Yes, problem is still present in Kubuntu 21.10.
$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description:Ubuntu 21.10
Release:21.10
Codename: impish
** Changed in: lsb (Ubuntu)
Status: Incomplete => Confirmed
--
You received this bug
and see I guess.
Regards,
Graeme.
On Tue, Jul 20, 2021 at 11:05 AM Daniel van Vugt <1936...@bugs.launchpad.net>
wrote:
> The first thing we need to do is check to see if this is a Xorg-specific
> bug. Please try logging out (or rebooting) and select 'Ubuntu on
> Wayland' on the login
.
Thanks again,
Graeme
On Tue, Jul 20, 2021 at 11:05 AM Daniel van Vugt <1936...@bugs.launchpad.net>
wrote:
> The first thing we need to do is check to see if this is a Xorg-specific
> bug. Please try logging out (or rebooting) and select 'Ubuntu on
> Wayland' on the login screen (butto
Thank you so much for your prompt reply; unfortunately it leaves me no
further ahead.
To clarify I run my system on solar power - battery/inverter, it's much
cleaner than the grid around here, and cheaper.
The computer is left turned on all the time but the monitors (2) are turned
off to save
Public bug reported:
HP Pavillion desktop 2015 ufei date. Never turned off because boot takes too
long.
Screens (2) turned off system left on when not in use.
Up to Ubuntu 19 and early versions of 20 both screens came back on.
With latest update HDMI does not restart.
If boot from power off both
** Also affects: nfs-utils (Debian)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1907141
Title:
blkmapd: open pipe file /run/rpc_pipefs/nfs/blocklayout
I appear to be seeing these same symptoms in an up to date Debian
Buster, can you confirm which calibre version No this fix was made in.
$ uname -srv
Linux 4.19.0-14-amd64 #1 SMP Debian 4.19.171-2 (2021-01-30)
$ calibre --version
calibre (calibre 3.39.1)
--
You received this bug notification
Bug exists in 20.10 too, I just triggered it. It happened after screen
lock/unlock cycle.
Like other restart got rid of it.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1824874
Title:
> Hoping to save the next poor soul some grief :)
Thank you!
Yes, scanimage -T should certainly display the response from the scanner
by default.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
The same happened for me, with the same addition to
.config/kglobalshortcutsrc.
I ran Global Shortcuts in System Settings and saw there were no settings
for KRunner. I attempted to set the default global shortcut (which
remained as Alt+Space) and got the popup message:
"The shortcut 'Alt+Space'
Already fixed in commit 86b6bff627e2e9ddcb2ebc3998d5771a5d583ef6
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1876336
Title:
Whisker Menu renames its title after reboot
To manage notifications
Fixed on my ThinkPad T590 with the 5.3.0-17.18 kernel. Thanks.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1845454
Title:
Kernel panic in tpm_ functions when booting kernel 5.3 in Ubuntu 19.10
Public bug reported:
ubuntu or lubuntu will not install from iso at files install. Error5
input/output error
ProblemType: Bug
DistroRelease: Ubuntu 18.04
Package: ubiquity 18.04.14
ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17
Uname: Linux 4.15.0-20-generic x86_64
ApportVersion:
I haven't seen the problem for a while, maybe two years. I use POP3
only, not IMAP. I run Kubuntu; currently I'm on 19.04.
Sometimes kmail crashes, and I wonder if the way I clean up is related
to my not seeing duplicate filtered messages. When kmail crashes, I stop
akonadi ("akonadictl stop")
Apologies.
akonadictl start
akonadictl fsck
is the correct order.
--
You received this bug notification because you are a member of Kubuntu
Bugs, which is subscribed to kdepim in Ubuntu.
https://bugs.launchpad.net/bugs/883459
Title:
KMail duplicates emails
To manage notifications about
Public bug reported:
During install from 16.04 iso disc the install stops and says that
bootloader cannot find sda. The computer had previously run ok on 17.10
as only os after successful iso install. The computer and iso's are 32
bit.
** Affects: debian-installer (Ubuntu)
Importance:
This seems to be a duplicate of bug 521025.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1706859
Title:
Auto-selected keyboard layout no longer matches chosen region on
"Where are you" page
To
Problem doesn't occur in recent releases.
** Changed in: digikam (Ubuntu)
Status: Confirmed => Invalid
** Changed in: kde4libs (Ubuntu)
Status: Confirmed => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
I fixed this bug in version 2.1.6 (git commit
a73783d34fb09ba89df96c7c5b1e5d63fb3949b3).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1738675
Title:
Deleting every search action in the whisker
I suspected it was faulty - thanks for the confirmation.
TTFN.,
Graeme
Sent from Android phone.
On Wed, 9 May 2018, 08:58 Phillip Susi, <ps...@ubuntu.com> wrote:
> Your hard disk has failed and will need to be replaced.
>
>
> ** Changed in: ubiquity (Ubuntu)
>S
I can recreate this with many plugins on the top panel, not just Whisker
Menu. Just mousing back and forth across the very top edge of the panel
button eventually causes this with the pulse audio plugin and the
notifications plugin.
--
You received this bug notification because you are a member
** Information type changed from Private to Private Security
** Information type changed from Private Security to Public
** Information type changed from Public to Private
** Attachment removed: "JournalErrors.txt"
Public bug reported:
(Xubuntu 17.10 installer notified of a failure and said to report it ...
so here it is!)
Laptop - Toshiba Portege R700 (Model PT310A-05N011) with 4GB RAM and
320GB HDD.
ProblemType: Bug
DistroRelease: Ubuntu 17.10
Package: ubiquity 17.10.10
ProcVersionSignature: Ubuntu
** Also affects: gnome-session
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1582496
Title:
GLib-GObject-CRITICAL failures during Ubuntu 16.04 bootup
To
I have just been recovering a system that failed to upgrade from 14.04
to 16.04 with the same error as the OP. The solution was to chroot in
from a liveCD following the Update Failure instructions.
After an apt-get update, apt-get upgrade, apt-get dist-upgrade and apt-
get -f install the system
Solved for me on Xenial. nvidia-304 upgraded to
304.134-0ubuntu0.16.04.1.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1639180
Title:
no login possible after update to nvidia 304.132
To manage
Fixed for Yubico devices in Xenial. See bug #1387908.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1499783
Title:
Add udev rules for others U2F tokens
To manage notifications about this bug go
The fix in comment #18 is missing Feitian ePass FIDO and JaCarta U2F.
See https://github.com/Yubico/libu2f-host/blob/master/70-u2f.rules.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1387908
Title:
I'm using UEFI. I've found that Rod Smith (of rodsbooks.com fame) has
written some typically detailed reports about this problem in bug
#1571354 and bug #1567534.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
After installing 16.04 without third-party drivers and with Secure Boot
still enabled, I clicked on Additional Drivers in Software & Updates
settings, and selected the one available driver, microcode firmware for
Intel CPUs. After rebooting, the setting still shows "1 proprietary
driver in use".
Why is it the case that "installing third-party drivers requires turning
off Secure Boot"?
Is there a technical reason, or is it purely a policy decision (there's
no chain of trust, so Ubuntu isn't going to take responsibility for
security)? It's not explained either in the "Learn more..." popup
** Attachment added: "Penultimate screen before installation. "3 partitions
will be deleted" it says, referring to /dev/sdc. No mention of /dev/sda."
https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/704763/+attachment/4615733/+files/install.jpg
--
You received this bug notification
Problem is still there in 16.04 LTS (pre-release).
In my case I have a laptop with one internal disk and I'm installing on
an external USB-attached disk (/dev/sda and /dev/sdc respectively).
The result makes no sense to me. If I boot the laptop without the
external disk, I end up at a Grub
** Attachment added: "Final warning screen, showing which partitions will be
changed. Again, no mention of /dev/sda."
https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/704763/+attachment/4615734/+files/write.jpg
** Tags added: xenial
--
You received this bug notification because you
I too see the syslog messages listed in the bug description, but I'm not
sure how relevant they are.
To get an exact comparison, I did a live boot of 15.10 on a Samsung N150
and a Lenovo G50. On both machines I see the messages. On the N150,
Bluetooth comes up fine. On the G50, Bluetooth is
For me it does not work in Kdevelop and, most irritating of all, the
file picker.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1451564
Title:
Single-click not working
To manage notifications
Got the same problem.
Was running DVD Styler 2.5.2 happily under Ubuntu 13
Updated some months back to Ubuntu 14.04 and now DVD Styler closes as soon as I
attempt to burn. Tried the silence.ac3 file in Menu 1 with the same failure as
above
--
You received this bug notification because you are
1. Yes, if /lib/systemd/system-sleep/ doesn't exist, create it with mkdir.
2. Yes.
3. No, unless for some reason you want to limit the script to suspend only, or
something. Here's my script:
#!/bin/sh
case $1/$2 in
pre/*)
;;
post/*)
hdparm -B 254 -S 120 /dev/sdb
;;
esac
4. Yes,
See also
https://bugs.launchpad.net/ubuntu/+source/hdparm/+bug/199094/comments/29
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1511703
Title:
Standby timeout setting ignored after system
Public bug reported:
If a standby timeout setting is applied in Drive Settings, this works
fine at first when the setting is made, and after the system is
rebooted. However, if the system is suspended and resumed, the timeout
setting is ignored and the disk continues to spin.
Using Ubuntu 15.10,
I've given up on hdparm.conf now. As noted in #27, it seems that systemd
and udev/udisks2 is the way to go, but it's not clear how exactly.
Here's what I've done. This bug report isn't the ideal place to document
it, but I can't find a better place for now. Maybe it'll help someone
who finds it
I've given up on hdparm.conf now. As noted in #27, it seems that systemd
and udev/udisks2 is the way to go, but it's not clear how exactly.
Here's what I've done. This bug report isn't the ideal place to document
it, but I can't find a better place for now. Maybe it'll help someone
who finds it
See also
https://bugs.launchpad.net/ubuntu/+source/hdparm/+bug/199094/comments/29
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1225169
Title:
Spindown setting not applied on resume from sleep
To
Reported in https://bugs.freedesktop.org/show_bug.cgi?id=92746
** Bug watch added: freedesktop.org Bugzilla #92746
https://bugs.freedesktop.org/show_bug.cgi?id=92746
** Also affects: udisks via
https://bugs.freedesktop.org/show_bug.cgi?id=92746
Importance: Unknown
Status: Unknown
Public bug reported:
If I issue "udisksctl dump" and then issue "udisksctl info" for one of
the objects in the dump, I get an error message. For instance:
$ udisksctl info --object-path
/org/freedesktop/UDisks2/drives/TSSTcorp_CDDVDW_SH_S223Q_TSSTcorp_CDDVDW_SH_S223Q
(udisksctl info:4995):
See also
https://bugs.launchpad.net/ubuntu/+source/udisks2/+bug/1281588/comments/11
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1507003
Title:
Too fast "housekeeping" prevents harddrive from
*** Bug 12275 has been marked as a duplicate of this bug. ***
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1397095
Title:
dragging applications in the task bar causes repaint errors
To manage
I'm experiencing this in 15.04. With the change to systemd, the pm-utils
scripts are no longer run when the system resumes after suspend.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/199094
Title:
I'm experiencing this in 15.04. With the change to systemd, the pm-utils
scripts are no longer run when the system resumes after suspend.
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to pm-utils in Ubuntu.
Also:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=725284
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=779412
** Bug watch added: Debian Bug tracker #725284
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=725284
** Bug watch added: Debian Bug tracker #779412
Also:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=725284
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=779412
** Bug watch added: Debian Bug tracker #725284
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=725284
** Bug watch added: Debian Bug tracker #779412
Note this is still present in Vivid, and likely will be present in all
future releases until it is specifically addressed.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1395106
Title:
Unity fails
It's best to put error messages in text form for easy reference.
The title of the popup message is "Fehler beim Löschen von doppelten
Nachrichten – Kontact", which Google translates as "Failed to delete
duplicate messages".
The content of the message is "Unable to fetch item from backend
Public bug reported:
In 2.14 and 2.17, wajig doc at line 280 says:
To list a one line dscription
** Affects: wajig (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Just retested on a fresh install of 15.04 x64 with the nvidia-346
drivers, problem still exists. In between the two nvidia-smi runs shown,
I just switched to the text console with ctl-alt-f1, and then switched
back to X.
graeme@galvatron:~⟫ nvidia-smi
Tue Aug 11 15:48:00 2015
Public bug reported:
Wajig 2.17.
Here I enter q in less:
$ wajig sizes|less
Traceback (most recent call last):
File /usr/share/wajig/wajig.py, line 1087, in module
main()
File /usr/share/wajig/wajig.py, line 1083, in main
result.func(result)
File /usr/share/wajig/commands.py, line
Well, all other web access succeeds, and if the software can't work
properly with a web proxy, I'd definitely consider that a bug.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1458989
Title:
Huh, I'm seeing the same behaviour as you now:
nergdron@c1:~⟫ ls -l /lib/systemd/system/samba.service
lrwxrwxrwx 1 root root 9 Apr 3 14:32 /lib/systemd/system/samba.service -
/dev/null
nergdron@c1:~⟫ sydi 0u^C
130 nergdron@c1:~⟫ sudo -i
[sudo] password for nergdron:
root@c1:~# systemctl start
Huh, I'm seeing the same behaviour as you now:
nergdron@c1:~⟫ ls -l /lib/systemd/system/samba.service
lrwxrwxrwx 1 root root 9 Apr 3 14:32 /lib/systemd/system/samba.service -
/dev/null
nergdron@c1:~⟫ sydi 0u^C
130 nergdron@c1:~⟫ sudo -i
[sudo] password for nergdron:
root@c1:~# systemctl start
Can't find any systemd specific init scripts for samba, either:
root@c1:/etc/systemd# find . | grep samba
root@c1:/etc/systemd# find . | grep smb
root@c1:/etc/systemd# find . | grep nmb
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to
Public bug reported:
After upgrading to 15.04 from 14.10, Samba no longer starts at boot. I
suspect it's related to the switch to systemd, as attempting to set it
to start using the systemd tools results in a bunch of error messages:
root@c1:~# systemctl enable samba
Synchronizing state for
Public bug reported:
After upgrading to 15.04 from 14.10, Samba no longer starts at boot. I
suspect it's related to the switch to systemd, as attempting to set it
to start using the systemd tools results in a bunch of error messages:
root@c1:~# systemctl enable samba
Synchronizing state for
Can't find any systemd specific init scripts for samba, either:
root@c1:/etc/systemd# find . | grep samba
root@c1:/etc/systemd# find . | grep smb
root@c1:/etc/systemd# find . | grep nmb
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
When running lxd-images with the suggested command in its help text, it
fails to retrieve the GPG key and then fails to retrieve the image:
graeme@galvatron:~⟫ lxd-images
error: the following arguments are required: action
usage: lxd-images [-h] {import} ...
LXD: image
Public bug reported:
After upgrading to 15.04, bumblebee's optirun fails to work correctly:
$ optirun --verbose glxgears
[10626.593169] [INFO]Response: No - error: Could not load GPU driver
[10626.593198] [ERROR]Cannot access secondary GPU - error: Could not
load GPU driver
[10626.593218]
This seems to be only a problem with Intel's open source video drivers.
When I use nvidia-prime to switch to the nvidia binary drivers, the
program runs correctly.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
pcsxr doesn't seem to work properly on 15.04, it just crashes on any
ISO:
$ ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
RGB mode found. id: 18424752, depth: 24
The program 'pcsx' received an X Window System error.
This probably reflects a bug in the
It fails for me in Kubuntu 14.10 Utopic, but the latest version in
Universe is 2014.08.05-1.
$ wajig detail youtube-dl
Package: youtube-dl
State: installed
Automatically installed: no
Version: 2014.08.05-1
Priority: extra
Section: universe/web
Maintainer: Ubuntu Developers
*** This bug is a duplicate of bug 953875 ***
https://bugs.launchpad.net/bugs/953875
I don't believe this is a duplicate of
https://bugs.launchpad.net/bugs/953875.
My install is clean ubuntu 15.04 MATE. No Encryption
I get this issue sportadically with my Home drive on a separate
partition,
Public bug reported:
Having problems fetching files using the version of python-requests in
14.04. It works fine in 14.10 and more recent releases, so it appears to
be a bug in the older version of python-requests that 14.04 has. This
affects things like salt-stack, which leverage python-requests
Public bug reported:
Having problems fetching files using the version of python-requests in
14.04. It works fine in 14.10 and more recent releases, so it appears to
be a bug in the older version of python-requests that 14.04 has. This
affects things like salt-stack, which leverage python-requests
Hi,
I have this same problem, can anyone help please?
Im running an ATI Radeon Cedar HD5450 graphics card and using the open
source driver, I've tried a fresh install of Unity.
The freeze mainly happens when I'm using Video, so I figured it would
probably be something to do with the Graphics
If you do not run a program that waits for user input, it will not stay
open. It is working exactly as intended (and exactly the same as the
application finder).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
sourceware bug: https://sourceware.org/bugzilla/show_bug.cgi?id=12926
results in calls to getaddrinfo() spinning forever
This bug has been fixed in glibc master and included in 2.21 packages,
would it be possible to include a backport in the Trusty stable line
(e.g.
I wonder if this is a shaw mirror issue, since I'm definitely getting
that version on utopic from their mirror:
⟫ apt-cache showpkg awscli
Package: awscli
Versions:
1.2.9-2
(/var/lib/apt/lists/ubuntu.arcticnetwork.ca_dists_utopic_universe_binary-amd64_Packages)
Description Language:
⟫ apt-cache policy awscli
awscli:
Installed: (none)
Candidate: 1.2.9-2
Version table:
1.2.9-2 0
500 http://ubuntu.arcticnetwork.ca/ utopic/universe amd64 Packages
So that looks fine.
Added in ca.archive.ubuntu.com, and yeah:
395 upgraded, 19 newly installed, 2 to remove and 0
I wonder if this is a shaw mirror issue, since I'm definitely getting
that version on utopic from their mirror:
⟫ apt-cache showpkg awscli
Package: awscli
Versions:
1.2.9-2
(/var/lib/apt/lists/ubuntu.arcticnetwork.ca_dists_utopic_universe_binary-amd64_Packages)
Description Language:
⟫ apt-cache policy awscli
awscli:
Installed: (none)
Candidate: 1.2.9-2
Version table:
1.2.9-2 0
500 http://ubuntu.arcticnetwork.ca/ utopic/universe amd64 Packages
So that looks fine.
Added in ca.archive.ubuntu.com, and yeah:
395 upgraded, 19 newly installed, 2 to remove and 0
I'm seeing this reappear on utopic with awscli (1.2.9-2):
⟫ aws configure
Traceback (most recent call last):
File /usr/bin/aws, line 23, in module
sys.exit(main())
File /usr/bin/aws, line 19, in main
return awscli.clidriver.main()
File /usr/share/awscli/awscli/clidriver.py, line 44,
*** Bug 11573 has been marked as a duplicate of this bug. ***
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1397095
Title:
dragging applications in the task bar causes repaint errors
To manage
Fixed in 225218a.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1422719
Title:
wrapper-1.0 crashed with SIGSEGV in gtk_alignment_set()
To manage notifications about this bug go to:
Fixed in 05ae5eb.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1388575
Title:
I18N - whiskermenu shouldn't handle Enter key press event when user
commits string from input method
To manage
Public bug reported:
I expected: to be able to adjust alternatives.
What happened: no effect for any operations.
In several places within the file main.py (i.e. for all actual actions), the
code executes update-alternatives using the path:
/usr/sbin/update-alternatives
If update-alternatives
I have not tried any other kernels and I am not sure which I was running
before the problem occurred, but I have realised that the problem is
intermittent - it happens on boot and the only solution is to reboot. As
I have not had the laptop long (a month) so I cannot confirm that the
problem
To clarify my previous comment, I am currently running kernel
3.16.0-29-generic and its working - but it may or may not work next time
I boot,
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1411180
Reverting to kernel 3.16.0-23-generic does fix it. WIll experiment with
other kernels and see what does and does not work.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1411180
Title:
ProcVersionSignature: Ubuntu 3.16.0-28.38-generic 3.16.7-ckt1
Uname: Linux 3.16.0-28-generic x86_64
ApportVersion: 2.14.7-0ubuntu8
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: graeme 2406 F pulseaudio
CurrentDesktop: KDE
Date: Thu Jan 15 15:32
has consumed
over a GB of VRAM:
graeme@galvatron:~⟫ sudo nvidia-smi
[sudo] password for graeme:
Fri Jan 9 11:58:06 2015
+--+
| NVIDIA-SMI 331.38 Driver Version: 331.38
Can't repro since the latest batch of updates either, so it may have
been an interaction with something else which has since been fixed. Good
to close.
** Changed in: vlc (Ubuntu)
Status: Incomplete = Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs,
Public bug reported:
'dirdiff' needs 'wish' installed for it to run, without it you get the
following error:
/usr/bin/dirdiff: 3: exec: wish: not found
'wish' is in the 'tk' package and installing it fixes the error,
'dirdiff' should depend on this.
** Affects: dirdiff (Ubuntu)
Public bug reported:
I've noticed recently that VLC seems to be only outputting mono audio
when the input audio file is stereo (mp3, aac, etc). Comparing the
output between VLC and Audacious on files with heavy stereo mixing makes
this problem very evident, VLC seems to be just downmixing the
Public bug reported:
Running ifup manually with my network configuration gives this error:
# ifup --verbose eth0
Configuring interface eth0=eth0 (inet6)
run-parts --exit-on-error --verbose /etc/network/if-pre-up.d
run-parts: executing /etc/network/if-pre-up.d/ethtool
run-parts: executing
Am I misunderstanding, or does this mean you guys intend to leave the
java plugin broken in Utopic?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1363785
Title:
package icedtea-netx:amd64
Public bug reported:
I've acquired a high-dpi display recently (ASUS PB287Q), and while the
monitor preferences to set GTK scaling works quite well, Unity makes no
attempt to similarly scale up the cursor, leaving me with a minuscule
cursor that is almost invisible.
As well, other tools such as
Also, forum comments like those suggested in the following don't seem to
work with 14.10 either:
http://askubuntu.com/questions/126491/how-do-i-change-the-cursor-and-
its-size
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
I've found on 14.10, if you enable the shortcut in CCSM and then disable
it, that effectively disables it. However, I've also found each distro
release re-enables this annoying shortcut, even if it's marked as
disabled.
This speaks to underlying issues in the Compiz keyboard shortcuts
system, or
Public bug reported:
After upgrading from 14.04 to 14.10, applets no longer work correctly in
Firefox. Looking at the icedtea-7-plugin package, it no longer installs
anything into the Firefox plugin directory:
$ dpkg -L icedtea-7-plugin
/.
/usr
/usr/lib
/usr/lib/jvm
Just updating this bug, since I'm running into it on my UX302LG. It
looks like it should be fixed in future kernel releases, so it'd be
useful to know if the patches mentioned here are actually in the next
Ubuntu release (14.10):
https://bugzilla.kernel.org/show_bug.cgi?id=70421
In the mean
Public bug reported:
When selecting disable while typing under the touchpad section of the
Mouse Touchpad preferences, nothing changes, the touchpad stays
active while typing. I can rapidly type multiple characters with my left
hand and continue to move the cursor with the touchpad with my right
With all debug output enabled in kdebugdialog and digikam running, when
I plug in my camera I get these messages:
digikam(2590)/digikam (core) Digikam::DigikamApp::checkSolidCamera:
fillSolidMenus: Found Camera Canon Inc. Canon Digital Camera protocols
(ptp) drivers (gphoto)
1 - 100 of 905 matches
Mail list logo
