'JQ' until next IPL. Try to not use '-dn' parameter and you should connect again. If so, I consider this not a bug in TN5250j and this issue is closed ;-) Please, give feedback about. Regards Martin Martin, Sorry, I just re-read my response and realised that I did not answer your question! Yes, it used to work. More specifically, it breaks after a login macro runs with a bad password. I write little login macros to enter user/pass and set my library list. Sometimes, these macros get out of date. The login screen rejects my login. So naturally, now I am *very* careful about the password in my login macros. After this occurs, I can never connect to the machine again using TN5250J. Even if I remove/disable the login macro. Very strange. Shall we call this AS/400 Artificial Intelligence? =) Sadly, RUMBA (grr) continues to work. Thanks, Arpe -Original Message- From: Arpe, Kevin C Sent: Wednesday, July 13, 2011 5:53 PM To: tn5250j-general@lists.sourceforge.net Subject: Re: [Tn5250j-general] Immediate disconnect Martin, That is a good idea. I'll grab some old releases from sf.net and see if it works for me. Currently, I only use SVN source... compile myself using Ant+javac. I'll report back in a day or two. In parallel, how much can this negotiation code change between releases? You could just focus on this area first. Thanks, Arpe -Original Message- From: Martin W. Kirst [mailto:m...@bitkings.de] Sent: Wednesday, July 13, 2011 4:36 PM To: tn5250j-general@lists.sourceforge.net Subject: Re: [Tn5250j-general] Immediate disconnect Hi Arpe, not yet ... Just a formal question, did it work with TN5250j before (I mean not SVN trunk)? If yes, would you please send me the version number, so I may have a chance to figure out what falls apart. Regards Martin Hi Martin, Have you looked at this issue yet? Please let me know if you can replicate the issue on your side. More and more boxes are have this problem on my side. I would like very much to use TN5250J more... not less. =) Thanks, Arpe -Original Message- From: Arpe, Kevin C Sent: Monday, June 27, 2011 11:46 AM To: tn5250j-general@lists.sourceforge.net Subject: RE: [Tn5250j-general] Immediate disconnect Martin, I ran svn update this morning, and rebuilt my JAR file. I tried again and have the same connection issue. I stepped into the debugger, but I am still stuck. No idea why this fails. Unfortunately, I am not an 5250 expert like you. =( My debugger entry point: org.tn5250j.My5250.main() Args: [JKCSPQQQ.svr.apac.jpmchase.net -p 23 -f JKCSPQQQ.props -e -t -spp 1080 -d -dn JQ] I debugged here: org.tn5250j.framework.tn5250.tnvt.connect() There is a tight loop that fails for me: while (negotiate(abyte0 = readNegotiations())); Here is the receive/send sequence: Receive: [-1, -3, 39, -1, -3, 24] Send : [-1, -5, 39] Send : [-1, -5, 24] Receive: [-1, -6, 39, 1, 3, 73, 66, 77, 82, 83, 69, 69, 68, -105, 52, 25, -84, -96, -113, -44, 40, 0, 3, -1, -16, -1, -6, 24, 1, -1, -16] Send : [-1, -6, 39, 0, 3, 75, 66, 68, 84, 89, 80, 69, 1, 66, 82, 66, 3, 67, 79, 68, 69, 80, 65, 71, 69, 1, 51, 55, 3, 67, 72, 65, 82, 83, 69, 84, 1, 54, 57, 55, 3, 68, 69, 86, 78, 65, 77, 69, 1, 74, 81, -1, -16] Send : [-1, -6, 24, 0, 73, 66, 77, 45, 51, 49, 55, 57, 45, 50, -1, -16] Receive: [-1, -3, 25, -1, -5, 25, -1, -3, 0, -1, -5, 0] Send : [-1, -5, 25] Send : [-1, -3, 25] Send : [-1, -5, 0] Send : [-1, -3, 0] Receive: no bytes, exception Can you advise? Sadly, if I use the closed-source RUMBA, I can connect. Thanks, Arpe -Original Message- From: Arpe, Kevin C Sent: Friday, June 03, 2011 5:20 PM To: tn5250j-general@lists.sourceforge.net Subject: Re: [Tn5250j-general] Immediate disconnect Martin, I build from Subversion source. Last build was about two weeks ago. I just ran svn update and I see there are some changes for revision 1156. I will try to rebuild the jar and try connecting again. Still, is there a way to increase debug output? Otherwise, I will try to step into the debugger. Thanks, Arpe -Original Message- From: Martin W. Kirst [mailto:m
Re: [Tn5250j-general] Immediate disconnect
Hi Martin, Have you looked at this issue yet? Please let me know if you can replicate the issue on your side. More and more boxes are have this problem on my side. I would like very much to use TN5250J more... not less. =) Thanks, Arpe -Original Message- From: Arpe, Kevin C Sent: Monday, June 27, 2011 11:46 AM To: tn5250j-general@lists.sourceforge.net Subject: RE: [Tn5250j-general] Immediate disconnect Martin, I ran svn update this morning, and rebuilt my JAR file. I tried again and have the same connection issue. I stepped into the debugger, but I am still stuck. No idea why this fails. Unfortunately, I am not an 5250 expert like you. =( My debugger entry point: org.tn5250j.My5250.main() Args: [JKCSPQQQ.svr.apac.jpmchase.net -p 23 -f JKCSPQQQ.props -e -t -spp 1080 -d -dn JQ] I debugged here: org.tn5250j.framework.tn5250.tnvt.connect() There is a tight loop that fails for me: while (negotiate(abyte0 = readNegotiations())); Here is the receive/send sequence: Receive: [-1, -3, 39, -1, -3, 24] Send : [-1, -5, 39] Send : [-1, -5, 24] Receive: [-1, -6, 39, 1, 3, 73, 66, 77, 82, 83, 69, 69, 68, -105, 52, 25, -84, -96, -113, -44, 40, 0, 3, -1, -16, -1, -6, 24, 1, -1, -16] Send : [-1, -6, 39, 0, 3, 75, 66, 68, 84, 89, 80, 69, 1, 66, 82, 66, 3, 67, 79, 68, 69, 80, 65, 71, 69, 1, 51, 55, 3, 67, 72, 65, 82, 83, 69, 84, 1, 54, 57, 55, 3, 68, 69, 86, 78, 65, 77, 69, 1, 74, 81, -1, -16] Send : [-1, -6, 24, 0, 73, 66, 77, 45, 51, 49, 55, 57, 45, 50, -1, -16] Receive: [-1, -3, 25, -1, -5, 25, -1, -3, 0, -1, -5, 0] Send : [-1, -5, 25] Send : [-1, -3, 25] Send : [-1, -5, 0] Send : [-1, -3, 0] Receive: no bytes, exception Can you advise? Sadly, if I use the closed-source RUMBA, I can connect. Thanks, Arpe -Original Message- From: Arpe, Kevin C Sent: Friday, June 03, 2011 5:20 PM To: tn5250j-general@lists.sourceforge.net Subject: Re: [Tn5250j-general] Immediate disconnect Martin, I build from Subversion source. Last build was about two weeks ago. I just ran svn update and I see there are some changes for revision 1156. I will try to rebuild the jar and try connecting again. Still, is there a way to increase debug output? Otherwise, I will try to step into the debugger. Thanks, Arpe -Original Message- From: Martin W. Kirst [mailto:m...@bitkings.de] Sent: Friday, June 03, 2011 5:16 PM To: tn5250j-general@lists.sourceforge.net Subject: Re: [Tn5250j-general] Immediate disconnect Hi Arpe, what version of Tn5250j do you use? tn5250j-0.6.3-jse6 OR tn5250j-0.6.3 ? Regards Martin Hi, I am now a regular user of TN5250J. I have a problem today where after connecting to one server, I am immediately disconnected. I tried to connect and login using vanilla telnet, then RUMBA. Both are OK. I am OK to connect to other servers. Below is the output. I need to provide more information to debug. How can I do this? Thanks, Arpe java -jar lib\tn5250j.jar JKCSPAPA.svr.apac.jpmchase.net -p 23 -e -t -spp 1080 -d -dn JA BootStrapper listening WARN [org.tn5250j.My5250] Information Message: Can not find scripting support files, scripting will not be available: Failed to load interpreter drivers java.lang.NoClassDefFoundError: org/python/core/PyException java.lang.NullPointerException at org.tn5250j.Gui5250Frame.determineTabName(Unknown Source) at org.tn5250j.Gui5250Frame.setSessionTitle(Unknown Source) at org.tn5250j.Gui5250Frame.jbInit(Unknown Source) at org.tn5250j.Gui5250Frame.init(Unknown Source) at org.tn5250j.My5250.newView(Unknown Source) at org.tn5250j.My5250.init(Unknown Source) at org.tn5250j.My5250.main(Unknown Source) INFO [org.tn5250j.framework.common.SessionManager] New session Manager initialized INFO [org.tn5250j.framework.Tn5250jController] plugin directory is: C:\eclipse\workspace2\JPM-AS400\ext WARN [org.tn5250j.framework.Tn5250jController] Plugin path 'C:\eclipse\workspace2\JPM-AS400\ext' does not exist. No plugins will be loaded. INFO [org.tn5250j.framework.Tn5250jController] Tn5250j plugin manager created INFO [org.tn5250j.framework.Tn5250jController] Tn5250j plugin manager started INFO [org.tn5250j.framework.tn5250.tnvt] new session - JKCSPAPA.svr.apac.jpmchase.net INFO [org.tn5250j.framework.transport.SocketConnector] Creating Plain Socket WARN [org.tn5250j.framework.tn5250.tnvt] connect() Connection closed. INFO [org.tn5250j.framework.tn5250.tnvt] Closing socket INFO [org.tn5250j.My5250] session found and closing down INFO [org.tn5250j.Gui5250Frame] session found and closing down 0 INFO [org.tn5250j.My5250] disconnecting socket INFO [org.tn5250j.My5250] socket closed INFO [org.tn5250j.My5250] view settings -s JKCSPAPA.svr.apac.jpmchase.net This email is confidential and subject to important disclaimers and conditions including on offers for the purchase or sale of securities, accuracy and completeness of information, viruses
[Tn5250j-general] Immediate disconnect
Hi, I am now a regular user of TN5250J. I have a problem today where after connecting to one server, I am immediately disconnected. I tried to connect and login using vanilla telnet, then RUMBA. Both are OK. I am OK to connect to other servers. Below is the output. I need to provide more information to debug. How can I do this? Thanks, Arpe java -jar lib\tn5250j.jar JKCSPAPA.svr.apac.jpmchase.net -p 23 -e -t -spp 1080 -d -dn JA BootStrapper listening WARN [org.tn5250j.My5250] Information Message: Can not find scripting support files, scripting will not be available: Failed to load interpreter drivers java.lang.NoClassDefFoundError: org/python/core/PyException java.lang.NullPointerException at org.tn5250j.Gui5250Frame.determineTabName(Unknown Source) at org.tn5250j.Gui5250Frame.setSessionTitle(Unknown Source) at org.tn5250j.Gui5250Frame.jbInit(Unknown Source) at org.tn5250j.Gui5250Frame.init(Unknown Source) at org.tn5250j.My5250.newView(Unknown Source) at org.tn5250j.My5250.init(Unknown Source) at org.tn5250j.My5250.main(Unknown Source) INFO [org.tn5250j.framework.common.SessionManager] New session Manager initialized INFO [org.tn5250j.framework.Tn5250jController] plugin directory is: C:\eclipse\workspace2\JPM-AS400\ext WARN [org.tn5250j.framework.Tn5250jController] Plugin path 'C:\eclipse\workspace2\JPM-AS400\ext' does not exist. No plugins will be loaded. INFO [org.tn5250j.framework.Tn5250jController] Tn5250j plugin manager created INFO [org.tn5250j.framework.Tn5250jController] Tn5250j plugin manager started INFO [org.tn5250j.framework.tn5250.tnvt] new session - JKCSPAPA.svr.apac.jpmchase.net INFO [org.tn5250j.framework.transport.SocketConnector] Creating Plain Socket WARN [org.tn5250j.framework.tn5250.tnvt] connect() Connection closed. INFO [org.tn5250j.framework.tn5250.tnvt] Closing socket INFO [org.tn5250j.My5250] session found and closing down INFO [org.tn5250j.Gui5250Frame] session found and closing down 0 INFO [org.tn5250j.My5250] disconnecting socket INFO [org.tn5250j.My5250] socket closed INFO [org.tn5250j.My5250] view settings -s JKCSPAPA.svr.apac.jpmchase.net This email is confidential and subject to important disclaimers and conditions including on offers for the purchase or sale of securities, accuracy and completeness of information, viruses, confidentiality, legal privilege, and legal entity disclaimers, available at http://www.jpmorgan.com/pages/disclosures/email. -- Simplify data backup and recovery for your virtual environment with vRanger. Installation's a snap, and flexible recovery options mean your data is safe, secure and there when you need it. Discover what all the cheering's about. Get your free trial download today. http://p.sf.net/sfu/quest-dev2dev2 ___ Tn5250j-general mailing list Tn5250j-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/tn5250j-general
Re: [Tn5250j-general] Immediate disconnect
Hi Arpe, what version of Tn5250j do you use? tn5250j-0.6.3-jse6 OR tn5250j-0.6.3 ? Regards Martin Hi, I am now a regular user of TN5250J. I have a problem today where after connecting to one server, I am immediately disconnected. I tried to connect and login using vanilla telnet, then RUMBA. Both are OK. I am OK to connect to other servers. Below is the output. I need to provide more information to debug. How can I do this? Thanks, Arpe java -jar lib\tn5250j.jar JKCSPAPA.svr.apac.jpmchase.net -p 23 -e -t -spp 1080 -d -dn JA BootStrapper listening WARN [org.tn5250j.My5250] Information Message: Can not find scripting support files, scripting will not be available: Failed to load interpreter drivers java.lang.NoClassDefFoundError: org/python/core/PyException java.lang.NullPointerException at org.tn5250j.Gui5250Frame.determineTabName(Unknown Source) at org.tn5250j.Gui5250Frame.setSessionTitle(Unknown Source) at org.tn5250j.Gui5250Frame.jbInit(Unknown Source) at org.tn5250j.Gui5250Frame.init(Unknown Source) at org.tn5250j.My5250.newView(Unknown Source) at org.tn5250j.My5250.init(Unknown Source) at org.tn5250j.My5250.main(Unknown Source) INFO [org.tn5250j.framework.common.SessionManager] New session Manager initialized INFO [org.tn5250j.framework.Tn5250jController] plugin directory is: C:\eclipse\workspace2\JPM-AS400\ext WARN [org.tn5250j.framework.Tn5250jController] Plugin path 'C:\eclipse\workspace2\JPM-AS400\ext' does not exist. No plugins will be loaded. INFO [org.tn5250j.framework.Tn5250jController] Tn5250j plugin manager created INFO [org.tn5250j.framework.Tn5250jController] Tn5250j plugin manager started INFO [org.tn5250j.framework.tn5250.tnvt] new session - JKCSPAPA.svr.apac.jpmchase.net INFO [org.tn5250j.framework.transport.SocketConnector] Creating Plain Socket WARN [org.tn5250j.framework.tn5250.tnvt] connect() Connection closed. INFO [org.tn5250j.framework.tn5250.tnvt] Closing socket INFO [org.tn5250j.My5250] session found and closing down INFO [org.tn5250j.Gui5250Frame] session found and closing down 0 INFO [org.tn5250j.My5250] disconnecting socket INFO [org.tn5250j.My5250] socket closed INFO [org.tn5250j.My5250] view settings -s JKCSPAPA.svr.apac.jpmchase.net This email is confidential and subject to important disclaimers and conditions including on offers for the purchase or sale of securities, accuracy and completeness of information, viruses, confidentiality, legal privilege, and legal entity disclaimers, available at http://www.jpmorgan.com/pages/disclosures/email. -- Simplify data backup and recovery for your virtual environment with vRanger. Installation's a snap, and flexible recovery options mean your data is safe, secure and there when you need it. Discover what all the cheering's about. Get your free trial download today. http://p.sf.net/sfu/quest-dev2dev2 ___ Tn5250j-general mailing list Tn5250j-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/tn5250j-general -- Simplify data backup and recovery for your virtual environment with vRanger. Installation's a snap, and flexible recovery options mean your data is safe, secure and there when you need it. Discover what all the cheering's about. Get your free trial download today. http://p.sf.net/sfu/quest-dev2dev2 ___ Tn5250j-general mailing list Tn5250j-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/tn5250j-general
Re: [Tn5250j-general] Immediate disconnect
Martin, I build from Subversion source. Last build was about two weeks ago. I just ran svn update and I see there are some changes for revision 1156. I will try to rebuild the jar and try connecting again. Still, is there a way to increase debug output? Otherwise, I will try to step into the debugger. Thanks, Arpe -Original Message- From: Martin W. Kirst [mailto:m...@bitkings.de] Sent: Friday, June 03, 2011 5:16 PM To: tn5250j-general@lists.sourceforge.net Subject: Re: [Tn5250j-general] Immediate disconnect Hi Arpe, what version of Tn5250j do you use? tn5250j-0.6.3-jse6 OR tn5250j-0.6.3 ? Regards Martin Hi, I am now a regular user of TN5250J. I have a problem today where after connecting to one server, I am immediately disconnected. I tried to connect and login using vanilla telnet, then RUMBA. Both are OK. I am OK to connect to other servers. Below is the output. I need to provide more information to debug. How can I do this? Thanks, Arpe java -jar lib\tn5250j.jar JKCSPAPA.svr.apac.jpmchase.net -p 23 -e -t -spp 1080 -d -dn JA BootStrapper listening WARN [org.tn5250j.My5250] Information Message: Can not find scripting support files, scripting will not be available: Failed to load interpreter drivers java.lang.NoClassDefFoundError: org/python/core/PyException java.lang.NullPointerException at org.tn5250j.Gui5250Frame.determineTabName(Unknown Source) at org.tn5250j.Gui5250Frame.setSessionTitle(Unknown Source) at org.tn5250j.Gui5250Frame.jbInit(Unknown Source) at org.tn5250j.Gui5250Frame.init(Unknown Source) at org.tn5250j.My5250.newView(Unknown Source) at org.tn5250j.My5250.init(Unknown Source) at org.tn5250j.My5250.main(Unknown Source) INFO [org.tn5250j.framework.common.SessionManager] New session Manager initialized INFO [org.tn5250j.framework.Tn5250jController] plugin directory is: C:\eclipse\workspace2\JPM-AS400\ext WARN [org.tn5250j.framework.Tn5250jController] Plugin path 'C:\eclipse\workspace2\JPM-AS400\ext' does not exist. No plugins will be loaded. INFO [org.tn5250j.framework.Tn5250jController] Tn5250j plugin manager created INFO [org.tn5250j.framework.Tn5250jController] Tn5250j plugin manager started INFO [org.tn5250j.framework.tn5250.tnvt] new session - JKCSPAPA.svr.apac.jpmchase.net INFO [org.tn5250j.framework.transport.SocketConnector] Creating Plain Socket WARN [org.tn5250j.framework.tn5250.tnvt] connect() Connection closed. INFO [org.tn5250j.framework.tn5250.tnvt] Closing socket INFO [org.tn5250j.My5250] session found and closing down INFO [org.tn5250j.Gui5250Frame] session found and closing down 0 INFO [org.tn5250j.My5250] disconnecting socket INFO [org.tn5250j.My5250] socket closed INFO [org.tn5250j.My5250] view settings -s JKCSPAPA.svr.apac.jpmchase.net This email is confidential and subject to important disclaimers and conditions including on offers for the purchase or sale of securities, accuracy and completeness of information, viruses, confidentiality, legal privilege, and legal entity disclaimers, available at http://www.jpmorgan.com/pages/disclosures/email. -- Simplify data backup and recovery for your virtual environment with vRanger. Installation's a snap, and flexible recovery options mean your data is safe, secure and there when you need it. Discover what all the cheering's about. Get your free trial download today. http://p.sf.net/sfu/quest-dev2dev2 ___ Tn5250j-general mailing list Tn5250j-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/tn5250j-general -- Simplify data backup and recovery for your virtual environment with vRanger. Installation's a snap, and flexible recovery options mean your data is safe, secure and there when you need it. Discover what all the cheering's about. Get your free trial download today. http://p.sf.net/sfu/quest-dev2dev2 ___ Tn5250j-general mailing list Tn5250j-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/tn5250j-general -- Simplify data backup and recovery for your virtual environment with vRanger. Installation's a snap, and flexible recovery options mean your data is safe, secure and there when you need it. Discover what all the cheering's about. Get your free trial download today. http://p.sf.net/sfu/quest-dev2dev2 ___ Tn5250j-general mailing list Tn5250j-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/tn5250j-general