On Tegra2, card-detection is implemented by passing the card-detection
GPIOs to the MMC driver at initialization time. Instead of implementing
the board_mmc_getcd() function, use the card-detect hook and allow
boards to override it by providing their own board_mmc_getcd()
implementation.
The new API no longer uses the extra cd parameter that was used to store
the card presence state. Instead, this information is returned via the
function's return value. board_mmc_getcd() returns -1 to indicate that
no card-detection mechanism is implemented; 0 indicates that no card is
present and
Check for card detect each time an MMC/SD device is initialized. If card
detection is not implemented, this code behaves as before and continues
assuming a card is present. If no card is detected, has_init is reset
for the MMC/SD device (to force initialization next time) and an error
is returned.
This card-detect hook probably doesn't work. Perhaps somebody with more
knowledge about the hardware can comment on this. I think that perhaps
even the complete code from esdhc_init() could go into the getcd()
function instead or mmc_getcd() needs to be called at some later time
after mmc_init(),
Although it is a single patch, I felt that a cover letter will
definetly not hurt here, also the patch version history is so big, so
I decided to move it here.
The ULPI (UTMI Low Pin (count) Interface) PHYs are widely used on
variety of boards. This requires a generic architecture independant
From: Jana Rapava ferma...@gmail.com
Add partial ULPI specification implementation that should be enough to
interface the ULPI PHYs in the boot loader context.
Add a viewport implementation for Chipidea/ARC based controllers.
Signed-off-by: Jana Rapava ferma...@gmail.com
Signed-off-by: Igor
The new API no longer uses the extra cd parameter that was used to store
the card presence state. Instead, this information is returned via the
function's return value. board_mmc_getcd() returns -1 to indicate that
no card-detection mechanism is implemented; 0 indicates that no card is
* Marek Vasut wrote:
The new API no longer uses the extra cd parameter that was used to store
the card presence state. Instead, this information is returned via the
function's return value. board_mmc_getcd() returns -1 to indicate that
no card-detection mechanism is implemented; 0
I have OMAP L138 Hawkboard which is loaded with some other program.
I am new to this hawkboard and tried to boot as per instructions from
user guide in http://www.hawkboard.org/ , system is not coming to
hawkboard.org to access command. It is coming as follows.
Please help me to make it ready.
Dear Robert,
In message alpine.DEB.2.02.1112042100270.15118@oneiric you wrote:
i believe i've solved this issue, at least. i downloaded ELDK 4.2
and installed the ppc_8xx- toolchain. with that, i managed to compile
u-boot 2010.12 and flashed it to my TQM860, reset and, lo and behold,
i
Hi Tom,
On Sat, Dec 3, 2011 at 6:49 AM, Christian Riesch
christian.rie...@omicron.at wrote:
Hi Tom,
Thanks for your comments.
On Friday, December 2, 2011, Tom Rini tr...@ti.com wrote:
On 12/02/2011 09:12 AM, Christian Riesch wrote:
[snip]
include/configs/da850evm.h | 87
On Mon, 5 Dec 2011, Wolfgang Denk wrote:
Dear Robert,
In message alpine.DEB.2.02.1112042100270.15118@oneiric you wrote:
i believe i've solved this issue, at least. i downloaded ELDK 4.2
and installed the ppc_8xx- toolchain. with that, i managed to compile
u-boot 2010.12 and flashed
On 05/12/2011 09:23, Thierry Reding wrote:
This card-detect hook probably doesn't work. Perhaps somebody with more
knowledge about the hardware can comment on this. I think that perhaps
even the complete code from esdhc_init() could go into the getcd()
The reason was only that the SDHC
ping!
This fixes a compile breakage and
IMO should be applied before 2011.12 is out.
Can someone, please apply it?
On 11/28/11 09:57, Igor Grinberg wrote:
When ENV_IS_EMBEDDED is not set, but CONFIG_BUILD_ENVCRC is set,
the environment.h file does not get included resulting in unrecognized
On 05/12/2011 11:00, Thierry Reding wrote:
* Marek Vasut wrote:
The new API no longer uses the extra cd parameter that was used
to store the card presence state. Instead, this information is
returned via the function's return value. board_mmc_getcd()
returns -1 to indicate that no
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Heiko Schocher h...@denx.de
Cc: Sandeep Paulraj s-paul...@ti.com
Cc: Tom Rini tr...@ti.com
Cc: Sudhakar Rajashekhara sudhakar@ti.com
---
board/davinci/da8xxevm/da850evm.c |4 +-
board/davinci/da8xxevm/u-boot-spl.lds |
Support for variable length images like AIS image was introduced
in commit f0662105b674a3874227316abf8536bebc9b5995. A parameter
-s was also introduced to prohibit copying of the image file
automatically in the main program. However, this parameter
was implemented incorrectly and the image file
This code adds an SPL for booting from SPI flash on DA850 SoCs.
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Heiko Schocher h...@denx.de
Cc: Sandeep Paulraj s-paul...@ti.com
Cc: Tom Rini tr...@ti.com
Acked-by: Tom Rini tr...@ti.com
---
arch/arm/cpu/arm926ejs/davinci/Makefile |
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Heiko Schocher h...@denx.de
Cc: Mike Frysinger vap...@gentoo.org
Cc: Scott Wood scottw...@freescale.com
Acked-by: Mike Frysinger vap...@gentoo.org
---
doc/README.SPL |1 +
drivers/mtd/spi/Makefile |4 +++
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Stefano Babic sba...@denx.de
Cc: Heiko Schocher h...@denx.de
Cc: Mike Frysinger vap...@gentoo.org
---
.gitignore |1 +
Makefile | 13 +
2 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/.gitignore
Hi,
this is v5 of the last part of my recent patchset
[PATCH v3 00/15] Add an SPL to boot the da850evm from SPI
http://lists.denx.de/pipermail/u-boot/2011-November/82.html
Most of the other parts are already merged, together with
this patchset they introduce an SPL for the da850evm to run
On 05/12/2011 11:00, Thierry Reding wrote:
* Marek Vasut wrote:
The new API no longer uses the extra cd parameter that was used
to store the card presence state. Instead, this information is
returned via the function's return value. board_mmc_getcd()
returns -1 to indicate that no
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Heiko Schocher h...@denx.de
Cc: Mike Frysinger vap...@gentoo.org
---
lib/Makefile |2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/lib/Makefile b/lib/Makefile
index 54708c2..35ba7ff 100644
--- a/lib/Makefile
Signed-off-by: Horst Kronstorfer hkron...@frequentis.com
---
tools/mkenvimage.c |8
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/tools/mkenvimage.c b/tools/mkenvimage.c
index 9c32f4a..b7b0e0f 100644
--- a/tools/mkenvimage.c
+++ b/tools/mkenvimage.c
@@ -116,7 +116,7
Signed-off-by: Horst Kronstorfer hkron...@frequentis.com
---
tools/mkenvimage.c | 13 +
1 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/tools/mkenvimage.c b/tools/mkenvimage.c
index 22d1b88..3e7f967 100644
--- a/tools/mkenvimage.c
+++ b/tools/mkenvimage.c
@@ -79,6
Since the original implementation indicates explicit error handling
we turn off getopt()'s internal error messaging to avoid duplicate
error messages. Additionally we add ':' (missing option argument)
error handling.
Signed-off-by: Horst Kronstorfer hkron...@frequentis.com
---
Signed-off-by: Horst Kronstorfer hkron...@frequentis.com
---
tools/mkenvimage.c |7 ++-
1 files changed, 6 insertions(+), 1 deletions(-)
diff --git a/tools/mkenvimage.c b/tools/mkenvimage.c
index 3e7f967..046661d 100644
--- a/tools/mkenvimage.c
+++ b/tools/mkenvimage.c
@@ -36,6 +36,7 @@
On Mon, 5 Dec 2011, Wolfgang Denk wrote:
Dear Robert,
In message alpine.DEB.2.02.1112042100270.15118@oneiric you wrote:
i believe i've solved this issue, at least. i downloaded ELDK 4.2
and installed the ppc_8xx- toolchain. with that, i managed to
compile u-boot 2010.12 and flashed
* Stefano Babic wrote:
On 05/12/2011 09:23, Thierry Reding wrote:
This card-detect hook probably doesn't work. Perhaps somebody with more
knowledge about the hardware can comment on this. I think that perhaps
even the complete code from esdhc_init() could go into the getcd()
The reason
* Stefano Babic wrote:
On 05/12/2011 09:23, Thierry Reding wrote:
[...]
diff --git a/board/efikamx/efikamx.c b/board/efikamx/efikamx.c
index b78bf6c..451d709 100644
--- a/board/efikamx/efikamx.c
+++ b/board/efikamx/efikamx.c
@@ -309,17 +309,15 @@ static inline uint32_t
Dear Robert,
In message alpine.DEB.2.02.1112050701340.21244@oneiric you wrote:
No. Now you don't need a cuImage nay more. Just use the DT as I
showed you in the builkd and boot log I sent before.
for the sake of clarification, you write that i don't *need*
cuImages anymore, but
From: Dirk Behme dirk.be...@de.bosch.com
Add the initial support for Freescale i.MX6Q Sabre Lite board
Signed-off-by: Dirk Behme dirk.be...@de.bosch.com
Signed-off-by: Jason Liu jason@linaro.org
Cc: Stefano Babic sba...@denx.de
---
MAINTAINERS |1 +
On Mon, Dec 5, 2011 at 10:57 AM, Jason Liu jason@linaro.org wrote:
+IMAGE_VERSION 2
+
+# Boot Device : one of
+# spi, sd (the board has no nand neither onenand)
+
+BOOT_FROM sd
This board does not boot from sd, only from SPI NOR.
Could you please let me know how it was tested?
On 05.12.2011 14:23, Fabio Estevam wrote:
On Mon, Dec 5, 2011 at 10:57 AM, Jason Liu jason@linaro.org wrote:
+IMAGE_VERSION 2
+
+# Boot Device : one of
+# spi, sd (the board has no nand neither onenand)
+
+BOOT_FROM sd
This board does not boot from sd, only from SPI NOR.
Could you
On 05.12.2011 13:57, Jason Liu wrote:
From: Dirk Behme dirk.be...@de.bosch.com
Add the initial support for Freescale i.MX6Q Sabre Lite board
Please note that this patch relies on the basic i.mx6q core support
introduced with the patch series
On Mon, Dec 5, 2011 at 11:26 AM, Dirk Behme dirk.be...@de.bosch.com wrote:
On 05.12.2011 14:23, Fabio Estevam wrote:
On Mon, Dec 5, 2011 at 10:57 AM, Jason Liu jason@linaro.org wrote:
+IMAGE_VERSION 2
+
+# Boot Device : one of
+# spi, sd (the board has no nand neither onenand)
+
On 12/05/2011 03:20 AM, Christian Riesch wrote:
Hi Tom,
On Sat, Dec 3, 2011 at 6:49 AM, Christian Riesch
christian.rie...@omicron.at wrote:
Hi Tom,
Thanks for your comments.
On Friday, December 2, 2011, Tom Rini tr...@ti.com wrote:
On 12/02/2011 09:12 AM, Christian Riesch wrote:
On 12/03/2011 09:46 AM, Anatolij Gustschin wrote:
Fix:
clocks-common.c: In function 'setup_dplls':
clocks-common.c:256:6: warning: variable 'sysclk_ind' set but not used
[-Wunused-but-set-variable]
clocks-common.c: In function 'setup_non_essential_dplls':
clocks-common.c:292:6: warning:
On 12/04/2011 04:28 AM, Marek Vasut wrote:
Fix:
spl.c: In function 'jump_to_image_no_args':
spl.c:103: warning: assignment makes pointer from integer without a cast
spl.c:105: warning: dereferencing type-punned pointer will break
strict-aliasing rules
Signed-off-by: Anatolij Gustschin
On 12/04/2011 06:59 AM, Anatolij Gustschin wrote:
On Sun, 4 Dec 2011 12:30:40 +0100
Marek Vasut marek.va...@gmail.com wrote:
Fix:
clocks.c: In function 'setup_post_dividers':
clocks.c:175: warning: comparison is always true due to limited range of
data type
clocks.c:177: warning:
On 12/05/2011 03:58 AM, Christian Riesch wrote:
[snip]
include/configs/da850evm.h| 87
+
[snip]
+#define CONFIG_SYS_DA850_DDR2_SDTIMR2 ( \
+ (7 DV_DDR_SDTMR2_RASMAX_SHIFT) | \
+ (0 DV_DDR_SDTMR2_XP_SHIFT) | \
On Mon, Dec 5, 2011 at 2:19 AM, rojan rojan@bpltelecom.com wrote:
I have OMAP L138 Hawkboard which is loaded with some other program.
I am new to this hawkboard and tried to boot as per instructions from
user guide in http://www.hawkboard.org/ , system is not coming to
hawkboard.org to
On Mon, 5 Dec 2011 08:02:53 -0700
Tom Rini tr...@ti.com wrote:
On 12/03/2011 09:46 AM, Anatolij Gustschin wrote:
Fix:
clocks-common.c: In function 'setup_dplls':
clocks-common.c:256:6: warning: variable 'sysclk_ind' set but not used
[-Wunused-but-set-variable]
clocks-common.c: In
On Monday 05 December 2011 00:47:12 Graeme Russ wrote:
Hi Mike,
On Mon, Dec 5, 2011 at 5:39 PM, Mike Frysinger vap...@gentoo.org wrote:
On Sunday 04 December 2011 22:47:59 Graeme Russ wrote:
On Mon, Dec 5, 2011 at 2:43 PM, Mike Frysinger wrote:
+/*
+ * Base for arches to start adding
Hi Stefano,
Le 01/12/2011 17:14, Stefano Babic a écrit :
Hi Albert,
please pull from u-boot-imx, thanks.
The following changes since commit 3be4bab07b614c23f3bffaa6febca9a5a2c4dfa6:
vision2: Fix checkpatch warning (2011-11-28 13:10:36 +0100)
are available in the git repository at:
Hi Marek,
Le 02/12/2011 11:11, Marek Vasut a écrit :
I see no comments on my patchset for a while, so:
The following changes since commit f2695a272849764cda09bcce6f86d03105e9e46d:
PXA: Drop XM250 board (2011-11-25 20:44:24 +0100)
are available in the git repository at:
Hi Christian,
Le 01/12/2011 09:27, Christian Riesch a écrit :
This patch fixes the clear bss loop for bss sections that have
zero length, i.e., where __bss_start == __bss_end__.
Signed-off-by: Christian Rieschchristian.rie...@omicron.at
Cc: Albert Aribaudalbert.u.b...@aribaud.net
---
Hi,
this
Hi Tom,
Le 29/11/2011 23:53, Tom Rini a écrit :
The following changes since commit f2695a272849764cda09bcce6f86d03105e9e46d:
Marek Vasut (1):
PXA: Drop XM250 board
are available in the git repository at:
git://git.denx.de/u-boot-ti.git master
Anatolij Gustschin (1):
This is a follow-up to my issue, re:
/opt/embedded/tools/usr/bin/../lib/gcc/powerpc-linux/4.2.2/m8540/libgcc.a(divsf3.o):
In function `__divsf3':
On 12/05/2011 09:32 AM, Anatolij Gustschin wrote:
On Mon, 5 Dec 2011 08:02:53 -0700
Tom Rini tr...@ti.com wrote:
On 12/03/2011 09:46 AM, Anatolij Gustschin wrote:
Fix:
clocks-common.c: In function 'setup_dplls':
clocks-common.c:256:6: warning: variable 'sysclk_ind' set but not used
Le 29/11/2011 20:27, Tom Rini a écrit :
On Wed, Nov 9, 2011 at 11:06 PM, Heiko Schocherh...@denx.de wrote:
always do the cpu critical inits in cpu_init_crit,
and only jump to lowlevel_init, if CONFIG_SKIP_LOWLEVEL_INIT
is not defined.
Signed-off-by: Heiko Schocherh...@denx.de
Cc: Albert
On 05/12/2011 17:57, Albert ARIBAUD wrote:
Hmm... Your master is based on my next, not on my master. Do you intend
me to add these onto my 'next' or 'master' branch?
Sorry, I have applied the wrong script, I presume.
I will send a new pull request soon.
Best regards,
Stefano Babic
--
Hi Albert,
please pull from u-boot-imx (this time rebased on u-boot-arm/master..)
The following changes since commit d4870a914b73884f2f3e8fb082ae50f75fc01ebc:
arm, arm926ejs: Fix clear bss loop for zero length bss (2011-12-05
18:03:51 +0100)
are available in the git repository at:
Hi Stefano,
Le 05/12/2011 18:22, Stefano Babic a écrit :
Hi Albert,
please pull from u-boot-imx (this time rebased on u-boot-arm/master..)
The following changes since commit d4870a914b73884f2f3e8fb082ae50f75fc01ebc:
arm, arm926ejs: Fix clear bss loop for zero length bss (2011-12-05
On Monday 05 December 2011 11:43:09 Shadid, Bill wrote:
/opt/embedded/tools/usr/bin/../lib/gcc/powerpc-linux/4.2.2/m8540/libgcc.a(d
ivsf3.o): In function `__divsf3':
/opt/eldk/build/ppc-2008-04-01/work/usr/src/denx/BUILD/crosstool-0.43/buil
On Mon, 5 Dec 2011, Wolfgang Denk wrote:
Dear Robert,
In message alpine.DEB.2.02.1112050701340.21244@oneiric you wrote:
No. Now you don't need a cuImage nay more. Just use the DT as I
showed you in the builkd and boot log I sent before.
for the sake of clarification, you write
Am 05.12.2011 18:28, schrieb Mike Frysinger:
On Monday 05 December 2011 11:43:09 Shadid, Bill wrote:
/opt/embedded/tools/usr/bin/../lib/gcc/powerpc-linux/4.2.2/m8540/libgcc.a(d
ivsf3.o): In function `__divsf3':
/opt/eldk/build/ppc-2008-04-01/work/usr/src/denx/BUILD/crosstool-0.43/buil
Hi all,
As I don't have much time and the december release is coming soon, I
would appreciate that anyone with a patch that they think should go to
ARM master now please send me an e-mail with the link to the patchwork
patch page so that I delegate the patch to myself.
If the patch is
On Mon, Dec 5, 2011 at 11:05 AM, Albert ARIBAUD
albert.u.b...@aribaud.net wrote:
Hi all,
As I don't have much time and the december release is coming soon, I would
appreciate that anyone with a patch that they think should go to ARM master
now please send me an e-mail with the link to the
I've added a test suite to the build that can be accessed while at the u-boot
prompt. The suite allows folks to verify various h/w components without running
an OS. The suite contains some algorithms to convert sensor data to voltage,
current, power and temperature. I can modify some of these
On 12/03/2011 03:25 AM, Liu Shengzhou-B36685 wrote:
-Original Message-
From: Wood Scott-B07421
Sent: 2011年12月3日 2:45
To: Liu Shengzhou-B36685
Cc: u-boot@lists.denx.de; Gala Kumar-B11780
Subject: Re: [PATCH 4/4] mtd/nand: Add ONFI support for FSL NAND
controller
On 12/02/2011
On 12/05/2011 04:58 AM, Christian Riesch wrote:
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Heiko Schocher h...@denx.de
Cc: Mike Frysinger vap...@gentoo.org
Cc: Scott Wood scottw...@freescale.com
Acked-by: Mike Frysinger vap...@gentoo.org
---
doc/README.SPL
Dear Shadid, Bill,
In message e7f97b349c2a6843b718b2ddf2f9a8f016941...@email.corp.neptec.com you
wrote:
It was suggested that I should migrate to a newer version of u-boot to
resolve the issue.
I downloaded and compiled with u-boot-2011.03-rc and the compiler reported
the same errors.
On Monday 05 December 2011 14:33:40 Scott Wood wrote:
On 12/05/2011 04:58 AM, Christian Riesch wrote:
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Heiko Schocher h...@denx.de
Cc: Mike Frysinger vap...@gentoo.org
Cc: Scott Wood scottw...@freescale.com
Acked-by: Mike
Dear Robert,
In message alpine.DEB.2.02.1112051242090.4383@oneiric you wrote:
True, you don't have to use the DT. You don't have to use the most
straightforward way that has been well tested for a ton of
combinations of recent U-Boot releases against recent kernel
releases.
You are
On Mon, Dec 5, 2011 at 12:56 PM, Mike Frysinger vap...@gentoo.org wrote:
On Monday 05 December 2011 14:33:40 Scott Wood wrote:
On 12/05/2011 04:58 AM, Christian Riesch wrote:
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Heiko Schocher h...@denx.de
Cc: Mike Frysinger
Dear Shadid, Bill,
In message e7f97b349c2a6843b718b2ddf2f9a8f016941...@email.corp.neptec.com you
wrote:
Its surprising that this code compiled and ran fine with ELDK 4.0 but
has compile issues with 4.2. I guess some floating-point support was
removed. I'm still not clear why the abort
On Mon, Dec 5, 2011 at 3:58 AM, Christian Riesch
christian.rie...@omicron.at wrote:
Hi,
this is v5 of the last part of my recent patchset
Following on to my last email in 2/6 of the series, if there's no
objections other than mine about commenting and not doing 0 bit
shifts, and that's an
Hi Mike,
On Dec 6, 2011 3:44 AM, Mike Frysinger vap...@gentoo.org wrote:
On Monday 05 December 2011 00:47:12 Graeme Russ wrote:
Hi Mike,
On Mon, Dec 5, 2011 at 5:39 PM, Mike Frysinger vap...@gentoo.org
wrote:
On Sunday 04 December 2011 22:47:59 Graeme Russ wrote:
On Mon, Dec 5, 2011
Dear Nobuhiro Iwamatsu,
In message CABMQnVKLWn+hPcfFY_Gq=b9xcx1v9rmgk+5zs3mtrkchp1b...@mail.gmail.com
you wrote:
Dear Wolfgang Denk.
Please pull from git://git.denx.de/u-boot-sh master.
Best regards,
Nobuhiro
The following changes since commit
Dear Marek Vasut,
In message 201112021101.18529.marek.va...@gmail.com you wrote:
Hi Wolfgang,
let's see how this works :)
The following changes since commit 7708d8b352e9e595f6f08afd3206af6495c7dc09:
Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master (2011-12-=
02=20
Dear Kim Phillips,
In message 2004164356.5ab650e3a7af28de76f55...@freescale.com you wrote:
when a mkimage binary isn't present in the default system PATH, we
get this error:
$ ./MAKEALL MVBLM7
Configuring for MVBLM7 board...
make[1]: mkimage: Command not found
make[1]: ***
Dear Roy Zang,
In message 1319777529-28654-1-git-send-email-tie-fei.z...@freescale.com you
wrote:
The original m88es_config() does not do the SGMII mode
initialization and is buggy. Rewrite the function according to
3.0.6 kernel function m88e_config_init() in drivers/net/phy/marvell.c
On Tue, 29 Nov 2011 10:42:14 +0100
Horst Kronstorfer hkron...@frequentis.com wrote:
Signed-off-by: Horst Kronstorfer hkron...@frequentis.com
---
Makefile |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
Applied to u-boot-staging/ag...@denx.de. Thanks!
Anatolij
Dear Mike Frysinger,
In message 20111003.15436.vap...@gentoo.org you wrote:
I'm OK with expanding the name[] field, but as Thomas pointed out,
providing convenient u32 / u16 variables for the MAC address is
actually a faux ami that misleads people into using these variables
without
On Thu, 1 Dec 2011 00:50:50 +0100
Anatolij Gustschin ag...@denx.de wrote:
From: Gabe Black gabebl...@chromium.org
When printing the string \r\n to the framebuffer console, the first
character of the current line was being replaced with a space. The boot
prompt would become the oot prompt.
Dear Andy Fleming,
In message 1320072373-367-1-git-send-email-aflem...@freescale.com you wrote:
We want to move everything to phylib, and we definitely don't want
new drivers using the miiphy infrastructure.
Signed-off-by: Andy Fleming aflem...@freescale.com
---
common/miiphyutil.c
On Monday 05 December 2011 15:03:44 Tom Rini wrote:
On Mon, Dec 5, 2011 at 12:56 PM, Mike Frysinger vap...@gentoo.org wrote:
On Monday 05 December 2011 14:33:40 Scott Wood wrote:
On 12/05/2011 04:58 AM, Christian Riesch wrote:
Signed-off-by: Christian Riesch christian.rie...@omicron.at
On 12/02/2011 07:11 PM, Simon Glass wrote:
...
+int fdtdec_get_is_enabled(const void *blob, int node)
{
const char *cell;
cell = fdt_getprop(blob, node, status, NULL);
if (cell)
- return 0 == strcmp(cell, ok);
- return default_val;
+ return
On 12/02/2011 05:59 PM, Simon Glass wrote:
Hi Stephen,
Here are my comments on the rest of your email.
On Mon, Nov 28, 2011 at 11:21 AM, Stephen Warren swar...@nvidia.com wrote:
On 11/23/2011 08:54 PM, Simon Glass wrote:
This adds basic support for the Tegra2 USB controller. Board files
Hi Stephen,
On Mon, Dec 5, 2011 at 1:27 PM, Stephen Warren swar...@nvidia.com wrote:
On 12/02/2011 07:11 PM, Simon Glass wrote:
...
+int fdtdec_get_is_enabled(const void *blob, int node)
{
const char *cell;
cell = fdt_getprop(blob, node, status, NULL);
if (cell)
-
Dear Harald Kipp,
In message 4ec6b254.80...@egnite.de you wrote:
Dear Maintainers,
On 02.11.2011 10:55, Tim Schendekehl wrote:
Add support for the Ethernut 5 open hardware design, based
on Atmel's AT91SAM9XE512 SoC.
Any chance to get this patch reviewed before it's becoming outdated
Hi Stephen,
On Mon, Dec 5, 2011 at 1:33 PM, Stephen Warren swar...@nvidia.com wrote:
On 12/02/2011 05:59 PM, Simon Glass wrote:
Hi Stephen,
Here are my comments on the rest of your email.
On Mon, Nov 28, 2011 at 11:21 AM, Stephen Warren swar...@nvidia.com wrote:
On 11/23/2011 08:54 PM,
On 12/02/2011 07:11 PM, Simon Glass wrote:
This adds some support into fdtdec for reading GPIO definitions from
the fdt. We permit up to FDT_GPIO_MAX GPIOs in the system. Each GPIO
is of the form:
gpio-function-name = phandle gpio_num flags;
where:
phandle is a pointer to the GPIO node
Dear Gerlando Falauto,
In message 1321634955-5561-2-git-send-email-gerlando.fala...@keymile.com you
wrote:
Signed-off-by: Gerlando Falauto gerlando.fala...@keymile.com
---
common/serial.c | 51 +--
include/serial.h | 19
Dear Gerlando Falauto,
In message 1321634955-5561-3-git-send-email-gerlando.fala...@keymile.com you
wrote:
Signed-off-by: Gerlando Falauto gerlando.fala...@keymile.com
---
common/serial.c |2 +-
include/serial.h |2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
Applied,
Dear Reinhard Arlt,
In message 4ec6a749.1020...@esd.eu you wrote:
From: Reinhard Arlt reinhard.a...@esd.eu
This patch fix the GCC 4.6 warnings in
in what?
and which warnings?
Signed-off-by: Reinhard Arlt reinhard.a...@esd.eu
--
diff --git a/board/esd/cpci750/mv_eth.c
Dear Reinhard Arlt,
In message 4ec6a8e3.7050...@esd.eu you wrote:
From: Reinhard Arlt reinhard.a...@esd.eu
Do not enable the data cache in start.S, the decrementer do not work.
Signed-off-by: Reinhard Arlt reinhard.a...@esd.eu
--
diff --git a/arch/powerpc/cpu/74xx_7xx/start.S
Hi Stephen,
On Mon, Dec 5, 2011 at 1:46 PM, Stephen Warren swar...@nvidia.com wrote:
On 12/02/2011 07:11 PM, Simon Glass wrote:
This adds some support into fdtdec for reading GPIO definitions from
the fdt. We permit up to FDT_GPIO_MAX GPIOs in the system. Each GPIO
is of the form:
On 12/02/2011 07:11 PM, Simon Glass wrote:
Add a function to look up a property which is a phandle in a node, and
another to read a fixed-length integer array from an fdt property.
Also add a function to read boolean properties, although there is no
actual boolean type in U-Boot.
+/**
+ *
Dear Thomas Weber,
In message 1320912600-3170-1-git-send-email-we...@corscience.de you wrote:
When compiling with -DDEBUG enabled this caused a
warning about multiple definition of DEBUG.
Signed-off-by: Thomas Weber we...@corscience.de
---
common/env_nand.c |2 +-
1 files changed, 1
Dear Anatolij Gustschin,
In message 1321729176-5520-1-git-send-email-ag...@denx.de you wrote:
Fix:
mvgbe.c: In function 'mvgbe_send':
mvgbe.c:555:2: warning: dereferencing type-punned pointer will
break strict-aliasing rules [-Wstrict-aliasing]
mvgbe.c: In function 'mvgbe_recv':
Dear Simon Glass,
In message 1321726854-18400-1-git-send-email-...@chromium.org you wrote:
This fixes the following warning with gcc 4.4.3.
aisimage.c: In function 'aisimage_generate':
aisimage.c:365: warning: 'tsize' may be used uninitialized in this function
Signed-off-by: Simon Glass
On 12/05/2011 02:40 PM, Simon Glass wrote:
Hi Stephen,
On Mon, Dec 5, 2011 at 1:27 PM, Stephen Warren swar...@nvidia.com wrote:
On 12/02/2011 07:11 PM, Simon Glass wrote:
...
+int fdtdec_get_is_enabled(const void *blob, int node)
{
const char *cell;
cell = fdt_getprop(blob,
Hi Stephen,
On Mon, Dec 5, 2011 at 1:59 PM, Stephen Warren swar...@nvidia.com wrote:
On 12/02/2011 07:11 PM, Simon Glass wrote:
Add a function to look up a property which is a phandle in a node, and
another to read a fixed-length integer array from an fdt property.
Also add a function to read
This change conditionally modifies the zboot command so that it can use the
32 bit boot protocol. This is necessary because the 16 bit realmode entry
point assumes that it can call BIOS services which neither coreboot nor
u-boot provide.
Signed-off-by: Gabe Black gabebl...@chromium.org
---
This change finishes plumbing the initrd support built into the zboot
mechanism out to the command interface.
It also fixes a bug in the command declaration where the kernel size could
be passed as an optional second parameter but not enough arguments were
allowed.
Signed-off-by: Gabe Black
This change also forces the lib_sysinfo structure to be in the .data
section. Otherwise it ends up in the .bss section. U-boot assumes that it
doesn't need to copy it over during relocation, and instead fills that
whole section with zeroes. If we really were booting from ROM that would be
This change cleans up some formatting issues in the zimage handling code, and
converts it from using offsets added to a base pointer to using the available
structure definitions which were already being included.
Signed-off-by: Gabe Black gabebl...@chromium.org
---
Changes in v2:
- Changed
Add functionality for reading in the coreboot tables and storing their
contents in a structure for easy access.
These four patches add support for the 32 bit Linux boot protocol to the
zboot command. They also add support for an initrd.
Changes in v2:
- Move arch/x86/include/asm/ic/coreboot/* to
1 - 100 of 170 matches
Mail list logo
