I was also unable to use NFS mounts since upgrading my client to 22.04.
My server is a QNAP running version 5.0.0.1986.
Enabling NFSv4 on the server did not solve the issue.
Adding vers=3 as a mount option on the client lets NFS mounts work again
for me.
--
You received this bug notification
This is still an issue with 4.8.0-32-generic, on the 2016 Dell XPS 13.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1161962
Title:
XPS 13 wakes up from suspend spontaneously
To manage
Martin,
I can report that my XPS 1340 failed to boot with 3.2.0-23.36, but
3.2.0-24.37 from -proposed fixed the problem for me.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/984387
Title:
[Dell
Hmm, it works across reboots for me, without adding anything to
/etc/rc.local. I am back on Ubuntu 10.04 though.
One thought is that perhaps you need to update your initramfs to make
your config change apply to the module which is loaded during boot. See
if running sudo update-initramfs -u makes
I don't know if it still occurs in Lucid, this bug report was from a
past life. I don't need to care about this anymore.
The bug description includes a trivially simple method to reproduce. If
you wanted to actually help Ubuntu improve (rather than just karma
whore) you could attempt to reproduce
Disabling ADMA gets around this issue.
I've attached a modprobe configuration file which does this. After
creating this file into /etc/modprobe.d and reloading the sdhci kernel
modules (rmmod sdhci_pci and sdhci, then modprobe sdhci_pci), I can use
the card reader on my E6510.
** Attachment
I can confirm this on a Latitude E6510 with 2.6.35-020635rc5-generic
from the mainline kernel repo. When I insert an SD card, I get the
following in my dmesg:
[10620.483522] mmc0: ADMA error
[10620.485542] mmc0: Got data interrupt 0x0200 even though no data
operation was in progress.
** Changed in: linux (Ubuntu)
Status: Incomplete = Confirmed
--
Ubuntu 10.04 64 bit on Dell Lattitude E6410: Failed to read MMC card
https://bugs.launchpad.net/bugs/605043
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Unfortunately I have to take back what I said about this being fixed in
2.6.35-rc1. It still fails to resume from sleep sometimes. Where 2.6.32
would reboot on resume, 26.35-rc1 just hangs instead. It does work
sometimes, but not always.
--
failure to resume after suspending for the second time
Sebastian, I suggest opening a separate bug, your issue sounds quite
different to mine. My bug is just about suspend, and seems to be already
fixed in kernel 2.6.35-rc1. If you think your bug is a kernel bug, you
can run ubuntu-bug linux-image-2.6.32-22-generic, which will run a
program to upload
In my original report I said that short suspend periods were okay, but
longer periods could not be resumed from. I think what is actually the
case is that the first resume works okay, but the second time you try to
resume, the machine fails to resume (and then reboots). The duration of
time for
Public bug reported:
I suspend this laptop by closing the lid. If it is only suspended for a
short period (e.g. suspend when I leave the office, go home, have
dinner, then resume), it resumes with no problem.
If it is suspended for a long period (e.g. overnight), it fails to
resume. When I open
** Attachment added: AlsaDevices.txt
http://launchpadlibrarian.net/49854491/AlsaDevices.txt
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/49854492/BootDmesg.txt
** Attachment added: Card0.Amixer.values.txt
Public bug reported:
Saw the crash report after wake from suspend.
ProblemType: KernelOops
Annotation: Your system might become unstable now and might need to be
restarted.
Architecture: amd64
ArecordDevices:
List of CAPTURE Hardware Devices
card 0: NVidia [HDA NVidia], device 0:
** Attachment added: AlsaDevices.txt
http://launchpadlibrarian.net/34346126/AlsaDevices.txt
** Attachment added: AplayDevices.txt
http://launchpadlibrarian.net/34346127/AplayDevices.txt
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/34346128/BootDmesg.txt
**
Public bug reported:
Binary package hint: bash-completion
jsc...@jscott-laptop:~$ lsb_release -rd
Description:Ubuntu 9.04
Release:9.04
jsc...@jscott-laptop:~$ apt-cache policy bash-completion
bash-completion:
Installed: 20080705ubuntu3
Candidate: 20080705ubuntu3
Version table:
Public bug reported:
Binary package hint: git-core
After upgrading to Jaunty, I found that one of my elisp functions had
broken. It took a bit of digging to work out that this happened because
git-core installs its own version of vc-git to
git-core:
Public bug reported:
I am the (sponsered) maintainer of the openoffice.org-en-au package in
Debian. I have updated the package for the myspell-en-au dictionary so
that it installs the files necessary to integrate with the Debian Emacs
ispell/flyspell mode according to Debian dictionary policy. I
** Attachment added: diff.gz for openoffice.org-en-au 2.1-4
http://launchpadlibrarian.net/26799129/openoffice.org-en-au_2.1-4.diff.gz
--
Australian English dictionary does not register with Emacs.
https://bugs.launchpad.net/bugs/377177
You received this bug notification because you are a
Sebastien, I cannot reproduce this anymore, so I'll mark it as fixed. This is
with
gvfs 1.2.1-0ubuntu1.
One oddity is that the volume name of the DVD drive in nautilus gets set
to the volume label of the first DVD I insert, and does not change when
I eject the DVD or insert a different DVD, but
Public bug reported:
Nvidia driver 180.41 is available. It claims to fix several crashes, see
http://www.nvnews.net/vbulletin/showthread.php?p=1963540 for details.
** Affects: nvidia-graphics-drivers-180 (Ubuntu)
Importance: Undecided
Status: New
--
nvidia driver 180.41 is
I can't test this, I don't believe I have that hardware anymore.
--
[mga] mode validation seems to treat ModeLines and DDC dtimings differently
https://bugs.launchpad.net/bugs/12502
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
It seems that this line:
merge key=input.x11_options.ButtonMapping type=string1 8 3 2
9/merge
in my HAL policy file was the cause of the problem. Scrolling up was
emulating a click of button 4, which was getting re-mapped to button 2,
which caused a paste event rather then a scroll event. I have
Yep, that fixes it.
--
ath9k module spams logs with ForceXPAon: 0
https://bugs.launchpad.net/bugs/325469
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
*** This bug is a duplicate of bug 325469 ***
https://bugs.launchpad.net/bugs/325469
** This bug has been marked a duplicate of bug 325469
ath9k module spams logs with ForceXPAon: 0
--
[Unknown 14] ath9k continually spams ForceXPAon: 0
https://bugs.launchpad.net/bugs/325956
You received
This is a clean install of Jaunty.
Sorry about the versions, I got them from the wrong place. Looking at my
Debian changelogs, the versions currently installed are:
nautilus (1:2.25.4-0ubuntu1) jaunty
gvfs (1.1.5-0ubuntu1) jaunty
It happens every time on the two video DVDs I've tried. Both DVDs
** Attachment added: xorg.log
http://launchpadlibrarian.net/22156020/xorg-emulation-broken.log
** Tags added: jaunty
--
Emulation of middle button and scroll wheel is broken.
https://bugs.launchpad.net/bugs/326769
You received this bug notification because you are a member of Ubuntu
Bugs,
Public bug reported:
I use a Logitech Marble Mouse trackball, and have a hal policy file
setup with the following rules:
?xml version=1.0 encoding=UTF-8?
deviceinfo version=0.2
match key=info.product string=Logitech USB Trackball
merge key=input.x11_options.ButtonMapping type=string1 8 3 2
** Description changed:
linux (2.6.28-6.17) jaunty
The kernel spams my logs with hundreds of messages like:
Feb 5 07:04:30 yoshi kernel: [ 257.465945] ForceXPAon: 0
Feb 5 07:04:30 yoshi kernel: [ 257.645954] ForceXPAon: 0
Feb 5 07:04:31 yoshi kernel: [ 257.885991]
Public bug reported:
linux (2.6.28-6.17) jaunty
The kernel spams my logs with hundreds of messages like:
Feb 5 07:04:30 yoshi kernel: [ 257.465945] ForceXPAon: 0
Feb 5 07:04:30 yoshi kernel: [ 257.645954] ForceXPAon: 0
Feb 5 07:04:31 yoshi kernel: [ 257.885991] ForceXPAon: 0
Feb 5
Public bug reported:
Binary package hint: gvfs
Current jaunty:
gvfs 1.0.2-0ubuntu1
nautilus 1:2.24.1-0ubuntu1
To reproduce:
Insert a DVD into the DVD drive.
From the menu at the top of the desktop screen, select Places-CD-RW/DVD±RW
Drive.
The following error dialog is shown:
Unable to scan
I'm also getting this on Fedora 9 PPC. I don't think seahorse is
installed. Besides the SSH_AUTH_SOCK workaround, another workaround is
to run ssh-add once after logging in.
--
ssh Agent admitted failure to sign using the key
https://bugs.launchpad.net/bugs/201786
You received this bug
*** This bug is a duplicate of bug 218801 ***
https://bugs.launchpad.net/bugs/218801
** This bug has been marked a duplicate of bug 218801
[hardy] Cannot install from PowerPC desktop cd.
--
xubuntu 8.04 fails mirror selection during install
https://bugs.launchpad.net/bugs/218291
You
I've just revisited this after upgrading my system to hardy. I still
need to apply my patch to openssl version 4.7 from hardy, including the
call to ENGINE_set_default_ciphers(ENGINE_by_id(padlock)). Without
that call, I was still only getting about 5.6 MB/s.
Ian, are you passing any command line
I just assumed it wasn't assigned to anyone because powerpc is no longer
a supported architecture.
--
[gutsy] sleep on powerbook crashes
https://bugs.launchpad.net/bugs/144305
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
I know this is pending on upstream Debian activity, but just for the
record this bug is still current on gutsy/powerpc.
--
no ghci in edgy (regression vs dapper)
https://bugs.launchpad.net/bugs/70302
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug
Snam, going back to the older vmware-player-kernel-modules-2.6.15-29
(2.6.15.11-12) would work, but that's disappeared from the archives
already so unless you have an old copy somewhere, it's not possible.
What I did was remove vmware-player and install it from a tarball
provided by VMware. I
Public bug reported:
Binary package hint: vmware-player
After upgrading from vmware-player-kernel-2.6.15-2.6.15.10-12 to -13,
vmware player no longer works. The error message says:
Version mismatch with vmmon module: expecting 137.0, got 138.0.
You have an incorrect version of the `vmmon'
Public bug reported:
Binary package hint: xserver-xorg-video-ati
I run a script which uses the new xrandr features to setup my video
outputs depending on whether or not my iBook (with a Radeon 9200) has an
external monitor connected. As part of this process, the script will run
xgamma -gamma
Nope, this bug still exists in gutsy.
Timo, do you know what part of X could be causing this? I'm just not
sure that the radeon driver is the best package to own this bug. On
these iBook/Powerbook systems, the backlight is controlled via the PMU.
This bug might be better resolved if the issue
This is a dupe of bug 144305, which has a patch you can try.
--
suspend-resume regression in ibook under kernel 2.6.22-9 and up
https://bugs.launchpad.net/bugs/140977
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs
This bug is still present with xserver-xorg-video-ati
1:6.7.195-1ubuntu2.
** Changed in: xserver-xorg-video-ati (Ubuntu)
Status: Incomplete = Confirmed
--
xrandr and radeon drives BenQ FP231W incorrectly
https://bugs.launchpad.net/bugs/150092
You received this bug notification because
Sleep doesn't work on my iBook G4 either. It used to work in Feisty.
One strange thing I've noted is that when the machine goes to sleep,
after the LED starts breathing (fading in and out to show the machine
is asleep), the LCD backlight turns on.
Ben, I haven't been able to get your workaround
Okay, I'm sure your workaround is the way to go, it's just the
implementation which doesn't seem to be the same between my computer and
yours.
Notes:
If I manually switch to vt1 and sleep using /usr/lib/hal/hal-system-
power-pmu sleep, it sleeps and resumes fine.
Also, if I sleep from X by
This patch mostly fixes it for me . . . I can now confidently close the
lid to suspend, and open it without a crash.
The only issue is that the call to chvt after resume does not always
work, so sometimes I need to switch vts manually. But it sure beats
having the machine lock-up.
** Attachment
I can confirm this.
** Changed in: openoffice.org (Ubuntu)
Status: New = Confirmed
--
openoffice.org-common package conflict
https://bugs.launchpad.net/bugs/152134
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
Public bug reported:
Just upgraded to gutsy today. I have a BenQ FP231W connected to my
laptop's Radeon 9200. I try to turn off the laptop panel and use only
the FP231W:
xrandr --output LVDS --off --output VGA-0 --auto
This does switch off the laptop panel and enable the external display,
but
Unfortunately this doesn't actually work.
I run the following test:
scp -c aes128-cbc 100meg.test localhost:/dev/null
And the throughput is the same with openssh 4.6 as it was with openssh
4.3. (6.0 MB/s on my EN12000E board).
--
OpenSSH should support VIA PadLock
The original implementation of --with-ssl-engine doesn't seem to me to
do anything at all, because it relies on an ugly re'#define which is not
included anywhere it's needed. Even with that included in the
appropriate spots, the padlock engine is still not being used.
I've attached a works for me
*** This bug is a duplicate of bug 32042 ***
https://bugs.launchpad.net/bugs/32042
** Changed in: mesa (Ubuntu)
Status: Needs Info = Confirmed
--
no gl manpages available
https://bugs.launchpad.net/bugs/35632
You received this bug notification because you are a member of Ubuntu
Bugs,
I'm pretty sure that after I updated this laptop to Breezy and then
Dapper there was no problem. The machine is no longer in use; Dapper was
the last OS I tried on it.
** Changed in: laptop-detect (Ubuntu)
Status: Needs Info = Fix Released
--
toshiba satellite 4600 runs at half cpu speed
Grrr . . . this update should never have got out of dapper-proposed.
I can confirm the LD_LIBRARY_PATH=/usr/lib/firefox evolution
workaround.
--
evolution breaks with libnss update
https://launchpad.net/bugs/88990
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Here's a diff to apply to the upstream guikachu sources, to create an up
to date deb.
** Attachment added: diff.gz for guikachu 1.5.10
http://librarian.launchpad.net/5627592/guikachu_1.5.10-1.diff.gz
--
please upgrade to new version
https://launchpad.net/bugs/78281
--
ubuntu-bugs mailing
Public bug reported:
Binary package hint: guikachu
The version currently in the repos (1.4.0) is very old (it uses GNOME1),
and is buggy. I tried following the tutorial at
http://cactus.rulez.org/projects/guikachu/tour/, but it always crashes
when I try to add a button during Creating a Form.
** Bug watch added: Freedesktop Bugzilla #6502
https://bugs.freedesktop.org/show_bug.cgi?id=6502
** Also affects: xserver-xorg-driver-ati (upstream) via
https://bugs.freedesktop.org/show_bug.cgi?id=6502
Importance: Unknown
Status: Unknown
--
RandR stops working with MergedFB
I can confirm the bug report and the workaround.
** Changed in: xorg (Ubuntu)
Status: Unconfirmed = Confirmed
--
video playback problem on external monitor
https://launchpad.net/bugs/55646
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Yeah, it still exists in current edgy.
--
ibook pseudo-numpad acts as directional keys
https://launchpad.net/bugs/37719
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
I can confirm this in current edgy: ati radeon 9200, merged fb clone,
xrandr stops working sometimes after disconnecting the external monitor.
Other times it works fine. Could be sleep related (I can't rule it out,
because I have had the system suspended before the error occurs).
** Changed in:
Yes.
Actually, it's even worse now. It seems that Dapper globally binds the
PrintScn key to take a screenshot.
--
a2ps emacs startup binds key to 'f22' for printscn
https://launchpad.net/bugs/537
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
This is still an issue in Edgy.
--
Brightness reset to max when starting/restarting Xorg or waking from sleep
https://launchpad.net/bugs/36956
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Till: please do make this change. The recommended driver for HP1100 and
HP1100A should be ljet4.
--
hpijs is recommended for hp laserjet 1100A but ljet4 prints better
https://launchpad.net/bugs/16703
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Public bug reported:
Binary package hint: guile-www
After installing guile-www, there should be an entry for its info file
in the info directory. But there isn't.
Fix: postinst/prerm files need to be added to this package to call
install-info. The info page should go into the section The
Are there different forks of this library? I found a version 2.5 which
seems very much GPL'd:
http://www.audiocoding.com/modules/mydownloads/singlefile.php?cid=1lid=23
--
-w option for stdout output doesn't work
https://launchpad.net/bugs/826
--
ubuntu-bugs mailing list
Btw, the -w option seems to work for me.
I use it with slimserver to convert m4a to flac for streaming to a
sqeezebox like so. I have the following line in my slimserver config to
get flac on stdout.
[faad] -w -d -s 44100 -f2 $FILE$ | [flac] -cs --fast --endian=little
--channels=2 --bps=16
Public bug reported:
On my ppc dapper system, a basic apt-get source faad ; cd
faad2-2.0.0+cvs20040908+mp4v2+bmp/ ; dpkg-buildpackage -rfakeroot ends
with the following:
make[3]: Entering directory `/tmp/faad2-2.0.0+cvs20040908+mp4v2+bmp/plugins'
Making all in mpeg4ip
make[4]: Entering directory
** Bug watch added: Debian Bug tracker #377244
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=377244
** Also affects: Debian via
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=377244
Importance: Unknown
Status: Unknown
--
Amarok xine backend can't play FLAC files (1.4.1).
Two links I found
http://www.last.fm/group/amaroK+users/forum/18538/_/128520/_/1487619
and http://www.kde-forum.org/lastpost/14963/Amarok-14-and-FLAC.html
suggest that a libxine upgrade should fix this.
** Changed in: amarok (Ubuntu)
Status: Unconfirmed = Confirmed
--
Amarok xine backend
bug 48612 is the corresponding xine bug:
https://launchpad.net/distros/ubuntu/+source/xine-lib/+bug/48612
--
Amarok xine backend can't play FLAC files (1.4.1).
https://launchpad.net/bugs/52365
--
kubuntu-bugs mailing list
kubuntu-bugs@lists.ubuntu.com
I can confirm that this happens in current dapper.
** Changed in: samba (Ubuntu)
Status: Needs Info = Confirmed
--
samba after resume from suspend to disk crashed
https://launchpad.net/bugs/26690
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Public bug reported:
Binary package hint: gnome-system-tools
On an up to date dapper system, I run Shared Folders from the
Administration menu. When I click the Help button, instead of
getting help, I get the following message:
Could not display help
Unable to find the help files in either
** Changed in: libifp (Ubuntu)
Status: Unconfirmed = Confirmed
--
Only works as root
https://launchpad.net/bugs/48871
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Thanks for your comment Jonathan. It has helped me with the permissions
issue.
To stop rhythmbox from automatically popping up, go to
System-Preferences-Removable Drives and Media, select the multimedia
tab, and clear the box that says Play music files when connected.
--
Only works as root
Public bug reported:
Binary package hint: totem
I was trying to watch video from http://www.abc.net.au/vod in WMV
format. However, I always get Click here to download the appropriate
plugin message.
Clicking through reveals that the plugin mimetype is video/x-ms-asf.
Looking at about:plugins
** Bug 49765 has been marked a duplicate of this bug
--
No non-unicode wxWidgets 2.6
https://launchpad.net/bugs/3194
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
*** This bug is a duplicate of bug 3194 ***
** This bug has been marked a duplicate of bug 3194
No non-unicode wxWidgets 2.6
--
Unicode-enable is the only available version of this package, won't compile
non-unicode-enable source code
https://launchpad.net/bugs/49765
--
ubuntu-bugs mailing
** Changed in: Ubuntu
Status: Unconfirmed = Rejected
--
I don't have a choice between logout options.
https://launchpad.net/bugs/45587
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
76 matches
Mail list logo
