Hi Tom,
On Fri, 12 Apr 2013 16:47:07 -0400, Tom Rini tr...@ti.com wrote:
Hello,
The following changes since commit 90639feaa0d66a204f9d03a325ab14e2f97f6cbb:
arm/km: add support for kmsuv31 board (2013-04-12 21:42:22 +0530)
are available in the git repository at:
Hi All,
I have a TP-Link WDR4310, it is base Atheros AR9344 SoC, RAM size is 128MiB,
Flash size is 8MiB, I want transplant u-boot to it.
I can find CPU config file(MIPS32) in u-boot source tree, but I can't find
board config file, who can tell me, what board similar to it?
Thanks!
Rynn.
Hi, Fabio,
On Fri, Apr 12, 2013 at 3:53 AM, Alison Wang b18...@freescale.com wrote:
+static char *get_reset_cause(void)
+{
+ char *resetcause[32] = {POR,
+ Cortex A5 WDOG Timer Reset,
+ 0,
You mix strings and an integer
Hi, Fabio,
On Fri, Apr 12, 2013 at 3:53 AM, Alison Wang b18...@freescale.com wrote:
This patch adds uart driver support for vybrid platform.
Signed-off-by: TsiChung Liew tsicl...@gmail.com
Signed-off-by: Jason Jin jason@freescale.com
Signed-off-by: Alison Wang b18...@freescale.com
---
Hi, Fabio,
On Fri, Apr 12, 2013 at 3:53 AM, Alison Wang b18...@freescale.com wrote:
This patch adds ethernet driver support for vybrid platform.
Signed-off-by: TsiChung Liew tsicl...@gmail.com
Signed-off-by: Jason Jin jason@freescale.com
Signed-off-by: Alison Wang b18...@freescale.com
Hi, Fabio,
On Fri, Apr 12, 2013 at 3:53 AM, Alison Wang b18...@freescale.com wrote:
This patch adds Freescale vybrid vf600 tower board support.
Signed-off-by: TsiChung Liew tsicl...@gmail.com
Signed-off-by: Jason Jin jason@freescale.com
Signed-off-by: Alison Wang b18...@freescale.com
Hi Tetsuyuki,
On Fri, 5 Apr 2013 19:12:51 +0900, Tetsuyuki Kobayashi
k...@kmckk.co.jp wrote:
When swi instruction is executed, it is expected to get message
software interrupt in console and dump registers and reboot, as
do_software_interrupt() in arch/arm/lib/interrupts.c.
But, actually it
Hi,
On Tue, Feb 5, 2013 at 9:04 PM, Vivek Gautam gautamvivek1...@gmail.com wrote:
Hi Simon,
On Tue, Feb 5, 2013 at 2:56 AM, Simon Glass s...@chromium.org wrote:
Hi,
On Mon, Jan 28, 2013 at 2:39 AM, Vivek Gautam gautam.vi...@samsung.com
wrote:
Exynos5250 supports secondary USB device
Snow is missing a TMU node, and with TMU support this is not allowed, so it
fails to boot. Add it.
Signed-off-by: Simon Glass s...@chromium.org
---
board/samsung/dts/exynos5250-snow.dts | 14 ++
1 file changed, 14 insertions(+)
diff --git a/board/samsung/dts/exynos5250-snow.dts
The debug() which prints out the current call is not very useful, since if
it is called early enough (such as before the console is ready in the
pre-relocation board_init_f() sequence) it can hang the board.
It is more useful to print a message when a call fails, and in this case
the
The current code is causing errors like this on my toolchains:
/usr/x86_64-pc-linux-gnu/armv7a-cros-linux-gnueabi/binutils-bin/2.22/
ld.bfd.real: failed to merge target specific data of file /usr/lib/gcc/
armv7a-cros-linux-gnueabi/4.7.x-google/libgcc.a(_divdi3.o)
Use do_div() to avoid this.
Dear Paul B. Henson,
Let me just preface this reply with the disclaimer that I'm fairly new
to embedded development, and it sounds like you know a lot more about
what you're talking about than I do ;).
[...]
I'm not reading the thread as it -- again -- contains loads of baseless is
broken
Dear Scott Wood,
On 04/12/2013 01:59:18 PM, Mike Dunn wrote:
This patch adds a driver for the diskonchip G4 nand flash device. It
is based
on the driver from the linux kernel.
This also includes a separate SPL driver. A separate SPL driver is
used because
the device operates in
On 11/04/2013 04:55, Otavio Salvador wrote:
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
include/configs/mx6qsabre_common.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/configs/mx6qsabre_common.h
b/include/configs/mx6qsabre_common.h
index
On 10/04/2013 14:01, Fabio Estevam wrote:
Hi Stefano,
On Wed, Apr 10, 2013 at 3:10 AM, Stefano Babic sba...@denx.de wrote:
I am afraid you are breaking MX3x / MX25 because you add
MXC_CSPICTRL_MODE_MASK only to MX5 / MX6.
It will not break other platforms because this code is protected
On Sat, Apr 13, 2013 at 7:42 AM, Marek Vasut ma...@denx.de wrote:
Dear Paul B. Henson,
Let me just preface this reply with the disclaimer that I'm fairly new
to embedded development, and it sounds like you know a lot more about
what you're talking about than I do ;).
[...]
I'm not reading
On 12/04/13 11:56, Mark Jackson wrote:
We have a dual Ethernet board (based on the BeagelBone) but with both Ethernet
ports connected.
I'm wanting to use eth1 (rather than eth0), so in my board.c file, I changed:-
static struct cpsw_slave_data cpsw_slaves[] = {
{
On 12/04/13 11:56, Mark Jackson wrote:
We have a dual Ethernet board (based on the BeagelBone) but with both Ethernet
ports connected.
I'm wanting to use eth1 (rather than eth0), so in my board.c file, I changed:-
static struct cpsw_slave_data cpsw_slaves[] = {
{
On Sat, Apr 13, 2013 at 2:15 AM, Wang Huan-B18965 b18...@freescale.com wrote:
No hardcoded IP addresses/MAC addresses, please.
[Alison] Agree. What is the general configuration way for these default
settings?
Just remove it from the config file.
For IP addresses, the user should manually
Dear Trent Piepho,
On Sat, Apr 13, 2013 at 7:42 AM, Marek Vasut ma...@denx.de wrote:
Dear Paul B. Henson,
Let me just preface this reply with the disclaimer that I'm fairly new
to embedded development, and it sounds like you know a lot more about
what you're talking about than I do
On 12/04/2013 08:53, Alison Wang wrote:
This series contains the support for vybrid CPU and vf600 tower board.
The Vybrid devices are a family of Freescale's latest Dual Single
Core offering with ARM Cortex A5 and CM4 based processors for
Advanced Connected Radio, Entry Infotainment, and
Dear Mike Dunn,
In message 5167f7b4.3070...@newsguy.com you wrote:
In this case, it's a simple algorithm and only a couple trivial changes were
made since it was first added to the kernel, so the error is probably
inconsequential, but I'll resubmit, reporting the HEAD of the kernel I took it
On 12/04/2013 08:53, Alison Wang wrote:
This patch adds uart driver support for vybrid platform.
Signed-off-by: TsiChung Liew tsicl...@gmail.com
Signed-off-by: Jason Jin jason@freescale.com
Signed-off-by: Alison Wang b18...@freescale.com
---
Hi Alison
diff --git
On 12/04/2013 08:53, Alison Wang wrote:
This patch adds eSDHC driver support for vybrid platform.
Signed-off-by: TsiChung Liew tsicl...@gmail.com
Signed-off-by: Jason Jin jason@freescale.com
Signed-off-by: Alison Wang b18...@freescale.com
---
drivers/mmc/fsl_esdhc.c | 4 ++--
1 file
On 12/04/2013 08:53, Alison Wang wrote:
This patch adds Freescale vybrid vf600 tower board support.
Signed-off-by: TsiChung Liew tsicl...@gmail.com
Signed-off-by: Jason Jin jason@freescale.com
Signed-off-by: Alison Wang b18...@freescale.com
---
Hi Alison.
On 11/04/2013 11:06, Stefan Roese wrote:
They never return anything also than 0, so lets change the function
to void instead.
Signed-off-by: Stefan Roese s...@denx.de
---
arch/arm/imx-common/iomux-v3.c | 18 +-
arch/arm/include/asm/imx-common/iomux-v3.h | 4
On Thu, 11 Apr 2013 17:43:21 +0200, Albert ARIBAUD
albert.u.b...@aribaud.net wrote:
Commit 3ebd1cbc introduced compiler-generated __bss_start
and __bss_end__ and commit c23561e7 rewrote all __bss_end__
as __bss_end. Their merge caused silent and harmless but
potentially bug-inducing clashes
27 matches
Mail list logo
