On Thursday, August 26, 2010 01:57:23 Reinhard Meyer wrote:
Dear Mike Frysinger,
#if defined(CONFIG_SPI_FRAM_RAMTRON)
# define IDCODE_LEN 10
#else
# define IDCODE_LEN 5
#endif
OK, see below. Can't we have it 10 generally? The impact should be
negligible?
hrm, i guess ... but i
Dear Mike Frysinger,
From: Reinhard Meyeri...@emk-elektronik.de
Give me a tip how I can change that info. The first patch to this was
committed while I used info. Squashing other patches into it does not
change that. rebase -i, edit, --amend does not present that line for
edit. The only idea I
Dear Mike Frysinger,
#if defined(CONFIG_SPI_FRAM_RAMTRON)
# define IDCODE_LEN 10
#else
# define IDCODE_LEN 5
#endif
OK, see below. Can't we have it 10 generally? The impact should be
negligible?
hrm, i guess ... but i didnt even really like raising it to the 5 for one
specific family
Hello Albert,
Albert Aribaud wrote:
This driver is for the Marvell TWSI/I2C module found in
the orion and kirkwood families among others.
Signed-off-by: Albert Aribaud albert.arib...@free.fr
---
While the 'kirkwood_i2c' driver for the Marvell TWSI module
is already available in u-boot,
On Thursday, August 26, 2010 02:19:07 Reinhard Meyer wrote:
From: Reinhard Meyeri...@emk-elektronik.de
Give me a tip how I can change that info. The first patch to this was
committed while I used info. Squashing other patches into it does not
change that. rebase -i, edit, --amend does not
(adding Heiko, custodian of I2C/EEPROM and committer of kirkwood_i2c)
Le 26/08/2010 06:33, Prafulla Wadaskar a écrit :
-Original Message-
From: u-boot-boun...@lists.denx.de
[mailto:u-boot-boun...@lists.denx.de] On Behalf Of Albert Aribaud
Sent: Wednesday, August 25, 2010 7:54 PM
Hello Reinhard,
Reinhard Meyer wrote:
Signed-off-by: Reinhard Meyer u-b...@emk-elektronik.de
---
common/cmd_i2c.c | 17 +++--
1 files changed, 7 insertions(+), 10 deletions(-)
Thanks for detecting this.
Applied to u-boot-i2c.git
bye,
Heiko
--
DENX Software Engineering GmbH,
Hello Wolfgang,
The following changes since commit bd2313078114c4b44c4a5ce149af43bcb7fc8854:
Wolfgang Denk (1):
Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
Nishanth Menon (3):
Le 26/08/2010 08:30, Heiko Schocher a écrit :
As the kirkwood_i2c driver is actually not used in any board,
we should remove it completely, can you add this for v2?
That answers the questions I *just* asked on the list :) -- Wilco.
Beside of that, I have just some minor codstyling comments:
Dear Mike Frysinger,
From: Reinhard Meyeri...@emk-elektronik.de
Give me a tip how I can change that info. The first patch to this was
committed while I usedinfo. Squashing other patches into it does not
change that. rebase -i, edit, --amend does not present that line for
edit. The only idea
Hello Albert,
Albert ARIBAUD wrote:
(adding Heiko, custodian of I2C/EEPROM and committer of kirkwood_i2c)
Le 26/08/2010 06:33, Prafulla Wadaskar a écrit :
-Original Message-
From: u-boot-boun...@lists.denx.de
[mailto:u-boot-boun...@lists.denx.de] On Behalf Of Albert Aribaud
Sent:
On Thursday, August 26, 2010 02:41:56 Reinhard Meyer wrote:
From: Reinhard Meyeri...@emk-elektronik.de
Give me a tip how I can change that info. The first patch to this was
committed while I usedinfo. Squashing other patches into it does not
change that. rebase -i, edit, --amend does
and cleaned up error messages and help,
removed pointless debug() call.
Signed-off-by: Reinhard Meyer u-b...@emk-elektronik.de
---
common/cmd_spi.c | 40 +---
1 files changed, 25 insertions(+), 15 deletions(-)
diff --git a/common/cmd_spi.c
-Original Message-
From: Heiko Schocher [mailto:h...@denx.de]
Sent: Thursday, August 26, 2010 12:17 PM
To: Albert ARIBAUD
Cc: Prafulla Wadaskar; u-boot@lists.denx.de; Heiko Schosher;
Ashish Karkare; Prabhanjan Sarnaik
Subject: Re: [U-Boot] [PATCH 1/2] I2C: add Marvell TWSI
Dear Mike,
1. looking at spi_flash.c, shall I add the standard copyright,
keeping atmel as author?
2. I can find the following lengths of idcode used:
atmel 2
macronix 3
ramtron 9
spansion 5
sst 3
stmicro 4
winbond 3
Do you really want to flexify this? Even before relocation 5 bytes
more on
Dear C Nauman,
On 25 August 2010 03:18, C Nauman cnau...@diagraph.com wrote:
Minkyu,
remove it.
please write the commit msg only.
- This patch adds generic support for the Samsung s3c2440 processor.
Started from patch posted by Kevin Morfitt.
- v2 Changed struct members to lower case
On 23 August 2010 20:01, Minkyu Kang mk7.k...@samsung.com wrote:
Use the same configuration around S5P SoCs.
(s5pc100, s5pc110, s5pc210 and so on)
Signed-off-by: Minkyu Kang mk7.k...@samsung.com
---
common/serial.c | 4 ++--
drivers/gpio/Makefile | 2 +-
On 24 August 2010 16:50, Minkyu Kang mk7.k...@samsung.com wrote:
New line is unnecessary at last line of macro.
Signed-off-by: Minkyu Kang mk7.k...@samsung.com
---
arch/arm/include/asm/arch-s5pc1xx/cpu.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
applied to u-boot-samsung
Hi Mike,
On Monday, August 23, 2010 17:03:24 Detlev Zundel wrote:
Hi Stefan,
On Monday 23 August 2010 17:55:44 Stefano Babic wrote:
I am also adding support for S25FL032P chips to the spansion driver.
Will post a patch later.
I have seen. However, it should be better if you send
On Thursday, August 26, 2010 04:27:36 Reinhard Meyer wrote:
1. looking at spi_flash.c, shall I add the standard copyright,
keeping atmel as author?
doesnt matter to me
2. I can find the following lengths of idcode used:
atmel 2
macronix 3
ramtron 9
spansion 5
sst 3
stmicro 4
winbond 3
On Thursday, August 26, 2010 04:57:27 Reinhard Meyer wrote:
and cleaned up error messages and help,
removed pointless debug() call.
this looks good to me. i'll give it a spin on my hardware when i get a
chance, and pull into my sf tree so it doesnt get lost.
-mike
signature.asc
Description:
Le 26/08/2010 10:23, Prafulla Wadaskar a écrit :
We use only soft i2c on this board, so please remove the
kirkwood_i2c.c
driver completely. So we have only your driver in tree, which
is used and
working.
Ack.
Regards..
Prafulla . .
Wilco. As a safety and cleanliness measure, I'll
This file is not used, automatically generated u-boot.lds is used instead
Signed-off-by: Mikhail Kshevetskiy mikhail.kshevets...@gmail.com
---
board/vpac270/u-boot.lds | 55 --
1 files changed, 0 insertions(+), 55 deletions(-)
delete mode 100644
* CONFIG_SYS_CLKS_IN_HZ is not used anywhere, so removing it
* CONFIG_SYS_HZ is set to 1000 on most architectures, so it
seems to be the safe default
Signed-off-by: Mikhail Kshevetskiy mikhail.kshevets...@gmail.com
---
include/configs/vpac270.h |3 +--
1 files changed, 1 insertions(+), 2
Signed-off-by: Mikhail Kshevetskiy mikhail.kshevets...@gmail.com
---
include/configs/vpac270.h |3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h
index d3e22d9..e31b08a 100644
--- a/include/configs/vpac270.h
+++
Signed-off-by: Mikhail Kshevetskiy mikhail.kshevets...@gmail.com
---
board/vpac270/vpac270.c |2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/board/vpac270/vpac270.c b/board/vpac270/vpac270.c
index 18e47e2..2f29cf4 100644
--- a/board/vpac270/vpac270.c
+++
it is not required and not recommended.
Signed-off-by: Mikhail Kshevetskiy mikhail.kshevets...@gmail.com
---
include/configs/vpac270.h |2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h
index d3e805a..c8663e8 100644
---
Define MONITOR_BASE on the base of used flash type. Define ENV_ADDR as
MONITOR_BASE + MONITOR_LEN. Fix environment sector size (NOR: 32Kb for
first four sectors and 128Kb for other; OneNAND: 128Kb).
Last but not least: we have MONITOR_LEN = 0x4, one sector for environment
and one sector for
it looks like u-boot allocates a buffer of CONFIG_ENV_SECT_SIZE
size when making saveenv command. In our case CONFIG_ENV_SECT_SIZE
is 128Kb, so having CONFIG_SYS_MALLOC_LEN = (128Kb + space for
environment) is not sufficient.
Increase CONFIG_SYS_MALLOC_LEN to (196Kb + space for environment) to
it looks like 4Kb for environment and 64Kb for stack is sufficient
Signed-off-by: Mikhail Kshevetskiy mikhail.kshevets...@gmail.com
---
include/configs/vpac270.h |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h
Dear All,
After erasing the data flash, NAnd flash and installing the Bootstrap
loader and U-Boot, the problem is solved. I have a U-Boot prompt using which I
should be able to proceed further.
Before building the Linux kernel and file system, I want to experiment with
prebuilt images
This board have only one CFI flash actually, so fix it in config.
PS: This patch should not go upstream at this point as it specific
to my revision of voipac
Signed-off-by: Mikhail Kshevetskiy mikhail.kshevets...@gmail.com
---
include/configs/vpac270.h |4 ++--
1 files changed, 2
The board have only 128 Mb of memory and only two first memory banks are used.
Also remove unneeded CONFIG_SYS_DRAM_SIZE constant and set default load address
to be in sdram.
PS: This patch should not go upstream at this point as it specific
to my revision of voipac
Signed-off-by: Mikhail
WARNING: This macro do not assume the values for K0DB4, KxDB2, KxFREE,
K1RUN, K2RUN and APD bits of CONFIG_SYS_MDREFR_VAL as it was
done early on many pxa platforms. All pxa developers that plan
to use this macro should check the validity of their MDREFR values.
v1:
*
Dne Čt 26. srpna 2010 12:48:00 Mikhail Kshevetskiy napsal(a):
Define MONITOR_BASE on the base of used flash type. Define ENV_ADDR as
MONITOR_BASE + MONITOR_LEN. Fix environment sector size (NOR: 32Kb for
first four sectors and 128Kb for other; OneNAND: 128Kb).
Last but not least: we have
Dne Čt 26. srpna 2010 12:48:01 Mikhail Kshevetskiy napsal(a):
it is not required and not recommended.
If CONFIG_ENV_OVERWRITE is #defined in your config
file, the write protection for vendor parameters is
completely disabled. Anybody can change or delete
these parameters.
I think that's ok.
Dne Čt 26. srpna 2010 12:48:02 Mikhail Kshevetskiy napsal(a):
it looks like 4Kb for environment and 64Kb for stack is sufficient
Wolfgang, what's your opinion?
Thanks
Signed-off-by: Mikhail Kshevetskiy mikhail.kshevets...@gmail.com
---
include/configs/vpac270.h |4 ++--
1 files
Dne Čt 26. srpna 2010 12:48:03 Mikhail Kshevetskiy napsal(a):
it looks like u-boot allocates a buffer of CONFIG_ENV_SECT_SIZE
size when making saveenv command. In our case CONFIG_ENV_SECT_SIZE
is 128Kb, so having CONFIG_SYS_MALLOC_LEN = (128Kb + space for
environment) is not sufficient.
Dne Čt 26. srpna 2010 12:55:44 Mikhail Kshevetskiy napsal(a):
This board have only one CFI flash actually, so fix it in config.
PS: This patch should not go upstream at this point as it specific
to my revision of voipac
This is a PRO module, right? I got my hands on one and support for
Dne Čt 26. srpna 2010 12:55:45 Mikhail Kshevetskiy napsal(a):
The board have only 128 Mb of memory and only two first memory banks are
used. Also remove unneeded CONFIG_SYS_DRAM_SIZE constant and set default
load address to be in sdram.
PS: This patch should not go upstream at this point as
This code was referencing the wrong register, and only
happened to work because the DRAM on both users of this
code happened to be a single bank located at address 0.
Signed-off-by: Rogan Dawes ro...@dawes.za.net
---
Prafulla, according to Albert, this code was copied from
the Kirkwood code,
Michal Simek wrote:
Emaclite was using old net api that's why
this patch move emaclite to NET_MULTI api.
Signed-off-by: Michal Simek mon...@monstr.eu
Ben: any comment on this patch?
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux
Michal Simek wrote:
Add Xilinx LL Temac driver to u-boot.
Signed-off-by: Michal Simek mon...@monstr.eu
Ben: any comment on this patch?
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux -
Dne Čt 26. srpna 2010 12:55:46 Mikhail Kshevetskiy napsal(a):
WARNING: This macro do not assume the values for K0DB4, KxDB2, KxFREE,
K1RUN, K2RUN and APD bits of CONFIG_SYS_MDREFR_VAL as it was
done early on many pxa platforms. All pxa developers that plan
to use
Dne St 25. srpna 2010 11:03:30 StephenPaulraj Chinnadurai-ERS,HCLTech napsal(a):
Hello Marek,
I increased the memory clock speed from 104 MHz to 208 MHz in the PXA270
controller by including the following lines of in the .macro
pxa_clock_setup (macro.h file)
ldr r0, =0x8
On 2010/08/16 7:47 AM, Rogan Dawes wrote:
From: Rogan Dawes ro...@dawes.za.net
Some SATA controllers can operate in an IDE compatible mode (e.g. mvsata)
but will only ever have a single device per bus.
This allows the upcoming DNS323 port to properly identify and use
a drive on both SATA
-Original Message-
From: Marek Vasut [mailto:marek.va...@gmail.com]
Sent: Thursday, August 26, 2010 5:56 PM
To: StephenPaulraj Chinnadurai-ERS,HCLTech
Cc: u-boot@lists.denx.de; Wolfgang Denk
Subject: Re: [U-Boot] TFTP timeout issue while downloading the linux kernel in
openpxa vpac270
This patch fixes a bug in reconfigure_pll(), where the detection of
the current bootstrap option is wrong. The ICS bits where incorrectly
shifted. This bug was found on the lwmon5 board, which uses bootstrap
option H (I2C bootstrap EEPROM).
Additionally a bit of code was moved into the if
Dne Čt 26. srpna 2010 17:06:08 StephenPaulraj Chinnadurai-ERS,HCLTech napsal(a):
-Original Message-
From: Marek Vasut [mailto:marek.va...@gmail.com]
Sent: Thursday, August 26, 2010 5:56 PM
To: StephenPaulraj Chinnadurai-ERS,HCLTech
Cc: u-boot@lists.denx.de; Wolfgang Denk
Subject: Re:
Hi Stefan,
This patch fixes a bug in reconfigure_pll(), where the detection of
the current bootstrap option is wrong. The ICS bits where incorrectly
shifted. This bug was found on the lwmon5 board, which uses bootstrap
option H (I2C bootstrap EEPROM).
Additionally a bit of code was moved
On Mon, Aug 09, 2010 at 04:43:58PM -0400, Ben Gardiner wrote:
diff --git a/common/cmd_mtdparts.c b/common/cmd_mtdparts.c
index 772ad54..500a38e 100644
--- a/common/cmd_mtdparts.c
+++ b/common/cmd_mtdparts.c
@@ -1215,18 +1215,65 @@ static int generate_mtdparts_save(char *buf, u32
buflen)
it looks like u-boot allocates a buffer of CONFIG_ENV_SECT_SIZE
size when making saveenv command. In our case CONFIG_ENV_SECT_SIZE
is 128Kb, so having CONFIG_SYS_MALLOC_LEN = 128Kb is not sufficient.
Increase CONFIG_SYS_MALLOC_LEN to (196Kb + space for environment) to
resolve a problem.
v2:
Define ENV_ADDR as MONITOR_BASE + MONITOR_LEN. Fix environment sector
size (NOR: 32Kb for first four sectors and 128Kb for other; OneNAND: 128Kb).
Last but not least: we have MONITOR_LEN = 0x4 and one sector for
environment (size = 0x2), so the kernel may start from 0x0006 only.
v2:
Signed-off-by: Mikhail Kshevetskiy mikhail.kshevets...@gmail.com
---
include/configs/vpac270.h |3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h
index 694a8f9..1e4d4c5 100644
--- a/include/configs/vpac270.h
+++
pxa_mem_setup macro use r6 to store CONFIG_SYS_MDREFR_VAL during memory
initialization. This reg is modified during execution of pxa_wait_ticks.
Later we use r6 to setup MDREFR[APD] bit. As result MDREFR[APD] is always
zero.
Signed-off-by: Mikhail Kshevetskiy mikhail.kshevets...@gmail.com
---
* CONFIG_SYS_CLKS_IN_HZ is not used anywhere, so removing it
* CONFIG_SYS_HZ is set to 1000 on most architectures, so it
seems to be the safe default
v2: rebased against for-wd-master branch
Signed-off-by: Mikhail Kshevetskiy mikhail.kshevets...@gmail.com
---
include/configs/vpac270.h |3
This file is not used, automatically generated u-boot.lds is used instead
Signed-off-by: Mikhail Kshevetskiy mikhail.kshevets...@gmail.com
---
board/vpac270/u-boot.lds | 55 --
1 files changed, 0 insertions(+), 55 deletions(-)
delete mode 100644
it looks like 4Kb for environment and 64Kb for stack is sufficient
v2: rebased against for-wd-master branch
Signed-off-by: Mikhail Kshevetskiy mikhail.kshevets...@gmail.com
---
include/configs/vpac270.h |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git
WARNING: This macro do not assume the values for K0DB4, KxDB2, KxFREE,
K1RUN, K2RUN and APD bits of CONFIG_SYS_MDREFR_VAL as it was
done early on many pxa platforms. All pxa developers that plan
v1:
* strict following to section 6.4.10 of Intel PXA27xx Developer's Manual.
*
Dear Mike,
I have been looking at the possible solutions quite some time now,
the issue is rather complex:
1. according to Ramtron, 0x7f is a continuation byte defined in a
JEDEC standard (I could not find a spec for that), and shall be
ignored until a non-0x7f shows. That shall be Manufacturer
The Freescale MPC8610 DIU code has its own bitmap-drawing function,
fsl_diu_display_bmp(), which is redundant. Instead, use the existing function
video_display_bitmap(). Replacing fsl_diu_display_bmp() with
video_display_bitmap() also requires refactoring the DIU initialization code.
On Mon, Aug 09, 2010 at 04:43:59PM -0400, Ben Gardiner wrote:
+static void spread_partition(struct mtd_info *mtd, struct part_info *part,
+ u32 *next_offset)
As in patch 2, change u32 to uint64_t.
+{
+ if (!mtd-block_isbad)
+
From: Tirumala Marri tma...@apm.com
This patch adds Universal Interrupt Controller support for
APM82XXX processor.
Signed-off-by: Tirumala R Marri tma...@apm.com
---
arch/powerpc/include/asm/ppc4xx-uic.h |5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)
diff --git
From: Tirumala Marri tma...@apm.com
Add bluestone board name to the board.cfg.
Change Makefile to include bluestone board support.
Modified MAINTAINERS file to include board maintainers name.
Modified to include blouestone entry in the MAKEALL file.
Signed-off-by: Tirumala R Marri
From: Tirumala Marri tma...@apm.com
This patch adds L2Cache/SRAM and OCM register definitions.
Signed-off-by: Tirumala R Marri tma...@apm.com
---
arch/powerpc/include/asm/ppc4xx-isram.h |8 +---
1 files changed, 5 insertions(+), 3 deletions(-)
diff --git
From: Tirumala Marri tma...@apm.com
This patch adds support for speed calculations for different
IP blocks, based on the bootstrap values programmed into EPROM device.
Signed-off-by: Tirumala R Marri tma...@apm.com
---
arch/powerpc/cpu/ppc4xx/speed.c | 85
From: Tirumala Marri tma...@apm.com
This patch adds 32bit DDR2 static as well as dynamic
setting of different DRAM parameters like CAS and read/write
delays.
Signed-off-by: Tirumala R Marri tma...@apm.com
---
arch/powerpc/include/asm/ppc4xx-sdram.h | 25 +++--
1 files
From: Tirumala Marri tma...@apm.com
Add support code for bluestone board wth APM82XXX processor based.
This patch includes early board init, misc init, configure EBC,
and initializes UIC.
Signed-off-by: Tirumala R Marri tma...@apm.com
---
arch/powerpc/include/asm/ppc4xx-ebc.h |4 +
From: Tirumala Marri tma...@apm.com
This patch adds APM82XXX specific definitions, which include
clock and boot strap.
Signed-off-by: Tirumala R Marri tma...@apm.com
---
include/ppc440.h | 57 -
include/ppc4xx.h |7 +++--
2 files
From: Tirumala Marri tma...@apm.com
APM8 is Applied Micro Circuits Corporations naming convention for new line
of SoCs.
Tirumala Marri (8):
APM82xxx: Add CPU support
APM82xxx: Add Common register definitions
APM82xxx: Add clock speed calculations
APM82xxx: Add DDR support
From: Tirumala Marri tma...@apm.com
APM82XXX is a new line of SoCs which are derivatives of
PPC44X family of processors. This patch adds support of CPU, cache,
tlb, 32k ocm, bootstraps, PLB and AHB bus.
Signed-off-by: Tirumala R Marri tma...@apm.com
---
arch/powerpc/cpu/ppc4xx/cpu.c|
Le 26/08/2010 08:30, Heiko Schocher a écrit :
Beside of that, I have just some minor codstyling comments:
Meanwhile, I've run checkpatch on this file and fixed every warning and
error, thus some of your comments were taken care of in the process.
That left:
+#define
On Mon, Aug 09, 2010 at 04:44:00PM -0400, Ben Gardiner wrote:
+#if defined(CONFIG_CMD_MTDPARTS_SPREAD)
+ s = strchr(argv[1], '.');
+
+ if (get_mtd_info(dev-id-type, dev-id-num, mtd))
+ return 1;
+#endif
+
if ((dev_tmp =
SUMMARY:
This patchset improves the driver for the Marvell TWSI interface found
on orion5x and kirkwood SoCs and adds I2C support to the orion5x-based
ED Mini V2 board. The mvtwsi driver is a complete rewrite, 50% shorter
in source code lines, 25% smaller in object size, much simpler and way
These are not used on this board, which uses soft I2C instead.
Signed-off-by: Albert Aribaud albert.arib...@free.fr
---
include/configs/km_arm.h |8
1 files changed, 0 insertions(+), 8 deletions(-)
diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h
index
This driver is not kirkwood-specific and can also be used
e.g. by orion5x. Rename to a SoC-neutral name.
Signed-off-by: Albert Aribaud albert.arib...@free.fr
---
drivers/i2c/Makefile |2 +-
drivers/i2c/{kirkwood_i2c.c = mvtwsi.c} |0
2 files changed, 1 insertions(+),
This rewrite of the mvtwsi driver is 25% smaller and much
faster and simpler than the previous code.
Signed-off-by: Albert Aribaud albert.arib...@free.fr
---
drivers/i2c/mvtwsi.c | 748 +++---
1 files changed, 341 insertions(+), 407 deletions(-)
diff
Signed-off-by: Albert Aribaud albert.arib...@free.fr
---
include/configs/edminiv2.h |9 +
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
index 57dd165..36ed392 100644
--- a/include/configs/edminiv2.h
+++
Signed-off-by: Albert Aribaud albert.arib...@free.fr
---
arch/arm/include/asm/arch-orion5x/cpu.h |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/include/asm/arch-orion5x/cpu.h
b/arch/arm/include/asm/arch-orion5x/cpu.h
index 80717f8..6ce02a9 100644
---
Hi list,
Le 24/08/2010 15:27, Albert Aribaud a écrit :
Fix orion5x_winctrl_calcsize() off-by-1 bug which caused mapping
windows to be cut by half. This afected all windows including NOR
flash (causing half the flash to be unaccessible) but DRAM was and
still is fine as its size is
The README.davinci in documentation folder is missing information
regarding DA850 which is a supported DaVinci device.
Add this information.
Signed-off-by: Sekhar Nori nsek...@ti.com
---
applies to latest of U-Boot mainline.
doc/README.davinci | 11 +++
1 files changed, 11
The TI DA850/OMAP-L138/AM18x EVM can be populated with devices
having different maximum allowed CPU clock rating.
The maximum clock the chip can support can only be determined from
the label on the package (not software readable).
Introduce a method to pass the maximum allowed clock rate
Hello Albert,
Albert ARIBAUD wrote:
Le 26/08/2010 08:30, Heiko Schocher a écrit :
Beside of that, I have just some minor codstyling comments:
Meanwhile, I've run checkpatch on this file and fixed every warning and
error, thus some of your comments were taken care of in the process.
That
Hello Albert,
Albert Aribaud wrote:
This rewrite of the mvtwsi driver is 25% smaller and much
faster and simpler than the previous code.
Signed-off-by: Albert Aribaud albert.arib...@free.fr
---
drivers/i2c/mvtwsi.c | 748
+++---
1 files
Le 27/08/2010 07:00, Chris Moore a écrit :
Hi list,
Hi Chris!
[...]
For range 0x to 0x Chris Moore's fast
orion5x_winctrl_calcsize returns 0x
[...]
For range 0x8001 to 0x Chris Moore's fast
orion5x_winctrl_calcsize returns 0x
AIUI (apart from the
Le 27/08/2010 07:37, Albert ARIBAUD a écrit :
I think your proposal to handle size 0 as meaning '4 MB'
That's 4 *TB*, of course. :)
Amicalement,
--
Albert.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
86 matches
Mail list logo
