Public bug reported:
Other software sources have all been disabled after encountering this
problem. That change did not resolve the problem unfortunately.
Hopefully reporting the bug is helpful and will also allow to me better
see what the error is.
Regards Rob
ProblemType: Bug
DistroRelease
re disabled auto mute, the problem was detected while auto mute was enabled. I
only disabled it while experimenting with alsamixer, and did not change it back
because it did not affect my user experience at all.
Perhaps it is relevant to know that I keep a set of old self powered computer
Public bug reported:
Summary:
PC has
Card: HD-Audio Generic
Chip: Realtek ALC887-VD
Ubuntu 15.10 64-bit
pulseaudio 1:6.0-0ubuntu13
- working rear audio jack connected to speakers - volume controlled from
Settings>Sound>Sound Output tab.
- nonworking front headphone jack - no corresponding
Public bug reported:
During upgrade from 15.04 to 15.10, muon froze when configuring salt-
minion. I later discovered that salt-minion had a configuration file
change and required input from the user as to whether to keep the
existing config or replace it with the new upstream configuration. I
Public bug reported:
Since upgrade to 15.10, I've had several xorg crashes per day. Seems to
happen when a new window is being created or when moving a window from
one monitor to another.
ProblemType: Bug
DistroRelease: Ubuntu 15.10
Package: xorg 1:7.7+7ubuntu4
ProcVersionSignature: Ubuntu
Add me too to the list of people experiencing this problem.
I've been getting it for a while now, since installing Xubuntu 15.04 in
the spring, and even after recently installing 14.04LTS.
The last time I got this (a few minutes ago) I was re-enabling the
network after disabling it because of a
** Changed in: systemd (Ubuntu Trusty)
Status: Triaged => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1325142
Title:
failure to update libpam-systemd in 14.04 due to missing
Hopefully I'm putting this to the right package...
** Package changed: ubuntu => xserver-xorg-video-intel (Ubuntu)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1509721
Title:
strange display
I'm running Vivid 15.04 with kernel 3.19
I have the ath10k 1.1 deb package installed for the last couple of months, and
I've usually been getting only a couple of MBs downstream on a 150MB
connection. Occasionally, I've been getting less than 1 MB, but now it's
dropped to ~256Kb fairly
I can confirm that my Weather
sensors->Arduino->USB->(Python+Apache+XUbuntu) serial communication is
back to reporting my weather 24/7 as normal. Your assistance in fixing
this quickly for us is greatly appreciated.
--
You received this bug notification because you are a member of Ubuntu
Bugs,
I missed downgrading libexiv2-14 from the ppa version. Once downgraded
everything works.
** Changed in: digikam (Ubuntu)
Status: New => Invalid
** Changed in: libkexiv2 (Ubuntu)
Status: New => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs,
Public bug reported:
I'm not sure if this is a bug or if I screwed up something
I get this if I try to start digikam from the command line in a fresh
install of Kubuntu Wily:
digikam: symbol lookup error: /usr/lib/libkexiv2.so.11: undefined
symbol:
This has not affected me for quite some time - since, I think, Mint 17.
I am on Mint 17.2 (Rafaela), Nemo 2.6.7+rafaela, ibus 1.5.5-1ubuntu3 (in
case that is relevant).
Bookmarks are showing under "My Computer" in the left-hand pane, which
is where I want them (I need to figure out how to make
No further feedback, please ?
Sorry for not being familiar with the syntax of the update from Mathew
(2015-09-17) ... It is not clear to me what this update means: is there any fix
out there, either in MATE, in Cairo, or elsewhere ?
--
You received this bug notification because you are a
I have found the "serial" library no longer works in Python.2.7. I
discovered this when using Python to read and parse a serial stream from
my Arduino Uno based weather station. The Arduino listens in on 433MHz
signals from my Oregon Scientific weather station sensors and sends a
stream of
I also found it first in PySerial, but it affects everything down to the
underlying poll() implementation. Demo C code is attached (compile with
-Wall -std=gnu99). Under -63 the poll() call blocks for the 1 second
it's supposed to, a ping is sent once a second, and if you short pins
2-3 of the
Mathew,
very sorry but the status updates from you are not so clear to me:
- I encounter the same problem on my Trusty 14.04.3 with "cairo-dock" version
3.4.0 (Cairo Dock autoloading on bootup, not possible to logout from Cairo)
- is there a fix for these versions (the delayed start suggested
oops, sorry I see my mistake: Cairo is of course not starting on bootup, but
indeed during user session start : I put an entry in /etc/xdg/autostart.
The workaround with a delayed start (by adding "X-GNOME-Autostart-Delay=N" in
/etc/xdg/autostart/cairo-dock.desktop) doesn't work. It starts
Confirming this issue remains in Ubuntu Desktop 15.04.
Fresh OS install. Guake installed via Ubuntu Software Center.
Manually executing the suggested gconftool-2 command fixes the issue.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
great... due to that "feature" i just lost a day of precious working time and
had to drive almost 100 miles for nothing. following this thread to find out
why /etc/init.d/networking restart not working anymore (and causing lots of
unwanted effekts and in the end lost connectivity ) to find out
I don't think this a a duplicate of
https://bugs.launchpad.net/bugs/1308154 as is claimed here. I can enter
brackets just fine at the regular command line and I get a nice pretty
printed a_0 for a[0].
** This bug is no longer a duplicate of bug 1308154
wxmaxima 13.04.2-2 fails to get some
I find the message as to where the segfault occurred changes when I swap
to different menus. For example when I choose the solve instead of
integrate as I was using, I get:
(gdb) run
Starting program: /usr/bin/wxmaxima
[Thread debugging using libthread_db enabled]
Using host libthread_db
It seems to be fixed in Peter Pall's nightly builds here:
https://launchpad.net/~peterpall/+archive/ubuntu/wxmaxima-nightlies
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1311770
Title:
wxmaxima
*** This bug is a duplicate of bug 1308154 ***
https://bugs.launchpad.net/bugs/1308154
I notice that it occurs when I use the handy windows that pop up when
you use the menus to help the novice get what they want. If you type
the command in the regular work window, parenthesis work fine.
*** This bug is a duplicate of bug 1308154 ***
https://bugs.launchpad.net/bugs/1308154
I ran wxmaxima at the terminal and got the following backtrace that
might be helpful.
frohro@frohro-e6420:~$ wxmaxima
*** buffer overflow detected ***: /usr/lib/maxima/5.35.1/binary-gcl/maxima
terminated
Confirm fix works.
$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric RefUse Iface
0.0.0.0 192.168.0.254 0.0.0.0 UG1024 00 eth1
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 00 wlan1
Zeth - check the mDNS settings listed in this bug:
https://bugs.launchpad.net/ubuntu/+source/likewise-open/+bug/25 if
you have domains in your environment that end with ".local"
You can also use "/opt/pbis/bin/config DomainManagerIgnoreAllTrusts
true" and then add specific trusts you wish to
Public bug reported:
rob@DesktopUbuntu:~$ lsb_release -rd
Description:Ubuntu 14.04.3 LTS
Release:14.04
Ubuntu Software Center 13.10 (XUbuntu)
I have had a problem with connecting my phone as a memory/disk device on
Ubuntu 14.04 and found the same with a live install of 15.04. I
Sorry there is no change, as I don't know enough to nominate what
Package or Project may be appropriate to direct this report to. I could
find things using (Choose...) but have no evidence they are connected to
the issue I have had.
My apologies for not being able to help out here.
--
You
Public bug reported:
Issue arose while running "do-release-upgrade -d" from 15.04 to 15.10
Kubuntu beta.
ProblemType: Package
DistroRelease: Ubuntu 15.10
Package: mythtv-backend 2:0.27.1+fixes.20140624.aa822f5-0ubuntu3
ProcVersionSignature: Ubuntu 3.19.0-26.28-generic 3.19.8-ckt4
Uname: Linux
I have exactly the same problem using latest version - mango-lassi
001+dfsg-5 - on Ubuntu 14.04. Any chance of a fix?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1247460
Title:
"Input Device
Public bug reported:
???
ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: cups-bsd 1.7.2-0ubuntu1.6
ProcVersionSignature: Ubuntu 3.16.0-46.62~14.04.1-generic 3.16.7-ckt15
Uname: Linux 3.16.0-46-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.14.1-0ubuntu3.12
Architecture:
Public bug reported:
nothing special, just simply the system tried to install the standard
updates.
ProblemType: Package
DistroRelease: Ubuntu 15.04
Package: cups-browsed 1.0.67-0ubuntu2.4
ProcVersionSignature: Ubuntu 3.19.0-26.28-generic 3.19.8-ckt4
Uname: Linux 3.19.0-26-generic i686
Public bug reported:
Ran into this issue after upgrade to vivid.
ProblemType: Package
DistroRelease: Ubuntu 15.04
Package: linux-image-3.19.0-25-generic 3.19.0-25.26
ProcVersionSignature: Ubuntu 3.19.0-26.28-generic 3.19.8-ckt4
Uname: Linux 3.19.0-26-generic x86_64
NonfreeKernelModules: wl
** Tags added: wishlist
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1487578
Title:
xsidplay2 needs packaging
To manage notifications about this bug go to:
Public bug reported:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
the package xsidplay -- no longer maintained -- was last packaged for Ubuntu
in Precise. The successor project, xsidplay2, has been updated several times,
as recently as May 2015, but is not packaged in the repositories. This
Confirmed, this happens to me on a fresh install of 15.04 where the
Documents/Downloads/etc. folders are symlinks to other physical drives
mounted via fstab.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Problem still present in 14.04 LTS
A family member inadvertently changed their User Account to Login without
password and subsequently I was unable to revert this change until I
discovered the nopasswdlogin group and manually removed them from that group.
** Summary changed:
- Disabling then
I've got the 'other vibrations' setting disabled and I'm still getting
vibrations from certain buttons.
My issue (which was marked as a duplicate of this) is
https://bugs.launchpad.net/music-app/+bug/1438302. In my case it
definitely isn't an issue with the discoverability of the setting.
--
i switched distro's and the problem is gone. i went with mate, kernel is
now 3.19.0-25 and all is good.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1473596
Title:
resume from suspend fails, works
Unless I'm missing something, #211 explicitly says kernel = 3.2 only
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1383184
Title:
Atheros Qualcomm Killer N1525 Wireless-AC [168c:003e] is not
Would it be too much to ask for this bug to not be marked as fix
released, given that it's not fixed?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1290847
Title:
pyvenv fails due to mising
sure but it's the same.
HP Pavilion 6000 series, HP p6706f
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1473596
Title:
resume from suspend fails, works thereafter
To manage notifications about
Please also fix for 14.04, given that it's a LTS release. Many people
will be using 14.04 until the next LTS release, ourselves included.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1463598
Title:
I noticed when installing the 4.2.0 kernel image there was an error
about my video cards firmware.
W: Possible missing firmware /lib/firmware/radeon/TAHITI_vce.bin for
module radeon
Perhaps this has something to do with it?
** Tags added: kernel-bug-exists-upstream
** Changed in: linux
I was wrong, the 3.19.0-22 kernel has not fixed the problem. I can't guess what
has changed other than that.
I had another bug report when I first encountered this in 15.04, bug #1461320
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
After rebooting into a previous kernel (3.19.0-22) it seems the issue is
resolved. I assume this means a change between there and kernel 4.0.0-4.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1473596
Public bug reported:
when I resume from suspend the system drops back to suspend before the
display can fully come back up. if I then try a second time it works,
but the wireless connection is dropped and can only be re-connected via
the connect to hidden network option in unity's network
Public bug reported:
may be conflict with efi
when installing from memory stick download Ubuntu 15.04 on new compaq
laptop
ProblemType: Bug
DistroRelease: Ubuntu 15.04
Package: ubiquity 2.21.25
ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3
Uname: Linux 3.19.0-15-generic x86_64
It seems this bug report is invalid after all. While the main system
was fully updated, it appears the actual server was running in a
'debootstrap' generated chroot that, while updated regularly, was
missing security related entries from the sources.list inside the
chroot environment. Please
Also please note that the server code Tyler referenced to, as far as I
can determine, imports 'ssl' from the libpython2.7-minimal package.
This bug however seems to relate to the python-openssl package.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
A stripped down version of the server code used. Using this code on a
fully patched Ubuntu 14.04 server, ssllabs will report:
This server is vulnerable to the OpenSSL CCS vulnerability (CVE-2014-0224) and
exploitable. Grade set to F.
** Attachment added: Demo server code
confirming for 15.10 as well, with nouveau driver
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1359689
Title:
cryptsetup password prompt not shown
To manage notifications about this bug go to:
*** This bug is a duplicate of bug 1359689 ***
https://bugs.launchpad.net/bugs/1359689
** Package changed: unity-control-center (Ubuntu) = ubuntu
** Summary changed:
- 15.10 reboot breaks crypt setup gui
+ 15.10 disk encryption prompt, broken?
** Description changed:
If I try to reboot
** Tags added: wily
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1359689
Title:
cryptsetup password prompt not shown
To manage notifications about this bug go to:
** Also affects: wily (Ubuntu)
Importance: Undecided
Status: New
** No longer affects: wily (Ubuntu)
** No longer affects: wily (Ubuntu Utopic)
** No longer affects: wily (Ubuntu Vivid)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
*** This bug is a duplicate of bug 1359689 ***
https://bugs.launchpad.net/bugs/1359689
** This bug has been marked a duplicate of bug 1359689
cryptsetup password prompt not shown
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
just wanted to add that I am running 15.10 dev branch and have this
issue too
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1273261
Title:
Cryptsetup error during boot:
Public bug reported:
If I try to reboot from unity the system boots to the red/orange screen
and the display goes blank. Upon pressing a key it wakes to reveal the
cli hdd crypto prompt. After the pass phrase is entered I see services
starting up and the display manger comes alive again.
Public bug reported:
I was poking around and noticed that the details panel in unity's
control center is reporting ubuntu version 15.04 whereas lsb_release
reports 15.10 which is what I installed. A very minor bug but a bug all
the same I assume.
ProblemType: Bug
DistroRelease: Ubuntu 15.10
Wow, nice going Ubuntu. Did it not occur to you that people actually
use WebGL?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1463598
Title:
Chromium 43 fails to use hardware acceleration
To
Public bug reported:
When creating a minimal https based server in python using 'from OpenSSL
import SSL' on a fully patched Ubuntu 14.04 system, the OpenSSL bug as
reported in CVE-2014-0224 seems to persist for that server. A C++
implementation with the same functionality on the same system
Can anyone who is familiar with working on kernel updates give a rough
estimate as to when they think this fix could be merged into a mainline
release. I don't mean an exact estimate, but are we talking about weeks,
months or years?
--
You received this bug notification because you are a member
+1. This needs fixing.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1451822
Title:
Regression: default login manager in kubuntu vivid (sddm) does not
provide a guest session
To manage
yes that is correct. i had no issues with 14.04.
i gave up though, i switched to a clean 15.10 and am having no issues now. i
tried a clean 15.04 first but ran into a few issues installing/booting and
decided if i was going to experience bugs they might as well benefit the alpha
development.
both the 'double resume' issue and the block of corrupt video for mouse pointer
are present in rc8.
the mouse pointer is fine in 3.13.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1461320
Title:
fglrx was 2:15.200-0ubuntu4
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1461320
Title:
first resume fails after suspend
To manage notifications about this bug go to:
well that was fun.
with the 4.1 kernel and the proprietary drivers i was trapped in cli. much fun
there.
i disabled the proprietary drivers, including the amd microcode that i
forgot i enabled. after which is still had no luck with the 4.1 kernel.
i did however boot just fine with the 3.13
I'm thinking the issue is with the microcode driver, i will test again
to see.
** Package changed: linux (Ubuntu) = amd64-microcode (Ubuntu)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1461320
I believe so, but it appears the problem still persists with the
microcode package disabled.
** Package changed: amd64-microcode (Ubuntu) = linux (Ubuntu)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
** Attachment added: wakeup
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1461320/+attachment/4417064/+files/wakeup
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1461320
Title:
first
** Attachment added: wakeup
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1461320/+attachment/4417067/+files/wakeup
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1461320
Title:
first
** Attachment added: Xorg.log
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1461320/+attachment/4417068/+files/Xorg.log
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1461320
Title:
first
** Attachment added: dmesg.txt
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1461320/+attachment/4417066/+files/dmesg.txt
** Attachment removed: wakeup
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1461320/+attachment/4417064/+files/wakeup
** Attachment removed: dmesg.txt
** Attachment added: dmesg.txt
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1461320/+attachment/4417065/+files/dmesg.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1461320
Title:
sorry it took me so long to get these for you.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1461320
Title:
first resume fails after suspend
To manage notifications about this bug go to:
** Attachment added: Xorg.log.old
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1461320/+attachment/4417069/+files/Xorg.log.old
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1461320
Title:
Matthias, that command clearly only works if you have sudo access. This
makes it a bad idea for *most* of the scripts that would need to use the
pyvenv command.
Like I said, you should not need elevated privileges to use the Python
standard library. Especially something whose purpose is to make
Yes, I see this bug also - Kubuntu 15.04
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1460445
Title:
hp-systray: No system tray detected on this system, unable to start,
exiting
To manage
Yep, I am using kvalo's kernel. I've been following instructions from
comment #150.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1383184
Title:
Atheros Qualcomm Killer N1525 Wireless-AC
I've downloaded the most current stable linux kernel (4.0.5) and also
the most recent longterm build (3.18.14).
Neither of these have the file net/nfc/nci.h
make -jX is failing for me because that file is missing:
net/nfc/nci/core.c:40:25: fatal error: net/nfc/nci.h: No such file or
directory
@jeric yeah, that's the content that should be in the file. But
actually, DON'T copy and what you see from ls -lh /the/file, because
you'll loose the formatting. The dialog that pops up from your link,
right click that and select all and copy, then paste it into a new file.
Don't forget to remove
I'm hitting the following error during the make -jX command:
net/nfc/nci/core.c:40:25: fatal error: net/nfc/nci.h: No such file or directory
#include net/nfc/nci.h
It's not a broken symlink, that file just doesn't exist. Can anyone
help?
--
You received this bug notification because you are a
@jeric I had the same problem. Those broken files (you'll prob come
across more than one) are symlinks but the targets are non-existent. The
targets are actually the content of what the files should be.
Use nautilus or whatever file explorer your using, go to the broken file
directory, and try
Incidentally, you should probably find and fix all those broken symlinks
first to save yourself from having to keep stopping and starting the
make command everytime it chokes on one of them. Run something like:
find . -type l -! -exec test -e {} \; -print
...and then go fix them.
--
You
Public bug reported:
Ubuntu installer started automatically after I confirmed I wanted a
system restore USB. (It is not clear if ythe system resure USB was
created - there is no feedback). Installer crashes with a popup We are
sorry, the installer has crashed and further information that I could
This is still present in 15.04 just installed and ran updates, copying
from ext4 to ext4.
The copy status window did show until hidden by selecting Show Desktop
in the switcher and then nothing would bring it back, status bar was
showing on the files icon in the launcher but right clicking and
Should the following lines also be changed? E.g.:
sudo kdb5_ldap_util -D cn=admin,dc=example,dc=com create -subtrees \
dc=example,dc=com -r EXAMPLE.COM -s -H ldap://ldap01.example.com
Does that dc=example,dc=com need to be replaced with
cn=krbContainer,dc=example,dc=com?
--
You
Should the following lines also be changed? E.g.:
sudo kdb5_ldap_util -D cn=admin,dc=example,dc=com create -subtrees \
dc=example,dc=com -r EXAMPLE.COM -s -H ldap://ldap01.example.com
Does that dc=example,dc=com need to be replaced with
cn=krbContainer,dc=example,dc=com?
--
You
i don't think it's the kernel after all. i just tested the previous
3.13.0-48 kernel and the issue is still present. any ideas on what to
check?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1461320
oh sorry, I didn't think I was supposed to test the unstable one. I will
do that asap.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1461320
Title:
first resume fails after suspend
To manage
same result with rc6 as with rc4. the wireless network resumes but the
system suspends immediately the first time, then the second it resumes
normally. I did notice that with the 4.1 kernels when resume is final;y
successful the pointer is temporarily replaced by a square of
multicoloured pixels,
** Tags removed: latest-bios-6.11
** Tags added: latest-bios-6.11kernel-bug-exists-upstream-4.1-rc2
** Tags removed: latest-bios-6.11kernel-bug-exists-upstream-4.1-rc2
** Tags added:
latest-bios-6.11kernel-bug-exists-upstream-4.1-rc2kernel-bug-exists-upstream
** Tags removed:
Public bug reported:
Ever since I upgraded from 14.04 through to 15.04 I have had an issue
resuming from suspend. The login pops up for a second and then the
computer suspends again. Waking a second time resume is successful.
With kernel 3.13.0 wifi was typically 'broken' upon resume with the
apport information
** Attachment added: IwConfig.txt
https://bugs.launchpad.net/bugs/1461320/+attachment/4408857/+files/IwConfig.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1461320
Title:
apport information
** Tags added: apport-collected vivid
** Description changed:
Ever since I upgraded from 14.04 through to 15.04 I have had an issue
resuming from suspend. The login pops up for a second and then the
computer suspends again. Waking a second time resume is successful.
apport information
** Attachment added: CRDA.txt
https://bugs.launchpad.net/bugs/1461320/+attachment/4408855/+files/CRDA.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1461320
Title:
first
apport information
** Attachment added: CurrentDmesg.txt
https://bugs.launchpad.net/bugs/1461320/+attachment/4408856/+files/CurrentDmesg.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1461320
apport information
** Attachment added: ProcEnviron.txt
https://bugs.launchpad.net/bugs/1461320/+attachment/4408862/+files/ProcEnviron.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1461320
apport information
** Attachment added: ProcModules.txt
https://bugs.launchpad.net/bugs/1461320/+attachment/4408864/+files/ProcModules.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1461320
601 - 700 of 3972 matches
Mail list logo
