@Andres:
About $script_security, yes, we also need it to be passed as an option.
And yes, something similar to what you propose just might take the best
of both worlds : use start-stop-daemon to avoid failure on start when a
PID file is not deleted, and still have our $script_security and boot-
Apparently this is the (successful) smbclient output you get once you edited
the smb.conf file so that bcast is tried before host. I need the smbclient
trace for a failure case... Could you restore the original smb.conf file (the
one that fails) temporarily and regenerate/attach the resulting
I think it's a hostname resolution issue on the client side, due to mismatch
between DNS hostname and NetBIOS name. Could you run:
smbclient -d 4 -N -L //servername
on the client in both cases and post the corresponding output ?
** Changed in: samba (Ubuntu)
Status: New = Incomplete
--
*** This bug is a duplicate of bug 330833 ***
https://bugs.launchpad.net/bugs/330833
** This bug has been marked a duplicate of bug 330833
NetworkManager always overwrites default route when connecting to OpenVPN
network
--
Enabling VPN connection in NetworkManager messes up routing
*** This bug is a duplicate of bug 329974 ***
https://bugs.launchpad.net/bugs/329974
** This bug is no longer a duplicate of bug 368273
Jaunty 9.04 Blind to XP's Shared Network Printer
** This bug has been marked a duplicate of bug 329974
system-config-printer.py SIGSEGV in
*** This bug is a duplicate of bug 329974 ***
https://bugs.launchpad.net/bugs/329974
** This bug is no longer a duplicate of bug 368273
Jaunty 9.04 Blind to XP's Shared Network Printer
** This bug has been marked a duplicate of bug 329974
system-config-printer.py SIGSEGV in
Reopening as this is not fixed in Jaunty, multiple reports show.
According to duplicate bug 368273 this seems to be hitting i386 but not
amd64, which might be the reason why Brian failed to reproduce it.
A workaround to be able to create printers (using IP address) is
described in
*** This bug is a duplicate of bug 329974 ***
https://bugs.launchpad.net/bugs/329974
** This bug has been marked a duplicate of bug 329974
system-config-printer.py SIGSEGV in _nss_dns_gethostbyname2_r(), adding a
printer, i386 only
--
Jaunty 9.04 Blind to XP's Shared Network Printer
*** This bug is a duplicate of bug 329974 ***
https://bugs.launchpad.net/bugs/329974
** This bug has been marked a duplicate of bug 329974
system-config-printer.py SIGSEGV in _nss_dns_gethostbyname2_r(), adding a
printer, i386 only
--
print configuration crashed while adding printer
** Summary changed:
- system-config-printer.py SIGSEGV in _nss_dns_gethostbyname2_r(), adding a
printer, i386 only
+ SIGSEGV in _nss_dns_gethostbyname2_r() browsing Samba printers, i386 only
--
SIGSEGV in _nss_dns_gethostbyname2_r() browsing Samba printers, i386 only
A nearly identical crash in _nss_dns_gethostbyname2_r is tracked in bug
329974. I suspect it's coming from the same bug.
This seems to be affecting i386 only.
Opening a samba task since the crash is probably libsmbclient-related.
** Also affects: samba (Ubuntu)
Importance: Undecided
*** This bug is a duplicate of bug 359088 ***
https://bugs.launchpad.net/bugs/359088
** This bug has been marked a duplicate of bug 359088
system-config-printer.py crashed with SIGSEGV in
_nss_mdns4_minimal_gethostbyname2_r()
--
with trial cd, tried to browse for a windows xp printer
Hm, I am struggling with the root cause of this. It is a Jaunty-specific
issue, but the libsmbclient code shown in the trace didn't really change
since Intrepid... However the glibc code (where the SIGSEGV ultimately
occurs) did change. In particular sysdeps/posix/getaddrinfo.c. So maybe
it's a
So it seems that local access (tux-tux) is working correctly. Could you
try to access tux with smbclient from another machine (or access another
machine from tux) and send the corresponding smbclient log ? (using the
original, failing name resolve order set on the client, please)
Also could you
Can't reproduce that on Jaunty. On my laptop, switching to VC1 before
logging into Gnome (and having NM connect to my wireless) smbd and nmbd
(default smb.conf) are running, listening to *.*
Could you tell me what version of Ubuntu you're running and attach your
smb.conf ?
** Changed in: samba
We are closing this bug report because it lacks the information we need
to investigate the problem, as described in the previous comments.
Please reopen it if you can give us the missing information, and don't
hesitate to submit bug reports in the future. To reopen the bug report
you can click on
We'd like to figure out what's causing this bug for you, but we haven't
heard back from you in a while. Could you please provide the requested
information? Thanks!
--
Samba update crashed
https://bugs.launchpad.net/bugs/314318
You received this bug notification because you are a member of Ubuntu
We are closing this bug report because it lacks the information we need
to investigate the problem, as described in the previous comments.
Please reopen it if you can give us the missing information, and don't
hesitate to submit bug reports in the future. To reopen the bug report
you can click on
** Changed in: samba (Ubuntu)
Status: Incomplete = Invalid
--
Cant install samba
https://bugs.launchpad.net/bugs/314494
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to samba in ubuntu.
--
Ubuntu-server-bugs mailing list
We are closing this bug report because it lacks the information we need
to investigate the problem, as described in the previous comments.
Please reopen it if you can give us the missing information, and don't
hesitate to submit bug reports in the future. To reopen the bug report
you can click on
Reproduced on Jaunty:
$ net usershare add My Shared Folder /home/user/My Shared Folder
$ net usershare list
my shared folder
Workaround:
$ mv /var/lib/samba/usershares/my shared folder /var/lib/samba/usershares/My
Shared Folder
$ net usershare list
My Shared Folder
** Changed in: samba
Unfortunately I couldn't reproduce the issue. I can set up Samba-shared
printers on 9.04 / i386 without a crash. Maybe it's linked to Windows XP
shared printers...
@Ed Comer or other reproducers:
If the issue is linked to the glibc bug, then it should be fixed in Karmic (the
glibc patch was
I can confirm the sad tale of woe with the OpenLdap tutorial on Jaunty.
It took me a while to figure out that pasting the syncrepl config text
into an ldif file didn't work. When I ran ldapmodify on that ldif, it
would skip over parts of the file. As a consequence, things like the
Hm, that wouldn't work, Karmic glibc still has patches/any/local-
ipv6-lookup.diff so the test wouldn't prove anything. Please ignore what
I just said.
--
SIGSEGV in _nss_dns_gethostbyname2_r() browsing Samba printers, i386 only
https://bugs.launchpad.net/bugs/329974
You received this bug
I switched to the amd64 version of 9.04 and can no longer reproduce the
bug since it isn't resident in the 64-bit version.
--- On Fri, 5/15/09, Thierry Carrez thierry.car...@ubuntu.com wrote:
From: Thierry Carrez thierry.car...@ubuntu.com
Subject: [Bug 329974] Re: SIGSEGV in
** Changed in: nagios-plugins (Debian)
Status: Unknown = Confirmed
--
[SRU] Buffer overflow in check_ntp_peer - Nagios can't check time servers in
Intrepid
https://bugs.launchpad.net/bugs/291265
You received this bug notification because you are a member of Ubuntu
Server Team, which is
I set the smb.conf back to the default and here is the output of your 2
commands. These 2 commands take a while as it seems to time out after a
bit. If I run them with my modified smb.conf, they execute instantly
and show a lot of info on my network, with no apparent error messages.
Could you
The problem is apparently in your DNS resolution. Basically the master
browser says that UPSTAIRS exists. But when you browse it tries to
resolve UPSTAIRS to an IP address...
With the default resolve order, it tries DNS resolution before
broadcast. For some reason (I suspect a DNS that answers
unfortunately, I have the same bug (
Ubuntu 9.04.
I've found an another workaround:
- remove files with *.pub extension from ~.ssh folder
I don't have an idea, but may this issue is connected with seahorse agent?
Any help would be appreciated
--
openssh public key auth broken if one has many
ping upstairs does indeed try to resolve 67.63.55.3. This IP address is
nowhere in my network. ping does resolve it, but it takes about 23
ms. I have no idea why this should be. I have the exact same problem
on 2 different networks in 2 different towns using different brands of
routers. They
One last thought. If the default resolve order is using DNS before
broadcast, doesn't that slow down local network browsing? Since this
may turn out to be an ISP problem on my end, wouldn't it make sense to
change the default resolve order so it looks at the local network before
trying DNS?
** Also affects: mysql-dfsg-5.0 (Ubuntu)
Importance: Undecided
Status: New
--
View ast_sipfriends_gs anlegen auf Slave MySQL geht nicht
https://bugs.launchpad.net/bugs/351693
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to
Just forwarded it to Debian.
** Changed in: php5 (Ubuntu)
Status: New = Triaged
--
Please remove language bias from php5-cli package description
https://bugs.launchpad.net/bugs/329900
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed
** Changed in: php5 (Debian)
Status: Unknown = New
--
Please remove language bias from php5-cli package description
https://bugs.launchpad.net/bugs/329900
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to php5 in ubuntu.
--
dpkg-query -W -f='${Package} ${Version} ${Source} ${Status}\n' | grep
samba
libpam-smbpass 2:3.3.2-1ubuntu3 samba install ok installed
libsmbclient 2:3.3.2-1ubuntu3 samba install ok installed
libwbclient0 2:3.3.2-1ubuntu3 samba install ok installed
samba 2:3.3.2-1ubuntu3 install ok installed
** Changed in: debian
Status: Fix Committed = Fix Released
--
[needs-packaging] gnote in karmic
https://bugs.launchpad.net/bugs/364931
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Thank you for your bug report. Could you please test this in Ubuntu
9.04 (Anjuta 2.26.0.0). The search has been modified and I am unable to
reproduce this problem.
** Changed in: anjuta (Ubuntu)
Status: Triaged = New
** Changed in: anjuta (Ubuntu)
Status: New = Incomplete
--
Hello!
On my standalone player SHARP DV-SV92 DVD-Video disks created by the program
genisoimage are not played. I tried packages genisoimage of versions 1.1.2,
1.1.6 and 1.1.9. But there is no difference, DVD disks are not played.
DVD-Video disks created by the program mkisofs (from cdrtools
Public bug reported:
Binary package hint: dmraid
Data I need to gather -
dmraid_activate -x log
and or
why dmraid_activate isn't running.
** Affects: dmraid (Ubuntu)
Importance: Undecided
Assignee: Robert Collins (lifeless)
Status: Confirmed
** Changed in: dmraid (Ubuntu)
If you are getting this problem could you please attach the file
.anjuta/session/anjuta.session (or anyother file that moving causes the
problem to go away)
** Summary changed:
- Anjuta freeze at startup
+ Hang on splashscreen on startup
--
Hang on splashscreen on startup
edit d-a, log to /dev/.initramfs/foo, set -x
--
dmraid not activating on boot
https://bugs.launchpad.net/bugs/376792
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Finally, A Creative X-Fi Driver Going Into ALSA
http://www.phoronix.com/scan.php?page=news_itempx=NzI3MA
--
Creative labs X-Fi sound card unsupported
https://bugs.launchpad.net/bugs/63352
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
Binary package hint: multisync
Using Multisync 0.82 on Ubuntu 2009.04
Multisync is useless if no plugins at all are installed.
I installed multisync-gui via Add/Remove applications, and I could not
create a new synchronization pair, because the plugins drop-down lists
are
Public bug reported:
Binary package hint: gnome-power-manager
Nothing occurs in response to closing the lid on the HP 2140.
/proc/acpi/
/proc/acpi/button/lid/C1C4/state correctly reads either
state: open
or
state: closed
depending on the state of the lid. Gnome-power-manager is
This is still happening for me even with 2.6.28-11. I get dropped to a
shell each time I boot. I type mdadm -As ; exit and it activates my
raid arrays and continues booting normally. Is this supposed to happen
automatically somewhere as part of the boot process? Is there a config
file I should
Public bug reported:
Binary package hint: nvidia-glx-180
I don't know if htere is a time or work component to this. I'll add details as
I observe things.
login
do stuiff
logout
# login screen fails to come up again. After 10 minutes or so the safe-x screen
comes up, but wrapped around the
Public bug reported:
Firefox 3.0.10 on Jaunty.
When adding a bookmark with the option to always erase personnal
information (edition menu, options, private life - a guess, since my
system is not in english), the bookmark added during the session will be
erased when closing Firefox.
This is not
Public bug reported:
Internal microphone produces no sound on the HP 2140 in Jaunty. Tested
with gnome-sound-recorder and ekiga.
lspci says:
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition
Audio Controller (rev 01)
amixer says:
Simple mixer control 'Master',0
Gnome power manager Version 2.24.2 in Jaunty
--
HP 2140 Lid Close Not Detected
https://bugs.launchpad.net/bugs/376793
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Running 2.6.28-12-generic in jaunty, which has Advanced Linux Sound
Architecture Driver Version 1.0.18rc3.
--
HP 2140 Internal Microphone doesn't work
https://bugs.launchpad.net/bugs/376795
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Is this a regression from gutsy?
The patch (http://bugs.linuxbase.org/attachment.cgi?id=1354) seems to
change several different thing, and also has some whitespace changing
which make it a bit difficult to read. Could you perhaps point to the
individual bzr commits, so that the changes can be
IT IS ONE issue...@**!! No test to speech engine for ubuntu will work in your
ubuntu 9.04!! GAVE YOU THE LINKS! SUT YOUR MOTH! OPEN YOUR EYES AND LOOK AT
THEM!
What is the problm?
The older version of linux work! Why don't yours?
This bug was fixed in the package bluez - 4.39-0ubuntu1
---
bluez (4.39-0ubuntu1) karmic; urgency=low
* New upstream release (LP: #372428)
- Add workaround for dealing with unknown inquiry complete.
- Fix discovering when using software scheduler.
- Fix wrong
This bug was fixed in the package pyrex - 0.9.8.5-1ubuntu1
---
pyrex (0.9.8.5-1ubuntu1) karmic; urgency=low
* Merge from debian unstable (LP: #371991), remaining changes:
- Pass --install-layout=deb to setup.py so it doesn't install in /usr/local
pyrex (0.9.8.5-1) unstable;
** Summary changed:
- anjuta crashed with SIGSEGV in build_program_callback()
+ Crash configuring project (build_program_callback)
--
Crash configuring project (build_program_callback)
https://bugs.launchpad.net/bugs/361183
You received this bug notification because you are a member of Ubuntu
** Summary changed:
- anjuta crashed with SIGSEGV in gdl_dock_item_show_item()
+ Crash building project (gdl_dock_item_show_item)
--
Crash building project (gdl_dock_item_show_item)
https://bugs.launchpad.net/bugs/325668
You received this bug notification because you are a member of Ubuntu
Thanks for your bug report. Could you please update to the latest
Anjuta in Jaunty (2.26.0.0) and see if this still occurs?
** Summary changed:
- [jaunty] anjuta crashed with SIGSEGV in gtk_tree_model_get_valist()
+ Crash expanding filter section in Git log viewer (gtk_tree_model_get_valist)
** Attachment added: CoreDump.gz
http://launchpadlibrarian.net/26748029/CoreDump.gz
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/26748030/Dependencies.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/26748031/ProcMaps.txt
** Attachment added:
Do you know if these changes are on purpose:
omparing ./irssi_0.8.12-6ubuntu1_amd64.deb and
/var/cache/pbuilder/result/irssi_0.8.13-1ubuntu1_amd64.deb
[The following lists of changes regard files as different if they have
different names, permissions or owners.]
Files in second .deb but not in
this doesn't affect lxml at all
** Changed in: lxml
Status: New = Invalid
--
openerp-server depends on python-xml and is therefore uninstallable ATM
https://bugs.launchpad.net/bugs/337759
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
this doesn't affect lxml at all
** Changed in: lxml (Ubuntu)
Status: New = Invalid
--
openerp-server depends on python-xml and is therefore uninstallable ATM
https://bugs.launchpad.net/bugs/337759
You received this bug notification because you are a member of Ubuntu
Bugs, which is
File to reproduce the crash.
** Attachment added: 2001_these_mezouar.pdf
http://launchpadlibrarian.net/26748206/2001_these_mezouar.pdf
--
pdftotext crashed with signal 24 in Lexer::lookChar()
https://bugs.launchpad.net/bugs/376799
You received this bug notification because you are a member
Here is the minimal command to reproduce the crash:
pdftotext -q nopgbrk 2001_these_mezouar.pdf
With the -q nopgbrk the crash does not happen.
--
pdftotext crashed with signal 24 in Lexer::lookChar()
https://bugs.launchpad.net/bugs/376799
You received this bug notification because you are a
Printer state reads Processing - /usr/lib/cups/filter/cpdftocps failed
On Thu, May 14, 2009 at 11:44 PM, JD Francis
spinstartsh...@googlemail.comwrote:
Public bug reported:
I dunno why but I cannot print anything with this printer. Using the
new packages in the Ubuntu repositories.
**
Public bug reported:
Binary package hint: xorg
This could be video driver/metacity/xorg related - I'm not sure at this
point.
Anyhow, firing up inkscape and just resizing the window for a minute
pushes Xorgs appparent memory use up by about 10MB.
Closing inkscape doesn't release the memory.
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/26748293/Dependencies.txt
** Attachment added: LsHal.txt
http://launchpadlibrarian.net/26748294/LsHal.txt
** Attachment added: LsMod.txt
http://launchpadlibrarian.net/26748295/LsMod.txt
** Attachment added: LsPci.txt
SRU Proposal to fix the package: debdiff attached and package uploaded to
hardy-proposed. The patch contains the upstream commits 135, 136, and 137 from
http://bzr.openprinting.org/foomatic-3.0/foomatic-filters which fix the LSB
test failures.
** Attachment added: debdiff to fix the LSB test
AFAIK it is a regression from Gutsy as the commit leading to the failure
was only introduced in Hardy. Jeff, can you do the LSB test on Gutsy?
--
Hardy foomatic-rip PageSetup is broken, fails LSB tests
https://bugs.launchpad.net/bugs/376732
You received this bug notification because you are a
** Changed in: anjuta (Ubuntu)
Status: Triaged = New
--
Crash configuring project (build_program_callback)
https://bugs.launchpad.net/bugs/361183
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Couldn't we just backport this to Jaunty?
--
mapnik-python does not build against default python
https://bugs.launchpad.net/bugs/354205
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
** Summary changed:
- anjuta crashed with SIGSEGV in g_closure_invoke()
+ Crash enabling valgrind plugin (gtk_tree_view_button_press)
** Changed in: anjuta (Ubuntu)
Status: Triaged = New
--
Crash enabling valgrind plugin (gtk_tree_view_button_press)
*** This bug is a duplicate of bug 361524 ***
https://bugs.launchpad.net/bugs/361524
Thanks for the bug report. Could you please explain what button/menu
you clicked on; I can't find an Add to project. Please attach a
screenshot/screencast if possible.
** Changed in: anjuta (Ubuntu)
*** This bug is a duplicate of bug 267408 ***
https://bugs.launchpad.net/bugs/267408
** Tags removed: need-duplicate-check
** Attachment removed: Dependencies.txt
http://launchpadlibrarian.net/26748520/Dependencies.txt
** Attachment removed: ProcMaps.txt
With the -q nopgbrk the crash does not happen.
I mean Without.
--
pdftotext crashed with signal 24 in Lexer::lookChar()
https://bugs.launchpad.net/bugs/376799
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
** Summary changed:
- Anjuta 2.02 does not support single-file builds
+ Support single file builds
** Changed in: anjuta (Ubuntu)
Importance: Low = Wishlist
--
Support single file builds
https://bugs.launchpad.net/bugs/63129
You received this bug notification because you are a member of
To reproduce:
Download the upstream source of foomatic-filters 4.0.0 or newer:
wget http://www.openprinting.org/download/foomatic/foomatic-
filters-4.0.1.tar.gz
Go into the test/ subdirectory and run
sudo ./testfoomaticrip
This tests the system's foomatic-rip
You can slo run any foomatic-rip
Note: Hardy's foomatic-rip is the SRUed one: 3.0.2-20071204-0ubuntu2.1
--
Hardy foomatic-rip PageSetup is broken, fails LSB tests
https://bugs.launchpad.net/bugs/376732
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Thank you for your bug report.
Can you attach a copy of the file at $HOME/.cache/notify-osd.log?
Thanks
** Changed in: notify-osd (Ubuntu)
Status: New = Incomplete
--
notify-osd is infinitly called
https://bugs.launchpad.net/bugs/376554
You received this bug notification because you
It appears the problem has been resolved with the latest update:
xserver-xorg-video-intel:
Installed: 2:2.6.3-0ubuntu9.2
Candidate: 2:2.6.3-0ubuntu9.2
Version table:
*** 2:2.6.3-0ubuntu9.2 0
500 http://ftp.telfort.nl jaunty-proposed/main Packages
100 /var/lib/dpkg/status
Matthias could you please answer Steve's question.
Package maintainers: is it possible to get lbc6-v9v into amd64?
** Package changed: Ubuntu Jaunty = glibc (Ubuntu Jaunty)
** Changed in: glibc (Ubuntu Jaunty)
Status: New = Incomplete
** Changed in: glibc (Ubuntu)
Status: New =
I can confirm that it worked again using a newly generated 2048bit RSA
key. I had a 2047 Bit key before.
--
openssh-client (amd64) can't login after upgrade to jaunty
https://bugs.launchpad.net/bugs/357998
You received this bug notification because you are a member of Ubuntu
Bugs, which is
** Changed in: kdesdk
Status: Confirmed = Fix Released
--
Kate crashed and caused the signal 6 (SIGABRT).
https://bugs.launchpad.net/bugs/306124
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Public bug reported:
I was browsing using Firefox. I was notified that there are some
updates. I was shown that kernel 2.6.27-14 is also available among
others. I asked it to proceed and install them. It downloaded the
updates. It was trying to install it, but before the installation dialog
goes
Public bug reported:
rationale:
UBUNTU EVERYWHERE!!!
- not all my files are everywhere
- my favorite programs/setting are @home
- net-books are to sexy
- laptops are to light
- i don't have install rights @school
- they don't have ubuntu at work (the sacrilege!!!)
- people are questioning my
StacktraceTop:?? ()
?? ()
?? ()
?? ()
?? ()
** Attachment added: Stacktrace.txt (retraced)
http://launchpadlibrarian.net/26748758/Stacktrace.txt
--
pdftotext crashed with signal 24 in Lexer::lookChar()
https://bugs.launchpad.net/bugs/376799
You received this bug notification because you are
I don't know if this a relevant comment to toss into the mix, but a
sudo gnome-system-monitor shows all the other processes that are
probably daemons and anything run in sudo, as far as I can tell. I find
no sudo in my process list in non-sudo-ed gnome-system-monitor. For sake
of simplicity, I
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/26748830/BootDmesg.txt
** Attachment added: CurrentDmesg.txt
http://launchpadlibrarian.net/26748831/CurrentDmesg.txt
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/26748832/Dependencies.txt
**
** Attachment added: ThreadStacktrace.txt (retraced)
http://launchpadlibrarian.net/26748759/ThreadStacktrace.txt
** Tags added: apport-failed-retrace
** Tags removed: need-i386-retrace
--
pdftotext crashed with signal 24 in Lexer::lookChar()
https://bugs.launchpad.net/bugs/376799
You
I installed gmobilemedia from Add/Remove and ran into this bug. So I
opened a terminal and typed this:
sudo ln -s /usr/lib/python2.6/dist-packages /usr/lib/python2.6/site-
packages
And now gmobilemedia starts as it should :-)
Cheers,
Raoul Nicolas
http://nrw.free.fr
--
python: can't open file
I think the package was updated at the moment because it has been
installed well. So I think it's OK to close this bug.
m...@ubuntu:~$ apt-cache policy apport
apport:
Installed: 1.0-0ubuntu5.2
Candidate: 1.0-0ubuntu5.2
Version table:
*** 1.0-0ubuntu5.2 0
500
Gutsy's foomatic-rip (3.0.2-20070719-0ubuntu1) has no failure in the LSB
tests.
** Changed in: foomatic-filters (Ubuntu Hardy)
Status: New = Triaged
--
Hardy foomatic-rip PageSetup is broken, fails LSB tests
https://bugs.launchpad.net/bugs/376732
You received this bug notification
At the moment no apport update can be found in Update Manager window and
sudo apt-get install apport tells me that I have the latest version
installed.
** Changed in: apport (Ubuntu)
Status: New = Fix Released
--
package apport 1.0-0ubuntu5 failed to install/upgrade: subprocess new
Also the foomatic-rip in Jaunty and current Karmic has no failure in the
LSB tests.
** Changed in: foomatic-filters (Ubuntu)
Status: New = Fix Released
** Changed in: foomatic-filters (Ubuntu Hardy)
Importance: Undecided = Medium
--
Hardy foomatic-rip PageSetup is broken, fails LSB
Second that, I get exactly the same behaviour with Jaunty and KDE 4
--
No display (blank screen) on log out
https://bugs.launchpad.net/bugs/179574
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Any tips on this? With NoAccel I sure can get to KDE and even the
resolution is right. But the performance is terrible! In Firefox
scrolling a page is sluggish and irritating, videos can't be played due
to the speed and glxgears gives 50FPS! It is unusable! Any ways to
increase the performance?
I
Reported upstream:
http://bugzilla.gnome.org/show_bug.cgi?id=582716
** Summary changed:
- search should open folded code in case of match
+ Seach term found inside folded text does not unfold block
** Bug watch added: GNOME Bug Tracker #582716
http://bugzilla.gnome.org/show_bug.cgi?id=582716
** Tags added: wishlist
--
[wishlist] Identity filename completion for ssh-add would be nice
https://bugs.launchpad.net/bugs/376546
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
'Me too' for i386 Hardy. I've noticed that /proc/partitions mentions
partitions (and disks) which don't exist.
--
lilo + lvm2 don't work following upgrade to breezy
https://bugs.launchpad.net/bugs/23835
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct
# lilo
Warning: LBA32 addressing assumed
Warning: '/proc/partitions' does not match '/dev' directory structure.
Name change: '/dev/dm-0' - '/dev/leonardo/system'
Warning: Name change: '/dev/dm-1' - '/dev/leonardo/storage'
Warning: Name change: '/dev/sdb' - '/dev/sdb'
Warning: Name change:
As stated in
https://bugs.launchpad.net/opensuse/+source/apparmor/+bug/271252/comments/21
bug was fixed and released in intrepid-updates. Anyone can confirm it
for intrepid? What about Jaunty? Still matters? Reporters please update
bug with that information.
** Changed in: apparmor (Ubuntu
1 - 100 of 1578 matches
Mail list logo