Mpq101 is a RapidIO development board in AMC form factor, featuring MPC8548
processor, 512MB of hardwired DDR2 RAM, 128MB of hardwired NAND flash
memory, real time clock and additional serial EEPROM on i2c bus (enabled).
USB controller is available, but not presently enabled.
Additional board
Dear Dirk Eibach,
Dear Wolfgang,
...
#define BASE_WIDTH 32
@@ -38,12 +44,18 @@
enum {
REG_CONTROL = 0x0010,
REG_MPC3W_CONTROL = 0x001a,
+ REG_EXT_INTERRUPT = 0x001c,
+ REG_EXT_INTERRUPT_ENABLE = 0x001e,
+ REG_IIC_WRITE_MAILBOX = 0x0030,
+
Documented is CONFIG_CMD_SHA1, through confusion in the source
CONFIG_CMD_SHA1 and CONFIG_CMD_SHA1SUM has to be used to enable
sha1sum.
Fix both, the documentation and the source, so that only
CONFIG_CMD_SHA1SUM is needed to enable the command sha1sum.
Signed-off-by: Alexander Holler
SH7757 has SPI module. This patch supports it.
Signed-off-by: Yoshihiro Shimoda yoshihiro.shimoda...@renesas.com
---
about v2:
- add prefix of SH_ to some defines.
- modify spi_cs_is_valid()
drivers/spi/Makefile |1 +
drivers/spi/sh_spi.c | 301
SH7757 has ETHER and GETHER. This patch supports EHTER only.
Signed-off-by: Yoshihiro Shimoda yoshihiro.shimoda...@renesas.com
---
about v2:
- remove unnecessary variable in sh_eth_config().
drivers/net/sh_eth.c | 37 +-
drivers/net/sh_eth.h | 53
The R0P7757LC0030RL board has SH7757, 256MB DDR3-SDRAM, SPI ROM,
Ethernet, and more.
This patch supports the following functions:
- 256MB DDR3-SDRAM
- SPI ROM
- Ethernet
Signed-off-by: Yoshihiro Shimoda yoshihiro.shimoda...@renesas.com
---
about v2:
- remove unnecessary comment in
Hello,
Am 17.01.2011 23:28, schrieb Wolfgang Denk:
Anyway, I would found it a nice feature, at startup or when running the
version command, but both aren't a must.
I think it would be a really useful extension to the version command.
Looking forwad to seeing your patch.
Maybe if someone
Dear Aneesh V,
In message 4d3525cd.8090...@ti.com you wrote:
+struct __attribute__ ((__packed__)) emu_hal_params {
+u32 num_params;
+u32 param1;
+};
Why exactly do we need the __attribute__ ((__packed__)) here?
Because a pointer to it has to be passed to ROM code
Dear Stefano Babic,
In message 4d353d72.10...@denx.de you wrote:
it is too late, it was already pulled. We need now a patch on top of
this. Jason, can you check Wolfgang's comments and send a patch to fix
the issues he reported ?
It is not too late. I will not pull this into mainline as
Dear Yoshihiro Shimoda,
In message 4d33c089.8040...@renesas.com you wrote:
SH7757 has SPI module. This patch supports it.
Signed-off-by: Yoshihiro Shimoda yoshihiro.shimoda...@renesas.com
---
drivers/spi/Makefile |1 +
drivers/spi/sh_spi.c | 295
Dear Yoshihiro Shimoda,
In message 4d33c078.3090...@renesas.com you wrote:
Fix the problem which cannot build the U-boot, if we only set
the CONFIG_ENV_IS_IN_SPI_FLASH.
Signed-off-by: Yoshihiro Shimoda yoshihiro.shimoda...@renesas.com
---
include/environment.h |1 +
1 files changed,
Dear Nobuhiro Iwamatsu,
In message 20110117130531.gd13...@chimagu.nigauri.org you wrote:
On Mon, Jan 17, 2011 at 01:08:58PM +0900, Yoshihiro Shimoda wrote:
Some CPU needs cache handling. So this patch add the config of
CONFIG_SH_ETHER_CACHE_WRITEBACK, and it calls wback function.
Dear Yoshihiro Shimoda,
In message 4d33c0da.4000...@renesas.com you wrote:
Some CPU needs cache handling. So this patch add the config of
CONFIG_SH_ETHER_CACHE_WRITEBACK, and it calls wback function.
Signed-off-by: Yoshihiro Shimoda yoshihiro.shimoda...@renesas.com
---
Dear Nobuhiro Iwamatsu,
In message 20110117125040.gb13...@chimagu.nigauri.org you wrote:
On Mon, Jan 17, 2011 at 01:11:08PM +0900, Yoshihiro Shimoda wrote:
The R0P7757LC0030RL board has SH7757, 256MB DDR3-SDRAM, SPI ROM,
Ethernet, and more.
This patch supports the following functions:
Dear Yoshihiro Shimoda,
In message 4d3547b8.6020...@renesas.com you wrote:
Is this nesseary?
The #sinclude is not nessesary. I will remove it.
However the LDSCRIPT is necessary on this board because
the LSI needs the top of address when booting.
Please ditch the whole config.mk file and
(forgot the subject ;)
- k
On Jan 17, 2011, at 10:45 PM, Kumar Gala wrote:
The following changes since commit e1ccf97c5d7651664d37c0c5aa243874b8851b2d:
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2011-01-17
20:31:46 +0100)
are available in the git repository at:
Dear Stefano Babic,
In message 4d34744b.2030...@denx.de you wrote:
I have not understood this point. The link address CONFIG_SYS_TEXT_BASE
is always set in the config.mk file, because it is needed by the linker
process, and it is not set in the configuration file (I think you mean
On Jan 18, 2011, at 2:03 AM, Alex Dubov wrote:
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 16 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ (16 20) /*
Dear Eibach, Dirk,
In message 48d3d52125c49b43ae880038e2e5314bb5b...@srv101.gdsys.de you wrote:
So, if you insist, I will convert our code to C struct based access.
Please do.
Maybe you could point me to a nice clean implementation in u-boot, so I
can use the semantics you prefer (e.g.
Dear Yoshihiro Shimoda,
In message 4d355516.6020...@renesas.com you wrote:
SH7757 has SPI module. This patch supports it.
Signed-off-by: Yoshihiro Shimoda yoshihiro.shimoda...@renesas.com
---
about v2:
- add prefix of SH_ to some defines.
- modify spi_cs_is_valid()
On 01/18/2011 10:40 AM, Wolfgang Denk wrote:
No, you are wrong. CONFIG_SYS_TEXT_BASE is always set in the
configuration file, only a few files still have it in config.mk -
these files need to be cleand up, and ideally config.mk should be
ditched.
I see, understood. I will drop config.mk.
On 01/18/2011 10:24 AM, Wolfgang Denk wrote:
It is not too late. I will not pull this into mainline as is. You
can rebase your tree.
No problem on my side. Albert should also drop this patch, because it is
already merged into u-boot-arm. I will wait for updates from Jason.
Best regards,
On 01/16/2011 07:17 PM, Anatolij Gustschin wrote:
We need to shift only one time in each cycle in the swapping loop
for unaligned tx case. Currently two byte shift operations are
performed in each loop cycle causing zero gaps in the transmited
data, so not all data scheduled for transmition is
From: Anatolij Gustschin ag...@denx.de
The MXC SPI driver didn't calculate the SPI clock up to
now and just highest possible divider 512 for DATA
RATE in the control register. This results in very low
transfer rates.
The patch adds code to calculate and setup the SPI clock
frequency for
Dear Daniel Gorsulowski,
Hello Albert,
Albert ARIBAUD wrote:
Le 18/01/2011 10:27, Daniel Gorsulowski a écrit :
Hello again!
Hi Daniel,
One month ago, I asked you for help (see message below), but got no
answer.
Sorry about that. Last quarter of 2010 was rather busy for me.
Do you
Add Intel E1000 82574L PCIe card support. Test on MPC8544DS
and MPC8572 board.
Add the missing contact information for future support.
Signed-off-by: Roy Zang tie-fei.z...@freescale.com
---
based on commit e1ccf97c5d7651664d37c0c5aa243874b8851b2d
drivers/net/e1000.c | 35
From: Holger Brunck holger.bru...@keymile.com
The MPC852 based mgsuvd and kmsupx4 boards from keymile
were initially ported but later on not developed further. So
the respective files were removed to avoid unneeded merging
and maintenance.
Signed-off-by: Holger Brunck holger.bru...@keymile.com
Hi Marcel,
Marcel wrote:
I have already reduced the code quite far. Basically all dma related stuff is
gone.
According to your first message in this thread I suppose that you are
using atmel_usba_udc driver. Am I right?
Looks like it's able to use PIO mode transfer (I mean linux driver).
Hi Marcel,
In addition, did you enable CONFIG_USB_GADGET_DUALSPEED option in your
u-boot config file?
With best regards,
Vitaly.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi
I am working with a TI Davinci DM365 and would love to use the boot count
limit feature for a product that we are working on but the docs state it is
only supported by Power Architecture processors. Could someone please
explain why this is and how it works as I will need to either find an
Dear Sean Preston,
In message 008901cbb715$9a371b10$cea55130$@pfk.co.za you wrote:
I am working with a TI Davinci DM365 and would love to use the boot count
limit feature for a product that we are working on but the docs state it is
only supported by Power Architecture processors. Could
Hi, Wolfgang and Stefano,
2011/1/18 Wolfgang Denk w...@denx.de:
Dear Stefano Babic,
In message 4d353d72.10...@denx.de you wrote:
it is too late, it was already pulled. We need now a patch on top of
this. Jason, can you check Wolfgang's comments and send a patch to fix
the issues he
Dear Jason Liu,
In message AANLkTingvggSztUuHQCzrxaOn04ZO=k07xfczkfci...@mail.gmail.com you
wrote:
Do I need send out the new version patch for imximage to address
Wolfgang's comments
or send out the whole patchset(8patches) include the new version patch?
What's the process for it?
If
Hi, Wolfgang,
2011/1/18 Wolfgang Denk w...@denx.de:
Dear Jason Liu,
In message AANLkTingvggSztUuHQCzrxaOn04ZO=k07xfczkfci...@mail.gmail.com you
wrote:
Do I need send out the new version patch for imximage to address
Wolfgang's comments
or send out the whole patchset(8patches) include
Am 18.01.2011 15:59, schrieb Jason Liu:
Hi Jason,
This is the only one patch from the whole pathset(8patches) need get updated
So, I just resubmit it with one newer version for only this patch, is it ok?
Yes, I agree. The other patches have received formal ACKs or there are
no more comments
Hello.
Stefano Babic wrote:
From: Anatolij Gustschin ag...@denx.de
The MXC SPI driver didn't calculate the SPI clock up to
now and just highest possible divider 512 for DATA
^
I think used shouldn't have been ommitted here.
RATE in the control register. This results in
In a header define register fields we have something like:
+#define CSOR_NAND_TRHZ_MASK 0x001C /* Time for Read Enable
+High to Output High
+Impedance */
Is this multiple line
On Jan 18, 2011, at 5:55 AM, Roy Zang wrote:
Add Intel E1000 82574L PCIe card support. Test on MPC8544DS
and MPC8572 board.
Add the missing contact information for future support.
Signed-off-by: Roy Zang tie-fei.z...@freescale.com
---
based on commit
When an elf section is already at the right position (e.g. after image
decompression by bootm) there is no need to copy it.
Signed-off-by: Matthias Weisser weiss...@arcor.de
---
common/cmd_elf.c |7 ---
1 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/common/cmd_elf.c
Anyway, I would found it a nice feature, at startup or when running the
version command, but both aren't a must.
I think it would be a really useful extension to the version command.
Looking forwad to seeing your patch.
Maybe if someone could feed me with what to use for the version.
Am 18.01.2011 17:20, schrieb Peter Tyser:
Anyway, I would found it a nice feature, at startup or when running the
version command, but both aren't a must.
I think it would be a really useful extension to the version command.
Looking forwad to seeing your patch.
Maybe if someone could feed
Added to: git://git.denx.de/u-boot-nios.git 'next'
Thank you,
--Scott
Thomas Chou wrote:
Added this for mmc_spi driver. Though altera spi core does not
support programmable speed. It is fixed when configured in
sopc-builder.
Signed-off-by: Thomas Chou tho...@wytron.com.tw
---
Added to: git://git.denx.de/u-boot-nios.git 'next'
Thank you,
--Scott
Thomas Chou wrote:
This is consistent with nios2-linux. And resolved the warning,
cmd_nvedit.c: In function `do_env_export':
cmd_nvedit.c:660: warning: size_t format, ssize_t arg (arg 3)
Signed-off-by: Thomas Chou
Added to: git://git.denx.de/u-boot-nios.git 'next'
Thank you,
--Scott
Thomas Chou wrote:
Signed-off-by: Thomas Chou tho...@wytron.com.tw
---
arch/nios2/include/asm/gpio.h|6 ++
board/altera/nios2-generic/custom_fpga.h |1 +
board/altera/nios2-generic/gpio.c
Added to: git://git.denx.de/u-boot-nios.git 'next'
Thank you,
--Scott
Thomas Chou wrote:
Signed-off-by: Thomas Chou tho...@wytron.com.tw
---
arch/nios2/include/asm/gpio.h |6 ++
board/altera/nios2-generic/gpio.c |5 +
2 files changed, 11 insertions(+), 0 deletions(-)
On Tue, 18 Jan 2011 01:18:34 +0100
Joakim Tjernlund joakim.tjernl...@transmode.se wrote:
How do you think a solution for all boards would look like?
The only other method is can think of is some MMU trickery and
I don't even see how you can make that work on all boards and
You don't need to
Define voltages configurable on SWx buck switchers.
Signed-off-by: Marek Vasut marek.va...@gmail.com
---
include/mc13892.h | 35 +++
1 files changed, 35 insertions(+), 0 deletions(-)
diff --git a/include/mc13892.h b/include/mc13892.h
index 61c3e6e..6d86e55
Signed-off-by: Marek Vasut marek.va...@gmail.com
---
board/freescale/mx51evk/mx51evk.c |7 ---
1 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/board/freescale/mx51evk/mx51evk.c
b/board/freescale/mx51evk/mx51evk.c
index 2160d5a..bcf1934 100644
---
Supported:
MMC
IDE
PMIC
SPI flash
LEDs
I can boot the kernel supplied by freescale/genesi with this from MMC card
and/or PATA disk.
Signed-off-by: Marek Vasut marek.va...@gmail.com
---
v3: Use SWx definitions as proposed by Stefano
MAINTAINERS|1 +
board/efikamx/Makefile
On Thursday 13 January 2011 18:46:02 Stefano Babic wrote:
On 01/13/2011 06:15 PM, Marek Vasut wrote:
+ mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_GPIO);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, PAD_CTL_100K_PU);
+ mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_NANDF_RB3),
On Sunday 16 January 2011 16:21:34 Stefano Babic wrote:
On 01/13/2011 06:27 PM, Marek Vasut wrote:
As for the PMIC, other boards don't use any #defines for those constants
either, which obviously doens't mean it's right.
Well, this is not true. You use in yourd board a lot of these
Scott Wood scottw...@freescale.com wrote on 2011/01/18 18:27:49:
On Tue, 18 Jan 2011 01:18:34 +0100
Joakim Tjernlund joakim.tjernl...@transmode.se wrote:
How do you think a solution for all boards would look like?
The only other method is can think of is some MMU trickery and
I don't even
Dear Jason Liu,
In message aanlktiny2u9cvfwjurnmoewazqxlceyqlpw__dgup...@mail.gmail.com you
wrote:
...
static table_entry_t imximage_cmds[] = {
+ {CMD_IMAGE_VERSION, IMAGE_VERSION,i mage version, },
{CMD_BOOT_FROM, BOOT_FROM, boot command, },
Dear Kumar Gala,
In message 3d755410-9073-43de-b772-d5649ed96...@kernel.crashing.org you wrote:
In a header define register fields we have something like:
+#define CSOR_NAND_TRHZ_MASK0x001C /* Time for Read
Enable
+
Dear Alexander Holler,
In message 4d35c836.3020...@ahsoftware.de you wrote:
@@ -416,6 +416,8 @@ $(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin
$(VERSION_FILE):
@( printf '#define U_BOOT_VERSION U-Boot %s%s\n'
$(U_BOOT_VERSION) \
'$(shell
Dear Joakim Tjernlund,
In message
of287114d8.013b6e51-onc125781c.00667dcd-c125781c.00673...@transmode.se you
wrote:
You don't need to make the MMU trick work on all boards, just your board
(or cpu family), because it wouldn't be imposing anything on
the rest of the system. Do we
Dear Marek Vasut,
In message 201101182032.33444.marek.va...@gmail.com you wrote:
+/***
***
I have not checked before, but this is not the coding style for
multiline comments.
Well it's more of a section
On Tue, 18 Jan 2011 21:06:34 +0100
Wolfgang Denk w...@denx.de wrote:
Dear Joakim Tjernlund,
In message
of287114d8.013b6e51-onc125781c.00667dcd-c125781c.00673...@transmode.se you
wrote:
boards which I don't think is possible. I do think my approach comes
closest though.
I did try
Scott Wood scottw...@freescale.com wrote on 2011/01/18 21:24:16:
On Tue, 18 Jan 2011 21:06:34 +0100
Wolfgang Denk w...@denx.de wrote:
Dear Joakim Tjernlund,
In message
of287114d8.013b6e51-onc125781c.00667dcd-c125781c.00673...@transmode.se
you wrote:
boards which I don't think is
This patch add the MX53 boot image support.
This patch has been tested on Freescale MX53EVK board
and MX51EVK board.
Signed-off-by: Jason Liu r64...@freescale.com
---
Changes for v2:
- Address the following comments from Stefano,
- Get rid of #ifdef in the imximage.h and .c file and use
Hi, Marek,
2011/1/19 Marek Vasut marek.va...@gmail.com:
Define voltages configurable on SWx buck switchers.
Signed-off-by: Marek Vasut marek.va...@gmail.com
---
include/mc13892.h | 35 +++
1 files changed, 35 insertions(+), 0 deletions(-)
diff --git
Wolfgang Denk w...@denx.de wrote on 2011/01/18 21:06:34:
Dear Joakim Tjernlund,
In message
of287114d8.013b6e51-onc125781c.00667dcd-c125781c.00673...@transmode.se you
wrote:
You don't need to make the MMU trick work on all boards, just your board
(or cpu family), because it wouldn't
On Tuesday, January 18, 2011 01:15:25 am Marcel wrote:
Hi,
ether.c contains the following code :
req-buf = (u8 *) NetRxPackets[0];
req-length = size;
req-complete = rx_complete;
retval = usb_ep_queue(dev-out_ep, req, gfp_flags);
My USB controller code that
Dear Scott Wood,
In message 20110118142416.5892c...@udp111988uds.am.freescale.net you wrote:
If we are talking about _all_ boards we have to keep a wider view.
For example, on MPC8xx there are not BATs. Not to mention other
architectures.
I don't see why MPC8xx's MMU couldn't be used
Dear Joakim Tjernlund,
In message
ofbbe91305.b19350d9-onc125781c.007192fc-c125781c.00742...@transmode.se you
wrote:
Ah, finally you make sense to me. I actually tested this with mainline
on my board so it is not completely untested in mainline.
As your board itself is not in mainline this
Dear Marcel,
In message 201101182208.33651.korg...@home.nl you wrote:
Anyone have an idea how NetRxPackets is allocated ?
Nobody ?
Well,you're supposed to do some basic code reading yourself.
req-buf = (u8 *) NetRxPackets[0];
This is returning an non existing buffer for some reason
On Tue, 18 Jan 2011 21:39:23 +0100
Joakim Tjernlund joakim.tjernl...@transmode.se wrote:
Scott Wood scottw...@freescale.com wrote on 2011/01/18 21:24:16:
I don't see why MPC8xx's MMU couldn't be used for this, although it
might be a tight fit if you want to get everything into the pinned TLB
Dear Baidu Boy,
In message aanlktikznb5ox6-wajjvp1g7kufjygq+4iss2zkrc...@mail.gmail.com you
wrote:
This patch is still in new state. Please help to check.
I think it is really an potential issue without this patch.
All your patches require changes. See previous messages about the
use of a
Dear Baidu Boy,
In message 01cbb189$ddf50790$6401a8c0@LENOVOE5CA6843 you wrote:
The original CS0 OR configuration sets the reserved field.
This patch is to correct the setting.
Signed-off-by: Baidu Boy liucai@gmail.com
NAK. Real name required.
Best regards,
Wolfgang Denk
--
Dear Po-Yu Chuang,
In message aanlktint_7+g+fp2cv5qjb3kqtnbf15y0mm7_s6hb...@mail.gmail.com you
wrote:
From: Po-Yu Chuang ratb...@faraday-tech.com
timer.c used static data and are called before relocation.
Move all static variables into global_data structure. Also cleanup
timer.c from
Dear Lei Wen,
In message 1294754710-7834-2-git-send-email-lei...@marvell.com you wrote:
Since there are lots of difference between kirkwood and armada series,
it is better to seperate them but still keep the most common file
shared by all marvell platform in the mv-common configure file.
Dear Lei Wen,
In message 1294754710-7834-3-git-send-email-lei...@marvell.com you wrote:
Pantheon Family processors are highly integrated SoCs
based on Sheeva_88SV331x-v5 PJ1 cpu core.
Ref:
http://www.marvell.com/products/processors/communications/marvell_pantheon_910_920_pb.pdf
...
+/* For
Dear Lei Wen,
In message 1294754710-7834-5-git-send-email-lei...@marvell.com you wrote:
This patch adds the support MFP support for Marvell PANTHEON SoCs
...
+/*
+ * Frequently used MFP Configuration macros for all PANTHEON family of
+SoCs
^^
+ *
+ * offset, pull,pF, drv,dF,
Dear seedshope,
In message 1294757545-4771-4-git-send-email-bocui...@gmail.com you wrote:
Add some relocation symbols to u-boot.lds and disable LED functions
in start.s to support nand_spl.
Signed-off-by: seedshope bocui...@gmail.com
Please re-split yourpatches. The changes to
Wolfgang Denk w...@denx.de wrote on 2011/01/18 22:25:04:
Dear Joakim Tjernlund,
In message
ofbbe91305.b19350d9-onc125781c.007192fc-c125781c.00742...@transmode.se you
wrote:
Ah, finally you make sense to me. I actually tested this with mainline
on my board so it is not completely
Dear Kumar Gala,
In message 1294604972-24751-1-git-send-email-ga...@kernel.crashing.org you
wrote:
There are several users of the hwconfig APIs (8xxx DDR) before we have
the environment properly setup. This causes issues because of the
numerous ways the environment might be accessed because
Dear holger.bru...@keymile.com,
In message 1295354730-7947-1-git-send-email-holger.bru...@keymile.com you
wrote:
From: Holger Brunck holger.bru...@keymile.com
The MPC852 based mgsuvd and kmsupx4 boards from keymile
were initially ported but later on not developed further. So
the respective
Dear Roy Zang,
In message 1295351719-2687-1-git-send-email-tie-fei.z...@freescale.com you
wrote:
Add Intel E1000 82574L PCIe card support. Test on MPC8544DS
and MPC8572 board.
Add the missing contact information for future support.
Signed-off-by: Roy Zang tie-fei.z...@freescale.com
---
Dear Heiko Schocher,
In message 1294903500-2018-1-git-send-email...@denx.de you wrote:
difference to previous board version:
- M29W128GH flash from Numonyx
- SDRAM ISSI IS45S16800 (Option A2 105°C)
- rev5 uses RTC RV-3029-C2
- update cs0 and cs1 baseaddr and length
depending on the
Dear Heiko Schocher,
In message 1294816806-32614-1-git-send-email...@denx.de you wrote:
Signed-off-by: Heiko Schocher h...@denx.de
---
drivers/rtc/Makefile |1 +
drivers/rtc/rv3029.c | 124
++
2 files changed, 125 insertions(+), 0
Hi Wolfgang,
Nobody ?
Well,you're supposed to do some basic code reading yourself.
Of course. It's always the idea to post a question after reading for some
time. It either means I don't understand the code, the code really doesn't
work or I did miss the most important part in the
Dear Thomas Chou,
In message 1294709900-2764-1-git-send-email-tho...@wytron.com.tw you wrote:
Crc7 is used to compute mmc spi command packet checksum.
Copy from linux-2.6 lib/crc7.c include/linux/crc7.h
commit ad241528c4919505afccb022acbab3eeb0db4d80
Signed-off-by: Thomas Chou
On Jan 18, 2011, at 4:26 PM, Wolfgang Denk wrote:
Dear Kumar Gala,
In message 1294604972-24751-1-git-send-email-ga...@kernel.crashing.org you
wrote:
There are several users of the hwconfig APIs (8xxx DDR) before we have
the environment properly setup. This causes issues because of the
On Jan 18, 2011, at 4:33 PM, Wolfgang Denk wrote:
Dear Roy Zang,
In message 1295351719-2687-1-git-send-email-tie-fei.z...@freescale.com you
wrote:
Add Intel E1000 82574L PCIe card support. Test on MPC8544DS
and MPC8572 board.
Add the missing contact information for future support.
Dear Thomas Chou,
In message 1293232433-2985-1-git-send-email-tho...@wytron.com.tw you wrote:
This func helps mmc_spi driver set correct speed for mmc/sd, as
mmc card needs 400KHz clock for spi mode initialization.
Signed-off-by: Thomas Chou tho...@wytron.com.tw
---
v2 remove weak func as
Dear Joakim Tjernlund,
In message
ofa95d19c0.58c4cbc0-onc125781c.00785fed-c125781c.0079e...@transmode.se you
wrote:
Such testing can be done anywhere, in some test branch. I don't think
mainline is the right place for such an intrusive and experiemental
feature.
Do you have such a
There are several users of the hwconfig APIs (8xxx DDR) before we have
the environment properly setup. This causes issues because of the
numerous ways the environment might be accessed because of the
non-volatile memory it might be stored in. Additionally the access
might be so early that memory
On Jan 18, 2011, at 4:40 PM, Kumar Gala wrote:
If we already know that there is no hwconfig setting in the
environment, why do we then need to go through all the
hwconfig_sub_f() and hwconfig_subarg_cmp_f() calls below?
Can we not short-cut all these?
Short cut how?
while we could
Dear Marcel,
Well,you're supposed to do some basic code reading yourself.
Of course. It's always the idea to post a question after reading for some
time. It either means I don't understand the code, the code really doesn't
work or I did miss the most important part in the documents. I guess
Dear Kumar Gala,
In message 7de856f6-e8eb-43bb-b641-60d84e33a...@kernel.crashing.org you wrote:
+ * Authors: Roy Zang tie-fei.z...@freescale.com
+ * - Add PCI Express card support in Jul. 2009
+ */
If you really insist on adding this, thenmove it up into the header.
What what
Dear Yanjun Yang,
In message AANLkTi=YN=ADLKGTmsoFGBG5ZuaO=ashhe_3o5kqv...@mail.gmail.com you
wrote:
The lan91c96_detect_chip routine is not correct according
to the manual.
Signed-off-by: YanJun Yang yangyj...@gmail.com
---
Changes for v2:
- Avoid line wraps and ensure tabs
- Don't
Dear Peter Tyser,
In message 1293581525-18073-1-git-send-email-pty...@xes-inc.com you wrote:
There's no compelling reason to have the output on bootup or the
flinfo command print flash in uppercase, so use the proper case
where appropriate.
Signed-off-by: Peter Tyser pty...@xes-inc.com
---
Dear Peter Tyser,
In message 1293745676-1557-1-git-send-email-pty...@xes-inc.com you wrote:
When a flash partition was positioned at the very top of a 32-bit memory
map (eg located at 0xf800 with a size of 0x800)
get_part_sector_size_nor() would incorrectly calculate the partition's
Dear =?UTF-8?q?Lo=C3=AFc=20Minier?=,
In message 1294104756-3338-1-git-send-email-loic.min...@linaro.org you wrote:
Signed-off-by: Loïc Minier loic.min...@linaro.org
---
tools/kwbimage.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
Applied, thanks.
Best regards,
Wolfgang
Dear =?UTF-8?q?Lo=C3=AFc=20Minier?=,
In message 1294104756-3338-2-git-send-email-loic.min...@linaro.org you wrote:
By default, - chars are interpreted as hyphens (U+2010) by groff, not
as minus signs (U+002D). Since options to programs use minus signs
(U+002D), this means for example in UTF-8
Dear Mike Frysinger,
In message 1294638366-32527-1-git-send-email-vap...@gentoo.org you wrote:
Signed-off-by: Mike Frysinger vap...@gentoo.org
---
common/cmd_nvedit.c |8
include/config_cmd_defaults.h |2 ++
2 files changed, 10 insertions(+), 0 deletions(-)
Signed-off-by: Marek Vasut marek.va...@gmail.com
---
board/freescale/mx51evk/mx51evk.c |7 ---
1 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/board/freescale/mx51evk/mx51evk.c
b/board/freescale/mx51evk/mx51evk.c
index 2160d5a..bcf1934 100644
---
Define voltages configurable on SWx buck switchers.
Signed-off-by: Marek Vasut marek.va...@gmail.com
---
v2: Add note about SWxHI
include/mc13892.h | 39 +++
1 files changed, 39 insertions(+), 0 deletions(-)
diff --git a/include/mc13892.h
Supported:
MMC
IDE
PMIC
SPI flash
LEDs
I can boot the kernel supplied by freescale/genesi with this from MMC card
and/or PATA disk.
Signed-off-by: Marek Vasut marek.va...@gmail.com
---
v4:
* Remove NOTE: if (is_soc_rev(CHIP_REV_2_0) = 0) comment
* Fix bold multiline comments
MAINTAINERS
After years of unsuccessful research I've finally shamelessly stolen other
peoples intellectual properties to present the all-new and world-changing
updated version command:
-
U-Boot version
U-Boot 2010.12-00014-g7435056-dirty (Jan 18 2011 - 23:19:38)
MyBoard
gcc (GCC) 0.42 (Distro foobar)
GNU ld
1 - 100 of 118 matches
Mail list logo
