On 24/11/2011 07:57, Tapani Utriainen wrote:
On Wed, 23 Nov 2011 10:26:54 +0100
Stefano Babic sba...@denx.de wrote:
Stefano,
Hi Tapani,
Some comments regarding your u-boot patch for TAM3517/Twister.
Thanks - please add always the mailing list as CC, we are currently
review the patches,
On 23/11/2011 21:59, Marek Vasut wrote:
Some functions were internal to the apbh dma driver, so annotate them static.
Some of the functions weren't used at all so drop them. This makes the U-Boot
binary smaller by about 1500 bytes.
Signed-off-by: Marek Vasut marek.va...@gmail.com
Cc:
Sorry guys; I'm bailing.
Out.
On Nov 24, 2011, at 1:15, Marek Vasut wrote:
This patch adds a validity check for GPIO pins to prevent clobbering
reserved bit or even registers, per suggestion of Marek Vasut.
Please note:
1. gpio_request no longer checks validity. Pin validity must be
On 23/11/2011 17:21, Wolfgang Denk wrote:
+#define CONFIG_CMD_I2C /* I2C serial bus support */
+#define CONFIG_CMD_MMC /* MMC support */
+#define CONFIG_CMD_FAT /* FAT support */
+#define CONFIG_CMD_NAND
As per new conventions Samsung SoC's are named as Exynos.
Cortex-A9 based Soc's are named as exynos4. s5pc2xx is cortex-A9
based, hence renamed to exynos4. This is done as per kernel
naming convetions.
Similerly s5pc210 is now exynos4210. Hence S5PC210/s5pc210
suffix/prefix has been renamed to
2011/11/24 Marek Vasut marek.va...@gmail.com
On 11/12/2011 06:45 PM, Jana Rapava wrote:
This commit adds USB support for EfikaMX and EfikaSB.
Signed-off-by: Jana Rapava ferma...@gmail.com
Signed-off-by: Marek Vasut marek.va...@gmail.com
Cc: Remy Bohmer li...@bohmer.net
Cc:
Dear Marek Vasut,
In message 20240344.15295.marek.va...@gmail.com you wrote:
Someone should step up and make it consistent then ;-)
There is no inconsistency, only misunderstanding.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB
Dear David Lynch Jr.,
In message 1322109868.27713.59.camel@hp-dv9500 you wrote:
I am bringing u-boot-2009.03-rc1 up on an MPC8536 target, and I am
having some problems reading DDR, suggestions would be greatly
appreciated.
This code is more than 2.5 years old. Consider it obsolete and
Dear Jason Hui,
In message cafq4atqfq7ykkwa5fbbe16ewt95ubnkk1bjtppqw8adtuwz...@mail.gmail.com
you wrote:
Then what's the rule that we must need use CONFIG_SYS_ other than
CONFIG_option?
You yourself quoted the relevant part of the README before in this
thread. Just re-read your own posting
Dear Igor Grinberg,
In message 4ecde8c3.2050...@compulab.co.il you wrote:
By that logic _all_ commits in the Linux kernel must have the SoB of
Linus Torvalds. Do they?
No they should not.
As for my understanding, the delivery path ends with the repository
from which the pull process
On Thu, Nov 24, 2011 at 7:41 PM, Wolfgang Denk w...@denx.de wrote:
Dear Jason Hui,
In message
cafq4atqfq7ykkwa5fbbe16ewt95ubnkk1bjtppqw8adtuwz...@mail.gmail.com you
wrote:
Then what's the rule that we must need use CONFIG_SYS_ other than
CONFIG_option?
You yourself quoted the relevant
Dear Igor Grinberg,
In message 4ecdeae4.5030...@compulab.co.il you wrote:
For my understanding, the delivery ends with *unique commit id*
in some repository, which then can get pulled, but has history intact.
But depending on the process, the initial commit id may or may not be
the final one.
Dear Graeme,
In message CALButCLDGEiC9vVnnXg0vC60SU=wizqtcx_pgpyfklopeyk...@mail.gmail.com
you wrote:
That is, the repository that has the *commit id* first set
and then it is not changed, because pull requests keep the
history intact. This is the reason, why Linus Torvalds do not
sign
Dear Stefano Babic,
In message 4ecdfab9.70...@denx.de you wrote:
In the default settings I put a basic environment, using the same
variables that are already used on several boards - I know there is
neither standard nor rules for a standard environment in U-Boot, but I
find nice if different
Dear Stefano Babic,
In message 4ece095d.4040...@denx.de you wrote:
+#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
+#undef CONFIG_CMD_IMI /* iminfo */
+#undef CONFIG_CMD_IMLS/* List all found images*/
Is there
Dear Jason Hui,
In message CAFQ4atRGwSxiw+mik8wSMMUVW4M=n9ws55ppd1ifhu-e1aj...@mail.gmail.com
you wrote:
I'm just get confused. It seems from you that we can both use:
CONFIG_option and CONFIG_SYS_ in this patch? right?
It's one of those boarder cases. But given that we don't actually set
On 11/24/11 13:51, Wolfgang Denk wrote:
Dear Igor Grinberg,
In message 4ecdeae4.5030...@compulab.co.il you wrote:
For my understanding, the delivery ends with *unique commit id*
in some repository, which then can get pulled, but has history intact.
But depending on the process, the
Add generic functions for ULPI init and setting bits in
ULPI registers.
Signed-off-by: Jana Rapava ferma...@gmail.com
Cc: Marek Vasut marek.va...@gmail.com
Cc: Remy Bohmer li...@bohmer.net
Cc: Stefano Babic sba...@denx.de
Cc: Igor Grinberg grinb...@compulab.co.il
Cc: Wolfgang Grandegger
On 24/11/2011 13:04, Wolfgang Denk wrote:
There are at least a few attempts to define such standard settings.
Unfortunately they did not get really far yet, not has this been
documented yet (only a few variables like u-boot, u-boot_addr_r,
u-boot_addr, bootfile, kernel_addr_r, kernel_addr,
Hi Wolfgang,
On 11/24/11 13:46, Wolfgang Denk wrote:
Dear Igor Grinberg,
In message 4ecde8c3.2050...@compulab.co.il you wrote:
By that logic _all_ commits in the Linux kernel must have the SoB of
Linus Torvalds. Do they?
No they should not.
As for my understanding, the delivery path
Hi List,
Just wondering, anyone who is working on (or has) USB-mass-storage
support for the IMX53x in u-boot ?
For example, imx53-loco-board / imx53-qsb.
Regards,
Noel
___
U-Boot mailing list
U-Boot@lists.denx.de
On 24/11/2011 13:33, Vellemans, Noel wrote:
Hi List,
Just wondering, anyone who is working on (or has) USB-mass-storage
support for the IMX53x in u-boot ?
For example, imx53-loco-board / imx53-qsb.
Check in the archive - patches were sent, they are still under review
and new version
Hello,
Greetings for the day!
I am Robert and I am contacting you after looking at your website- .
We are a Leading Indian Based SEO Web Development Company and one of the
very few company which offer organic SEO services with a full range of
supporting services such as one way themed
commit f31a911fe (arm, post: add missing post_time_ms for arm)
enables get_ticks and get_tbclk for all arm based boards,
but kirkwood has currently no implementation for this. So
undefine this for kirkwood boards.
Signed-off-by: Holger Brunck holger.bru...@keymile.com
cc: Heiko Schocher
Hi Jana,
Good job!
IMO, this version looks much better
(although Marek is not happy with its schedule).
Some final neats below and we're done.
On 11/24/11 14:22, Jana Rapava wrote:
Add generic functions for ULPI init and setting bits in
ULPI registers.
Signed-off-by: Jana Rapava
Hi, guysI got a problem. I move a part of source code of
linux/driver/mtd/nand to the u-boot. But I found that the u-boot can not mark
the phsical bad block .
when I run nand_erase() or nand_scrub(), it return error num as
below:
This series contains bugfixes and coding style cleanups.
Furthermore it contains some extensions for MIPS24k and MIPS34k cores
as preparation for merging the support for various Lantiq SoCs.
Daniel Schwierzeck (11):
MIPS: board.c: make checkpatch.pl clean
MIPS: board.c: fix warning if
WARNING: line over 80 characters
WARNING: space prohibited between function name and open parenthesis '('
WARNING: braces {} are not necessary for single statement blocks
ERROR: return is not a function, parentheses are not required
ERROR: do not use assignment in if condition
ERROR: trailing
board.c: In function 'board_init_r':
board.c:280:8: warning: unused variable 's'
Signed-off-by: Daniel Schwierzeck daniel.schwierz...@googlemail.com
---
arch/mips/lib/board.c |3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c
Commit ab2a98b11716364bc5a8c43cdfa7fee176cda1d8 missed to
use the new config option in dcache_enable().
Fix this to avoid inconsistencies if someone wants to disable
and enable D-caches.
Signed-off-by: Daniel Schwierzeck daniel.schwierz...@googlemail.com
---
arch/mips/cpu/mips32/cache.S |6
The CPUNum field in the Ebase register contains an unique identifier
for each CPU. This helps to distinguish between CPU cores in
multi-processor systems.
Signed-off-by: Daniel Schwierzeck daniel.schwierz...@googlemail.com
---
arch/mips/include/asm/mipsregs.h | 13 +
1 files
This handler can be activated on multi-processor systems to boot only
the master CPU. All slave CPUs are halted by executing the WAIT
instruction. This is also useful to reduce the power consumption at
boot time.
Signed-off-by: Daniel Schwierzeck daniel.schwierz...@googlemail.com
---
Boards with CONFIG_SYS_NO_FLASH should not forced to define
CONFIG_SYS_FLASH_BASE. In this case the flash data in bd_info
should be initialized with 0 like the other archs do.
Signed-off-by: Daniel Schwierzeck daniel.schwierz...@googlemail.com
---
arch/mips/lib/board.c |8 ++--
1 files
Signed-off-by: Daniel Schwierzeck daniel.schwierz...@googlemail.com
---
arch/mips/cpu/mips32/cache.S | 18 ++
arch/mips/include/asm/mipsregs.h |9 -
2 files changed, 26 insertions(+), 1 deletions(-)
diff --git a/arch/mips/cpu/mips32/cache.S
Signed-off-by: Daniel Schwierzeck daniel.schwierz...@googlemail.com
---
arch/mips/cpu/mips32/start.S | 21 +++--
1 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/arch/mips/cpu/mips32/start.S b/arch/mips/cpu/mips32/start.S
index b6cb4be..03cfd5a 100644
---
Signed-off-by: Daniel Schwierzeck daniel.schwierz...@googlemail.com
---
arch/mips/include/asm/gpio.h | 13 +
1 files changed, 13 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/include/asm/gpio.h
diff --git a/arch/mips/include/asm/gpio.h b/arch/mips/include/asm/gpio.h
Signed-off-by: Daniel Schwierzeck daniel.schwierz...@googlemail.com
---
arch/mips/lib/board.c | 11 +++
1 files changed, 11 insertions(+), 0 deletions(-)
diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c
index bcf12c5..27c2cfe 100644
--- a/arch/mips/lib/board.c
+++
Build dbau1550_el only in LIST_au1xx0_el and LIST_mips_el.
Also remove obsolete lists for mips5kc.
Signed-off-by: Daniel Schwierzeck daniel.schwierz...@googlemail.com
Cc: Thomas Lange tho...@corelatus.se
---
MAKEALL | 11 ++-
1 files changed, 2 insertions(+), 9 deletions(-)
diff --git
Sorry guys; I'm bailing.
Out.
Well ... it can't be helped.
M
On Nov 24, 2011, at 1:15, Marek Vasut wrote:
This patch adds a validity check for GPIO pins to prevent clobbering
reserved bit or even registers, per suggestion of Marek Vasut.
Please note:
1. gpio_request no longer
Hi Jana,
Good job!
IMO, this version looks much better
(although Marek is not happy with its schedule).
Yes, you're not getting ACK on my side for this. Ever. I'm not reviewing this
shit anymore.
___
U-Boot mailing list
U-Boot@lists.denx.de
On 24/11/2011 07:57, Tapani Utriainen wrote:
Using your u-boot.bin on Twister, USB devices do not work in linux. Using
the u-boot.bin I submitted this issue disappears. The setup is otherwise the
same (same x-loader, u-boot settings, kernel and userland).
I cannot confirm this issue - I am
Signed-off-by: Matthias Fuchs matthias.fu...@esd.eu
---
board/esd/dasa_sim/flash.c |3 ---
1 files changed, 0 insertions(+), 3 deletions(-)
diff --git a/board/esd/dasa_sim/flash.c b/board/esd/dasa_sim/flash.c
index d6a7737..e2f2aac 100644
--- a/board/esd/dasa_sim/flash.c
+++
Signed-off-by: Matthias Fuchs matthias.fu...@esd.eu
---
board/esd/cpci405/cpci405.c |8 +++-
1 files changed, 3 insertions(+), 5 deletions(-)
diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c
index 98a8584..41b5ba0 100644
--- a/board/esd/cpci405/cpci405.c
+++
This patch fixes the PMC440 BSP command painit. The implementation was
broken since the step to the new environment handling.
Signed-off-by: Matthias Fuchs matthias.fu...@esd.eu
---
V2: rebased
board/esd/pmc440/cmd_pmc440.c | 17 +++--
1 files changed, 15 insertions(+), 2
The twister board is a development board using
the TAM3517 SOM.
Support for NAND, 2 Ethernet (EMAC and SMC911),
USB (EHCI_OMAP).
Signed-off-by: Stefano Babic sba...@denx.de
CC: Tapani Utrianen tap...@technexion.com
CC: Tom Rini tom.r...@gmail.com
CC: Sandeep Paulraj s-paul...@ti.com
---
Changes
The TAM3517 is a SOM module that can be used on custom boards.
The patch add a common configuration file that is included
by the boards using this module.
Signed-off-by: Stefano Babic sba...@denx.de
CC: Tapani Utrianen tap...@technexion.com
CC: Tom Rini tom.r...@gmail.com
CC: Sandeep Paulraj
Signed-off-by: Matthias Fuchs matthias.fu...@esd.eu
---
board/esd/common/xilinx_jtag/micro.c |2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/board/esd/common/xilinx_jtag/micro.c
b/board/esd/common/xilinx_jtag/micro.c
index 9823e5e..cba33b8 100644
---
Marek,
Can you please show me your 'fdisk -l' output on a SD card that you
use for booting M28EVK board?
Mine is as following:
$ sudo fdisk -l /dev/mmcblk0
Disk /dev/mmcblk0: 3965 MB, 3965190144 bytes
3 heads, 32 sectors/track, 80672 cylinders
Units = cylinders of 96 * 512 = 49152 bytes
Sector
On 18/11/2011 08:11, Jason Liu wrote:
The mmc host controller on the i.mx6q is called usdhc which
is redesigned based on the freescale esdhc controller.
The usdhc controller is almost compatible with esdhc except
it adds one mix register to support debug/SD3.0 and move
the low bit 0-6 of
On Thu, Nov 24, 2011 at 2:13 PM, Fabio Estevam feste...@gmail.com wrote:
Marek,
Can you please show me your 'fdisk -l' output on a SD card that you
use for booting M28EVK board?
Nevermind, I got it booting now :-)
Patches will follow soon.
Regards,
Fabio Estevam
On Thu, Nov 24, 2011 at 2:13 PM, Fabio Estevam feste...@gmail.com wrote:
Marek,
Can you please show me your 'fdisk -l' output on a SD card that you
use for booting M28EVK board?
Nevermind, I got it booting now :-)
Patches will follow soon.
Regards,
Fabio Estevam
I'll be glad
Signed-off-by: Marek Vasut marek.va...@gmail.com
Cc: Stefano Babic sba...@denx.de
Cc: Wolfgang Denk w...@denx.de
---
doc/README.m28 |6 ++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/doc/README.m28 b/doc/README.m28
index b749ce0..242230b 100644
--- a/doc/README.m28
+++
Signed-off-by: Matthias Fuchs matthias.fu...@esd.eu
---
board/esd/cpci405/cpci405.c |8 +++-
1 files changed, 3 insertions(+), 5 deletions(-)
diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c
index 98a8584..41b5ba0 100644
--- a/board/esd/cpci405/cpci405.c
Signed-off-by: Matthias Fuchs matthias.fu...@esd.eu
---
board/esd/dasa_sim/flash.c |3 ---
1 files changed, 0 insertions(+), 3 deletions(-)
diff --git a/board/esd/dasa_sim/flash.c b/board/esd/dasa_sim/flash.c
index d6a7737..e2f2aac 100644
--- a/board/esd/dasa_sim/flash.c
+++
Signed-off-by: Matthias Fuchs matthias.fu...@esd.eu
---
board/esd/common/xilinx_jtag/micro.c |2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/board/esd/common/xilinx_jtag/micro.c
b/board/esd/common/xilinx_jtag/micro.c index 9823e5e..cba33b8 100644
---
Fix:
x86emu/ops2.c: In function 'x86emuOp2_set_byte':
x86emu/ops2.c:171:11: warning: variable 'name' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
drivers/bios_emulator/x86emu/ops2.c |3 ++-
1 files changed, 2 insertions(+), 1
Fix:
interactive.c: In function 'fsl_ddr_interactive':
interactive.c:1357:15: warning: variable 'len' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
arch/powerpc/cpu/mpc8xxx/ddr/interactive.c |3 +--
1 files changed, 1
Fix:
interactive.c: In function 'fsl_ddr_interactive':
interactive.c:1357:15: warning: variable 'len' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
arch/powerpc/cpu/mpc8xxx/ddr/interactive.c |3 +--
1 files
Signed-off-by: Matthias Fuchs matthias.fu...@esd.eu
---
board/esd/common/xilinx_jtag/micro.c |2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/board/esd/common/xilinx_jtag/micro.c
b/board/esd/common/xilinx_jtag/micro.c index 9823e5e..cba33b8 100644
---
Signed-off-by: Matthias Fuchs matthias.fu...@esd.eu
---
board/esd/dasa_sim/flash.c |3 ---
1 files changed, 0 insertions(+), 3 deletions(-)
diff --git a/board/esd/dasa_sim/flash.c b/board/esd/dasa_sim/flash.c
index d6a7737..e2f2aac 100644
--- a/board/esd/dasa_sim/flash.c
On Wednesday 23 November 2011 17:33:02 Mike Frysinger wrote:
On Wednesday 23 November 2011 16:10:49 Robert Deliën wrote:
-#ifndef name_to_gpio
-#define name_to_gpio(name) simple_strtoul(name, NULL, 10)
+#ifndef gpio_name_to_pin
+#define gpio_name_to_pin(name) simple_strtoul(name,
On Thu, Nov 24, 2011 at 2:57 PM, Marek Vasut marek.va...@gmail.com wrote:
For example in Linux fdisk, the sequence for a clear card is the
following:
* o . create a clear partition table
+ * p . here you need to verify that units is
Signed-off-by: Marek Vasut marek.va...@gmail.com
Cc: Stefano Babic sba...@denx.de
Cc: Wolfgang Denk w...@denx.de
---
doc/README.m28 |3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
V2: Make this all simpler for user to follow
diff --git a/doc/README.m28 b/doc/README.m28
index
On Thursday 24 November 2011 10:39:21 Matthias Fuchs wrote:
- sprintf(str, %08X%04X,
- *(unsigned int *)ow_id[0],
- *(unsigned short *)ow_id[4]);
+ sprintf(str, %02X%02X%02X%02X%02X%02X,
+ ow_id[0], ow_id[1], ow_id[2], ow_id[3], ow_id[4], ow_id[5]);
On Thursday 24 November 2011 08:57:56 Daniel Schwierzeck wrote:
Build dbau1550_el only in LIST_au1xx0_el and LIST_mips_el.
Also remove obsolete lists for mips5kc.
if possible, i'd really like to kill off all the specialized mips lists and do
selection purely based on fields in boards.cfg.
On Thu, Nov 24, 2011 at 3:39 PM, Marek Vasut marek.va...@gmail.com wrote:
Signed-off-by: Marek Vasut marek.va...@gmail.com
Cc: Stefano Babic sba...@denx.de
Cc: Wolfgang Denk w...@denx.de
---
doc/README.m28 | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
V2: Make this all
Signed-off-by: Marek Vasut marek.va...@gmail.com
Cc: Stefano Babic sba...@denx.de
Cc: Wolfgang Denk w...@denx.de
---
doc/README.m28 |3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
V2: Make this all simpler for user to follow
V3: Fix grammar
diff --git a/doc/README.m28
Am Mittwoch, den 23.11.2011, 15:40 +0100 schrieb Michal Simek:
Hi Stephan,
Stephan Linz wrote:
As a result of the commit 6833260 the uart16550 driver
is broken for Microblaze big endian systems, because of
the missing 3 byte offset. Other than as described, the
U-Boot BSP does not
On Nov 24, 2011, at 11:14 AM, Marek Vasut wrote:
Fix:
x86emu/ops2.c: In function 'x86emuOp2_set_byte':
x86emu/ops2.c:171:11: warning: variable 'name' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
Stephan Linz wrote:
Am Mittwoch, den 23.11.2011, 15:40 +0100 schrieb Michal Simek:
Hi Stephan,
Stephan Linz wrote:
As a result of the commit 6833260 the uart16550 driver
is broken for Microblaze big endian systems, because of
the missing 3 byte offset. Other than as described, the
U-Boot BSP
* Simon Glass wrote:
We need to define CONFIG_ENV_IS_NOWHERE to avoid this error:
cmd_nvedit.c:69:3: error: #error Define one of
CONFIG_ENV_IS_IN_{EEPROM|FLASH|DATAFLASH|ONENAND|SPI_FLASH|MG_DISK|NVRAM|MMC}
or CONFIG_ENV_IS_NOWHERE
Odd. I haven't seen this before when building both
Am Donnerstag, den 24.11.2011, 20:13 +0100 schrieb Michal Simek:
Stephan Linz wrote:
--snip--
Here is patch I have used. Please add that changes to v2 patch.
I'll do it this way. Give me a little time to change and test it.
Currently I am sill working on refactoring of the LL TEMAC
Dear Stefano Babic,
In message 1322149442-16555-2-git-send-email-sba...@denx.de you wrote:
The twister board is a development board using
the TAM3517 SOM.
Support for NAND, 2 Ethernet (EMAC and SMC911),
USB (EHCI_OMAP).
...
Nitpick:
+#define xstr(s) str(s)
+#define str(s) #s
Dear Stefano Babic,
In message 1322149442-16555-1-git-send-email-sba...@denx.de you wrote:
The TAM3517 is a SOM module that can be used on custom boards.
The patch add a common configuration file that is included
by the boards using this module.
...
diff --git
Dear Marek Vasut,
In message 1322153845-19369-1-git-send-email-marek.va...@gmail.com you wrote:
Signed-off-by: Marek Vasut marek.va...@gmail.com
Cc: Stefano Babic sba...@denx.de
Cc: Wolfgang Denk w...@denx.de
---
doc/README.m28 |6 ++
1 files changed, 6 insertions(+), 0
Dear Marek Vasut,
In message 20241814.34611.marek.va...@gmail.com you wrote:
-char *name = 0;
+__maybe_unused char *name = 0;
I don't like this __maybe_unused stuff, it seems like you're hiding possible
errors.
I don't like it either, but there are cases where this is the
On Tue, 8 Nov 2011 13:40:25 +0800
Andrew Chen yanpai.c...@gmail.com wrote:
From: Yan-Pai Chen ypc...@faraday-tech.com
MACH_TYPE_FARADAY was dropped from mach-types.h. Add it back to
board config file.
Signed-off-by: Yan-Pai Chen ypc...@faraday-tech.com
---
On Sat, 19 Nov 2011 11:45:43 +0100
Christian Riesch christian.rie...@omicron.at wrote:
This patch fixes the build breakage for the davinci_sonata board.
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Sergey Kubushyn k...@koi8.net
Cc: Sandeep Paulraj s-paul...@ti.com
---
On Sat, 19 Nov 2011 11:45:42 +0100
Christian Riesch christian.rie...@omicron.at wrote:
This patch fixes the build breakage for the davinci_schmoogie board.
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Sergey Kubushyn k...@koi8.net
Cc: Sandeep Paulraj s-paul...@ti.com
---
OS X Lion's c-library implements getline(), therefore prevent including the old
helper implementation for __DARWIN_C_LEVEL 200809L.
Without this patch following error occours:
---8---
In file included from os_support.h:32,
from img2srec.c:55:
getline.h:1: error: conflicting
On Sat, 19 Nov 2011 11:45:44 +0100
Christian Riesch christian.rie...@omicron.at wrote:
This patch replaces the HAWKBOARD_KICK{0,1}_UNLOCK defines by
DV_SYSCFG_KICK{0,1}_UNLOCK.
The kick register values are not hawkboard specific but may be used
for all davinci boards. In commit
On Thu, 24 Nov 2011 03:32:16 +0100
Marek Vasut marek.va...@gmail.com wrote:
Signed-off-by: Marek Vasut marek.va...@gmail.com
Cc: Anatolij Gustschin ag...@denx.de
Cc: Stefano Babic sba...@denx.de
---
drivers/video/cfb_console.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
On Wed, 2 Nov 2011 09:16:43 +0800
chang-ming.hu...@freescale.com wrote:
From: Jerry Huang chang-ming.hu...@freescale.com
Add the 1920x1080 and 1280x720 resolution support.
Acked-by: Timur Tabi ti...@freescale.com
Signed-off-by: Jerry Huang chang-ming.hu...@freescale.com
CC: Anatolij
Hi,
As there was no real conclusion on my previous arm mach-types.h thread, i
have to reemphasize that the current mach types handling is broken.
1. u-boot follows linux mach-types.h
2. linux only includes ids
a, they have (non DT!) board support for or
b, id which are not older
Hi,
Dear Marek Vasut,
In message 20241814.34611.marek.va...@gmail.com you wrote:
-char *name = 0;
+__maybe_unused char *name = 0;
I don't like this __maybe_unused stuff, it seems like you're hiding
possible errors.
I don't like it either, but there are cases where
Dear Marek Vasut,
In message 1322153845-19369-1-git-send-email-marek.va...@gmail.com you
wrote:
Signed-off-by: Marek Vasut marek.va...@gmail.com
Cc: Stefano Babic sba...@denx.de
Cc: Wolfgang Denk w...@denx.de
---
doc/README.m28 |6 ++
1 files changed, 6 insertions(+),
As a result of the commit 6833260 the uart16550 driver
is broken for Microblaze big endian systems, because of
the missing 3 byte offset. Other than as described, not
all U-Boot BSP will treat properly the 3 byte offset.
This why prefer to mask out the 3 byte offset in general
and setup correct
Am 24/11/2011 21:43, schrieb Wolfgang Denk:
+hostname= xstr(CONFIG_HOSTNAME) \0 \
+bootfile= xstr(CONFIG_HOSTNAME) /uImage\0 \
Here you rely on xstr() being defined in some higher level header
file.
This was not thought, I miss to move it,
On 24/11/11 17:36, Igor Grinberg wrote:
On 11/24/11 01:58, James Steward wrote:
Hi Igor,
On 23/11/11 23:19, Igor Grinberg wrote:
Hi James,
On 11/22/11 07:22, James Steward wrote:
On 22/11/11 15:51, Marek Vasut wrote:
Hi,
I'm trying to build U-Boot for the above mentioned board.
Hi Gabe,
I tried to submit those patches today, but I somehow managed to make a
complete mess of the x86 repo - It now have a bunch of duplicate patches
Please do not rebase anything against u-boot-x86 until the mess has been
sorted out
Sorry for the inconvenience
If anyone wants to have a
Dear Chander Kashyap,
On 24 November 2011 19:48, Chander Kashyap chander.kash...@linaro.org wrote:
As per new conventions Samsung SoC's are named as Exynos.
Cortex-A9 based Soc's are named as exynos4. s5pc2xx is cortex-A9
based, hence renamed to exynos4. This is done as per kernel
naming
Hi,
I am trying to save environment variables on a SD card of a MX28EVK board.
'save' command reports no errors, but if I reboot the board then the
board no longer boots.
In order to recover the boot, I need to reformat the SD card and
reflash the u-boot.sd image.
I am trying the following
On Thu, Nov 24, 2011 at 8:11 PM, Wolfgang Denk w...@denx.de wrote:
Dear Jason Hui,
In message
CAFQ4atRGwSxiw+mik8wSMMUVW4M=n9ws55ppd1ifhu-e1aj...@mail.gmail.com you
wrote:
I'm just get confused. It seems from you that we can both use:
CONFIG_option and CONFIG_SYS_ in this patch? right?
On 10/31/2011 02:13 PM, Purushothamrao wrote:
Kindly guide me how to configure u-boot to generate u-boot.bin for
NIOS-2 processor.
Dear Purushothamrao,
Please follow the wiki page,
http://alterawiki.com/wiki/DasUBoot
Best regards,
Thomas
___
On Thu, 24 Nov 2011 16:19:26 +0100
Stefano Babic sba...@denx.de wrote:
On 24/11/2011 07:57, Tapani Utriainen wrote:
Using your u-boot.bin on Twister, USB devices do not work in linux. Using
the u-boot.bin I submitted this issue disappears. The setup is otherwise
the
same (same
On Tue, Nov 22, 2011 at 11:51 PM, Stefano Babic sba...@denx.de wrote:
The serial driver for iMX SOCs is continuosly changed if a
new SOC or not yet used port is used. CONFIG_SYS_SOC_UART Port
defines were used only to find the base address for the selected UART.
Instead of that, move the base
DO YOU NEED A LOAN? CONTACT US VIA APPLICATION.___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On 24/11/11 17:36, Igor Grinberg wrote:
On 11/24/11 01:58, James Steward wrote:
A search with grep CONFIG_ENV_IS_EMBEDDED `find . -name *.h`
indicates the answer is no. Should it be set?
AFAIK, environment variable is used only when you have
ENV_IS_EMBEDDED set. Also, there is some logic in
As per new conventions Samsung SoC's are named as Exynos.
Cortex-A9 based Soc's are named as exynos4. s5pc2xx is cortex-A9
based, hence renamed to exynos4. This is done as per kernel
naming convetions.
Similerly s5pc210 is now exynos4210. Hence S5PC210/s5pc210
suffix/prefix has been renamed to
Dear James Steward,
In message 4eced2f2.8040...@inchipdesign.com.au you wrote:
I guess the variable environment is not defined, but where should it be
defined? There are a lot of hits when I search.
When embedding the environment, you must set up a specific memory mep.
This is done in the
1 - 100 of 103 matches
Mail list logo
