Hello,
I just tried again and all is OK. You may close this ticket.
Best regards,
Denis
--
When importing picture from web page to open office word ,word processor has
been closed
https://bugs.launchpad.net/bugs/318826
You received this bug notification because you are a member of Ubuntu
Hello,
Probably the same problem on Jaunty + OOo 3.1 from
http://ppa.launchpad.net/openoffice-pkgs/ppa/ubuntu
The crash appears when copying text images from Firefox, but not always ...
I succeeded to copy many pages from DPReview for the EP-1 but the 7th one
always crashes Writer. I have to
Hello Bryce,
My old PC has been replaced and I can't perform any test for the 9200SE ATI
board. So you may close this bug if you want.
I may test your solution for a Radeon™ HD 3200 Graphics, integrated in a
AMD 780G if you need it. I have no visual effect in standard but I can
get them when
Hello,
Same problem :
- my Canon A710 appears twice in Nautilus after being powered on
- gthumb can't access to it (camera is being used)
I must unmount the camera in Nautilus then manually run gthumb to be able to
import my photos.
For me, it was OK on Hardy and previous versions and this
Just to get a mail as a reminder !
Sorry ;-)
--
openoffice base : crash on closing a SRB report
https://bugs.launchpad.net/bugs/370981
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
No more crash problem ! Very nice to no more have to manage that error
...
Thank you for your help
regards
Denis
Note : I have been a bit surprised by the OOo 3.0 pop-up window at
stratup and checked with menu Help About, where the same OOo 3.0
also appears in big, but with the OOo 3.1 data
Hello !
Same problem on my PC with ATI Radeon 9200 SE RV280. It happened as soon as I
have been able to activate normal visual effects (bug :
https://bugs.launchpad.net/bugs/368219). When I go back to no visual effects
(+ reboot), the problem does not occur as long as I don't activate again
Another screen copy form the top of this page in Firefox !
Regards
Denis
** Attachment added: Corrupted font in Firefox
http://launchpadlibrarian.net/26530542/Pb_Police2-Firefox.png
--
[jaunty] fonts corrupts after a while
https://bugs.launchpad.net/bugs/326487
You received this bug
Searching on the web, I found another uBuntu bug that gave me a solution :
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-ati/+bug/354677
Just add Option BusType PCI to xorg.conf ... and I have now normal
visual effect !
Contents of my current xorg.conf (comments removed) :
Section
Some runs later :
- OOo crashes every time that a report has been ran when I try either to close
the report window or the main Base window.
- after crash, the new record(s) entered in the same run are lost after recovery
- if OOo is closed after having entered new records, reopened for running
Now on Jaunty ...
System freezes from time to time, Brasero is not involved in most of them !
Freezes seems to occur when a windows is being displayed (when changing from an
application to another) or refreshed (loading a new page in Firefox) AND the
mouse is moved at the same time.
The system
Please find attached 2 log files probably from OOo crashes
Regards
Denis
** Attachment added: 2 log files in /home
http://launchpadlibrarian.net/26477371/OOoBase-SRB%20crash.tar.gz
--
openoffice base : crash on closing a SRB report
https://bugs.launchpad.net/bugs/370981
You received this
Hello Bryce,
Please find attached the files you requested. Hope this may help !
Regards,
Denis
note 1 : xorg.conf is the standard one, not modified, and quite empty now as
compared to the Feisty version !
note 2 : the L70S+ monitor is now displayed as IQT in System Preference
Display (or
Public bug reported:
Jaunty 9.04 up to date + FontMatrix 0.4.2-2
When I look at a font, the 3rd tab on right part displays the glyphs /
characters of the font. But the lift that should allow to get down / up in the
page has no action. I can only look at the first 6 / 7 lines of the table.
Public bug reported:
Binary package hint: xserver-xorg-video-ati
Jaunty 9.04 up to date
ATI Radeon 9200 RV280 + Hyundai L70S+
Up to Feisty, I had no problem with my system : 3D effect without problem.
From Gutsy up to Intrepid, I had some problems (messy video when booting on
livecd, then after
Good news : it's OK on Jaunty alpha 5
After the boot from liveCD, the session screen is correctly displayed
and I can run applications without problem.
I just forgot to check wether 3D was present or not. Probably for next
time ... (boot from cd is so looong !)
Till 2 months to
I just tested my report with ubuntu 8.10 up to date, OOo 3.0 and SRB 1.05 (both
from OOo site) : no error !
The red arrow appears to signal an overflow, between the field value and the
container on the report, that occurs when the litteral are too long for the
container.
When I installed
Just tested Jaunty alpha 4 in livecd mode :
- no more high frequency problem
- always a messy video with correct mouse pointer ([Needs AGPMode quirk] messy
screen on radeon 9200SE
https://bugs.launchpad.net/bugs/164972 )
--
[RV280 9200se] monitor frequency too high
AGPMode needed: 4 (on Hardy)
Model: (Unknown) tower
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host
Bridge (rev 80)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200
lspci -nn | grep 00:00.0
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP]
Host Bridge [1106:3189] (rev 80)
lspci -nnvv | grep -A1 VGA compatible controller
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV280 [Radeon
9200 SE] [1002:5964] (rev 01)
For the messy video, I already filed a bug a long time ago ...
Last try with Jaunty in text mode. That gave the following xorg.conf and
the joined Xorg.0.log.
Section Device
Identifier Configured Video Device
EndSection
Section Monitor
Identifier Configured Monitor
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-ati/+bug/164972
set later as duplicate of
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-ati/+bug/313262
and now no 3D on Intrepid after frequency too high ... and Jaunty that does
not seem better (and includes freeze
Not really better with Jaunty : messy video with good mouse pointer as usual
...
I tried to copy Xorg.0.log on disk but experienced also a system freeze ...
I will wait for the official delivery !
--
[RV280 9200se] monitor frequency too high
https://bugs.launchpad.net/bugs/313262
You received
Please find attached the Xorg.0.log when booting with xorg.conf as
follows :
Section Device
Identifier Configured Video Device
Driver ati
Option ModeDebug true
EndSection
Section Monitor
Identifier Configured Monitor
EndSection
For the agp mode, I did not changed it because, when I ran livecd to
install Intrepid, I got a frequency too high message from my flat
screen. So I ran livecd in no error video mode (as read on a forum)
and installed Intrepid without problem. (I wrote in first post that I
got a messy video , but
** Attachment added: lspci results
http://launchpadlibrarian.net/21016821/lspci.vnn.txt
--
[RV280 9200se] no visual effects
https://bugs.launchpad.net/bugs/313262
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Does it really speak to you ? ;-))
** Attachment added: Xorg.0.log
http://launchpadlibrarian.net/21016834/Xorg.0.log
--
[RV280 9200se] no visual effects
https://bugs.launchpad.net/bugs/313262
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Public bug reported:
Since gutsy, I experience video problems with the radeon 9200 ... Now, I
can't select normal video effect. When I click on the button, a popup
opens for searching drivers, closes and I am back to the no effect
selection.
Intrepid 8.10 up to date, installed from scratch but a
** Attachment added: xorg.conf
http://launchpadlibrarian.net/20865029/xorg.conf
--
ati radeon 9200 no visual effect
https://bugs.launchpad.net/bugs/313262
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
It works with 0.7.0.1 version from your repository (on Intrepid).
For Hugin itself, my two main concerns :
- Hugin does not remember the current directory (used for the previous pano),
until we leave Hugin and restart it.
- Hugin does not propose any more a name for the file to create, as it was
Some tests later ...
I installed Ibex on a separate partition and added Hugin (0.7.0) : same problem
But as I use the same /home, I searched for a Hugin config file and delete a
.hugin file, then tried a new pano : OK ! No more Error 1 !
So it seems that .hugin file is part of the problem. May
** Attachment added: .hugin deleted that creates Error 1 problem
http://launchpadlibrarian.net/20709014/.hugin
--
hugin error 1
https://bugs.launchpad.net/bugs/310733
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
** Attachment added: new .hugin file that works
http://launchpadlibrarian.net/20709025/.hugin
--
hugin error 1
https://bugs.launchpad.net/bugs/310733
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
I think that I did not installed hugin from backports on Intrepid :
version 0.7.0~svn3191+beta5~1ubuntu1 for the 3 packages
Your ppa repository does not appear in my Synaptic and backports are not
activated.
Should I change something ?
--
hugin error 1
https://bugs.launchpad.net/bugs/310733
Public bug reported:
Hugin 0.7.0 on Hardy up to date
I upgraded Hugin 1 month ago as a request for testing a bug correction :
https://bugs.launchpad.net/bugs/223239
As written in this bug, it worked perfectly and I could create some panos. But
now, it's impossible, I always get an Error 1 :
Hardy up to date, brasero 0.7.? but I just downloaded Brasero 0.8.3 from
GetDeb and will test it next time I have a CD to engrave. It may take
some time !
--
system freeze
https://bugs.launchpad.net/bugs/223198
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Yes, I finally succeeded in running a memory test instead of starting Ubuntu !
No, I got no error during a full and a half test (2 hours ...).
For me, the problem is mainly due to Brasero, as I never get this system
freeze now when running Ubuntu. It now occurs only with Brasero (that I
avoid
Oups, I didn't take care of this when I looked at the error ... I
should have seen it. It's not a character that I often use in path and I
don't remeber of such an error in previous Hugin version (but we did not
have so much information). Anyway, Hugin works correctly and I will
change my
Hello Fabrice,
For what concerns this bug, it seems corrected ;-))
-add 2 images + assembly : OK
-delete images, add others + assembly : OK
-same thing + save .pto : OK
-delete images, add others + assembly : OK
-open saved .pto + assembly : OK
no more crash !
For what concerns Hugin by
** Attachment added: my notes concerning Hugin
http://launchpadlibrarian.net/19855066/Hugin_notes.txt
--
hugin exits when changing photos
https://bugs.launchpad.net/bugs/223239
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
It doesn't work as I am under Hardy :
if I put Hardy for the source list, Hugin is not marked as updatable
if I put Intrepid, Hugin can be updated but it can not be done as errors for
dependancies occur.
--
hugin exits when changing photos
https://bugs.launchpad.net/bugs/223239
You received
Hello,
I don't know how to proceed ...
If I go to your repository and try to install hugin = error,
hugin-tools needed
when installing hugin-tools = error, hugin-data needed
and no hugin-data in your repository.
Hugin is currently installed as 0.7 beta 4 on Hardy.
Must I proceed through
Currently, all the freezes occur whith Brasero, and it seems systematic if I
move the mouse too quickly, or look at Nautilus. When I start a CD burning, I
now let the PC alone ...
On normal use, no freeze : firefox, thunderbird, OOo, Hugin, Gimp, ...
I will start a memory test some day ;-) and
Same message for me.
I have a correct video during Ubuntu Intrepid loading from LiveCD, but after a
while, I get this message. I suppose that it happens when the session is
started and video is changed.
On Gutsy and Hardy, I had another problem occuring at the same moment
In /etc/X11, I got 2 xorg.conf files, after having done ctlaltF1 when I got
the message :
1°) xorg.conf.20081101221843 : 0 byte ???
2°) xorg.conf as in attached file, but no real information, at least for me :
only some configured monitor and so on ...
** Attachment added: xorg.conf
Some other infos :
- with Nautilus, copy a full cd to disk. It starts normally, then all the
system freezes (probably on a mouse move) : mouse or keyboard inactive but copy
continues. When the CD drive is inactive, reset restart ubuntu : all the copy
has been done. (repeated twice)
- with
Same thing in report, even with last day updates. In report, it gives a
small red arrow because the error text is too big to be contained in the
field. I enlarged the field to read the error : LibFormula error (error
code 505)
--
open office, sun report builder, Mod() function problem
Oups, sorry, I have now 2.10.8-0ubuntu1 ! I don't know where I found the
-1 extension ... gthumb says gThumb 2.10.8
--
gthumb segfaults when deleting a photo in full screen mode
https://bugs.launchpad.net/bugs/223034
You received this bug notification because you are a member of Ubuntu
Bugs,
Thank you Tormod for the information.
I just updated to gtumb 2.10.8-1 from ubuntu backports ... and it works
well !
I tested it by deleting some photos from my temp directory in full
screen mode : no problem !
Many thanks to the developpers and yourself
Denis
--
gthumb segfaults when
Quite the same error, and I repeated it on different folder :
- I have a folder named 2008 le Peuil
- I have want to change l to L : refused an folder with name ... already
exists
- I change name to 2008 Le Peuilxxx : OK
- I change then to 2008 Le Peuil, as I wanted previously : OK
Nautilus as
Many freezes later :
- most of the freezes come with file management :
* Nautilus + Brasero : at the end of cd burning, brasero ejects the cd, you
have to introduce it for a check. Nautilus then opens a new window to display
cd contents. Brasero begins the check and all ends with a freeze.
Maybe related to this bug or not : sometimes, Hugin exits when starting
the assembly, just after having clicked on button.
As an addon to the first post, Hugin accepts to remove a photo and add a
new one if no connection point has previously been defined. It seems to
exit only if you remove a
1°) Hardy is uptodate (RC + all updates up to 2 hours ago: but nothing since
some days)
2°) Nothing in /var/crash
3°) From Terminal :
[EMAIL PROTECTED]:~$ hugin
Panorama obj created
Could not load pano13Optimizing Variables
Strategy 1
Average (rms) distance between Controlpoints
after 0
Public bug reported:
Hardy, gthumb
In gthumb, open a photo from list, click on F11 (full screen mode) then click
on Del key. You are requested a confirmation, click on OK : gthumb window
immediately closes ...
You can then open gthumb again ... the photo has been deleted ...
This does not
Public bug reported:
Hardy, Synaptic
It is not possible to select copy a package name / number / comment
from the list, and so, we have to write down information and then
rewrite it.
This is not a bug, but it's not very fun to do, for example, when
reporting a bug, or giving a package name as
Public bug reported:
Hardy RC, fresh installation + updates.
Problem occurs from time to time, probably with Nautilus, but not sure
for some of the freezes.
Display seems locked but it's probably more a problem with inputs than anything
else :
- no key actions is taken into account,
- no mouse
Public bug reported:
Hardy RC + updates,
Hugin correctly assembles 2 photos or more. Then I want to assemble
other photos in Images tab. I delete previous images, then in this tab
(or in Assistant : same behaviour), I click on Add image. I can select
images in popup. When I click OK, Hugin
Public bug reported:
Hardy RC, Open Office 2.4 (with or without 04/22/2008 synaptic updates),
Sun Report Builder 1.0.2 from Synaptic (not from OOo)
All that works correctly on my pc, except the Mod() function that sends an
error on report result :
LibFormula error (error code 505)
The report
** Attachment added: DataBase reports
http://launchpadlibrarian.net/13834826/CdV_demo.odb
--
open office, sun report builder, Mod() function problem
https://bugs.launchpad.net/bugs/220919
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
It's now OK with SRB from Synaptic.
But the problem still exists for people who just install this extension
from OOo site. Nothing alerts them that this particular extension will
not work ... As Ubuntu refuses to work with standard extension, Ubuntu
should prevent people from loading them !
--
Public bug reported:
Hardy RC, OOo from Synaptic, Sun Report Builder (SRB) 1.0.2 from OOo
extensions
Fresh install Hardy RC :
1°) Base is not installed and OOo can not find / recognize Sun JRE 6 previously
installed
= in Synaptic, install main OpenOffice package, this brings Base + ~10
I will look at SRB in Synaptic this evening. For point 1 2, do I need
to file a bug ?
--
OOo :Sun Report Builder won't launch
https://bugs.launchpad.net/bugs/220148
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Hardy Beta again , but installed on PC :
After having tested Hardy Beta on LiveUSB (see previous post), I
installed it on my home PC. This of course required to perform the steps
as described in previous post to have a liveUSB session with a correct
display. But then, I started installation that
Hardy : not OK on Beta, but ...
As soon as Hardy Beta appeared, I downloaded it and gave it a try on my PC :
- boot on liveusb : crazy video as usual when session starts
- ctl alt F1, stop gdm, xorg.conf modif, start gdm : fail, try to remove lock :
no lock, start gdm again : ok and then correct
I downloaded alpha5 CD and tested it on my pc : same thing as usual, display
doesn't work when booting on cd. On another PC, it's OK. It is frustrating as I
had no problem on Feisty. I dropped Gutsy because I didn't succeed in having 3D
working, after having difficulties to get a proper video.
I just tested Hardy alpha 3 cd (and live usb), but it does not work : as soon
as session is started, the screen is no more readible (as in first screen shot
above), and the mouse is still correct and can be moved. For Gutsy I already
filled a bug (that I can't find now ??) that has been linked
Operations :
- boot on live usb hardy alpha 3
- messy screen when session starts
- ctl (?) alt F1 = console session
- look at xorg.conf : not a classic one ???
- can not see where to put agpmode !
Normally, the LiveCD is supposed to boot correctly by itself ;-) Users
should not have to modify
*** This bug is a duplicate of bug 133192 ***
https://bugs.launchpad.net/bugs/133192
Why didn't you mention the normal cursor before? :) : I think I were
more upset by the 99,9% of my desktop scrambling through the screen than
pleased by the tiny cursor arrow moving accordingly with my hand
I finally succeeded prforming all that ;-)
1°) Boot in single mode, add Option DRI off and start : OK ! Gutsy
boots normally, video is OK. Just a problem when session is started, a
popup opens internal error : failed to initialize HAL. Another problem
occurs when clicking on exit icon : the
Strange things happen in Gutsy world ... ;-)
All the following operations have been done using Gutsy Install LiveCd :
- boot on cd = bad video as usual when session opens.
- ctl-alt-F1 : standard video in 640*480 mode
- sudo -s -H to stay in sudo mode (otherwise, most operations are refused ...
No radeon more in log than in the other : 3. This is surpring as the
xorg.conf defines an ati driver ...
I can no more go back to my partimage with messy video and perform any
other test ... Sorry for that. But I can still boot on Gutsy CD (and get
a messy video) : if you have any action that
Still on Gutsy
I did what you requested and Gutsy booted normally but in low res
(800*600) :
- Boot on Gutsy with vesa driver, 1280*1024 : OK
- upgrade driver to 6.7.195 version,
- run dpkg-reconfigure -phigh xserver-xorg
- in xorg, add BusType PCI remove H V sync
- reboot pray ...
** Attachment added: xorg.conf after reboot, Gutsy working in low res
http://launchpadlibrarian.net/10729343/xorg.conf
--
upgrade feisty gutsy ati radeon 9200 problem
https://bugs.launchpad.net/bugs/164972
You received this bug notification because you are a member of Ubuntu
Bugs, which is
** Attachment added: log after reboot, Gutsy working in low res
http://launchpadlibrarian.net/10729359/Xorg.0.log
--
upgrade feisty gutsy ati radeon 9200 problem
https://bugs.launchpad.net/bugs/164972
You received this bug notification because you are a member of Ubuntu
Bugs, which is the
Back on Gutsy ;-) ...
Started again from the beginning : my Gutsy partimage, with messy video, just
from Feisty upgrade.
Before booting on this Gutsy :
- saved the xorg.conf as ... initial
- modified xorg.conf to add BusType PCI, and remove 2 lines for HorizSync
VertRefresh
Boot on Gutsy :
** Attachment added: Current Xorg log, gutsy running
http://launchpadlibrarian.net/10710923/Xorg.0.log
--
upgrade feisty gutsy ati radeon 9200 problem
https://bugs.launchpad.net/bugs/164972
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact
Back on Feisty ...
I reinstalled the Gutsy that was supposed to be OK, but that doesn't
function anymore : another problem with H sync on video ??? May be that
some Gutsy upgrades proposed by ubuntu that have been applied have
modified something, or maybe that my personnal settings (files .*)
Hi Tormod,
Not an easy task ;-) :
Back on Gutsy with previous partimage
Boot in normal mode : crazy video = reset
Boot in recovery mode : save xorg.conf /var/log/Xorg.0.log as ..._G0 in
other partition
move xorg.conf as ...Gutsy
Boot in normal mode :
** Attachment added: xorg.conf as set by Gutsy upgrade
http://launchpadlibrarian.net/10680773/xorg.conf_G0
--
upgrade feisty gutsy ati radeon 9200 problem
https://bugs.launchpad.net/bugs/164972
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug
** Attachment added: xorg log from Gutsy with xorg.conf
http://launchpadlibrarian.net/10680778/Xorg.0.log_G0
--
upgrade feisty gutsy ati radeon 9200 problem
https://bugs.launchpad.net/bugs/164972
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug
** Attachment added: xorg log from Gutsy WITHOUT xorg.conf
http://launchpadlibrarian.net/10680780/Xorg.0.log_G1
--
upgrade feisty gutsy ati radeon 9200 problem
https://bugs.launchpad.net/bugs/164972
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug
Another comment :
I think that on Feisty, I never installed the ATI driver, as the normal
driver was correctly working, including with 3D effects and Compiz (that I
don't use anymore).
--
upgrade feisty gutsy ati radeon 9200 problem
https://bugs.launchpad.net/bugs/164972
You received this bug
On Gutsy now :-))
It was not without problems and tests :
- Back on Gutsy with partimage . I put BusType PCI in xorg.conf as you
required.
- Boot on Gutsy : I got a popup saying Ubuntu on low resolution mode. There I
tried to configure what I could (card, screen) : but no success, so I
Bad idea !
I ran sudo dpkg-reconfigure -phigh xserver-xorg and added the PCI
option as before, then i rebooted ... and got the ubuntu in low res
message, and I am now in 800*600 res !
I join the xorg.conf after dpkg-reconfigure, rhe xorg.conf and the log
after reboot.
As I made a partimage when
** Attachment added: xorf.conf after reboot
http://launchpadlibrarian.net/10684980/xorg.conf
--
upgrade feisty gutsy ati radeon 9200 problem
https://bugs.launchpad.net/bugs/164972
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
** Attachment added: xorg log after reboot
http://launchpadlibrarian.net/10684989/Xorg.0.log
--
upgrade feisty gutsy ati radeon 9200 problem
https://bugs.launchpad.net/bugs/164972
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
** Summary changed:
- upgrade feisty gutsy ati radeaon 9200 problem
+ upgrade feisty gutsy ati radeon 9200 problem
--
upgrade feisty gutsy ati radeon 9200 problem
https://bugs.launchpad.net/bugs/164972
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug
Public bug reported:
My PC works perfectly with Feisty and win XP. I started a graphical upgrade to
Gutsy that was performed in 3h without problem. At reboot, grub was OK and so
was the (splash ?) screen while Ubuntu starts (with the progress bar). Then my
session started ... and the screen
88 matches
Mail list logo
