For those of you with a Samsung laptop showing this problem, please see
this issue:
https://bugs.launchpad.net/ubuntu/+source/acpi/+bug/971061
in particular my last two posts.
I think a kernel patch can be made to flush the events from the embedded
controller, at resume, in the same
I've been running the 'fwts --interactive' test before and after hibernate.
The most significant parts:
Before:
Test 2 of 3: Test LID buttons on a single open/close.
Got 25 interrupt(s) on GPE gpe10.
Got 13 interrupt(s) on GPE gpe1D.
Got 38 interrupt(s) on GPE gpe_all.
Got 25 SCI interrupt(s).
** Attachment added: fwts --interactive test after hibernate
https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.20/+bug/89860/+attachment/3402397/+files/results-after-hibernate.log
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
I'm having the same problem using Linux Mint 13 (based on Ubuntu 12.04)
with a Compaq nc6000.
Lid state /proc/acpi/button/lid/C139/status is always set to open, but
if I hibernate (pm-hibernate) and wake-up, lid button works correctly.
acpi_listen shows in both cases (with and without
It seems a typical HP problem
For me (NC6320) I check /proc/acpi/video/C083/DOS
I fixed this in 10.04 Lucid, by putting the following lines (both
needed, in this order!) into /etc/rc.local
echo 1 /proc/acpi/video/C083/DOS
echo 0 /proc/acpi/video/C083/DOS
However, after dist-upgrade to 12.04
I have seen this problem with an Intel Classmate running Ubuntu 10.04
LTS (2.6.32-36 kernel) and also when using a stock kernel (2.6.32.59)
which enabled me to do ACPI debugging.
It turns out that the ACPI DSDT table contains a control method _Q2A,
which is repeatedly triggered by the embedded
There is a workaround for this bug which has plagued the HP Compaq
nc6120 I'm using ever since, well, forever. I was put on the track of
this workaround by reading an old Advogato blog entry
(http://www.advogato.org/person/mjg59/diary/62.html) where someone by
the handle of 'mjg59' tells about
Unsubscribe
--
Wes Garner
wesgar...@gmail.com
Mobile: 205-202-0021
Fax: 205-995-8790
On Apr 2, 2012 11:55 PM, Robert Collins 89...@bugs.launchpad.net wrote:
** No longer affects: acpi (Ubuntu)
** No longer affects: acpi-support (Ubuntu)
** Changed in: linux-source-2.6.20 (Ubuntu)
Hi, I met the same problem. I am on 11.10, upgraded from 11.04. When I
close the lid, nothing happened. It affects me very much. Could you
please provide the fix? Thanks!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
** No longer affects: acpi (Ubuntu)
** No longer affects: acpi-support (Ubuntu)
** Changed in: linux-source-2.6.20 (Ubuntu)
Assignee: Registry Administrators (registry) = (unassigned)
** Changed in: linux-source-2.6.22 (Ubuntu)
Assignee: Registry Administrators (registry) =
Same problem on Samsung Series 9 NP9003XB running 12.04 (beta 2)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/89860
Title:
/proc/acpi/button/lid/*/state always says open
To manage notifications
aysiu, there is new related bug:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/810602
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/89860
Title:
/proc/acpi/button/lid/*/state always says
This problem still occurs in Ubuntu 11.04. What is the series that's
not supported? The kernel version? I'm talking about 11.04 with the
latest kernel--the problem still exists.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
This bug was filed against a series that is no longer supported and so
is being marked as Won't Fix. If this issue still exists in a supported
series, please file a new bug.
This change has been made by an automated script, maintained by the
Ubuntu Kernel Team.
** Changed in: linux (Ubuntu)
Confirm. I have same problem with Gigabyte N601. But LID status is always
closed.
Ubuntu 11.04, x86
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/89860
Title:
/proc/acpi/button/lid/*/state always
i confirm that bug still occurs in ubutu 11.04.
There is no /proc/acpi/video/*/DOS, it was there in beta version of 11.04 and
echo 1 ... workaround was working like charm.
Now we stuck with no solution...Please help. Maybe other kernel? anything -
this is very irritating bug
--
You received
Bug still present in 11.04 . HP 530 notebook. The only thing that does
not seem to work is the lid.
cat /proc/acpi/button/lid/C20C/state
state: open
State is always open, even when I press the little button that should turn off
screen (on my HP the screen margins press on a little button
Works for my HP compaq nc6000
Though my command is slightly different:
echo 1 /proc/acpi/video/C0CF/DOS
echo 0 /proc/acpi/video/C0CF/DOS
My current system is:
Ubuntu 10.04.2 LTS
2.6.32-28-generic
According to the thread mentioned in previous post the problem could be caused
by the patch
Those 2 commands work for me too on my HP NC6000 (ubuntu 10.10)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/89860
Title:
/proc/acpi/button/lid/*/state always says open
--
ubuntu-bugs mailing
My problem is a little different. I don't know if it is related.
The state in /proc/acpi/button/lid/LID/state is ALWAYS correct.
However, after I close the lid for the first time and open it again, the
gnome-power-manager always says:
lid is closed, so we are ignoring -NORMAL state changes
(but
I noticed that after it resuming from hibernate the lid button works; if
I reboot system the lid button stop working again.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/89860
Title:
I found this workaround:
https://bugzilla.redhat.com/show_bug.cgi?id=512958#c23
sudo su
echo 1 /proc/acpi/video/C085/DOS
echo 0 /proc/acpi/video/C085/DOS
** Bug watch added: Red Hat Bugzilla #512958
https://bugzilla.redhat.com/show_bug.cgi?id=512958
--
You received this bug notification
** Changed in: acpi
Importance: Unknown = Medium
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/89860
Title:
/proc/acpi/button/lid/*/state always says open
--
ubuntu-bugs mailing list
** Changed in: acpi
Status: Invalid = Expired
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/89860
Title:
/proc/acpi/button/lid/*/state always says open
--
ubuntu-bugs mailing list
Same problem with Lucid 10.04.1 on HP 530 laptop.
Linux 2.6.32-27-generic #49-Ubuntu SMP Thu Dec 2 00:51:09 UTC 2010 x86_64
GNU/Linux
cat /proc/acpi/button/lid/C20C/state always says open
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
+1 acer travelmate 5520g Linux 2.6.35-22-generic #33-Ubuntu SMP Sun Sep
19 20:32:27 UTC 2010 x86_64 GNU/Linux
cat /proc/acpi/button/lid/LID0/state always says open
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because
Tried lucid with latest 2.6.34 kernel from mainline and the lid button
worked again! Couldn't resume from hibernate though. Upgraded to
mevarick beta and lid button stopped working again, sigh...
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received
Being at it, I tried maverick beta with mainline kernel linux-
image-2.6.36-999-generic_2.6.36-999.201009240945_i386.deb. This works
again (nc6000)! So there's still hope...
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification
Same problem with lucid and nc6000.
lshal -m
and pushing lid button does not produce any output at all (and it is not a
hardware failure, checked with Windows).
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because
Same problem on Lucid 10.04 on an HP nc6120.
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Upgraded to lucid (10.04) -- does not work.
Computer: HP compaq NC6000
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
lshal -m
and pushing lid button generates 2x times closing and opening.
Start monitoring devicelist:
-
12:12:37.511: computer_logicaldev_input_2 property button.state.value = true
12:12:37.527: computer_logicaldev_input_2 condition ButtonPressed =
HP Pavilion dv4000 -- confirming the issue on both Jaunty and Karmic.
Also, under Karmic:
suspend--close the lid--open the lid: laptop wakes up only to go to
suspend immediately. Judging by the time stamps from the logs, the
suspend sequence continues after waking up. The cycle breaks if wake up
Upgraded to karmic 32bit. Does not work on HP Compaq nc600
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
As others noted before after Hibernate the lid started to work.
Unfortunately it is working till first reboot or poweroff.
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is
HP compaq NC6320. Same problem.
Also, after 'suspend to disk', the lid state is reported correctly
(lshal -m and /proc/acpi/button/lid/*/state and laptop suspends as
expected.
uname -a
Linux Pampus 2.6.28-15-generic #49-Ubuntu SMP Tue Aug 18 18:40:08 UTC 2009 i686
GNU/Linux
** Attachment
I recently upgraded to karmic 64bit from 32bit and the problem vanished.
Using the stock 64bit kernel the lid switch is working properly, yet did
not work in 32bit.
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because
HP 530 same issue.
uname -a
Linux lucky 2.6.28-15-generic #49-Ubuntu SMP Tue Aug 18 18:40:08 UTC 2009 i686
GNU/Linux
$ ps -ef | grep acpi
root18 2 0 19:21 ?00:00:00 [kacpid]
root19 2 0 19:21 ?00:00:00 [kacpi_notify]
root 2213 1 0 19:22 ?
I have a HP NC4400 laptop and I'm experiencing the same problem on
Karmic Koala (kernel 2.6.31-3-generic). After a cold boot
/proc/acpi/button/lid/C241/state always shows open no matter if the
lid switch is activated. When the lid switch is activated the LCD
backlight does turn off but does not
https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.20/+bug/89860/comments/55
This comment reminded me at my bug comment in Bug keyboard freezes on
boot--sometimes
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/190834/comments/13
i could get keyboard working only when pressing to ON
** Changed in: acpi
Status: Incomplete = Invalid
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Here is what happens with a 2.6.30 kernel from kernel.org:
After booting the system, he lid button state is reported as closed.
After closing the lid for several seconds and opening it again, it is correctly
reported as open.
From that point on, the state is correctly reported, but with a rather
** Changed in: linux (Ubuntu)
Status: New = Triaged
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
** Package changed: ubuntu = acpi-support (Ubuntu)
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
'acpi' is a package that provides an interface emulating an older 'apm'
command; please don't assign generic ACPI bugs here.
** Changed in: acpi (Ubuntu)
Status: Confirmed = Invalid
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this
acpi-support is also unrelated to the contents of anything under
/proc/acpi.
** Changed in: acpi-support (Ubuntu)
Status: New = Invalid
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of
Working with the ACPI team to debug it
http://bugzilla.kernel.org/show_bug.cgi?id=13263
** Changed in: acpi (Ubuntu)
Assignee: (unassigned) = Ubuntu Kernel ACPI Team (ubuntu-kernel-acpi)
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received
** Changed in: acpi
Status: Confirmed = Incomplete
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Same problem here still, ACPI lid state is always open on hp dv2815nr
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Still affects linux-source-2.6.28
** Also affects: linux-meta (Ubuntu)
Importance: Undecided
Status: New
** Package changed: linux-meta (Ubuntu) = ubuntu
** Changed in: linux (Ubuntu)
Assignee: (unassigned) = Ubuntu Kernel ACPI Team (ubuntu-kernel-acpi)
** Changed in: linux
Does anyone notice that 90% of the comments include HP laptops?
** Bug watch added: Linux Kernel Bug Tracker #13263
http://bugzilla.kernel.org/show_bug.cgi?id=13263
** Also affects: acpi via
http://bugzilla.kernel.org/show_bug.cgi?id=13263
Importance: Unknown
Status: Unknown
--
** Changed in: acpi
Status: Unknown = Confirmed
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
FWIW it still doesn't work with 9.04 on HP nw8000 neither.
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
acpi_listen shows lid switch when i press power button, just like above
poster said. Lid switch event gets stuck somewhere.
Fix for this would be nice.
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a
I have the same symptoms with my NC6000 and 9.04
performing: cat /proc/acpi/button/lid/C138/state
with lid closed and open produces the same output, which is state:open
acpi_listen does not seem to work well in detecting the lid switch changes -
almost as if it is delayed.
If I push the lid
as many above posters have discovered, a hibernate/resume action makes
the lid switch work again.
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Still broken in 9.04 on my NC6000.
acpi=off worked sometimes but sometimes just gave up and of course I lost all
the goodness that came with acpi being on.
The screen turns off correctly during boot though (when the splash screen is
on) and only fails when X has started.
--
I have the same trouble with my laptop HP 530, both Ubuntu 8.10 and 9.04
beta!
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Same bug here, lid always reports as closed. Kernel 2.6.27-11. HP
530, Intel 945GME graphics.
Note: Lid button will shut screen off just fine if I boot with acpi=off.
Can't suspend then though...
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You
Hi,
I am using Ubuntu 8.10 on HP NC6000 and the lid switch is always open
and no change of state open or closed.
I hope it will be fixed.
Kernel 2.6.27-11
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are
When i hibernate it and then wake it up, then the lid switch does to
trigger.
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
I have just installed the beta version of the ati driver and the lid
switch started working and the screen started to go off completely and
turning the back-light off.
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification
same thing with intel cards - i have hp nx7400 and i950GMA on board.
Interesting thing is that, when i disconect or connect power cord or
ethernet wire the last touch of lid close button is working (i mean that
when i have closed lid before this). It might have been problem with
sending
I also have this issue when booting into recovery mode.
So, on my machine, this has nothing to do with X.org, I think.
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Hey,
I am confirm this bug on ubuntu 8.10 64 bit, my notebook is also a HP
NX7400 with an intel I945GMA on board graphical chip. Anyone who knows a
solution? Sometimes when my wifi is not unabled, my notebook goes into
sleep when closing the lid, so I suspect that this bug has something to
do
You might all be interested to know that I have found some intriguing
symptoms. I was just wondering if you all had an ati card and you were
all using the open ati drivers on it as opposed the fglrx drivers. if so
try the vesa drivers by adding Driver vesa in to the Device section of
your
** Changed in: acpi (Ubuntu)
Status: New = Confirmed
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
I have recently switched from 7.04 to 8.10 (clean install).
When pressing LID button on 7.04 the screen went blank.
On 8.10 -- no reaction on LID button. I confirm the above post.
No energy saving when closing the screen :(
$ uname -r
2.6.27-7-generic
--
/proc/acpi/button/lid/*/state always
This is also a regression for me on my HP NC6000, unlike others above
when the lid is closed/lid button depressed the screen stays on.
7.10 - No joy (may have started working towards the end of the release, I have
a poor memory)
8.04 - Worked from the beginning of the release until the end (best
This bug has appeared for me as a regression with 8.10. The lid switch
was correctly detected in a standard installation of 8.04! The lid
witch is always reported as open.
The machine is a HP Compaq nx7400.
A
--
/proc/acpi/button/lid/*/state always says open
I haven't tested the new Ubuntu kernel yet, but I still have the same
issue (i.e., button state always reported as closed) running a fresh
2.6.27.1 kernel from kernel.org.
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification
Just adding a note here that this bug report will remain open against
the actively developed kernel (ie the 'linux' package) but against
2.6.20 and 2.6.22 this will be closed as it does not qualify for a
Stable Release Update - http://wiki.ubuntu.com/StableReleaseUpdates .
Thanks.
** Changed in:
I have a nx6110 and this issue would come and go and usually running
sudo echo 1 /proc/acpi/video/*/DOS would help with the issue but not
always. After having the lid closed for a while the system would be
almost unusable as the mouse would shake and any application would
flicker. A reboot
I'm sorry, but at this moment it's not possible to get back on my
HP 530c, because I gave it to my mom, and I am abroad currently.
Although when I get back home I'll test it ASAP, and I also think
to install testing Itrepid on my new MSI laptop (which I'm buying next
week).
So
The Ubuntu Kernel Team is planning to move to the 2.6.27 kernel for the
upcoming Intrepid Ibex 8.10 release. As a result, the kernel team would
appreciate it if you could please test this newer 2.6.27 Ubuntu kernel.
There are one of two ways you should be able to test:
1) If you are comfortable
Working now with hardy on HP NC6000
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
I haven't tried switching the video driver yet, but I can report that
the problem still occurs with the 2.6.26 kernel fresh from kernel.org.
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of
Same issue. Just as Konst also using the intel driver. With vesa it was
working.
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Guys, I've bought one more HP 530 and installed Kubuntu Hardy there.
So : in LiveCD mode and after installing Kubuntu to hard disk system was
reacting on laptop lid close. (But after turning off display system
turned it on in a couple of seconds.)
I noticed that vesa driver for graphical adapter
I have the same problem, too...
HP 530
xubuntu 8.04
kernel: Linux version 2.6.24-19-generic ([EMAIL PROTECTED]) (gcc version 4.2.3
(Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 4 16:35:01 UTC 2008
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received
It dos work for me now.
I'm running Xubuntu 8.04 Hardy Heron but with the gnome desktop so i guess we
can say Ubuntu.
Well i have the HP Compaq nc6000 and the lid works perfekt now :)
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug
HP nx6310: still doesn't work.
Ubundu 8.04.
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
I have HP 530 and Kubuntu, and lid doesn't work. I have tried Ubuntu
8.04 as live CD and it works there perfectly, also it does work from
Kubuntu 8.04 live CD, BUT after a couple of seconds the display turns
on.
--
/proc/acpi/button/lid/*/state always says open
I have HP 530 and Kubuntu, and lid doesn't work. I have tried Ubuntu
8.04 as live CD and it works there perfectly, also it does work from
Kubuntu 8.04 live CD, BUT after a couple of seconds the display turns
on.
--
/proc/acpi/button/lid/*/state always says open
I see that the bug has been triaged. I also suffer from the bug. I'm
running an up-to-date Gutsy install (uname -r = 2.6.22-14-generic).
cat /proc/acpi/button/lid/C20C/state always returns open. Closing lid
to standby works in vista, so it's not hardware failure.
Unfortunately, dmesg doesn't
I am experiencing the same issue under hardy on a Samsung X20 XVM 1730 V
laptop. The lid button state is always reported as closed, though.
For me, this used to work up until gutsy, I think. It is definitely a
regression.
--
/proc/acpi/button/lid/*/state always says open
** Changed in: linux (Ubuntu)
Sourcepackagename: linux-source-2.6.24 = linux
Importance: Undecided = Medium
Assignee: (unassigned) = Ubuntu Kernel Team (ubuntu-kernel-team)
Status: New = Triaged
--
/proc/acpi/button/lid/*/state always says open
HP Compaq nx6310
Ubuntu Hardy Heron 8.04
Lid button still does not work.
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
I can confirm this behavior on my Samsung Q45
(https://wiki.ubuntu.com/LaptopTestingTeam/SamsungQ45Dalia).
After boot closing the lid does nothing. After one Suspend-to-RAM and
resume cycle, closing the lid works as expected.
I'll attach the dmesg after boot and after the STR-resume cycle...
**
** Attachment added: dmesg.after-STR.txt
http://launchpadlibrarian.net/13851958/dmesg.after-STR.txt
** Also affects: linux-source-2.6.24 (Ubuntu)
Importance: Undecided
Status: New
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received
I forgot to say: I'm running hardy.
Let me know if I can do something to help debugging this problem.
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Doesn't work for me either.
HP compaq nc6000
Ubuntu Gutsy gibbon
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Additional info.
As thistleep said before;
He said that if he hibernated his nc6000 and then woke it the lid button works.
That is the case for me too. If works perfectly.
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug
HP Compaq nx6310: same problem.
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Under WinXP it has been working fine.
uname -r = 2.6.22-14-generic
Ubuntu Gusty Gibbon 7.10
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
I have same problem on my HP 520 laptop.
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Lid state reports correctly after hibernate-resume(???)
fine in Winxp
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing
Same problem with my HP 520 laptop, version 2.6.22-14-generic #1 SMP Tue Dec 18
08:02:57 UTC 2007 i686 GNU/Linux
lid state always open.
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
I have the same problem on a HP NC6000, the state is updated *only* when the
sleep button (FN+F3 is pressed and the computer awaken again).
The lid button doesn't affect the state when the computer is on...
Bios 68BDD Ver. F.14
--
/proc/acpi/button/lid/*/state always says open
I did an install of both ubuntu and kubuntu Gutsy on i386. No deal. Bug
is still there.
--
/proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
1 - 100 of 125 matches
Mail list logo
