Hi,
now, after U-Boot v2012.07 is released, I'd like to ask what's the
status the dcache support for i.MX(6)? Is it safe to enable
CONFIG_SYS_DCACHE_OFF now? E.g. for the SabreLite [1]?
And if so, do we have to enable CONFIG_MMC_BOUNCE_BUFFER, too?
Opinions?
Many thanks and best regards
On 31.07.2012 07:56, Dirk Behme wrote:
Hi,
now, after U-Boot v2012.07 is released, I'd like to ask what's the
status the dcache support for i.MX(6)? Is it safe to enable
CONFIG_SYS_DCACHE_OFF now?
Arg, inverted logic ;) I meant 'disable/remove' CONFIG_SYS_DCACHE_OFF
here. I.e. is it save
-Original Message-
From: Jamie Lentin [mailto:j...@lentin.co.uk]
Sent: 31 July 2012 03:26
To: u-boot@lists.denx.de
Cc: Prafulla Wadaskar; albert.u.b...@aribaud.net;
ub...@lukaperkov.net; Jamie Lentin
Subject: [PATCH 2/2] kirkwood: Add support for the D-Link DNS-320
Extend dnskw
-Original Message-
From: Michael Walle [mailto:mich...@walle.cc]
Sent: 31 July 2012 02:17
To: u-boot@lists.denx.de
Cc: Michael Walle; Prafulla Wadaskar
Subject: [PATCH] lsxl: support power switch
This patch restores the Linkstation's original behaviour when powering
off.
Once
On Sun, Jul 29, 2012 at 11:53:24PM -0700, Simon Glass wrote:
This series adds NAND flash support to Tegra and enables it on Seaboard.
Included here is a proposed device tree binding with most of the properties
private to nvidia,. The binding includes information about the NAND
controller as
In order for cache invalidation and flushing to work properly, the data
and OOB buffers must be aligned to full cache lines.
Signed-off-by: Thierry Reding thierry.red...@avionic-design.de
---
common/cmd_nand.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git
This commit enables NAND support on the Tamonten Evaluation Carrier and
adds the corresponding device tree nodes. Furthermore, the U-Boot
environment can now be stored in NAND.
Signed-off-by: Thierry Reding thierry.red...@avionic-design.de
---
board/avionic-design/dts/tegra20-tec.dts | 11
Hello
Help make a u-bottles for sti7109 for mb442 motherboards and Linux to boot
in 32bit mode. (now loaded in 29bit mode)
Thanks in advance.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Composite USB download gadget support (g_dnl) for download functions.
This code works on top of composite gadget.
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Cc: Marek Vasut ma...@denx.de
---
Changes for v2:
- G_DNL_{VENDOR_NUM,
Those patches add support for composite USB download gadget.
This gadget (at least for now) is equipped with DFU download function.
A separate DFU back-end and front-end have been added.
Back-end is placed at ./drivers/dfu directory. The front-end is implemented
as USB function.
The back-end is
New, separate driver at ./drivers/dfu has been added. It allows platform
and storage independent operation of DFU.
It has been extended to use new MMC level of command abstraction.
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Cc:
Support for u-boot's dfu interface dev [list] command.
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Cc: Marek Vasut ma...@denx.de
---
Changes for v2:
- None
Changes for v3:
- Remove unnecessary initialization to NULL of dynamic
Support for MMC storage devices to work with DFU framework.
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Cc: Marek Vasut ma...@denx.de
---
Changes for v2:
- None
Changes for v3:
- Provide special abstraction layer
Support for f_dfu USB function.
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Cc: Marek Vasut ma...@denx.de
---
Changes for v2:
- Replace kzalloc and kfree with free and calloc
- Reorganization of calloc calls
- Misspelling
Support for USB UDC driver at trats board.
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Cc: Marek Vasut ma...@denx.de
Cc: Minkyu Kang mk7.k...@samsung.com
---
Changes for v2:
- replace puts to debug
---
board/samsung/trats/trats.c
Enable the g_dnl composite USB gadget driver with embedded DFU function on it.
It now uses the composite gadget framework to support download specific
USB functions (like enabled DFU or USB Mass Storage).
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
Signed-off-by: Kyungmin Park
+Scott
On Tue, Jul 31, 2012 at 7:21 AM, Thierry Reding
thierry.red...@avionic-design.de wrote:
In order for cache invalidation and flushing to work properly, the data
and OOB buffers must be aligned to full cache lines.
Signed-off-by: Thierry Reding thierry.red...@avionic-design.de
Acked-by:
The BF533-EZKIT boards have this old ST flash.
Signed-off-by: Mike Frysinger vap...@gentoo.org
---
drivers/mtd/jedec_flash.c | 20
1 file changed, 20 insertions(+)
diff --git a/drivers/mtd/jedec_flash.c b/drivers/mtd/jedec_flash.c
index 2350f36..b6cb037 100644
---
Signed-off-by: Mike Frysinger vap...@gentoo.org
---
board/bf533-ezkit/Makefile|2 +-
board/bf533-ezkit/bf533-ezkit.c | 22 +-
board/bf533-ezkit/flash-defines.h | 124 --
board/bf533-ezkit/flash.c | 489 -
On Friday 27 July 2012 00:41:45 Wolfgang Denk wrote:
Marek Vasut wrote:
Check the following list, it's the list of drivers scattered (misplaced)
across the tree. The list is not complete and might be inaccurate. But
it should give a good impression of what I'm going to break soon:
Hello Stefano,
Could you review the patch?
Thanks!
Best Regards,
Lauri Hintsala
On 07/09/2012 04:14 PM, Veli-Pekka Peltola wrote:
This adds support for Bluegiga APX4 Development Kit. It is built around
Freescale i.MX28. Currently supported features are: ethernet, I2C, MMC,
RTC and USB. APX4
On Friday 27 July 2012 15:10:00 Marek Vasut wrote:
Dear Mike Frysinger,
On Friday 27 July 2012 14:35:25 Marek Vasut wrote:
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -34,6 +34,8 @@ else
COBJS-y += bootm.o
endif
+COBJS-y += ashldi3.o ashrdi3.o
Hello Wolfgang,
The following changes since commit b98b611502f5e0a85a1f8e15cf46c470cb105614:
Merge branch 'next' of git://git.denx.de/u-boot (2012-07-30 20:39:52 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
Holger Brunck (2):
i2c: deblock
On Saturday 28 July 2012 15:57:33 Wolfgang Denk wrote:
Marek Vasut wrote:
include/common.h |7 +++
1 file changed, 7 insertions(+)
We have similar things already, and we don't add dead code - you add a
macro without users here.
It's used in 2/2 ... what macro do
On Sunday 29 July 2012 08:43:00 Sabri Altunbas wrote:
I installed buildroot as my embedded linux environment. For first time I
can build u-boot. But if i change a c-file and try to recompile u-boot. It
doesn,t work. Buildroot doesn,t notice this changing and does nothing.
this is a buildroot
On 31 July 2012 15:37, Lukasz Majewski l.majew...@samsung.com wrote:
Support for USB UDC driver at trats board.
Signed-off-by: Lukasz Majewski l.majew...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
Cc: Marek Vasut ma...@denx.de
Cc: Minkyu Kang mk7.k...@samsung.com
On 31 July 2012 15:37, Lukasz Majewski l.majew...@samsung.com wrote:
Enable the g_dnl composite USB gadget driver with embedded DFU function on it.
It now uses the composite gadget framework to support download specific
USB functions (like enabled DFU or USB Mass Storage).
Signed-off-by:
Hi Tom,
[snip..]
diff --git a/arch/arm/include/asm/arch-omap5/omap.h
b/arch/arm/include/asm/arch-omap5/omap.h
index 7f05cb5..c697e0b 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -39,11 +39,6 @@
#define OMAP54XX_L4_WKUP_BASE
From: Jim Shimer jamesshi...@motorola.com
---
common/usb_storage.c |4
1 file changed, 4 insertions(+)
diff --git a/common/usb_storage.c b/common/usb_storage.c
index bdc306f..c5c37a4 100644
--- a/common/usb_storage.c
+++ b/common/usb_storage.c
@@ -1074,12 +1074,14 @@ unsigned long
The call to SYSTEM_MAP assumes that the u-boot output is in $PWD when
it really should be in $(obj). This fixes building out of tree.
Signed-off-by: Mike Frysinger vap...@gentoo.org
---
Makefile |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Makefile b/Makefile
index
On Tuesday 31 July 2012 09:38:32 Mike Frysinger wrote:
The BF533-EZKIT boards have this old ST flash.
Signed-off-by: Mike Frysinger vap...@gentoo.org
Acked-by: Stefan Roese s...@denx.de
Mike, do you intend to push this via your blackfin repo? If yes, then please
go ahead. Otherwise I'll
On Mon, 30 Jul 2012, Prafulla Wadaskar wrote:
Dear Jamie Lentin
-Original Message-
From: Jamie Lentin [mailto:j...@lentin.co.uk]
Sent: 31 July 2012 03:26
To: u-boot@lists.denx.de
Cc: Prafulla Wadaskar; albert.u.b...@aribaud.net;
ub...@lukaperkov.net; Jamie Lentin
Subject: [RESEND]
On Mon, 30 Jul 2012, Prafulla Wadaskar wrote:
-Original Message-
From: Jamie Lentin [mailto:j...@lentin.co.uk]
Sent: 31 July 2012 03:26
To: u-boot@lists.denx.de
Cc: Prafulla Wadaskar; albert.u.b...@aribaud.net;
ub...@lukaperkov.net; Jamie Lentin
Subject: [PATCH 2/2] kirkwood: Add
Hi Fabio,
On 31.05.2012 19:24, Fabio Estevam wrote:
Add splaschscreen support.
It was used a Hannstar 1024 x 768 LVDS panel that can be connected to the
mx6qsabrelite board.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
I understand this patch will need to be improved, but I
Hi Scott,
On Mon, Jul 30, 2012 at 11:49 PM, Scott Wood scottw...@freescale.com wrote:
On 07/30/2012 01:53 AM, Simon Glass wrote:
Add a flash node to handle the NAND, including memory timings and
page / block size information.
Signed-off-by: Simon Glass s...@chromium.org
---
Changes in v2:
Hi Scott,
On Tue, Jul 31, 2012 at 12:05 AM, Scott Wood scottw...@freescale.com wrote:
On 07/30/2012 01:53 AM, Simon Glass wrote:
diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
index f95be58..d936b1e 100644
--- a/arch/arm/dts/tegra20.dtsi
+++ b/arch/arm/dts/tegra20.dtsi
+Thierry
Hi,
On Thu, Jul 12, 2012 at 4:25 PM, Simon Glass s...@chromium.org wrote:
Add LCD definitions and also a proposed binding for LCD displays.
The PWM is as per what will likely be committed to linux-next soon.
The displaymode binding comes from a proposal here:
Hi Thierry,
On Thu, Jul 19, 2012 at 8:58 AM, Thierry Reding
thierry.red...@avionic-design.de wrote:
On Thu, Jul 12, 2012 at 08:25:00AM -0700, Simon Glass wrote:
This series adds support for the Tegra2x's display peripheral. This
supports the LCD display on Seaboard and we use this to enable
This small series of patches tidies up the clock IDs that are used to interact
with the PLL controllers on the DaVinci DA8xx processors.
It more clearly defines the structure and meaning of the IDs and untangles some
model-specific code that can't be shared among the family. This tidying allows
On the DA830, UART2's clock is derived from PLL controller 0 output 2.
On the DA850, it is in the ASYNC3 group, and may be switched between PLL
controller 0 or 1. Fix the definition of the ID to match.
Signed-off-by: Laurence Withers lwith...@guralp.com
Cc: Tom Rini tr...@ti.com
Cc: Prabhakar Lad
Tidy up the clock IDs defined for the DA8xx SOCs. With this new structure in
place, it is clear how to define new clock IDs, and how these map to the
numbers presented in the technical reference manual.
Signed-off-by: Laurence Withers lwith...@guralp.com
Cc: Tom Rini tr...@ti.com
Cc: Prabhakar
Replace a magic number for the DDR2/mDDR PHY clock ID with a proper
definition. In addition, don't request this clock ID on DA830 hardware,
which does not have a DDR2/mDDR PHY (or associated PLL controller).
Signed-off-by: Laurence Withers lwith...@guralp.com
Cc: Tom Rini tr...@ti.com
Cc:
For the DA8xx family of SoCs, the set_cpu_clk_info() function was not
initialising the DSP frequency, leading to 'bdinfo' command output such as:
[...snip...]
ARM frequency = 300 MHz
DSP frequency = -536870913 MHz
DDR frequency = 300 MHz
This commit provides a separate implementation of
Newer gcc versions will sometimes use a Preg when r constraints, but
that'll fail if we use an Ireg in the assignment. So force the code
to always use a Dreg.
This also fixes early boot crashes for older Blackfin parts when compiled
with gcc-4.5. This version ends up selecting the same register
Putting memory into self refresh only happens when doing development, not
during the normal course of things, so mark those code paths as unlikely.
Signed-off-by: Mike Frysinger vap...@gentoo.org
---
arch/blackfin/cpu/initcode.c | 10 +-
1 file changed, 5 insertions(+), 5 deletions(-)
On Tue, Jul 31, 2012 at 10:27:23AM +0100, Simon Glass wrote:
+Thierry
Hi,
On Thu, Jul 12, 2012 at 4:25 PM, Simon Glass s...@chromium.org wrote:
Add LCD definitions and also a proposed binding for LCD displays.
The PWM is as per what will likely be committed to linux-next soon.
The
On 09/07/2012 15:14, Veli-Pekka Peltola wrote:
This adds support for Bluegiga APX4 Development Kit. It is built around
Freescale i.MX28. Currently supported features are: ethernet, I2C, MMC,
RTC and USB. APX4 has only one ethernet port.
Signed-off-by: Veli-Pekka Peltola
This patch adds pinmux support for SPI channels
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
---
arch/arm/cpu/armv7/exynos/pinmux.c| 51 -
arch/arm/include/asm/arch-exynos/periph.h |5 +++
arch/arm/include/asm/arch-exynos/pinmux.h |3 ++
This patch set adds SPI driver for EXYNOS5 and enables same.
This patchset is based on top of latest V7 I2C patches which
are merged in u-boot-i2c.
url for same:
http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/136058
Rajeshwari Shinde (8):
EXYNOS5: Add pinmux support for SPI
SPI:
This patch adds api to calculate and set the clock for SPI channels
Signed-off-by: Simon Glass s...@chromium.org
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
---
arch/arm/cpu/armv7/exynos/clock.c | 122
arch/arm/include/asm/arch-exynos/clk.h |
Daisy has a different Winbond part as compared to the SMDK.
Add the part details to the SPI flash table.
Signed-off-by: Abhilash Kesavan a.kesa...@samsung.com
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
---
drivers/mtd/spi/winbond.c |8
1 files changed, 8
This patch adds a new SPI mode flags for SPI slave mode. It enables
slave mode in a SPI interface, and is set/clear in spi_setup_slave()
from the mode parameter.
Signed-off-by: Padmavathi Venna padm...@samsung.com
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
---
include/spi.h |
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
---
arch/arm/include/asm/arch-exynos/cpu.h |6 ++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/arch/arm/include/asm/arch-exynos/cpu.h
b/arch/arm/include/asm/arch-exynos/cpu.h
index 0e6ea87..89c2dd3 100644
---
This patch enables SPI driver for EXYNOS5.
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
---
board/samsung/smdk5250/smdk5250.c |3 +++
include/configs/smdk5250.h| 23 ++-
2 files changed, 25 insertions(+), 1 deletions(-)
diff --git
This patch adds SPI driver for EXYNOS.
Signed-off-by: Simon Glass s...@chromium.org
Signed-off-by: Padmavathi Venna padm...@samsung.com
Signed-off-by: Gabe Black gabebl...@google.com
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
---
arch/arm/include/asm/arch-exynos/spi.h | 78
This patch enables SPI Booting for EXYNOS5
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
---
board/samsung/smdk5250/Makefile |2 +-
board/samsung/smdk5250/{mmc_boot.c = spl_boot.c} | 31 +++-
include/configs/smdk5250.h|
-Original Message-
From: Jamie Lentin [mailto:j...@lentin.co.uk]
Sent: 31 July 2012 14:01
To: Prafulla Wadaskar
Cc: u-boot@lists.denx.de; albert.u.b...@aribaud.net;
ub...@lukaperkov.net
Subject: RE: [RESEND] [PATCH 0/2] kirkwood: Generalise dns325 support,
include dns320
On
On Tue, July 31, 2012 07:59, Prafulla Wadaskar wrote:
-Original Message-
From: Michael Walle [mailto:mich...@walle.cc]
Sent: 31 July 2012 02:17
To: u-boot@lists.denx.de
Cc: Michael Walle; Prafulla Wadaskar
Subject: [PATCH] lsxl: support power switch
This patch restores the
This patch set adds SPI driver for EXYNOS5 and enables same.
This patchset is based on top of latest V7 I2C patches which
are merged in u-boot-i2c.
url for same:
http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/136058
Changes in V2:
- Correted the Commit message.
Rajeshwari
This patch adds pinmux support for SPI channels
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
---
Changes in V2:
- None.
arch/arm/cpu/armv7/exynos/pinmux.c| 51 -
arch/arm/include/asm/arch-exynos/periph.h |5 +++
This patch adds api to calculate and set the clock for SPI channels
Signed-off-by: Simon Glass s...@chromium.org
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
---
Changes in V2:
- None
arch/arm/cpu/armv7/exynos/clock.c | 122
SMDK EVT1 has a different Winbond part added its part details
to the SPI flash table.
Signed-off-by: Abhilash Kesavan a.kesa...@samsung.com
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
---
Changes in V2:
- Corrected the commit message.
drivers/mtd/spi/winbond.c |8
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
---
Changes in V2:
- None
arch/arm/include/asm/arch-exynos/cpu.h |6 ++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/arch/arm/include/asm/arch-exynos/cpu.h
b/arch/arm/include/asm/arch-exynos/cpu.h
index
This patch adds a new SPI mode flags for SPI slave mode. It enables
slave mode in a SPI interface, and is set/clear in spi_setup_slave()
from the mode parameter.
Signed-off-by: Padmavathi Venna padm...@samsung.com
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
---
Changes in V2:
This patch adds SPI driver for EXYNOS.
Signed-off-by: Simon Glass s...@chromium.org
Signed-off-by: Padmavathi Venna padm...@samsung.com
Signed-off-by: Gabe Black gabebl...@google.com
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
---
Changes in V2:
- None.
This patch enables SPI Booting for EXYNOS5
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
---
Changes in V2:
- None.
board/samsung/smdk5250/Makefile |2 +-
board/samsung/smdk5250/{mmc_boot.c = spl_boot.c} | 31 +++-
This patch enables SPI driver for EXYNOS5.
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
---
Changes in V2:
- None.
board/samsung/smdk5250/smdk5250.c |3 +++
include/configs/smdk5250.h| 23 ++-
2 files changed, 25 insertions(+), 1
On 07/31/2012 01:26 PM, Stefano Babic wrote:
I see no problems in your patch - I will push it into the -next branch.
Thanks, We'll continue developing.
Lauri
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
-Original Message-
From: Michael Walle [mailto:mich...@walle.cc]
Sent: 31 July 2012 16:22
To: Prafulla Wadaskar
Cc: Michael Walle; u-boot@lists.denx.de
Subject: RE: [PATCH] lsxl: support power switch
On Tue, July 31, 2012 07:59, Prafulla Wadaskar wrote:
-Original
On 09/07/2012 15:14, Veli-Pekka Peltola wrote:
This adds support for Bluegiga APX4 Development Kit. It is built around
Freescale i.MX28. Currently supported features are: ethernet, I2C, MMC,
RTC and USB. APX4 has only one ethernet port.
Signed-off-by: Veli-Pekka Peltola
Dear Dirk Behme,
On 31.07.2012 07:56, Dirk Behme wrote:
Hi,
now, after U-Boot v2012.07 is released, I'd like to ask what's the
status the dcache support for i.MX(6)? Is it safe to enable
CONFIG_SYS_DCACHE_OFF now?
Arg, inverted logic ;) I meant 'disable/remove'
On Tuesday 31 July 2012 06:42:37 Rajeshwari Shinde wrote:
This patch adds a new SPI mode flags for SPI slave mode. It enables
slave mode in a SPI interface, and is set/clear in spi_setup_slave()
from the mode parameter.
there is no such functionality in the current SPI API. if you want to
On Tuesday 31 July 2012 04:50:17 Stefan Roese wrote:
On Tuesday 31 July 2012 09:38:32 Mike Frysinger wrote:
The BF533-EZKIT boards have this old ST flash.
Signed-off-by: Mike Frysinger vap...@gentoo.org
Acked-by: Stefan Roese s...@denx.de
Mike, do you intend to push this via your
On Thu, Jul 26, 2012 at 10:32 PM, Fabio Estevam feste...@gmail.com wrote:
Hi Michael,
Hi Fabio,
good to hear from you.
On Tue, Jul 10, 2012 at 4:08 PM, Hornung, Michael mhorn...@init-ka.de wrote:
gd-bd-bi_baudrate = gd-baudrate;
/* Ram ist board specific, so move it to
Dear Mike Frysinger,
On Saturday 28 July 2012 15:57:33 Wolfgang Denk wrote:
Marek Vasut wrote:
include/common.h |7 +++
1 file changed, 7 insertions(+)
We have similar things already, and we don't add dead code - you add
a macro without users here.
It's
On Tuesday 31 July 2012 09:55:55 Marek Vasut wrote:
Dear Mike Frysinger,
On Saturday 28 July 2012 15:57:33 Wolfgang Denk wrote:
Marek Vasut wrote:
include/common.h |7 +++
1 file changed, 7 insertions(+)
We have similar things already, and we don't add dead
Dear Mike Frysinger,
On Tuesday 31 July 2012 09:55:55 Marek Vasut wrote:
Dear Mike Frysinger,
On Saturday 28 July 2012 15:57:33 Wolfgang Denk wrote:
Marek Vasut wrote:
include/common.h |7 +++
1 file changed, 7 insertions(+)
We have similar things
On Tuesday 31 July 2012 10:08:51 Marek Vasut wrote:
Dear Mike Frysinger,
On Tuesday 31 July 2012 09:55:55 Marek Vasut wrote:
Dear Mike Frysinger,
would be good to import
linux/stringify.h (rather than adding these macros to common.h) and
converting all consumers over to that.
That did it! Thanks.
Bill
On 7/30/2012 3:59 PM, Fabio Estevam wrote:
On Mon, Jul 30, 2012 at 3:53 PM, Billbsou...@techsi.com wrote:
Progress! I switched all the references from ttyAMA0... to ttyAM0. Also
changed netargs too. Now it starts to boot linux but hangs right after the
line
The following changes since commit b98b611502f5e0a85a1f8e15cf46c470cb105614:
Merge branch 'next' of git://git.denx.de/u-boot (2012-07-30 20:39:52 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-blackfin.git sf
for you to fetch changes up to
On 07/31/2012 01:33 AM, R, Sricharan wrote:
Hi Tom,
[snip..]
diff --git a/arch/arm/include/asm/arch-omap5/omap.h
b/arch/arm/include/asm/arch-omap5/omap.h
index 7f05cb5..c697e0b 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -39,11 +39,6
Hi Tom,
On Tue, Jul 31, 2012 at 8:43 PM, Tom Rini tr...@ti.com wrote:
On 07/31/2012 01:33 AM, R, Sricharan wrote:
Hi Tom,
[snip..]
diff --git a/arch/arm/include/asm/arch-omap5/omap.h
b/arch/arm/include/asm/arch-omap5/omap.h
index 7f05cb5..c697e0b 100644
---
Hello all!
In u-boot-dm mailinglist we had a discussion about implementation of
early_malloc (not only) for U-Boot Driver Model. The intention is to
have a simple malloc() function in the early stage of init before
relocation and before RAM is up and running. There was an experimental
patch that
On 07/31/2012 12:21 AM, Thierry Reding wrote:
In order for cache invalidation and flushing to work properly, the data
and OOB buffers must be aligned to full cache lines.
Signed-off-by: Thierry Reding thierry.red...@avionic-design.de
You probably want to CC the NAND maintainer, Scott Wood (I
On 07/31/2012 12:21 AM, Thierry Reding wrote:
This commit enables NAND support on the Tamonten Evaluation Carrier and
adds the corresponding device tree nodes. Furthermore, the U-Boot
environment can now be stored in NAND.
diff --git a/include/configs/tec.h b/include/configs/tec.h
+/*
On 07/31/2012 08:27 AM, R, Sricharan wrote:
Hi Tom,
On Tue, Jul 31, 2012 at 8:43 PM, Tom Rini tr...@ti.com wrote:
On 07/31/2012 01:33 AM, R, Sricharan wrote:
Hi Tom,
[snip..]
diff --git a/arch/arm/include/asm/arch-omap5/omap.h
b/arch/arm/include/asm/arch-omap5/omap.h
index
Correct.
DRAM_ADDR_SPACE_END should be 0x for OMAP5.
Thanks,
Sricharan
On Tue, Jul 31, 2012 at 9:12 PM, Tom Rini tr...@ti.com wrote:
On 07/31/2012 08:27 AM, R, Sricharan wrote:
Hi Tom,
On Tue, Jul 31, 2012 at 8:43 PM, Tom Rini tr...@ti.com wrote:
On 07/31/2012 01:33 AM, R,
Hello Stephen,
On 7/15/2012 10:53 PM, Stephen Warren wrote:
On 07/11/2012 02:37 PM, Vikram Narayanan wrote:
Driver for BCM2835 SoC. This gives the basic functionality of
setting/clearing the output.
diff --git a/arch/arm/include/asm/arch-bcm2835/gpio.h
From: Stephen Warren swar...@nvidia.com
The environment is now stored in NAND, so update the comment to say so,
rather than saying it's not stored.
Signed-off-by: Stephen Warren swar...@nvidia.com
---
Tom, feel free to just squash this into my patch that added environment
support to Harmony if
On 07/31/2012 09:46 AM, Vikram Narayanan wrote:
On 7/15/2012 10:53 PM, Stephen Warren wrote:
On 07/11/2012 02:37 PM, Vikram Narayanan wrote:
Driver for BCM2835 SoC. This gives the basic functionality of
setting/clearing the output.
diff --git a/arch/arm/include/asm/arch-bcm2835/gpio.h
Stephen/Thierry,
-Original Message-
From: Stephen Warren [mailto:swar...@wwwdotorg.org]
Sent: Tuesday, July 31, 2012 8:47 AM
To: Tom Warren
Cc: Thierry Reding; U-Boot Mailing List; Stephen Warren
Subject: [PATCH] tegra: harmony: fix comments for environment config options
From:
It is desirable to use different port numbers for sending and receiving
packets with netconsole in the case where you have more than one device
on the local subnet with netconsole enabled for broadcast. When they
use the same port for both, any output from one will look like input to
the other.
Allow a board to configure a larger buffer for netconsole, but leave
the default.
Signed-off-by: Joe Hershberger joe.hershber...@ni.com
Cc: Mike Frysinger vap...@gentoo.org
---
doc/README.NetConsole|2 ++
drivers/net/netconsole.c |8 ++--
2 files changed, 8 insertions(+), 2
On 7/31/2012 9:22 PM, Stephen Warren wrote:
On 07/31/2012 09:46 AM, Vikram Narayanan wrote:
On 7/15/2012 10:53 PM, Stephen Warren wrote:
On 07/11/2012 02:37 PM, Vikram Narayanan wrote:
Driver for BCM2835 SoC. This gives the basic functionality of
setting/clearing the output.
diff --git
On Mon, Jul 30, 2012 at 7:06 PM, Tom Rini tr...@ti.com wrote:
On Sat, Jul 28, 2012 at 01:19:31PM +0200, Javier Martinez Canillas wrote:
IGEP-based boards can have two different flash memories, a OneNAND or a
NAND device.
Since u-boot still lacks of a device model to be the able to look at
On 07/31/2012 03:27 AM, Simon Glass wrote:
On Thu, Jul 12, 2012 at 4:25 PM, Simon Glass s...@chromium.org wrote:
Add LCD definitions and also a proposed binding for LCD displays.
The PWM is as per what will likely be committed to linux-next soon.
The displaymode binding comes from a proposal
On 07/31/2012 10:40 AM, Stephen Warren wrote:
On 07/31/2012 12:21 AM, Thierry Reding wrote:
In order for cache invalidation and flushing to work properly, the data
and OOB buffers must be aligned to full cache lines.
Signed-off-by: Thierry Reding thierry.red...@avionic-design.de
You
On 07/31/2012 10:59 AM, Tom Warren wrote:
Scott,
-Original Message-
From: Scott Wood [mailto:scottw...@freescale.com]
Sent: Monday, July 30, 2012 4:01 PM
To: Stephen Warren
Cc: Tom Warren; Simon Glass; U-Boot Mailing List; Stephen Warren
Subject: Re: [PATCH] env_nand: align NAND
On 07/31/2012 12:37 AM, Lukasz Majewski wrote:
Support for u-boot's dfu interface dev [list] command.
+U_BOOT_CMD(dfu, CONFIG_SYS_MAXARGS, 1, do_dfu,
+ Device Firmware Upgrade,
+ interface dev [list]\n
+ - device firmware upgrade on a device dev\n
+ attached to
Am 31.07.2012 11:01, schrieb Jamie Lentin:
On Mon, 30 Jul 2012, Prafulla Wadaskar wrote:
-Original Message-
From: Jamie Lentin [mailto:j...@lentin.co.uk]
Sent: 31 July 2012 03:26
To: u-boot@lists.denx.de
Cc: Prafulla Wadaskar; albert.u.b...@aribaud.net;
ub...@lukaperkov.net; Jamie
1 - 100 of 174 matches
Mail list logo