Hello,
I have been working for a while trying to port U-Boot over to a MIPS AR7161 SoC
chip.
The actual product is a Buffalo WZR-HP-AG300H router.
I have been making quite a bit of successful progress, bu the two FLASH chip
archetecture is throwing me off a little.
There are two FLASH chips,
If this is not the correct place to post this, please direct to a more
appropriate place, as most of the traffic I see on this list is for commits and
patches.
I am currently working with a device that has lost its boot loader and
attempting to reload the device.
I have full debug access
configuraration.
Thank you for the source for this, I will attempt to resolve the remaining
issues.
When I have resolved them, I would be happy to share the results.
Allan
From: Dmytro [dioptimi...@gmail.com]
Sent: Monday, December 03, 2012 01:28
To: Drassal, Allan
Cc
Hello all:
I am attempting to recover the ART Atheros Radio Test EEPROM data for a
router and am attempting to copy the data from one router to the other, which
may not be the best of ideas, but the two boards are identical and purchased at
the same time...
The command progmac seems to be
:31
To: Drassal, Allan
Cc: U-Boot Mailing List
Subject: Re: Atheros ART data crc calculation
Hello again Allan,
Can you on work device (with correct ART section and with no checksum
error), enter the u-boot command - printenv ?
Also would you please share your ART section of the same device?
Idea
reset
From: Dmytro [dioptimi...@gmail.com]
Sent: Friday, December 14, 2012 15:31
To: Drassal, Allan
Cc: U-Boot Mailing List
Subject: Re: Atheros ART data crc calculation
Hello again Allan,
Can you on work device (with correct ART section and with no checksum
I have posted instructions in the following place, please take a look.
I have been able to do a full dump and reload of the DreamPlug.
I would be more than happy to entertain any questions.
http://www.newit.co.uk/forum/index.php/topic,1977.0.html
I have also built a current version of openocd
I am attempting to create a U-Boot image for a router, Buffalo WZR-HP-AG300H,
details can be found here, http://wiki.openwrt.org/toh/buffalo/wzr-hp-ag300h.
I am having trouble compiling and/or finding a pre-compiled version of U-Boot
for it.
I am attempting to recover a router that has its
-Original Message-
From: Daniel Schwierzeck [mailto:daniel.schwierz...@gmail.com]
Sent: Wednesday, November 28, 2012 9:16 AM
To: Drassal, Allan
Cc: u-boot@lists.denx.de
Subject: Re: [U-Boot] U-Boot for MIPS AR7161
Hi Allan,
2012/11/27 Drassal, Allan dra...@wsu.edu:
I am
-area-phys 0xa060 -work-area-size 0x2
# serial SPI capable flash
# flash bank driver base size chip_width bus_width
From: Luka Perkov [l...@openwrt.org]
Sent: Thursday, November 29, 2012 01:21
To: Dmytro
Cc: Drassal, Allan; U-Boot Mailing List
bus_width
From: Dmytro [dioptimi...@gmail.com]
Sent: Friday, November 30, 2012 16:11
To: Drassal, Allan
Cc: Luka Perkov; U-Boot Mailing List
Subject: Re: [U-Boot] U-Boot for MIPS AR7161
Hi Allan Drassal,
Frankly, I'm not in practice faced ar71xx processors
-boun...@lists.denx.de] on behalf of
Drassal, Allan [dra...@wsu.edu]
Sent: Friday, November 30, 2012 20:14
To: Dmytro
Cc: Luka Perkov; U-Boot Mailing List
Subject: Re: [U-Boot] U-Boot for MIPS AR7161
Hi Dmytro,
Thanks for your detailed response. I corrected some details in the ar71xx.cfg
file
Sorry I need to shorten the message, exchange keeps trying to do something and
I keep getting a message rejected due to No base64 encoded MIME text parts
allowed
U-Boot list keeps rejecting the message.
U-Boot list driving me nuts... keeps rejecting my message due to the No base64
encoded MIME
13 matches
Mail list logo