Dear Trent Piepho,
In message [EMAIL PROTECTED] you wrote:
The boot page and reset vector need to be at the absolute address
0xf000 and 0xfffc, respectively, when the CPU boots.
...
To handle to both different U-Boot image sizes and flash locations, what we
do is take the upper bits
On Tue, 14 Oct 2008, Wolfgang Denk wrote:
In message [EMAIL PROTECTED] you wrote:
The boot page and reset vector need to be at the absolute address
0xf000 and 0xfffc, respectively, when the CPU boots.
...
To handle to both different U-Boot image sizes and flash locations, what we
do
Dear Trent,
in message [EMAIL PROTECTED] you wrote:
This data doesn't exist in the board config file. The linker scripts already
in effect contain this data. I have a calculation that uses the flash bank
size. What's there now is the result of a calculation that uses the flash
bank size.
On Tue, 14 Oct 2008, Wolfgang Denk wrote:
Dear Trent,
in message [EMAIL PROTECTED] you wrote:
This data doesn't exist in the board config file. The linker scripts already
in effect contain this data. I have a calculation that uses the flash bank
size. What's there now is the result of a
The boot page and reset vector need to be at the absolute address
0xf000 and 0xfffc, respectively, when the CPU boots.
However, their location in the U-Boot image is relative to the address that
flash is mapped at. For instance, mpc8572ds maps the 128MB flash boot bank
to 0xe800,
5 matches
Mail list logo
