Hi dlgandalf
You write:
High probability that the new intel driver is the culprit...
but your attached lspci says:
05:00.0 VGA compatible controller [0300]: nVidia Corporation G94 [GeForce 9600
GT] [10de:0622] (rev a1)
what intel driver do you mean?
regards
--
[Lucid] Need to switch to VT to
** Changed in: network-manager (Ubuntu)
Status: New = Incomplete
--
when plugging in new modem mobile connection wizard does less then it seems to
https://bugs.launchpad.net/bugs/500378
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
I did some more testing with the same configuration. It looks quite a bit
different now:
The wizard does in fact ask for enough to get a working connection with bob.
This public username/password combination (d...@bob.at/ppp) is not necessary to
get a connection working at full speed and with
I just got hit by this bug with lucid 20100113 (aka lucid alpha-2) iso loopback
booted from hd via grub2.
lspci -nn:
0d:06.2 SD Host controller [0805]: O2 Micro, Inc. Integrated MMC/SD Controller
[1217:7120] (rev 02)
happened 3 times out of 3 on acer extensa 5630z
did not happen 3 out of 3 on
Just tested in lucid alpha-2 (aka 20100113) 64 bit iso loopback booted from hd
via grub2:
The pin entry is still always visible.
And btw. it insist on exactly 4 digits, which bug 318265 seems to indicate
might not be right for some people.
--
nm-applet G3 modem pin entry is visible
Just tested my bob modem under lucid iso 20100113 64bit loopback booted from hd
via grub2. It basically works, but has a number of peculiarities that make the
whole experience much less smooth than it could be:
1) This bug here: This only is an issue when configuring a new modem and I
think it
Just had the opportunity to try connecting to a WLAN hub (infrastructure mode)
with lucid 20100113 64bit desktop iso (loopback from hd via grub2). Connected
immediately and always (tried 4 disconnect/reconnect cycles and one extra
shutdown/reboot cycle) and stayed connected. Connection
I have given the daily lucid 64 bit iso 20100109 some more testing via grub2
loopback. The wireless connection with rt2860sta WEP worked immediately and
reliably. Specifically I did:
disconnect and reconnect 9 times
shutdown and reboot 2 times
sleep and resume 2 times
there was 1 involuntary
I have now used the WLAN (WEP rt2860sta) on lucid 20100110 iso for the whole
day without problems. It seems safe to say that this combination works now.
However WPA WPA2 remains to be tested. It might still not work.
** Changed in: linux (Ubuntu)
Status: Fix Released = Incomplete
--
Public bug reported:
Right after boot of lucid desktop iso 20100110 64bit via grub loopback
on an Acer Extensa 5635z the touchpad did not work. Disabling the
default Disable touchpad while typing made it work. It stayed working
then even if that option was reenabled.
I have not seen this bug on
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/37683180/Dependencies.txt
--
touchpad not working right after boot from daily lucid iso on extensa 5635z
https://bugs.launchpad.net/bugs/505587
You received this bug notification because you are a member of Ubuntu
Bugs,
This bug has risen from the dead with casper 1.212. Checked by booting
todays daily lucid 64 bit iso 20100109 via grub2 loopback.
** Changed in: casper (Ubuntu)
Status: Fix Released = Fix Committed
--
regression: /etc/gdm/custom.conf messed up
https://bugs.launchpad.net/bugs/500786
You
Fixed with linux 2.6.31-18.55. I have booted todays daily lucid 64 bit
iso 20100109 via grub2 loopback. The wireless connection with rt2860sta
WEP worked immediately and reliably (I was online for 60 minutes). For
further testing I disconnected and reconnected 5 times. Worked every
time.
**
Ooops. You are right, of course.
Todays lucid iso has:
ubu...@ubuntu:~$ uname -a
Linux ubuntu 2.6.32-9-generic #13-Ubuntu SMP Thu Dec 17 17:01:59 UTC 2009
x86_64 GNU/Linux
So the fixed with statement from my previous post is wrong.
Which raises the quesetion, why does it work now?
--
[lucid]
Thank you for your report.
This bug is not present in current stable blender (2.49b).
2.49b is not yet available via ubuntu's package management system, but you can
easily get it from the download link in the above comment.
** Changed in: blender (Ubuntu)
Status: Confirmed = Fix
Thank you for your report.
Closing this bug as it is about an out of date blender on a version of
ubuntu that is not supported anymore. Please open a new report if this
problem occurs on a supported version of ubuntu with the last stable
blender.
Download the newest stable blender at
*** This bug is a duplicate of bug 425165 ***
https://bugs.launchpad.net/bugs/425165
Thanks for trying to make ubuntu better.
As you have pointed out this report is a duplicate of bug 425165 so I am
marking it as such.
As I have said in several comments of bug 425165, this has already been
** Description changed:
+ [Status]
+ Bug is fixed in Lucid.
+ Bug is not fixed in Karmic.
+
+ [Workaround]
+ As workaround disable kernel mode setting (KMS).
+ To disable KMS add the option nomodeset to the kernel boot options in the
grub config (for GRUB 2: edit /etc/default/grub and add
Lucid amd64 20100105 iso booted via grub loopback from hd logged
automatically into the desktop just fine, unsurprisingly, with casper
1.209.
@Didier
Thanks for your fast response, however this pans out.
--
regression: /etc/gdm/custom.conf messed up
https://bugs.launchpad.net/bugs/500786
You
This looks like it is strongly related to bug #500786 and
https://code.launchpad.net/~didrocks/casper/fix-derivative-live.
--
casper 1.209 caused mythbuntu live disk to stop booting
https://bugs.launchpad.net/bugs/503253
You received this bug notification because you are a member of Ubuntu
Bugs,
Personally I have always used nomodeset with my Extensa 5635z and it
works fine 100%, but I guess they both do exactly the same thing.
https://wiki.ubuntu.com/KarmicKoala/ReleaseNotes speaks of both
nomodeset and i915.modeset=0.
And graphics on my 5635z with kernel mode setting switched off are
The immediate source of my problems turned out to be bug 500786.
--
can't connect user with low UID
https://bugs.launchpad.net/bugs/498534
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Public bug reported:
Binary package hint: casper
Lucid amd64 20091222.1 iso booted via grub loopback from hd was the
first iso where I was presented with a login screen but could not login.
20091221 was the last iso with which I was able to get to the desktop
just fine.
Today I looked at
Hi Didier Roche
Could you please take a look?
--
regression: /etc/gdm/custom.conf messed up
https://bugs.launchpad.net/bugs/500786
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Lucid amd64 20091222.1 iso booted via grub loopback from hd was the
first iso where I was presented with a login screen but could not login.
20091221 was the last iso with which I was able to get to the desktop
just fine.
Based on this report I have now tried to add a new user via useradd on
the
Public bug reported:
Binary package hint: network-manager
When plugging in a new modem the mobile connection wizard asks for some
data (like APN) to configure it. It then looks to the user like it is
ready to connect. When the user then tries to connect it fails,
repeatedly.
When the user then
Comment #2 is a confirmation of the original report. Therefore setting
this bugs status to confirmed.
** Changed in: gdm (Ubuntu)
Status: New = Confirmed
--
can't connect user with low UID
https://bugs.launchpad.net/bugs/498534
You received this bug notification because you are a member
Booted 20091222.1 on Extensa 5630Z. It now boots fine to the login
screen. I can not login, thought. Switching to a console works. The
console works.
I am therefore closing this bug.
** Changed in: ubuntu
Status: New = Fix Released
--
regression: desktop-amd64 20091222 iso hangs during
Public bug reported:
Both on an Acer Extensa 5630Z and an 5635Z this iso hangs during boot. The last
line it prints is:
*Starting init crypto disks...[OK]
The iso from the day before (20091221) booted fine with this method on
the 5630Z.
** Affects: ubuntu
Importance: Undecided
Thank you Wouter for all the info.
For my rt2860sta your workaround unfortunately does not work. I get
...Operation not supported
--
[lucid] rt2860 frequently fails to connect to secured wireless networks
https://bugs.launchpad.net/bugs/496093
You received this bug notification because you are
I just checked with ubuntu lucid-desktop-amd64 20091221 (booting the iso from
hd via grub2 loopback) on the acer extensa 5635z. The display with kernel mode
setting was fine.
I also tried to switch off kernel mode setting with the nomodeset parameter.
That also works.
@David Perfors
I notice
I just checked with ubuntu lucid-desktop-amd64 20091219 (booting the iso from
hd via grub2 loopback) on the acer extensa 5635z. The display with kernel mode
setting was fine.
I plan to recheck with the next iso.
--
KMS: notebook boots but stays black
https://bugs.launchpad.net/bugs/425165
You
Just checked again with lucid 20091218. Bug is still present.
--
[lucid] rt2860 frequently fails to connect to secured wireless networks
https://bugs.launchpad.net/bugs/496093
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
I just was hit by this problem while trying to print:
http://www.ris.bka.gv.at/GeltendeFassung.wxe?Abfrage=BundesnormenGesetzesnummer=10003860
with:
firefox:
Installiert: 3.5.5+nobinonly-0ubuntu0.9.10.1
Kandidat: 3.5.5+nobinonly-0ubuntu0.9.10.1
It prints only 1 of 88 pages to pdf.
Happens on lucid, too.
I just booted the fresh daily live lucid iso 20091216 with grub2 loopback.
I had a second sound icon which was dead and the nm-applet was missing.
On a second boot the icons where o.k. (I could still not connect, see bug
496093)
(for sake of completeness: on second boot I
*** This bug is a duplicate of bug 496093 ***
https://bugs.launchpad.net/bugs/496093
I am making this bug a duplicate of bug 496093, but please do feel free
to undo that if you can point out any significant differences.
** This bug has been marked a duplicate of bug 496093
[lucid] rt2860
*** This bug is a duplicate of bug 428747 ***
https://bugs.launchpad.net/bugs/428747
** This bug has been marked a duplicate of bug 428747
Add provider BOB in Austria
--
network-manager does not know 3G carrier bob (Austria)
https://bugs.launchpad.net/bugs/417391
You received this bug
Bob has made it into upstream git:
http://git.gnome.org/cgit/mobile-broadband-provider-info/tree/serviceproviders.xml
:-)
** Changed in: mobile-broadband-provider-info (Ubuntu)
Status: Confirmed = Fix Committed
--
Add provider BOB in Austria
https://bugs.launchpad.net/bugs/428747
You
I can confirm that. I have booted a fresh daily lucid 64 bit via grub2
loopback every few days for the last week or so and have never been able
to connect to the WEP ad hoc network that I use every day with karmic (I
have to use WEP because I can not get WPA to work with that ad hoc
network under
** Changed in: mesa (Ubuntu)
Status: Confirmed = Fix Released
--
xorg-edgers regression: some buttons not showing in blender
https://bugs.launchpad.net/bugs/423624
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
I looked a bit closer than before and saw that the openal packages in karmic
(and lucid) come from the openal-soft (not openal) package.
Lucid has newer ones, so a next step could be to try how blender 2.5 behaves
under lucid.
** Package changed: openal (Ubuntu) = openal-soft (Ubuntu)
--
I think the package is openal-soft since intrepid.
I see that lucid has imported libopenal1 (1:1.9.563-1) from debian.
** Package changed: openal (Ubuntu) = openal-soft (Ubuntu)
--
OpenAL is broken
https://bugs.launchpad.net/bugs/464556
You received this bug notification because you are a
** Changed in: openal-soft (Ubuntu)
Status: Incomplete = Confirmed
--
blender 2.5 regression - cpu flatlines at 100% on default scene
https://bugs.launchpad.net/bugs/472687
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
I think the openal packages published in karmic and lucid stem from
openal-soft.
** Package changed: openal (Ubuntu) = openal-soft (Ubuntu)
--
MPlayer fails to play some files because of inconsistency detected by ld.so
(due to OpenAL)
https://bugs.launchpad.net/bugs/486414
You received this
** Description changed:
Binary package hint: xorg
Since about revision 24271 of blender 2.5 (self-compiled with scons):
reproduce:
start blender with default scene (i.e. no ~/.B25.blend file)
- within seconds one of my two cores flatlines at 100% blender use
+ sooner or later (from
Just tested the packages from pitti ppa in installed karmic on extensa 5635Z.
They neither help nor hurt, as was expected.
Status in lucid is unchanged, which means its fine :-)
--
devicekit-power fails to realize I'm on battery after AC disconnect
https://bugs.launchpad.net/bugs/384304
You
Public bug reported:
Binary package hint: kmymoney2
I just installed kmymoney2 on ubuntu karmic. The gnome desktop is german. I was
unable to change the roles of . and , in kmymoney2 to what is needed for
that locale. I was only able to do so after installing the package
sysemsettings.
Please
Public bug reported:
Binary package hint: kmymoney2
I just installed kmymoney2 on ubuntu karmic. The gnome desktop is german. I was
unable to change the roles of . and , in kmymoney2 to what is needed for
that locale. I was only able to do so after installing the package
sysemsettings.
Please
workaround 1 failed:
After leaving blender running for about one hour blender started to use up 100%
of my cpu again. The only thing new is that I now had two blender processes and
together they now used 100% of both my cores. Never seen that before. Might be
because the scene was different or
Just checked again for this bug with ubuntu lucid-desktop-amd64 20091117
(booting the iso from hd via grub2 loopback):
looks even better than yesterday. even the small issue of the superfluous
second battery icon (see twoBatteryIcons.png) is gone.
What remains is that the whole thing is not
hypothesis: karmic's version of openal is the problem
workaround 1: echo 'drivers = alsa,oss,solaris,dsound,winmm,port,wave'
~/.alsoftrc
(back up your old .alsoftrc if you have one)
restart
workaround 2:
compile blender with WITH_BF_OPENAL = 'false'
I have only tried workaround 1. So far no
Fixed in lucid. I just checked with ubuntu lucid-desktop-amd64 20091116
(booting the iso from hd via grub2 loopback).
** Changed in: linux (Ubuntu)
Status: Triaged = Fix Committed
--
KMS: notebook boots but stays black
https://bugs.launchpad.net/bugs/425165
You received this bug
Fixed for me in lucid.
Just tested for this bug with ubuntu lucid-desktop-amd64 20091116
(booting the iso from hd via grub2 loopback):
fixed the major problem:
booting on AC; after unplugging devkit-power --dump changes to on-battery:
yes (takes about 15 secs iirc)
fixed also:
when plugging in
** Attachment added: twoBatteryIcons.png
http://launchpadlibrarian.net/35779356/twoBatteryIcons.png
--
devicekit-power fails to realize I'm on battery after AC disconnect
https://bugs.launchpad.net/bugs/384304
You received this bug notification because you are a member of Ubuntu
Bugs, which
the bug is now fixed in fedora:
verified fixed in fedora nightly-composes desktop-x86_64-2009.16.iso
** Description changed:
The default boot process on the very recent acer extensa 5635z does not
display anything after grub. The backlight is on but everything stays black.
The system is
@Bruno: I just tested blender fresh from a grub2 loopmounted karmic
final iso (32 bit) from hd:
ubu...@ubuntu:~$ apt-cache policy blender
blender:
Installed: 2.49a+dfsg-0ubuntu2
Candidate: 2.49a+dfsg-0ubuntu2
Version table:
*** 2.49a+dfsg-0ubuntu2 0
500 http://archive.ubuntu.com
Maybe that is useful:
https://wiki.ubuntu.com/Backtrace
After installing debug packages of wherever the segfault happens in.
--
blenderplayer seg faults when starting
https://bugs.launchpad.net/bugs/470835
You received this bug notification because you are a member of Ubuntu
Bugs, which is
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/35027759/BootDmesg.txt
** Attachment added: CurrentDmesg.txt
http://launchpadlibrarian.net/35027760/CurrentDmesg.txt
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/35027762/Dependencies.txt
**
Public bug reported:
Binary package hint: xorg
Since about revision 24271 of blender 2.5 (self-compiled with scons):
reproduce:
start blender
within seconds one of my two cores flatlines at 100% blender use
happens both on this notebook with xorg-edgers and on an extensa 5635Z
with stock
** Description changed:
Binary package hint: xorg
Since about revision 24271 of blender 2.5 (self-compiled with scons):
+
reproduce:
- start blender
+ start blender with default scene (i.e. no ~/.B25.blend file)
within seconds one of my two cores flatlines at 100% blender use
I cannot reproduce this on 64 bit karmic release.
--
blenderplayer seg faults when starting
https://bugs.launchpad.net/bugs/470835
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
** Changed in: xorg (Ubuntu)
Status: New = Incomplete
--
blender 2.5 regression - cpu flatlines at 100% on default scene
https://bugs.launchpad.net/bugs/472687
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Hi manolo
The actual situation of this bug is documented in the status column of
this bug. It shows either invalid or fix released. This means this bug
has been declared dead. You can in general trust that declaration. You
would have to bring some pretty solid evidence that this bug has somehow
Acer Extensa 5220 with karmic final 64 bit live booted via grub2
loopback had no problem with burning wav, ogg or flac to audio cd.
--
Brasero forever normalizing,not burning audio CD
https://bugs.launchpad.net/bugs/458727
You received this bug notification because you are a member of Ubuntu
Public bug reported:
Binary package hint: aisleriot
AisleRiot Solitaire - Union Square DOES have hint support and displays
hints perfectly fine when asked. When it runs out of hints it says This
game does not have hint support yet., which is clearly false. It should
say something like No hints
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/34931101/Dependencies.txt
** Attachment added: XsessionErrors.txt
http://launchpadlibrarian.net/34931102/XsessionErrors.txt
--
This game does not have hint support yet. is false
https://bugs.launchpad.net/bugs/470159
You
** Attachment added: bug.justDeadEnd.hintSupportIsPresent.png
http://launchpadlibrarian.net/34931138/bug.justDeadEnd.hintSupportIsPresent.png
--
This game does not have hint support yet. is false
https://bugs.launchpad.net/bugs/470159
You received this bug notification because you are a
It has a pause function. Right clicking the tray icon. :-)
--
recordmydesktop save saving a previous filename
https://bugs.launchpad.net/bugs/368843
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
** Changed in: gtk-recordmydesktop (Ubuntu)
Status: New = Confirmed
--
recordmydesktop save saving a previous filename
https://bugs.launchpad.net/bugs/368843
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
** Description changed:
- Binary package hint: gtk-recordmydesktop
+ The gtk-recordmydesktop save dialogue breaks conventions, misleading
+ users. It needs a bit of a redesign.
- When attempting to save a recorded video recordmydesktop uses the last
- typed in path and filename instead of the
Yes, it definitely is a usability bug.I have set the status to confirmed.
Should have done so when I originally commented.
I have also updated the bug description.
As to how exactly a better design should look:
*A Save As pop up could quickly get annoying.
*The program currently _does_ things
Hi moma, thanks for trying to make ubuntu desktop recording and
snapshotting a better experience. I also think this is very important.
Better tools will lead to better documentation.
Tried gtk-recordmydesktop on todays karmic live 64 bit. --use-jack is
not the default there. So I think this bug
** Changed in: gtk-recordmydesktop (Ubuntu)
Status: New = Confirmed
** Summary changed:
- gtk-recordmydesktop recorded sound is badly sync'ed with video
+ gtk-recordmydesktop recorded sound is choppy and badly sync'ed with video
--
gtk-recordmydesktop recorded sound is choppy and badly
Thanks for the workaround, this fixes it on current (almost final) karmic
(installed system).
I just confirmed that the bug (at least the choppyness part, did not check for
sync) is present on current karmic live 64bit out of the box.
Changed the title to reflect both symptoms.
--
The gaps are known bug 403662. With a known workaround. I wonder whether
that workaround could be made into a fix for the package?
--
Karmic 64bit: gtk-recordMyDesktop refuses to start. Error while parsing
raguments
https://bugs.launchpad.net/bugs/435821
You received this bug notification
** Summary changed:
- Brasero won't burn flac to CD
+ Brasero forever normalizing,not burning audio CD
--
Brasero forever normalizing,not burning audio CD
https://bugs.launchpad.net/bugs/458727
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Trying with wav is likely not worth your while. Though it would make
sure that it is not a flac issue.
I did try brasero audio burning with wav and flac today on the daily
live 20091026.2 karmic-desktop-amd64.iso on an extensa 5635Z. Worked
fine all three times. So it is definitely not a general
** This bug is no longer a duplicate of bug 405544
unable to burn CD or DVD with Brasero with 2.6.31 kernel
--
Brasero won't burn flac to CD
https://bugs.launchpad.net/bugs/458727
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Just tried burning an audio cd with brasero from flac files with jaunty. It
starts normalizing, normalizes two according to the tmp file and then writes
into that file:
BraseroNormalize called brasero_job_get_tracks
BraseroNormalize called brasero_job_get_tracks
BraseroNormalize called
Further testing reveals that this is not a flac thing. Behaviour with wav is
similar.
All that as in the above comment on an Acer Extensa 5220. One caveat is that
Jaunty is missing quite a few updates.
Gnomebaker burned the flac files fine. It did however later on crash twice.
Subsequent
imclean, is the brasero problem you described restricted to flac files?
Do e.g. wmv files work?
I am quite sure this bug is not a duplicate of bug #405544. That is
about brasero not recognizing blank disks.
What I saw on jaunty looks symptomatically quite alike to what you saw
on karmic.
**
doh, sorry imclean, I meant wav files, of course.
--
Brasero won't burn flac to CD
https://bugs.launchpad.net/bugs/458727
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
** This bug is no longer a duplicate of bug 420931
zsync crashes with SIGSEGV when updating dvds
--
zsync cannot download DVD image
https://bugs.launchpad.net/bugs/412413
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
I have just replicated this bug successfully on intrepid:
$ uname -m
i686
$ apt-cache policy zsync
zsync:
Installed: 0.5-1ubuntu3.8.10.1
Candidate: 0.5-1ubuntu3.8.10.1
Version table:
*** 0.5-1ubuntu3.8.10.1 0
500 http://at.archive.ubuntu.com intrepid-proposed/universe Packages
** Summary changed:
- zsync cannot download DVD image
+ zsync 32bit cannot download DVD
** Changed in: zsync (Ubuntu)
Status: New = Confirmed
--
zsync 32bit cannot download DVD
https://bugs.launchpad.net/bugs/412413
You received this bug notification because you are a member of Ubuntu
The bug is gone on jaunty 64bit.
I updated the 4GB karmic dvd. ctrl-c'ing and resuming at 60% and again at 70%
to try to trigger the bug.
zsync on Intrepid 32bit does not work. See Bug #412413. It refuses to go
beyond 2GB. No segfault, just aborting.
--
zsync crashes with SIGSEGV when
Public bug reported:
Binary package hint: zsync
zsync is a great tool. I am currently using it almost daily to get the iso
updated to put on a stick from where I loopmount it with grub2.
I just tried to zsync directly onto a sticks FAT filesystem (can casper do only
FAT?):
console
Doh, its working just as supposed now on FAT:
wolfg...@karmic:/media/VERBAFAT/iso$ zsync
http://cdimage.ubuntu.com/daily-live/current/karmic-desktop-amd64.iso.zsync
100.0% 189.8 kBps DONE
reading seed file karmic-desktop-amd64.iso:
*** This bug is a duplicate of bug 420931 ***
https://bugs.launchpad.net/bugs/420931
Thanks psl
I think this bug is might be related to bug 420931 which seems to get
all the attention anyway.
A new package has been made available:
Scott Kitterman wrote on 2009-10-02:
Accepted into
** Changed in: ubuntu
Status: New = Incomplete
--
acerhdf: unknown (unsupported) BIOS version Gateway/M-6862/91.22, please
report, aborting! seen on boot
https://bugs.launchpad.net/bugs/446111
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
Public bug reported:
I believe there is a warning about mmc in the boot messages. And it is
the second time I file such an semi-automated crash report. First one
iirc also about mmc. And it did not detect the SD card at about this
time though I really thought the forced shutdown had to do with me
** Attachment added: AlsaDevices.txt
http://launchpadlibrarian.net/33664715/AlsaDevices.txt
** Attachment added: AplayDevices.txt
http://launchpadlibrarian.net/33664716/AplayDevices.txt
** Attachment added: ArecordDevices.txt
http://launchpadlibrarian.net/33664717/ArecordDevices.txt
** Description changed:
- I believe there is a warning about mmc in the boot messages. And it is
- the second time I file such an semi-automated crash report. First one
- iirc also about mmc. And it did not detect the SD card at about this
- time though I really thought the forced shutdown had to
The devs have worked hard and well:
mountall (0.2.2) karmic; urgency=low
[ Steve Langasek ]
* Don't emit the local-filesystem signal until after virtual filesystems
are also done mounting. LP: #448981.
[...]
-- Scott James Remnant sc...@ubuntu.com Tue, 13 Oct 2009 02:17:47 +0100
This is
Hi Dave
By the way Friday the 9ths cd worked across the board
I went digging a bit through launchpad (which has many areas I have never seen
before) and found this:
http://bazaar.launchpad.net/~ubuntu-core-dev/ubuntu/karmic/mountall/ubuntu/revision/91
shows a new mountall 0.2.1 being released
*** This bug is a duplicate of bug 448981 ***
https://bugs.launchpad.net/bugs/448981
** This bug has been marked a duplicate of bug 448981
/var/run/dbus is not getting populated on live CDs
--
[karmic] live cd not work
https://bugs.launchpad.net/bugs/448142
You received this bug
No, karmic is free of this bug as just confirmed with ubuntu daily-live
2009-10-13.
--
xorg-edgers regression: some buttons not showing in blender
https://bugs.launchpad.net/bugs/423624
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Yes, this bug is in stock karmic as just confirmed with ubuntu daily-
live 2009-10-13.
--
[G45] Blender: crash in brw_prepare_vertices after Render this window
https://bugs.launchpad.net/bugs/438657
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
There seems to be a rather widespread live-image regression since 2009-10-10.
Could you please look at bug 448495. I think it is the same. Mario, can you
start dbus, hal and gdm by hand as described in bug 448495? Do you think it is
the same bug?
I am seeing this a lot in /var/log/syslog:
Oct
I think we are all hit by bug 448981.
Iain Bucław has described a workaround in bug 448495 (a likely duplicate).
Does this workaround work for you:
sudo restart dbus
sudo start hal
sudo start gdm
My ubuntu boot stops in a console prompt. Yesterdays kubuntu boot
stopped at the graphical login
601 - 700 of 802 matches
Mail list logo
