Wolfgang Denk wrote:
in message [EMAIL PROTECTED] you wrote:
I don't know what is the culprit, but Wolfgang's mails always lack of
Reference: field, thus they always break my thread view of Thunderbird.
I confirmed this behavior with [EMAIL PROTECTED], [EMAIL PROTECTED] and
[EMAIL PROTECTED]
Hi Jean,
Jean-Christophe PLAGNIOL-VILLARD wrote:
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
---
diff with V1 remove unrelated changement
doc/README.qemu_mips | 64
+-
1 files changed, 63 insertions(+), 1 deletions(-)
Hi Wolfgang,
please pull MIPS repository to pick up the following change:
---
The following changes since commit 628ffd73bcff0c9f3bc5a8eeb2c7455fe9d28a51:
Jean-Christophe PLAGNIOL-VILLARD (1):
device: make device_register() clone the device
are available in the git repository at:
Luigi 'Comio' Mantellini wrote:
or I have some problem on my u-boot tree?
It seems you do.
http://git.denx.de/?p=u-boot.git;a=blob;f=include/asm-mips/types.h;hb=HEAD#l89
http://git.denx.de/?p=u-boot.git;a=commit;h=e99ccb488181d012248c6be30b2093e950319fc5
BTW, is your Reply-To: field correct?
Ping.
[ I should have let you know, Wolfgang. Sorry. ]
Shinya Kuribayashi wrote:
__ARM__ is given by arm_config.mk automatically.
Signed-off-by: Shinya Kuribayashi [EMAIL PROTECTED]
---
config.mk |9 -
1 files changed, 0 insertions(+), 9 deletions(-)
diff --git
with the maintainance policy of README and doc/*, but
is there any reasone this README.imx31 is sitting on the top of tree?
Should be marged into $(TOPDIR)/README, or moved to doc/ directory?
Noticed a few minutes ago, so just let you know...
--
Shinya Kuribayashi
NEC Electronics
Wolfgang Denk wrote:
can you please check if all urgent patches have been added to the
U-Boot master branch?
If anything should still be missing, please respond *now*.
My intention is to push out the 2008-10 release tomorrow, i. e. in
approximately 30 hours from now.
I tried ./MAKEALL
This patch will move au1x00_eth_initialize from net/eth.c to cpu_eth_init
as a part of ongoing eth_initialize cleanup work. The function ret value
is also fixed as it should be negative on fail.
Signed-off-by: Shinya Kuribayashi [EMAIL PROTECTED]
---
Changes in rev2:
* cpu/mips/cpu.c: Include
Chetan Nanda wrote:
We have a MIPS-4KEC based SoC and running an older version of U-Boot
(1.1.3) on it. It is working perfectly fine.
Board has 8MB AMD flash and starting address of that flash is 0xBFC0
(reset vector for MIPS).
Problem is that we are not able to access full 8MB of
Wolfgang Denk wrote:
Summary of current status:
* Many boards now throw the (expected)
#warning Ethernet driver is deprecated. Please update to use
CONFIG_NET_MULTI
messages.
I found qemu_mips_config is spotted by it:
Configuring for qemu-mips board...
eth.c:497:2: warning:
Hi,
Ben Warren wrote:
I found qemu_mips_config is spotted by it:
Configuring for qemu-mips board...
eth.c:497:2: warning: #warning Ethernet driver is deprecated. Please
update to use CONFIG_NET_MULTI
But I don't follow the recent changes including that CONFIG_NET_MULTI
migration, nor I
mon...@monstr.eu wrote:
From: Michal Simek mon...@monstr.eu
Signed-off-by: Michal Simek mon...@monstr.eu
Signed-off-by: Michal Simek michal.si...@petalogix.com
---
board/qemu-mips/README |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
Wolfgang,
please take this one directly
Renato Andreola wrote:
From 21d84ab72266f118794233176bd356d8b1cfdf35 Mon Sep 17 00:00:00 2001
From: Renato Andreola renato.andre...@imagos.it
Date: Fri, 21 Aug 2009 18:05:51 +0200
Subject: [PATCH] drivers/mtd/cfi_flash: precision and underflow problem in
tout calculation
With old
: In function 'onenand_board_init':
ebi_onenand.c:196: error: 'struct onenand_chip' has no member named
'read_spareram'
make[1]: *** [ebi_onenand.o] Error 1
make[1]: *** Waiting for unfinished jobs
make: *** [board/micronas/vct/libvct.a] Error 2
Signed-off-by: Shinya Kuribayashi skuri
:
ebi_onenand.c: In function 'onenand_board_init':
ebi_onenand.c:196: error: 'struct onenand_chip' has no member named
'read_spareram'
make[1]: *** [ebi_onenand.o] Error 1
make[1]: *** Waiting for unfinished jobs
make: *** [board/micronas/vct/libvct.a] Error 2
Signed-off-by: Shinya Kuribayashi skuri
On 11/11/2010 12:37 PM, Xiangfu Liu wrote:
From: Xiangfu Liu xian...@sharism.cc
If possible, please describe what Jz4740 SoC is, an overview of JzRISC
processor, where this patch is from or where to get the original work,
and so on.
It also would be nice we could have Signed-off-by: or
On 11/18/10 9:54 PM, Wolfgang Denk wrote:
the U-Boot Patchwork setup is now mostly complete (except that Shinya
Kuribayashi has not registered yet).
Sorry I'm late, registered as skuribay.
By the way, maybe good opportunity to drop the leading [U-Boot] tag
from Subject: line? Still slightly
Hi,
On 11/30/2010 11:35 PM, Luigi 'Comio' Mantellini wrote:
Look the following benchmark (qemu-mips board):
U-Boot Vanilla
179600 bytes u-boot.bin
Bootstrap code w/o compresion (memcpy)
189224 bytes u-boot-bootstrap.bin
-- size 105%
Bootstrap code using BZIP2 compression
114388
On 12/04/2010 11:32 AM, Shinya Kuribayashi wrote:
Once this bootstrap feature approved as general U-Boot feature, I'd
like to take MIPS-related changes.
Thanks,
Ralf
Not Ralf! Needs two cups of coffee to wake up...
Shinya
___
U-Boot
Thanks for keeping on working on jz4740 patchset.
On 01/10/2011 01:18 AM, Xiangfu Liu wrote:
Hi Wolfgang
those patches are for add xburst jz4740 and Ben NanoNote(named qi_lb60) to
U-Boot
some info about xburst jz4740:
the xburst jz4740 is recently added to linux 2.6.36
and it's
fine
with me.
--
Shinya Kuribayashi
NEC Electronics
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Signed-off-by: Shinya Kuribayashi skuri...@pobox.com
---
Hi,
I happened to find this typo with the help of vim highlight.
onenand_ipl/board/apollon/Makefile |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/onenand_ipl/board/apollon/Makefile
b/onenand_ipl/board/apollon
independent from $(BOARD) as much as possible.
Signed-off-by: Shinya Kuribayashi skuri...@pobox.com
---
config.mk |4
1 files changed, 0 insertions(+), 4 deletions(-)
diff --git a/config.mk b/config.mk
index 7fc0453..f2c2c6c 100644
--- a/config.mk
+++ b/config.mk
@@ -194,10 +194,6 @@ BFD_ROOT_DIR
This variable is not unused anywhere.
Signed-off-by: Shinya Kuribayashi skuri...@pobox.com
---
config.mk |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/config.mk b/config.mk
index f2c2c6c..a9973a4 100644
--- a/config.mk
+++ b/config.mk
@@ -196,7 +196,7 @@ endif
Hi Jean, or someone who understands U-Boot's build system well,
Jean-Christophe PLAGNIOL-VILLARD wrote:
at the first run of make we generate the autoconf.mk and autoconf.mk.dep
if not already the case and we currently include only to .dep
in order to use these autogenerated value we need to
Jean-Christophe PLAGNIOL-VILLARD wrote:
| ifneq (,$(CONFIG_CPU_LITTLE_ENDIAN))
| PLATFORM_CPPFLAGS += $(shell $(CC) -dumpmachine |...
| else
| PLATFORM_CPPFLAGS += $(shell $(CC) -dumpmachine |...
| endif
|
| PLATFORM_LDFLAGS += -EL
does work.
???
you compile it as big endian to link
Hi Detlev,
Detlev Zundel wrote:
This variable is not unused anywhere.
Makes my brain twist and after carefully applying boolean equivalence
operations contradicts the title ;)
Oops, thanks for pointing out. Will correct it later.
___
U-Boot
Hi,
Peter Tyser wrote:
This series moves api_examples to api/examples and moves all
lib* directories into a common lib/ directory. It also
moves the ARCH_config.mk files into their corresponding
lib directory.
Seeing 12 lib_ARCH directories and 12 ARCH_config.mk
files in U-Boot's top
Peter Tyser wrote:
Before verifying MIPS builds, I'd like to make sure that why you take
lib/$(ARCH)/ alternative, not $(ARCH)/lib/. If there were any
discussion on #IRC, is there any chance we could share the summary or
decision to follow?
There was no discussion, /lib/$(ARCH) just made
have appreciated finding hardcoded powerpc assumptions
when they tried to add their boards.
Heh, we're already using onenand_ipl on our MIPS machines ;-)
--
Shinya Kuribayashi
NEC Electronics
___
U-Boot mailing list
U-Boot@lists.denx.de
http
eth.c:497:2: warning: #warning Ethernet driver is deprecated. Please update to
use CONFIG_NET_MULTI
Signed-off-by: Shinya Kuribayashi skuri...@pobox.com
---
I have a few concerns about this fix:
First. I'm not sure why CONFIG_NET_MULTI is undefed for qemu_mips,
while CONFIG_DRIVER_NE2000
Hi Ben,
Ben Warren wrote:
Shinya Kuribayashi wrote:
First. I'm not sure why CONFIG_NET_MULTI is undefed for qemu_mips,
while CONFIG_DRIVER_NE2000 has been enabled for qemu_mips at an early
stage.
I don't follow recent changes around eth.c and CONFIG_NET_MULTI, but
it's probably
purpose for Wolfgang.
Nothing interesting is there, please use git://git.denx.de/u-boot.git,
instead.
Thanks,
--
Shinya Kuribayashi
NEC Electronics
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
sa1100.h is not used anywhere, then remove it.
$ find . -name '*.h' -empty -print
./include/sa1100.h
$ git grep 'sa1100.h' .
$
Signed-off-by: Shinya Kuribayashi shinya.kuribaya...@necel.com
---
include/sa1100.h |0
1 files changed, 0 insertions(+), 0 deletions(-)
delete mode 100644
not take care of this :-)
--
Shinya Kuribayashi
NEC Electronics
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Detlev-san,
Detlev Zundel wrote:
Instead of special casing the different access patterns, use common
code with light macros sprinkled in to accomodate for the different
layouts of the register structure.
Note that this also changes the types of the registers for the
positively packed (1)
Detlev Zundel wrote:
To be honest, I did not expect such problems, as I saw no hints from
comments on why this code was needed. Thinking afresh, it now makes at
least some sense why the code was. It nevertheless was inconsistent, as
the word access was only done in an asymmetric way
Detlev Zundel wrote:
As I said, I understand now why there were different data-types involved
although this was kind of non-obvious. So I take it, you had a working
configuration with REG_SIZE = 4, correct?
I might be unclear. I used to use REG_SIZE = -16, as 16550 registers
are located at 0,
Shinya Kuribayashi wrote:
Detlev Zundel wrote:
As I said, I understand now why there were different data-types involved
although this was kind of non-obvious. So I take it, you had a working
configuration with REG_SIZE = 4, correct?
I might be unclear. I used to use REG_SIZE = -16
Hi,
Detlev Zundel wrote:
Thinking about it some more, I wonder about the following. You said,
this would work for you:
struct NS16550 {
unsigned long rbr;
unsigned long postpad_rbr[3];
while
struct NS16550 {
unsigned char rbr;
unsigned char
Hi,
Detlev Zundel wrote:
I see. Actually I was looking a lot at the Linux driver but was hoping
that we could away without introducing serial_{in,out}...
In my horrible opinion, the combinations of base addres + reg_shift
+ iotype (char, long, or whatever), are simpler, more configurable,
Hi Jerry-san,
Jerry Van Baren wrote:
I might be unclear. I used to use REG_SIZE = -16, as 16550 registers
are located at 0, +0x10, +0x20, ..., .
16 byte stride. That is seriously odd.
Well, 8 or 16 byte stride is not so odd, IMHO.
I don't know much about precise hardware logics, but the
Shinya Kuribayashi wrote:
As for my hardware, however, this still doesn't work. My processor
(MIPS 4KEc) of couse supports byte read/write, on the other hand,
the address decoder at UART module can not handle byte addresses
properly; all byte read/write accesses with +1/+2/+3 offset
eth_device* dev){
+ volatile u32 *macen = (volatile u32*)MAC0_ENABLE;
+
+ /* Put MAC0 in reset */
+ *macen = 0;
}
int au1x00_enet_initialize(bd_t *bis){
Acked-by: Shinya Kuribayashi skuri...@pobox.com
Wolfgang-san,
could you please pick up this patch directly? Thanks
Wolfgang Denk wrote:
We can easily ignore such boards of course, but it would be very nice
for U-Boot if it could provide easy configurable drivers and could
support as many hardwares as possible.
Currently it seems that all in-tree boards can be accomodated with the
construct that I
-boot-mips.git master
Shinya Kuribayashi (2):
MIPS: Make all extern-ed functions in bitops.h static
MIPS: lib_mips/board.c: Remove unused variables
Thomas Lange (1):
MIPS: Implement ethernet halt for au1x00
cpu/mips/au1x00_eth.c |4 +++
include/asm-mips/bitops.h | 64
Shinya Kuribayashi wrote:
Thomas Lange (1):
MIPS: Implement ethernet halt for au1x00
[...]
diff --git a/cpu/mips/au1x00_eth.c b/cpu/mips/au1x00_eth.c
index 6272a3a..5074997 100644
--- a/cpu/mips/au1x00_eth.c
+++ b/cpu/mips/au1x00_eth.c
@@ -276,6 +276,10 @@ static int au1x00_init
the corresponding config.mk
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
Cc: Shinya Kuribayashi shinya.kuribaya...@necel.com
I've double checked that consolidation of u-boot.lds files is ok, and
LDSCRIPT part as wll.
diff --git a/Makefile b/Makefile
index ee09856..2cb0ce2 100644
Shinya Kuribayashi wrote:
Background is, we're going to have a single, unified u-boot.lds, hence
OUTPUT_FORMAT(default, big, little) command would be applied across all
supported targets as well. Then, we'd like to pass -EL specifier to the
linker so that some little-endian builds
Stefan Roese wrote:
On Friday 15 May 2009 11:32:26 Kazuaki Ichinohe wrote:
This patch adds a SATA harddisk driver for the canyonlands.
This patch is kernel driver's porting.
This pach corresponded to not cmd_scsi but cmd_sata.
Looks good now. Thanks for all your effort here.
So:
Hi,
Jean-Christophe PLAGNIOL-VILLARD wrote:
curently we need to specify the endian of each board in the LDS
in order to unify all of them add full endianness support
by default the mips platforms will be compiled as big-endian
to compile it as little-endian define CONFIG_CPU_LITTLE_ENDIAN
Jean-Christophe PLAGNIOL-VILLARD wrote:
all mips boards except a few use the same cpu lds so move it to cpu/$(CPU)
that could be overwrite in following order
SOC
BOARD
via the corresponding config.mk
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
Looks good,
Jean-Christophe PLAGNIOL-VILLARD wrote:
On 00:24 Sun 24 May , Shinya Kuribayashi wrote:
Thanks for resubmitting, but there's one thing I'm warried about.
when I gave it a try last time, with almost the same patch you did,
I had a GNU make problem. I'll look closely into it, so please
Stefan Roese wrote:
This patch adds flush_/invalidate_dcache_range() to the MIPS architecture.
Those functions are needed for the upcoming dcache support for the USB
EHCI driver. I chose this API because those cache handling functions are
already present in the PPC architecture.
Stefan Roese wrote:
Signed-off-by: Stefan Roese s...@denx.de
---
v3:
- Added USB EHCI support
- Added performance enhanced OneNAND read support
v2:
- Fixed issues in u-boot.lds mentioned by Andrew Dyer
board/micronas/vct/Makefile| 57
board/micronas/vct/bcu.h
Wolfgang Denk wrote:
Stefan, I'm going to fold all patches into sinble commit, ok?
That's ok with me. Not sure if Wolfgang has an objection though, since he
might have problems tracking the status of the patches.
Wolfgang, an objections from you?
Yes, indeed. I like to see commits
Hi Wolfgang,
please pull U-Boot/MIPS repository to pick up the following changes.
Thanks in advance,
Shinya
---
The following changes since commit 8f86a3636ef88427f880610638e80991adc41896:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
are available
Stefan Roese wrote:
This patch fixes this compilation warning:
./MAKEALL dbau1000
Configuring for dbau1x00 board...
au1x00_eth.c: In function 'au1x00_send':
au1x00_eth.c:158: warning: passing argument 1 of 'virt_to_phys' discards
qualifiers from pointer target type
...
Seens with
In the commit 79b51ff8205f0354d5300570614c1d2db499679c ([MIPS] cpu/mips/
Makefile: Split [CS]OBJS onto separate lines), I wrongly deleted a START
line. This patch puts it back.
Signed-off-by: Shinya Kuribayashi shinya.kuribaya...@necel.com
---
cpu/mips/Makefile |1 +
1 files changed, 1
, so gcc warns about it.
Confirmed with ELDK 4.2 (GCC 4.2.2) and Sourcey G++ 4.2 (GCC 4.2.3).
To fix this, we add a volatile attribute to the argument in question.
The virt_to_phys function in Linux kernel also does the same thing.
Signed-off-by: Stefan Roese s...@denx.de
Signed-off-by: Shinya
Hello,
Wolfgang Denk wrote:
If anything should still be missing, please respond *now*.
My intention is to push out the 2009.03 release on schedule,
i. e. on Saturday, March 21, 2009.
At the moment I am not planning for another release candidate.
* With GCC 4.2.3, all MIPS targets
know why people prefers alias, though :-)
Acked-by: Shinya Kuribayashi [EMAIL PROTECTED]
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
no warns/errors.
Signed-off-by: Stefan Roese [EMAIL PROTECTED]
Acked-by: Shinya Kuribayashi [EMAIL PROTECTED]
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
, because I don't want
to have a dummy empty function just for the `alias'.
int __attribute__((weak)) board_early_init_f(void)
{
return 0;
}
But that's not a big deal. Using weak function is ok, of course. Sorry
for the noise.
Thanks,
--
Shinya Kuribayashi
NEC Electronics
Stefan Roese wrote:
@@ -243,9 +243,11 @@ reset:
mtc0zero, CP0_COUNT
mtc0zero, CP0_COMPARE
+#if !defined(CONFIG_SKIP_LOWLEVEL_INIT)
/* CONFIG0 register */
li t0, CONF_CM_UNCACHED
mtc0t0, CP0_CONFIG
+#endif /* !CONFIG_SKIP_LOWLEVEL_INIT */
/*
Jean-Christophe PLAGNIOL-VILLARD wrote:
On 13:18 Wed 12 Nov , Stefan Roese wrote:
diff --git a/lib_mips/board.c b/lib_mips/board.c
index 77e1cc8..01dda69 100644
--- a/lib_mips/board.c
+++ b/lib_mips/board.c
@@ -70,6 +70,15 @@ static ulong mem_malloc_brk;
*/
unsigned long
[EMAIL PROTECTED]
Acked-by: Shinya Kuribayashi [EMAIL PROTECTED]
---
cpu/mips/start.S |4
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/cpu/mips/start.S b/cpu/mips/start.S
index 0a69109..57db589 100644
--- a/cpu/mips/start.S
+++ b/cpu/mips/start.S
@@ -243,9
Jean-Christophe PLAGNIOL-VILLARD wrote:
On 22:27 Mon 08 Sep , Jean-Christophe PLAGNIOL-VILLARD wrote:
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
---
doc/README.qemu_mips | 67
+++--
1 files changed, 58 insertions(+),
Jean-Christophe PLAGNIOL-VILLARD wrote:
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD [EMAIL PROTECTED]
---
Use CFG_MONITOR_LEN instead of value
include/configs/qemu-mips.h |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/include/configs/qemu-mips.h
Hi Wolfgang,
please pull U-Boot/MIPS repository to pick up the following changes.
Thanks in advance,
Shinya
---
The following changes since commit 2145188bea2df8f2b47a87ec3071b55027e8d0ae:
Ben Warren (1):
Fix compile error in building MBX860T.
are available in the git repository
Signed-off-by: Shinya Kuribayashi [EMAIL PROTECTED]
---
Hi Jean,
in the commit 6d0f6bcf (rename CFG_ macros to CONFIG_SYS), this README
file was added into ${TOPDIR} dir. Was this intended?
Thanks,
Shinya
README.nios_CONFIG_SYS_NIOS_CPU | 140 ---
doc
Jean-Christophe PLAGNIOL-VILLARD wrote:
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
---
doc/README.qemu_mips | 37 -
1 files changed, 36 insertions(+), 1 deletions(-)
Applied and pushed out, thanks.
One comment bellow.
diff
Jean-Christophe PLAGNIOL-VILLARD wrote:
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
---
doc/README.qemu_mips | 67 +++--
1 files changed, 58 insertions(+), 9 deletions(-)
Applied and pushed out, thanks.
By the way, let
Hi Wolfgang,
please pull U-Boot/MIPS repository to pick up the following changes.
Thanks in advance,
Shinya
---
The following changes since commit aced78d852d0b009e8aaa1445af8cb40861ee549:
Wolfgang Denk (1):
Prepare 2009.01-rc1
are available in the git repository at:
it is mandatory but it is in the majority in u-boot.
If it's not mandatory, please drop all aliases. That saves source code
size (not generated u-boot image size) a little bit. Majority or not
does not make sense here.
--
Shinya Kuribayashi
NEC Electronics
Joakim Tjernlund wrote:
- There is no purely weak functions and therfore no longer code like:
if (do_something)
do_somthing();
All instances have been replaced by empty functions with an alias. e.g.
void __do_something (args) {}
do_something(args) __atttribute__((weak,
in the same manner.
--
Shinya Kuribayashi
NEC Electronics
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Joakim Tjernlund wrote:
Checking for NULL before invocation won't work unless you fix the relocation
routine not to relocate NULL values. That is what I have been trying to say
several times now. That fix should be performed regardless so no nasty
surprises will happen in the future. Perhaps
Ping? This should go into the v2009.01 release.
Jean-Christophe PLAGNIOL-VILLARD wrote:
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
---
.../README.nios_CONFIG_SYS_NIOS_CPU|0
1 files changed, 0 insertions(+), 0 deletions(-)
rename
discussions
precisely.
Any MIPS tool chain experts out there to try and follow-up for MIPS
what Albert is doing for ARM right now?
I'll have a look at what's discussed, then think about what to do.
--
Shinya Kuribayashi
Renesas Electronics
___
U-Boot
On 07/21/2010 07:27 PM, Xiangfu Liu wrote:
form the document about OUTPUT_FORMAT(default, big, little)
If neither -EB nor -EL are used, output format will be the first argument.
If -EB is used, the output format will be the second argument.
If -EL is used, the output format will be the third
On 7/27/10 12:06 AM, Xiangfu Liu wrote:
what about split this patch to two:
one is all *.lds files,
the other one is for the argument,
Sounds good.
I have one question here. if we decete the board cpu by
CONFIG_CPU_LITTLE_ENDIAN.
why we need check the toolchina again.
The answer is
(_start)
SECTIONS
According to MAKEALL script, pb1000_config is only used in Little-
endian, so its default endian should be set to LE as well. I too
missed this point in my previous patch.
With fixing above nits, feel free to add:
Acked-by: Shinya Kuribayashi skuri...@pobox.com
Wolfgang
On 08/04/2010 12:29 AM, Xiangfu Liu wrote:
On 08/03/2010 07:36 PM, Shinya Kuribayashi wrote:
Aconfccording to MAKEALL script, pb1000_ig is only used in Little-
endian, so its default endian should be set to LE as well. I too
missed this point in my previous patch.
thanks.
You still forgot
On 08/12/2010 03:15 AM, Heiko Schocher wrote:
This patch series add full relocation and cache support for arm
based boards. I test this for arm1136, arm_cortexa8 and arm926ejs
based boards.
Relocation support:
!! This change is not compatible to old code !!
If you want to compile in
On 08/12/2010 09:50 PM, Shinya Kuribayashi wrote:
It would be gratefull if someone could expalain a bit about this big
change. What's the primary motivation for full relocation?
Forgot to mention; the reason why I'd like to know is, because I'm
an ARM newbie, and interested in such topics
On 8/13/10 5:17 AM, Wolfgang Denk wrote:
http://elinux.org/CELF_Project_Proposal/Rework_ARM_architecture_support_in_U-Boot
Yes, this is the one.
[snip[
If you read the thread you can see that both Heikos tests and other
testers who tried that code see dramatic speed improvements due to
On 8/30/10 6:53 PM, Xiangfu Liu wrote:
can we apply those patch to MIPS-branch first??
[PATCH 1/2] update the MIPS u-boot.lds
I'll push 1/2 to u-boot-mips and request pull later.
[PATCH 2/2] change the way of build little endian board
but this 2/2 looks problematic.
As said in the previous
On 8/30/10 10:43 PM, Xiangfu Liu wrote:
[PATCH 2/2] change the way of build little endian board
but this 2/2 looks problematic.
As said in the previous mail the patch is tentative and won't
work with ELDK, and as fas as I could see nothing has been
changed since my version. Let me make
with ELDK, and as fas as I could see nothing has been
changed since my version.
So I'm overlooking something, will have to think about it.
--
Shinya Kuribayashi
Renesas Electronics
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman
On 8/31/2010 10:00 AM, Xiangfu Liu wrote:
xian...@openmobilefree:~/u-boot/u-boot.git$ file u-boot
u-boot: ELF 32-bit LSB executable, MIPS, MIPS32 version 1 (SYSV), statically
linked, not stripped
My bad sorry. Could you provide output from readelf?
$ readelf u-boot
--
Shinya Kuribayashi
On 8/31/2010 10:36 AM, Shinya Kuribayashi wrote:
As said in the previous mail the patch is tentative and won't
work with ELDK, and as fas as I could see nothing has been
changed since my version.
So I'm overlooking something, will have to think about it.
Oh, I remember now. The aim
The following changes since commit bd2313078114c4b44c4a5ce149af43bcb7fc8854:
Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master (2010-08-18
21:16:35 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-mips.git master
Xiangfu Liu (1):
MIPS: update
On 11/24/11 10:57 PM, Daniel Schwierzeck wrote:
diff --git a/arch/mips/cpu/mips32/start.S b/arch/mips/cpu/mips32/start.S
index 9c1b2f7..b6cb4be 100644
--- a/arch/mips/cpu/mips32/start.S
+++ b/arch/mips/cpu/mips32/start.S
@@ -224,6 +224,14 @@ reset:
setup_c0_status_reset
+ /* Set
On 11/24/11 10:57 PM, Daniel Schwierzeck wrote:
@@ -206,11 +206,28 @@ _start:
RVECENT(romReserved,125)
RVECENT(romReserved,126)
RVECENT(romReserved,127)
+ XVECENT(romExcHandle,0x400);
+ RVECENT(romReserved,129);
+ RVECENT(romReserved,130);
+
On 12/4/11 9:02 PM, Daniel Schwierzeck wrote:
diff --git a/boards.cfg b/boards.cfg
index c83d861..2cd917e 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -324,13 +324,13 @@ dbau1000 mipsmips32
dbau1x00-
dbau1100 mipsmips32
On 5/27/11 2:44 AM, Pandurang Kale wrote:
Has any one implemented it for MIPS based platform? If not, any hint to
get it working.
https://www.ibm.com/developerworks/mydeveloperworks/blogs/ddou/entry/implementing_mips_interrupts_for_u_boot28?lang=en
: *** [lib_generic/libgeneric.a] Error 2
Import relevant header file from LMO tree (slightly modified to U-Boot).
Reported-by: Himanshu Chauhan himan...@symmetricore.com
Signed-off-by: Shinya Kuribayashi shinya.kuribaya...@necel.com
---
Himanshu Chauhan wrote:
I see that in include directory asm
Stefan Roese wrote:
On Friday 18 December 2009 13:04:59 Himanshu Chauhan wrote:
Import relevant header file from LMO tree (slightly modified to U-Boot).
Why don't you import this file from the Linux tree? This should work
without modifications. And that's what we've done for PPC and ARM as
Himanshu Chauhan wrote:
Himanshu Chauhan wrote:
I see that in include directory asm points to asm-mips. Inside
asm-mips there is another link arch-arch-mips which is a dead link.
THere is no directory named arch-mips there.
This is another topic, let's ignore here.
Is arch-mips scheduled
1 - 100 of 157 matches
Mail list logo
