Public bug reported:
do-release-upgrade fails with:
"
Änderungen werden berechnet
Änderungen werden berechnet
Es konnte nicht ermittelt werden, welche Systemaktualisierungen
verfügbar sind
Ein unlösbares Problem trat während der Berechnung der
Systemaktualisierung auf.
Wenn keine dieser
Thank You very much. Works.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/2060659
Title:
X11 fractional scaling support is missing in 46.0
To manage notifications about this bug go to:
Yes ibus is installed.
# dpkg --get-selections |grep ibus
gir1.2-ibus-1.0:amd64 install
ibusinstall
ibus-data install
ibus-gtk:amd64 install
** Description changed:
If I try to add the Keyboard Layout Plugin to Budgie Panel my session
crashes with an overlay of some sort that doesn't allow me to run
- 'budgie-panel --replace --reset'.
+ 'budgie-panel --replace --reset'. I think the overlay comes from
+ 'budgie-session-failed'.
Public bug reported:
If I try to add the Keyboard Layout Plugin to Budgie Panel my session
crashes with an overlay of some sort that doesn't allow me to run
'budgie-panel --replace --reset'.
If a plugin crashes then at least leave me with a desktop that I can try
to fix.
Well I guess I just
I can report that the packages 46.0-1ubuntu8 works like a charm, many
thanks! Downloaded the from here:
https://launchpad.net/ubuntu/+source/mutter
I did however had to use --force-overwrite on mutter-common since there
was a conflict with the file
That version is about 100 releases old, it's not my fault linux mint
refuses to ship a current inxi. File a bug report with linux mint where
it might do some good, not here, the ubuntu version in Jammy is current,
and hirsute and impish both have 3.3.0x inxi versions as well. Mint
failing to
Current inxi release is 3.3.13.
What is 'this' referring to? Never use the term 'this' when discussing
technical issues, it does not narrow it down enough to convey meaning.
Rather than ask if 'this is still an issue', why don't you test it and
see?
The bug reported here is 50 to 100 releases of
What is not working is hotplug of any device 5+ Gb/s on Apple computers
with Intel cpu, 2016+
At boot time, devices are recognized by efi firmware. After that, any
unplugged device is gone until again plugged in during boot
https://bugzilla.kernel.org/show_bug.cgi?id=211681
Hello Frank
hm, the output shows absolutely no relationship with AP bus or zcrypt device
driver code.
Neither the kernel callstack nor the userspace iucvserv application has any
relations to
my patch series.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which
Hi Nick,
ok then I will close this bug and hope the new server works well.
Bye
Harald
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1915501
Title:
init.d script fails to set socket ownership
Fixed by newer version of amavisd-milter package.
** Changed in: amavisd-milter (Ubuntu)
Status: In Progress => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1915501
Title:
Public bug reported:
Build ends with a crash
ProblemType: Package
DistroRelease: Ubuntu 20.04
Package: nvidia-340 340.108-0ubuntu5.20.04.2
ProcVersionSignature: Ubuntu 5.8.0-63.71~20.04.1-generic 5.8.18
Uname: Linux 5.8.0-63-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion:
I think here are more information:
https://gitlab.freedesktop.org/drm/intel/-/issues/2579
** Bug watch added: gitlab.freedesktop.org/drm/intel/-/issues #2579
https://gitlab.freedesktop.org/drm/intel/-/issues/2579
--
You received this bug notification because you are a member of Ubuntu
Bugs,
** Changed in: evolution-data-server (Ubuntu)
Assignee: Sebastien Bacher (seb128) => Harald Meier (supersluttommy)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1925742
Title:
Recent iCl
by
creating a bug report at https://launchpad.net/bionic-backports but mine wasn't
considered until now.
Again thanks for your report and your work I'm currently unsure what to do with
your bug report as I don't know how to best fix this issue in a LTS release.
Kind regards
Harald Jenny
** Changed
I noticed this error on Ubuntu 20.10. Local OpenLDAP, nslcd and a LDAP-
user's cron-jobs aren't run because the log says orphaned.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to the bug report.
https://bugs.launchpad.net/bugs/27520
Title:
Public bug reported:
I installed nslcd, libnss-ldapd, migration-tools, slapd, ldapscripts.
Using the migration-scripts I copied the users to LDAP. getent shadow
(as root) shows encrypted passwords and everything works as it should.
Lightdm however, doesn't. I'm unable to logon using Xephyr
Note that the option --tty also often takes care of these issues, that
was added before 3.0.32, though I'm not positive about which bug this
user has, but they can trivially verify by simply testing on current
inxi, if it goes away, the bug was fixed long ago.
--
You received this bug
This version of inxi is obsolete, inxi is on version 3.2.02 right now.
Bugs like this are only meaningful if the poster downloads current inxi
and reproduces them on current release. I believe the ssh -C bug was
fixed quite a while ago.
--
You received this bug notification because you are a
Unfortunately, I can no longer check that. I upgraded to Ubuntu 20.04.1
and the problem no longer exists.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1818403
Title:
cups-pdf ld.so: object
Tested 8.59+17.10.20170606-0ubuntu2.20.10.1 on groovy and the test
scenario outlined in the description is working now. The auth dialog no
longer crashes singond.
** Tags removed: verification-needed verification-needed-groovy
** Tags added: verification-done verification-done-groovy
--
You
Closed
** Changed in: amavisd-milter (Ubuntu)
Status: In Progress => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1725681
Title:
package amavisd-milter 1.5.0-5 failed to
Closing bug report due to bug's nature (seems it was an amavisd-new bug)
and no reply from bug reporter.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1725681
Title:
package amavisd-milter 1.5.0-5
Also uploaded to groovy and focal as
8.59+17.10.20170606-0ubuntu2.20.10.1 and
8.59+17.10.20170606-0ubuntu2.20.04.1 respectively
** Changed in: signon (Ubuntu Focal)
Status: Confirmed => In Progress
** Changed in: signon (Ubuntu Groovy)
Status: Confirmed => In Progress
--
You
I'm seeing the same problem with gnome-mines over SSH from 20.04 to
18.04.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/992464
Title:
Menu not accessible when run via ssh xforwarding
To manage
** Description changed:
- I'm reporting this bug upstream from where I found it, since I've
- learned that the signond package in KDE Neon is sourced from Ubuntu
- focal.
+ [Impact]
+
+ Without the patch users are unable to add google accounts because signond
crashes.
+ This prevents users from
Waiting for new Debian release
** Changed in: amavisd-milter (Ubuntu)
Status: Confirmed => In Progress
** Changed in: amavisd-milter (Ubuntu)
Assignee: (unassigned) => Harald Jenny (harald-a-little-linux-box)
--
You received this bug notification because you are a member of
Waiting for new Debian release
** Changed in: amavisd-milter (Ubuntu)
Status: Confirmed => In Progress
** Changed in: amavisd-milter (Ubuntu)
Assignee: (unassigned) => Harald Jenny (harald-a-little-linux-box)
--
You received this bug notification because you are a member of
Dear Kees van Iwaarden,
I don't know if your bug report is still valid could you confirm that
with a current version the problem persists?
Kind regards
Harald Jenny
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https
Look if problem is still an issue.
** Changed in: amavisd-milter (Ubuntu)
Status: New => In Progress
** Changed in: amavisd-milter (Ubuntu)
Assignee: (unassigned) => Harald Jenny (harald-a-little-linux-box)
--
You received this bug notification because you are a member of
Huh, so you can, thanks. Confirming that this works too, and agreed that
that looks like it should cover all cases.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1904195
Title:
apt cancels holds on
My understanding of pinning is that that can be used to specify which
version to use, which is what I use it for already, but not to force no
version to be used. Agreed that this is not a common use case, so low
prio and not patching it till it's fixed upstream makes sense, but since
it's
You're right btw that it's a dpkg bug, but it's a bit more subtle. The
cleanup that dpkg performs after installation is meant to preserve the
hold state for non-installed packages. This is handled by the
pkg_is_informative function, which classifies everything with "pkg->want
!= PKG_WANT_UNKNOWN"
Whether it's a bug in apt or in something used by apt doesn't really
make a difference from an end user perspective. Can this bug be reopened
as a dpkg bug, then, or should I report that as a new bug?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Public bug reported:
When a package is not installed and apt dist-upgrade offers to install
it, if this is not desired, it is possible to hold the package using
multiple tools, which puts it in a state documented in dpkg.1 as:
hold
A package marked to be on hold is kept on the
I hade this same problem. Apparently an on apparmor profile left behind
of an old mysql install. This fixed it for me;
echo "/usr/sbin/mysqld { }" > /etc/apparmor.d/usr.sbin.mysqld
apparmor_parser -v -R /etc/apparmor.d/usr.sbin.mysqld
systemctl restart mariadb
--
You received this
This apparently has been going on in ubuntu for longer than I realized,
I assume one of the fallback tests which used to work must now be
failing.
Added more filters for these types of changes, and re-ordered some of
the detection for gnome to avoid a case where it is gnome but it fails
the
this is a regression in the beta 20.10 gnome ubuntu desktop ID. It is
not possible to know if they will correct this regression or not.
the value $GDMSESSION should be 'gnome' but is 'ubuntu', that is
completely wrong, GDMSESSION is supposed to identify the gnome desktop,
not the distro name.
File an issue, as I already told you, on https://github.com/smxi/inxi
about the desktop issue.
This requires data and discussion, and launchpad is the wrong place for
that. I cannot reproduce your system, nor do I have any actual idea of
what you are doing to lead to desktop detection failure.
Please DO NOT tack on totally unrelated issues, the desktop has NOTHING
to do with the compiler. The compiler issue is fixed. If you have other
issues, file an issue on github inxi, the desktop logic is totally
unrelated, and can be quite complicated to debug, certainly not an
appropriate issue
https://www.kernel.org/doc/Documentation/rtc.txt
just a bit of info on rtc drivers. While rtc is something, it's not
necessarily the cmos battery, it's just a chip that the system can use
to determine time. So it would not be a cmos battery it would be an RTC
battery, since there would be no way
Then there is no data available, which means the issue is not valid, nor
is there anything indicating that that data is available. As an aside I
do not remember ever seeing CMOS battery state listed when testing or
checking inxi -Bx results or datasets, usually the Device-x: battery
states belong
As an aside, if you have a feature request, file it on
https://github.com/smxi/inxi otherwise it won't really make any
difference since I don't routinely follow distro issue trackers.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
This is not a valid issue, and it's not a bug. Also, the poster didn't
read the help/man at all, since to see other device batteries listed,
you have to use -Bx, not -B alone. -B alone only shows results for
laptop batteries, basically. If -Bx does not show the cmos battery, then
inxi can't find
for help,
Harald
** Affects: kontact (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1898517
Title:
kontact packages for data export / import
Public bug reported:
RUnning the 20.04 desktop zfs install, the boot partition is 500 MiB
I run 512 MiB without zfs because the default 234 MiB has been too small
for a long time, like two years
500 MiB is too little because snapshotting is taking place. boot cannot
hold even two kernels
macOS
This issue is resolved in the pinxi branch, and will be in next inxi,
3.1.07, whenever that comes out, probably soon.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1896071
Title:
inxi 3.1.06-1-1
This is caused by a syntax change in /proc/version
Since I had no /proc/version for ubuntu I had to guess, the issue was
resolved for the distros that I got to see samples from, but I have yet
to see a /proc/version output for ubuntu kernel 5.8.
Note this is NOT a bug in inxi because the syntax
*** This bug is a duplicate of bug 1871716 ***
https://bugs.launchpad.net/bugs/1871716
It still dies on me sometimes when I close a window.
[618245.509958] marco[611813]: segfault at 8000fc ip 7f91df0bd9d4 sp
7ffd2d419dc8 error 4 in libcairo.so.2.11600.0[7f91df06a000+cf000]
This is getting progressively worse. Every two close of a window crashes
the window-manager. So much so I had to create an icon for starting
marco, since it isn't re-starting itself anymore. And every time it
dies, all windows get shifted some tens of pixels downwards. It feels
like sweatpants
I can confirm THAT also:
root@Scotty:~# update-initramfs -u
update-initramfs: Generating /boot/initrd.img-5.4.0-29-generic
W: Possible missing firmware /lib/firmware/amdgpu/navi12_vcn.bin for module
amdgpu
W: Possible missing firmware /lib/firmware/amdgpu/arcturus_vcn.bin for module
amdgpu
W:
I can confirm that a clean install on a newly formatted device on a box
(which was affected by this problem) runs fine now.
The used box is an older intel i7-2600 CPU (8 cores) with an also older
Radeon R9 285/380.
The amdgpu module _is_ loaded as lsmod shows, but the installation
itself and the
Sorry, I meant Bug #1869053 of course.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1873325
Title:
update-initramfs complains of missing amdgpu firmware files
To manage notifications about this
With the new kernel 5.4.0.29 the missing modules are foubd obviusly, so
the Installer runs well and finishes normally. So, also Bug 1873325 was
fixed for me, just tested on the same HW with a fresh install.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
I also can confirm that the Installation works now on the same HW which
had the Error(s) before. As there are the amdgpu modules found now with
kernel 5.4.0.29, I firmly believe that the bug 1873325 was the
originator.
--
You received this bug notification because you are a member of Ubuntu
Verified also for LTS stable release.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1869053
Title:
Ubuntu 20.04 daily (25.03.2020) installer crashes
To manage notifications about this bug go to:
I'm also affected by ths bug. This may also be connected to bug #1869053
(https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1869053), which
happens on the same box during install.
Graphics card is an older Radeon R9.
Apport and lspci output is attached.
** Attachment added:
May be connected to
https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1873325
Please see my comment there.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1869053
Title:
Ubuntu 20.04
Public bug reported:
During fresh install, from USB medium, the installation crashed
ProblemType: Bug
DistroRelease: Ubuntu 20.04
Package: ubiquity 20.04.15
ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30
Uname: Linux 5.4.0-26-generic x86_64
NonfreeKernelModules: zfs zunicode zavl icp
Git commit f40191a147c9643717fda1cf9d1f42c526550893 by Harald Sitter.
Committed on 06/04/2020 at 09:27.
Pushed by sitter into branch 'master'.
smb: add hack to support spaces in workgroup names
Summary:
workgroup names are as best I can tell always still netbios names which
means they can
Sorry,
I couldn't find a package for fsckd that I was sure would be correct to name
this package.
This appears to be a service that consists of the following components:
"systemd-fsckd.service, systemd-fsckd.socket, systemd-fsckd - File system check
progress reporting"
--
You received this
Public bug reported:
I'm using Ubuntu 18.04.4 LTS, Kernel Linux 4.15.0-91-generic (x86_64), Version
# 92-Ubuntu SMP Fri Feb 28 11:09:48 UTC 2020.
My system is installed on an SSD.
My current session is interrupted once a week. A black screen appears with the
following message:
/dev/nvme0n1p2:
https://phabricator.kde.org/D27804
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/340106
Title:
Dolphin & Konqueror do not support browsing workgroups with spaces in
their name
To manage
Public bug reported:
Every now and then when I close a window marco dies. Luckily it gets
restarted very quickly so I don't get thrown out of my session, the
windows don't even have time to re-arrange themselves to one desktop.
[584024.122730] marco[1436295]: segfault at 4e00048 ip
I too had this problem in 18.04, and now in 20.04. I am unable to use
the headphones for conferencing.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1553669
Title:
Annoying "call from" message when
Thanks.
With that in mind we cannot really support spaces while also following
the smb URI format [1]. I suppose we'll just have to deviate a bit iff
the workgroup name contains a space by using a variant of the notation
that stuffs the workgroup into the userinfo `smb://work group;@/` and
then
CCing David Faure for some input
This is either a bug in QUrl or not a bug at all.
We do
```
QUrl u("smb://");
u.setHost(dirpName);
```
to which QUrl says
> Invalid hostname (contains invalid characters); source was \"FOO BAR\";
> scheme = \"smb\", host = \"\"
Hm, I just figured out that I missed the last really useful comment
because I did not get an e-mail about it.
Anyway, https://github.com/lxc/lxc/issues/3186 now explains in more
detail how to quickly build fuidshift from source.
Thank you, Stéphane!
** Bug watch added: LXC bug tracker #3186
Public bug reported:
I used equivs in the past to build meta packages to ensure that certain
packages are installed on my systems. This always worked well.
With the Ubuntu 19.10, I am unable to build any meta package with equivs
even though the program does not report any error. Running
Public bug reported:
currently translations go into language-pack-gnome-$lang-base. this
isn't particularly ideal since pwquality is also used by kde plasma's
user manager which then also drags in all unrelate gnome software
translations. pwquality is desktop independent and it'd be really grand
.
regards Harald Freudenberger
** Patch added:
"s390-zcrypt-Fix-wrong-dispatching-for-control-domain.ubuntu_bionic.patch"
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1832624/+attachment/5273391/+files/s390-zcrypt-Fix-wrong-dispatching-for-control-domain.ubuntu_bionic.patc
This is not a bug, the weather source that was in inxi 2.x and 3.0.31
and earlier is gone. The only fix for weather is to update to current
inxi (3.0.33 in ubuntu, and 3.0.34 in master branch of github inxi).
The reason later versions work is because they point to a new weather
data source.
--
Was there a question in there?
I did also see this on installed kubuntu systems, it's just far harder
to reproduce there because of the racy nature of the issue. In fact, the
only reason I know about the issue is because the colors are just so far
off that they tripped up our openqa tests and
04e8; 343d; Z52IBAIB600104R 'is a Samsung CLX-3180 series on
USB scanner
haraldbraun @ Fulda: ~ $ ls -al / dev / bus / usb / 001/005
crw-rw-r - + 1 root lp 189, 4 Mar 17 08:00 / dev / bus / usb / 001/005
haraldbraun @ Fulda: ~ $ groups
Harald Brown Lp Sudo Backup Lpadmin Scanner Saned Public
haraldbraun @ F
enough ffdc data
Thanks
This happens at ibmca destruction time.
Looks like there is some kind of double free or so in the
destructor for the ibmca engine. We had some issues like
this in the past already. I'll have a look onto the code ...
Thanks Frank and Xnox
regards Harald Freudenberger
Public bug reported:
I'am using:
-Ubuntu 18.04.2 LTS
-printer-driver-cups-pdf 3.0.1-5
-thunderbird 1:60.5.1+build2-0ubuntu0.18.04.1
No directory /usr/share/doc/cups-pdf
If I want to create a mail as Generic-Cups PDF-Printer under Thunderbird
60.5.1 (64-Bit), the error message "ld.so: object
uploaded bionic SRU libxcb_1.13-1.1 by Jonathan Riddell
** Description changed:
- I suspect this means there should be another package, libxcb-xinput-dev
- perhaps?
+ [Impact]
+ Allow Qt 5.12 to be compiled with full input support. This allows
applications to be built using complex input
Public bug reported:
At first this may not sound like much of a issue, but this tiny white
border actually makes it look like there's something wrong with the
Ubuntu dock/panel or like the screen is shifted 1 pixel to the right. If
the user has automatic wallpaper change enabled it may not be
Please see the attached corrected wallpaper.
** Attachment added: "Wall_with_door_on_Gozo_by_Matthias_Niess_FIX.jpg"
https://bugs.launchpad.net/ubuntu/+source/wallpaper/+bug/1815368/+attachment/5237509/+files/Wall_with_door_on_Gozo_by_Matthias_Niess_FIX.jpg
** Description changed:
At
Thanks for the reply. I just retested it today and the issue is
reproducible in both 18.04 LTS and 18.10, all updated.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1759528
Title:
Pressing the F10
Thanks, I've updated the description accordingly.
** Description changed:
+ [Impact]
+
+ qemu static binaries disadvantageously get their binfmt rule created
+ without the fix-binary flag. This breaks cross-architecture dockers,
+ flatpak-builder, chroots and generally most use cases that
Public bug reported:
qemu-user-static in 18.04 invokes update-binfmts without --fix-binary
which can break the binfmt emulation when namespaces or chroots are
involved. Specifically this defuncts cross compiling when relying on
binfmt.
Newer versions already set --fix-binary for the static
Public bug reported:
lxd-tools used to ship the fuidshift command which is useful for
shifting UIDs and GIDs of the container root filesystem in order to
convert privileged into unprivileged containers. lxd-tools is now a meta
package that will enforce that the lxd snap package is being
A update to Ubuntu received today seems to have fixed the issue.
---
$ less /var/log/apt/history.log
Upgrade: gedit:amd64 (3.28.1-1ubuntu1, 3.28.1-1ubuntu1.1),
libgweather-3-15:amd64 (3.28.1-1, 3.28.2-1~ubuntu18.04.1),
gir1.2-gweather-3.0:amd64 (3.28.1-1, 3.28.2-1~ubuntu18.04.1), gnome-
If the website has the option to let you see what you enter into the
password field then the menu will show. Example:
https://mail.protonmail.com/login
Running Firefox from the terminal after unsetting GTK_IM_MODULE fixes
it:
$ unset GTK_IM_MODULE
$ firefox
Since upgrading to 18.04 I'm unable
Git commit 55eb68ff63646050311f8b689752ad500246c916 by Harald Sitter.
Committed on 07/12/2018 at 12:55.
Pushed by sitter into branch 'master'.
fallback to dnssd service discovery if smb listDir failed on root
Summary:
This elevates a problem with newer SMB protocol versions and smbclient
Can confirm that this is reproducible with the standard Ubuntu session
in 18.04.01 and 18.10, tested both with the vanilla install with no
updates and also fully updated.
However, notice a few things:
- If you repeatedly click the checkbox it will sometimes trigger the
authentication window
-
Please also see upstream reports:
https://gitlab.gnome.org/GNOME/mutter/issues/397
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1732245
Title:
[wayland] Fullscreen games offset after returning
Are you sure this is still incorrect in cosmic? It seems to me this is
only broken in bionic.
Cosmic build log has
libssh-dev_0.8.1-1_amd64.deb
new debian package, version 2.0.
size 217956 bytes: control archive=1172 bytes.
918 bytes,21 lines
I'm affected too and thanks to the users here - especially piraten-kris
- we got an overview about the workarounds.
It was a bad suprise to start Thunderbird after regular Ubuntu update
with missing core-functionality. And it is very hard and time consuming
for an user to discover which SW-part
Yes - my comment #4 is related to bug #1797945
Thanks to smb for the clarification
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1798090
Title:
Xenial update of thunderbird seems to have broken
same here - on 16.04. the "internal" Lightning calendar disappearead
since it is not longer compatible with TB60.
Need to install the package "xul-ext-lightning" which I removed in the
past, because it provides only the english version.
--
You received this bug notification because you are a
Unfortunately after system update the bug appeared again!
Kubuntu applications hide mounted NTFS folders so that the the data can
not be accessed by Kubuntu applications. GTK Applications do work as
expected.
Test fstab:
#
#
# / was on /dev/sda8 during installation
After apt-get update on 18.04.1 the problem still existed.
Than, I performed a complete new installation of kubuntu 18.04.1 from
CDROM on the same computer(s), empty home directory too. The issue
disappeared on all computers?!
The fresh kubuntu 18.04.1 installation fixed the bag. No idea why.
Just tried Ubuntu 18.04.1 LiveCD. LiveCD starts applications can be
executed.
However, after installation of 18.04.1 just the graphical login screen
was displayed. I can enter user and password but after pressing enter
the login screen always is displayed again and again.
But I could login by
Thanks for fast answer. Downloaded latest image 2018-07-23 available.
The nouveau driver of that image works. Ubuntu Desktop could be
installed now.
ubuntu@ubuntu:~$ uname -a
Linux ubuntu 4.15.0-23-generic #25-Ubuntu SMP Wed May 23 18:02:16 UTC 2018
x86_64 x86_64 x86_64 GNU/Linux
Installation of Ubuntu 18.04 desktop is not possible. There is no display
output at all.
Info: At the same prepared multi-boot-system Windows works well.
Test result with an old Radeon HD4050 graphics card: Ubuntu LiveDVDs run
well.
** Changed in: linux (Ubuntu)
Status: Incomplete =>
Public bug reported:
Hi,
I tried to install Ubuntu 18.04 on a system with MSI X370 SLI PLUS motherboard
(Bios Version 7A33v3C of 2018-05-04), Ryzen 7 1700 and Nvidia GT 1030 graphics
card.
The 18.04 LiveDVDs do not work at all. There is no display output.
On BIOS version 7A33v39 of
Thanks for answer. Command apport-collect 1782880 has been executed
successfully.
The problem seems not to be related to any kernel version. It looks like that
it is a plasma issue only.
The reported problem pop up after an update some time ago, also on another
computer that contains kubuntu
1 - 100 of 8421 matches
Mail list logo
