From: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
* remove mature defines from board config
Signed-off-by: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
---
include/configs/eb_cpux9k2.h | 4
1 file changed, 4 deletions(-)
diff --git a/include/configs/eb_cpux9k2.h b
CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN))
-#endif
#elif defined(CONFIG_MCF52x2)
#include asm/m5282.h
#ifndef VCBITMASK
Acked-by: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de
Am 30.10.2013 11:39, schrieb Andreas Bießmann:
Hi Bo,
+Jens, he did the rewrite of the at91 gpio driver.
I think this is a job for gpio_is_valid() then. How is this case handled
in kernel?
Here are a few things to discuss. First of all I'd like to get some
insights why the at91 gpio
From: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
Since more functions are enabled, the eb_cpux9k2_ram target does not boot.
This patch changed the TEXT_BASE, that the code fits between TEXT_BASE and ram
end.
Signed-off-by: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
Hello Heiko,
Am 2013-10-14 07:51, schrieb Heiko Schocher:
Hello Jens,
Am 24.09.2013 09:41, schrieb Jens Scharsig:
Hello Heiko,
Hello Jens,
I have a access violation problem with i2c_reloc_fixup on coldfire
m68k systems.
I found out, the i2c_reloc_fixup tries to relocate the adapter
From: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
NoMMU systems have a access violation problem with i2c_reloc_fixup.
Blame for it is a double relocation of the adapter itself. The
i2c_adap_p is already relocated, if i2c_reloc_fixup is called.
This patch removes the relocation
Hello Arvid,
you don't need change start.s to boot from NOR.
If shold set the #define CONFIG_SYS_TEXT_BASE 0x
But that's just the thing, I *do* need this change for the board to boot.
CONFIG_SYS_TEXT_BASE is 0x1000 (this is the base address for the flash
memory).
YES and
Hello Arvid,
Am 2013-10-09 21:23, schrieb Arvid Brodin:
Hi,
I managed to get u-boot-2012.10 to boot from NOR flash on a custom
at91rm9200 board by doing this:
Signed-off-by: Arvid Brodin arvid.bro...@xdin.com
---
arch/arm/cpu/arm920t/start.S | 8 +++-
2 files changed, 4
Hello Heiko,
Hello Jens,
I have a access violation problem with i2c_reloc_fixup on coldfire
m68k systems.
I found out, the i2c_reloc_fixup tries to relocate the adapter itself,
but at this time i2c_adap_p is already relocated.
Which toolchain?
m68k-elf-gcc (Sourcery CodeBench Lite
From: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
The malloc space is to small to boot, the current uboot 2013.10-rcX,
This will fix the startup problems by increasing the mallog space to 4MiB.
Signed-off-by: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
---
include/configs
Hello,
I have a access violation problem with i2c_reloc_fixup on coldfire
m68k systems.
I found out, the i2c_reloc_fixup tries to relocate the adapter itself,
but at this time i2c_adap_p is already relocated.
Can anybody confirm this?
I think also m68k, backfin and nds32 systems are affected
From: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
Since UBIFS is enabled for cpux9k2, more malloc space is needed.
For the current uboot 2013.10-rcX the size is to small, this will fix the
startup problems by increasing the mallog space to 4MiB.
Signed-off-by: Jens Scharsig (BuS
From: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
Since UBIFS is enabled for cpux9k2, more malloc space is needed.
For the current uboot 2013.10-rcX the size is to small, this will fix the
startup problems by increasing the mallog space.
Signed-off-by: Jens Scharsig (BuS Elektronik) e
Dear Andreas Bießmann:
are you sure 1MiB is enough? We had from time to time problems
initializing an unsafe closed UBI (about 512MiB). With 4MiB malloc arena
however we never had these problems.
Thank you for informations. To prevent future problems, I will send a
4MiB version (V2)
Dear Chuck Wical
usb start
fatload usb 0 $(loadaddr) rootfs.ext2.gz.uboot where loadaddr is the same
address used by tftp.
Your load address 0 is wrong. On AT91 systems addresses greater than
0x2010 should be used (RAM location).
Regards
jens
From: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
- fix adresses in env settings in config header
- add missing CONFIG_STANDALONE_LOAD_ADDR to eb_cpux9k2 config header
- remove jffs2 support, board doesn't use this anymore
- add ubifs support
- change sizes and start for partitions
/at91_gpio.c
+++ b/drivers/gpio/at91_gpio.c
@@ -1,5 +1,5 @@
/*
- * Memory Setup stuff - taken from blob memsetup.S
+ * Copyright (C) 2013 Bo Shen voice.s...@atmel.com
*
* Copyright (C) 2009 Jens Scharsig (js_at...@scharsoft.de)
*
Acked-by: Jens Scharsig js_at...@scharsoft.de
paste
+ * Copyright (C) 2013 Bo Shen voice.s...@atmel.com
*
* Copyright (C) 2009 Jens Scharsig (js_at...@scharsoft.de)
*
Best regards
Andreas Bießmann
Regards Jens
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de
From: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
- remove jffs2 support, board doesn't use this anymore
- add ubifs support
- change sizes and start for partitions
Signed-off-by: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
---
include/configs/eb_cpux9k2.h | 61
From: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
- remove jffs2 support, board doesn't use this anymore
- add ubifs support
- change sizes and start for partitions
Signed-off-by: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
---
sorry about this fast V2. localversion
Dear Nandakumar.
So, please share the SPLASH SCREEN image enable procedure for latest U-boot
(u-boot-2013.01.01.tar.bz2) source code for i.mx53loco.
I'm not familiar with imx53loco board. But I see Splash and BMP are enabled in
config.
So you need only burn you splash to flash and set the
Hello,
Am 2013-03-25 10:55, schrieb nandakumar.ramasw...@pricoltech.com:
Hello,
I would like to enable view the splash screen in U-Boot source
(u-boot-2009.08.tar.gz) code.
Please help me to come-out from this task.
Please read the U-Boot documentation
From: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
There is a debug call in board.c befor serial interface was initialized.
This moves the debug code behind serial_initialize call.
Signed-off-by: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
---
arch/m68k/lib/board.c |4
();
+
monitor_flash_len = (ulong)__init_end - dest_addr;
#if defined(CONFIG_NEEDS_MANUAL_RELOC)
Acked-by: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
Tested-by: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
___
U-Boot mailing list
U-Boot
of serial functions on m68k arch does not work correct.
we need the patch
http://patchwork.ozlabs.org/patch/201421/
in finale release
regards
Jens Scharsig
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Am 2012-12-14 22:52, schrieb Tom Rini:
In my TODO list in patchwork, nothing strikes me as new feature posted
before the merge window closed. I see a few bug fixes I might pull in,
or might sit on to make sure they don't cause surprises. It's of course
possible I missed something, or
From: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
* By a sequence of unfavorable conditions in the config header file, the
eb_cpu5282
booting from internal stopped after relocation. Blame it is a faulty value of
CONFIG_SYS_MONITOR_BASE. This patch fix this by replace the wrong
From: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
if a board uses the vcxk driver option CONFIG_SYS_VCXK_DOUBLEBUFFERD,
compilier shows warnings. This patch will fix it.
Signed-off-by: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
---
drivers/video/bus_vcxk.c |2 +-
1 file
From: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
- update clock settings for higher perfomance
- change standard baud rate to 115200
- fix flash base address
- remove unused defines
- add I2C support
- switch form board dependent flash to cfi
- remove board dependent flash code
- use
From: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
- update clock settings for higher perfomance
- change standard baud rate to 115200
- fix flash base address
- remove unused defines
- add I2C support
- switch form board dependent flash to cfi
- remove board dependent flash code
- use
From: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
* add CONFIG_SYS_CACHELINE_SIZE to eb_cpux9k2 board config header
* dissable dcache (CONFIG_SYS_DCACHE_OFF) for eb_cpux9k2
Signed-off-by: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
---
This patch is send in reqest of
http
From: Jens Scharsig js_at...@scharsoft.de
* add ram target for EB+CPUx9k2 board (eb_cpux9k2_ram_config)
Signed-off-by: Jens Scharsig js_at...@scharsoft.de
Signed-off-by: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
---
fix code styling
boards.cfg |3 ++-
include
Dear Andreas Bießmann,
Please could you also apply this open patch.
sorry, this one slipped through. Please add some at91/atmel to the
subject line next time to get my attention.
Blame it on myself. I forgot the arch comment in subject
Best regards
Jens Scharsig
Dear Andreas Bießmann,
Please could you apply this open patch.
I've just tested this against the current atmel and master tree.
It works.
best regards
Jens Scharsig
* fix chip select initialization for frame buffer, this will be
increase frame buffer access speed
Signed-off-by: Jens
Dear Andreas Bießmann,
Please could you also apply this open patch.
I've just tested this against the current atmel and master tree.
Thanks
best regards
Jens Scharsig
Am 2012-04-29 20:01, schrieb Jens Scharsig:
* add ram target for EB+CPUx9k2 board (eb_cpux9k2_ram_config)
Signed-off
Am 2012-07-10 09:31, schrieb Wolfgang Denk:
Hi everybody,
this is to let you know that the v2012.07-rc1 prerelease is out.
Tested-by: Jens Scharsig e...@bus-elektronik.de
for boards maintained by myself (EB_MCF-EV123, eb_cpux9k2 and vl_ma2sc)
Best regards,
Jens Scharsig
From: Jens Scharsig js_at...@scharsoft.de
* rename board directory to eb_cpu5282
* rename EB+MCF-EV123_.*config to eb_cpu5282_.*config
* add Maintainer for EB+CPU5282 board
* rename prompt
Signed-off-by: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
---
MAINTAINERS
* fix chip select initialization for frame buffer, this will be
increase frame buffer access speed
Signed-off-by: Jens Scharsig js_at...@scharsoft.de
---
board/BuS/eb_cpux9k2/cpux9k2.c |6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/board/BuS/eb_cpux9k2/cpux9k2.c
* add ram target for EB+CPUx9k2 board (eb_cpux9k2_ram_config)
Signed-off-by: Jens Scharsig js_at...@scharsoft.de
---
boards.cfg |3 ++-
include/configs/eb_cpux9k2.h |5 +
2 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/boards.cfg b/boards.cfg
index
Please ignore this patch, it was send with misconfigured mail server
The resend
http://patchwork.ozlabs.org/patch/155739/
is the valid one.
Best regards
Jens Scharsig
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman
to push out April 21, 2012.
Tested-by: Jens Scharsig js_at...@scharsoft.de
for both boards (eb_cpux9k2 and EB_MCF-EV123) maintained by myself
Best regards,
Jens Scharsig
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u
Dear Marek Vasut,
Dear e...@bus-elektronik.de,
Am 2012-04-01 18:14, schrieb Marek Vasut:
Dear Jens Scharsig,
* add USB host support to eb_cpux9k2 board
Did you test this too?
Of course, I've test this with/against current RC1.
Ok, I can pick this up and push through my staging
Dear Marek Vasut,
Dear e...@bus-elektronik.de,
Am 2012-04-01 18:14, schrieb Marek Vasut:
Dear Jens Scharsig,
* add USB host support to eb_cpux9k2 board
Did you test this too?
Of course, I've test this with/against current RC1.
Ok, I can pick this up and push through my staging
don't know, but I have following theory:
Reinhard Meyer has accept the patch for long time for atmel tree. But
since Reinhard is busy, there are no pull requests or rebases from/to
atmel repository.
Best regards,
Jens Scharsig
___
U-Boot mailing list
U
* add USB host support to eb_cpux9k2 board
Signed-off-by: Jens Scharsig js_at...@scharsoft.de
---
include/configs/eb_cpux9k2.h | 14 ++
1 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
index 9046cf0..eb05e2a
with 2012.04-rc1.
But for full functionality, please apply patch:
http://patchwork.ozlabs.org/patch/104279/
Thanks and
Best regards,
Jens Scharsig
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Signed-off-by: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
---
board/atmel/at91sam9263ek/at91sam9263ek.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c
b/board/atmel/at91sam9263ek/at91sam9263ek.c
index 41ec752
Signed-off-by: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
---
include/configs/at91sam9263ek.h |8 ++--
1 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index 8399246..f02f245 100644
--- a/include
Fix: board doesn't boot from norflash
Fix: environment can't write to flash (end address/start address not on sector
boundary)
Signed-off-by: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
---
include/configs/at91sam9263ek.h |8 ++--
1 files changed, 6 insertions(+), 2
- watchdog timed out
mw.w $(copy_addr) 1;cp.b $(copy_addr) 1088 2
- watchdog not timed out
This patch adds an extra watchdog reset in front of flash ready check.
Signed-off-by: Jens Scharsig (BuS Elektronik) e...@bus-elektronik.de
---
drivers/mtd/cfi_flash.c |3 +++
1
This block i have stolen from at91sam9263 board.
and
snip
#define CONFIG_ETHADDR 00:4D:41:02:52:43 /* MA2SC */
/sinp
Can your teach me the right format for things like this?
Thanks
Jens Scharsig
___
U-Boot mailing list
U-Boot@lists.denx.de
* add support for board VL+MA2SC
* adds vl_ma2sc_config for standard NOR boot configuration
* adds vl_ma2sc_ram_config for RAM load configuration
Signed-off-by: Jens Scharsig e...@bus-elektronik.de
---
Changes since V1:
* remove dead targets from Makefile
* remove fantasy mac address from config
* add support for board VL+MA2SC
* adds vl_ma2sc_config for standard NOR boot configuration
* adds vl_ma2sc_ram_config for RAM load configuration
Signed-off-by: Jens Scharsig e...@bus-elektronik.de
---
MAINTAINERS |1 +
board/BuS/vl_ma2sc/Makefile | 54
board/BuS
Am 2011-11-10 14:15, schrieb Mahavir Prasad:
Hello All,
We have our new board and I am porting U-Boot on it. I am first trying to
get U-Boot's console. FT232R is populated on the board and I need to use it
for the showing the console.
I looked into u-boot/drivers/serial folder but could
* re-introduce the MACH_TYPE_XX for EB_CPUX9K2 board
Signed-off-by: Jens Scharsig js_at...@scharsoft.de
---
include/configs/eb_cpux9k2.h |2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
index 4324172
Am 30.10.2011 11:32, schrieb Albert ARIBAUD:
Hi Jens, Marek,
Le 30/10/2011 00:47, Marek Vasut a écrit :
* re-introduce the MACH_TYPE_XX for EB_CPUX9K2 board
Signed-off-by: Jens Scharsigjs_at...@scharsoft.de
---
include/configs/eb_cpux9k2.h |4
1 files changed, 4
Am 2011-10-31 08:46, schrieb Igor Grinberg:
Hi Jens,
@@ -41,6 +41,8 @@
#define CONFIG_MISC_INIT_R
#define CONFIG_BOARD_EARLY_INIT_F
+#define MACH_TYPE_EB_CPUX9K2 1977
+
While you are at it, probably, it will be a good time
to switch to the new standard and use the
* re-introduce the MACH_TYPE_XX for EB_CPUX9K2 board
Signed-off-by: Jens Scharsig js_at...@scharsoft.de
---
include/configs/eb_cpux9k2.h |2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
index 4324172
* re-introduce the MACH_TYPE_XX for EB_CPUX9K2 board
Signed-off-by: Jens Scharsig js_at...@scharsoft.de
---
include/configs/eb_cpux9k2.h |4
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
index 4324172
Am 2011-08-29 16:04, schrieb Ramonf:
Hi, I'm running uboot 1.3.4 on AT91SAM9M10EKES board. I'm trying to load BMP
into it, but I get
There is no valid bmp file at the given address when I'm running bmp info.
what I do is this:
$ tftp 1 tftpboot/ramon.bmp
$ bmp i 1
I checked
Dear Rajeev Rao Battu:
Hi,
I am working As RD engineer. Presently i am compiling u-boot.2011.03
and i am facing bit problem.following is the problem while compiling u-boot.
i am using cross compile tool chain. I am trying to compile for
AT91SAM9260/61 controller.
The AT91SAM9260/61
board is usable
again.
Any ideas how to fix this problem?
At91 boards are also affected.
Best regards
Jens Scharsig
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
board is usable
again.
Any ideas how to fix this problem?
At91 boards are also affected.
Best regards
Jens Scharsig
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Dear Wolfgang Denk:
Dear Jens Scharsig,
Arghhh. Line wrapped, too.
This is the last time I'm gonna fix your patches. PLEASE fix your
mailer!
Sorry about the trouble.
I have many times the word wrap will be deactivated. Our admin will
reset this option on each update.
On future patches i
* Fix: if using crc32 command watchdog timed out
* change function call crc32(..) to the watchdog save variant
crc_32_wd(..) to support watchdog reset
Signed-off-by: Jens Scharsig e...@bus-elektronik.de
---
common/cmd_mem.c |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff
* Fix: if using crc32 command watchdog timed out
* change function call crc32(..) to the watchdog-safe variant
crc_32_wd(..) to support watchdog reset
Signed-off-by: Jens Scharsig e...@bus-elektronik.de
---
common/cmd_mem.c |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff
* Fix: if using sha1 command watchdog timed out
* change function call sha1_csum(..) to the watchdog-safe variant
sha1_csum_wd(..) to support watchdog reset
Signed-off-by: Jens Scharsig e...@bus-elektronik.de
---
common/cmd_sha1sum.c |2 +-
1 files changed, 1 insertions(+), 1 deletions
* Fix: if using md5 command watchdog timed out
* change function call md5(..) to the watchdog-safe variant
md5_wd(..) to support watchdog reset
Signed-off-by: Jens Scharsig e...@bus-elektronik.de
---
common/cmd_md5sum.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git
Hello,
Am 2011-07-16 11:53, schrieb Albert ARIBAUD:
Hi Jens,
Le 05/07/2011 09:26, Jens Scharsig a écrit :
* Fix: if using crc32 command watchdog timed out
Signed-off-by: Jens Scharsige...@bus-elektronik.de
---
Nitpick: in addition to describing which issue the patch fixes, can you
This is a resend without modifications by mail client
Regards
Jens
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Am 2011-07-12 18:00, schrieb Reinhard Meyer:
Dear Jens Scharsig,
This is a resend without modifications by mail client
Should it be better to say: The referenced email is ... ;-)
Really? It seems the patch was completely omitted.. :)
Reinhard
Jens
Am 2011-07-11 13:10, schrieb u-b...@emk-elektronik.de:
Dear Jens Scharsig,
snip
The patch is correct but anything between me an you/list modifies the mails.
There are additional spaces in my file.
Until I found why the mta's adds. I have attache the patch as file.
Let me guess... using
Signed-off-by: Jens Scharsig js_at...@scharsoft.de
---
include/configs/eb_cpux9k2.h | 14 ++
1 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
index c4b1e65..b1fcec7 100644
--- a/include/configs/eb_cpux9k2.h
* add USB host support to eb_cpux9k2 board
Signed-off-by: Jens Scharsig js_at...@scharsoft.de
---
include/configs/eb_cpux9k2.h | 14 ++
1 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
index c4b1e65
Am 2011-07-10 14:37, schrieb Albert ARIBAUD:
Hi Jens,
Le 10/07/2011 11:14, Jens Scharsig a écrit :
* add USB host support to eb_cpux9k2 board
Signed-off-by: Jens Scharsig js_at...@scharsoft.de
---
include/configs/eb_cpux9k2.h | 14 ++
1 files changed, 14 insertions(+), 0
Am 10.07.2011 14:37, schrieb Albert ARIBAUD:
Hi Jens,
Le 10/07/2011 11:14, Jens Scharsig a écrit :
* add USB host support to eb_cpux9k2 board
Signed-off-by: Jens Scharsigjs_at...@scharsoft.de
---
include/configs/eb_cpux9k2.h | 14 ++
1 files changed, 14 insertions(+), 0 deletions
This patch is obsolete since 2011.06
regards
Jens Scharsig
* Add CONFIG_AT91FAMILY to AT91RM9200 arch
Signed-off-by: Jens Scharsig js_at...@scharsoft.de
---
This will also fix brocken EB+CPUx9k2 board in Version 2011.03
arch/arm/include/asm/arch-at91/at91rm9200.h |2 +-
1
* Fix: if using crc32 command watchdog timed out
Signed-off-by: Jens Scharsig e...@bus-elektronik.de
---
common/cmd_mem.c |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index a5576aa..4daa1b3 100644
--- a/common/cmd_mem.c
+++ b
Am 2011-07-03 23:06, schrieb Albert ARIBAUD:
Hi Jens,
Le 30/06/2011 11:51, Jens Scharsig a écrit :
Am 2011-06-30 10:54, schrieb Reinhard Meyer:
PS: for better readability of Submitter it would be nice
to have real names with the e-Mail address ;)
Dear Reinhard Meyer,
sorry about
Am 2011-06-30 10:54, schrieb Reinhard Meyer:
PS: for better readability of Submitter it would be nice
to have real names with the e-Mail address ;)
Dear Reinhard Meyer,
sorry about this. I used a different computer than usual to create this
patch.
Best regards
Jens Scharsig
* add ATMEL_PMC_UHP define to at91sam9261/63 header
Signed-off-by: Jens Scharsig js_at...@scharsoft.de
---
arch/arm/include/asm/arch-at91/at91sam9261.h |1 +
arch/arm/include/asm/arch-at91/at91sam9263.h |1 +
2 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/arch/arm
Am 08.06.2011 22:10, schrieb Andreas Bießmann:
This patch enables the new clock features from new libat91-common. This
is a required step to get at91rm9200_usart replaced by atmel_usart
driver.
Signed-off-by: Andreas Bießmannandreas.de...@googlemail.com
Cc: Jens
Am 12.06.2011 13:49, schrieb Andreas Bießmann:
Signed-off-by: Andreas Bießmannandreas.de...@googlemail.com
CC: Jens Scharsigjs_at...@scharsoft.de
---
board/BuS/eb_cpux9k2/cpux9k2.c |7 +++
include/configs/eb_cpux9k2.h |6 --
2 files changed, 11 insertions(+), 2
by `.depend'. Stop.
make[1]: Leaving directory
`/home/scharsig/projects/CPUx9K2/u-boot/arch/arm/cpu/arm920t/at91'
make: *** [arch/arm/cpu/arm920t/at91/libat91.o] Error 2
Is it possible that the patch is incomplete
or is an additional patch needed
Best regards
Jens Scharsig
anything in
arm920t/at91rm9200. Please convert your board to use arm920t/at91 soc.
See at91rm9200ek or eb_cpux9k2 for an example.
Best regards
Jens Scharsig
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Am 06.06.2011 08:35, schrieb Reinhard Meyer:
Dear Jens Scharsig,
can you apply this patch to current atmel_rework 110411.
The eb_cpux9k2 board runs with this patch.
The at91rm9200_ek has compiled without error's.
Applied to u-boot-atmel. I am running MAKEALL at91 right now.
Best Regards
Russ graeme.r...@gmail.com
---
checkpatch complains about long lines and brace usage in the board specific
flash.c files - They are deprecated and not worth fixing for style
board/BuS/EB+MCF-EV123/flash.c | 10 ++
Ack, for EB+MCF-EV123 board
Best regards
Jens Scharsig
Russ graeme.r...@gmail.com
for EB+MCF-EV123 board
Acked-by: Jens Scharsig e...@bus-elektronik.de
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hello,
please apply the following patch
http://patchwork.ozlabs.org/patch/83703/
this will make at91rm9200ek and eb_cpux9k2 board work with current release.
This patch also fix the broken arm/920t/at91 arch since last merge with
arm custodian tree.
Best regards
Jens Scharsig
Hello Stefan Roese,
Hello,
since AT91: fix timer.c - remove reset_timer()
http://git.denx.de/?p=u-boot/u-boot-atmel.git;a=commit;h=cfff263f41e32c7ba2ee9162a8cc6423eb5a8390
was commited the arm926ejs/at91 boards can't compile with cfi_flash support:
u-boot/drivers/mtd/cfi_flash.c:576:
c
Best regards
Jens Scharsig
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Dear Reinhard Meyer,
can you apply this patch to current atmel_rework 110411.
The eb_cpux9k2 board runs with this patch.
The at91rm9200_ek has compiled without error's.
Best regards
Jens Scharsig
___
U-Boot mailing list
U-Boot@lists.denx.de
http
* Add CONFIG_AT91FAMILY to AT91RM9200 arch
Signed-off-by: Jens Scharsig js_at...@scharsoft.de
---
This will also fix brocken EB+CPUx9k2 board in Version 2011.03
arch/arm/include/asm/arch-at91/at91rm9200.h |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm
need this patch
http://lists.denx.de/pipermail/u-boot/2010-December/084133.html
regards
Jens Scharsig
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
* convert at91rm9200ek and eb_cpux9k2 board to ATMEL_xxx name scheme
* Fix: timer.c compile error io.h not found with arm/at91rm9200
* update arm920t/at91 to ATMEL_xxx name scheme
* update arm920t/at91 soc lib
* update at91_emac driver
Signed-off-by: Jens Scharsig js_at...@scharsoft.de
Am 11.02.2011 21:13, schrieb Wolfgang Denk:
Dear Reinhard Meyer,
In message 4d5597a8.9050...@emk-elektronik.de you wrote:
Dear Wolfgang Denk,
Dear Jens Scharsig,
In message4d5573ca.9000...@scharsoft.de you wrote:
* convert at91rm9200ek and eb_cpux9k2 board to ATMEL_xxx name scheme
Dear Andreas Bießmann,
I'm offline for the net 10 days. So I fast include your comments to a V2 patch
version
Am 11.02.2011 09:11, schrieb Andreas Bießmann:
Dear Jens Scharsig,
Am 10.02.2011 um 20:31 schrieb Jens Scharsig:
* update arm920t/at91 to ATMEL_xxx name scheme
* convert
* convert at91rm9200ek and eb_cpux9k2 board to ATMEL_xxx name scheme
* Fix: timer.c compile error io.h not found with arm/at91rm9200
* update arm920t/at91 to ATMEL_xxx name scheme
* update arm920t/at91 soc lib
* update at91_emac driver
Signed-off-by: Jens Scharsig js_at...@scharsoft.de
* update arm920t/at91 to ATMEL_xxx name scheme
* convert at91rm9200ek and eb_cpux9k2 board to ATMEL_xxx name scheme
* update arm920t/at91 soc lib
* update at91_emac driver
Signed-off-by: Jens Scharsig js_at...@scharsoft.de
---
The eb_cpux9k2 board can compile and runs after patch changes
* Fix: timer.c compile error io.h not found with arm/at91rm9200
Signed-off-by: Jens Scharsig js_at...@scharsoft.de
---
arch/arm/cpu/arm920t/at91/timer.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/cpu/arm920t/at91/timer.c
b/arch/arm/cpu/arm920t/at91
1 - 100 of 240 matches
Mail list logo
