Swap partition failed to mount on resuming from hibernate with gutsy.
[EMAIL PROTECTED]:~$ sudo vol_id /dev/sda12
ID_FS_USAGE=other
ID_FS_TYPE=suspend
ID_FS_VERSION=s1suspend
ID_FS_UUID=50e4bada-e2bc-4cc4-b6a6-ce280decd803
ID_FS_UUID_ENC=50e4bada-e2bc-4cc4-b6a6-ce280decd803
ID_FS_LABEL=
I will try to fix this in the next version. The xscreensaver package
actually ships /usr/share/xscreensaver/gnome-screensaver-
properties.desktop but it is hidden with NoDisplay=true. It's like this
in Debian because there the xscreensaver package is not split up like in
Ubuntu, and therefore both
Hi Sense,
This sounds promising for resolving this bug at least. Just to be sure
though I'll ask if you could test with the Hardy Alpha2 LiveCD once it
comes out. I'll be sure to update this report when it is available.
Thanks!
** Tags added: hardy-alpha2
--
amd64: Random system hangs and
Public bug reported:
Binary package hint: casper
respected sir,
I had installed ubuntu from ubuntu.com, i boot the
system from the cd, in a few sec. options of ubuntu operating system came, then
i selected the the first option start or install ubuntu, pressed enter,
confirmed on hardy with fglrx 8.43.2 aka 7-11 and an ati x1250
--
compiz will not launch with fglrx driver - falls back to metacity
https://bugs.launchpad.net/bugs/173663
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
Nanley, sorry that I didn't fully understand your question regarding
Restricted Manager. Well, I did turn on some wireless driver when I
saw some dialog message pops up, and I remembered I did went through
several steps to activate the wireless device.
I now stop the Wireless driver by System -
Leann, I tested with Gutsy not Hardy.
I would have tested with Hardy but couldn't find the live cd.
...When Alpha2 comes out, where will I find the live CD?
--
ehci_hcd module causes I/O errors in USB 2.0 devices
https://bugs.launchpad.net/bugs/88746
You received this bug notification because
** Also affects: linux via
http://bugzilla.kernel.org/show_bug.cgi?id=5410
Importance: Unknown
Status: Unknown
** Also affects: linux (Ubuntu)
Importance: Undecided
Status: New
** Changed in: linux (Ubuntu)
Importance: Undecided = Medium
Assignee: (unassigned) =
** Changed in: xfce4-utils (Ubuntu)
Status: In Progress = Fix Released
--
Sponsor: xfce4-utils_4.4.2-3ubuntu2
https://bugs.launchpad.net/bugs/176624
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing
confirmed on hardy
** Changed in: celestia (Ubuntu)
Assignee: (unassigned) = Daniel Schwitzgebel (schwitzd)
Status: Triaged = Confirmed
--
package celestia-kde None [modified: /var/lib/dpkg/info/celestia-kde.list]
failed to install/upgrade: trying to overwrite
I've since learned that ATI cards have extraordinarily poor driver
support in Linux and have stopped using them. I've never had the problem
with an nVidia card. If I have time today I can test to see if the issue
still occurs on a fully updated 7.04 installation using the ATI binary
drivers.
Bulldog, this is due to Ubuntu having buggy init scripts, and not
setting the time correctly before running e2fsck. For some number of
strange reasons I haven't been able to get Ubuntu staff to deal with
this problem correclty, so starting with e2fsprogs 1.40.3, the
debian/rules files have been
Thank you for taking the time to report this bug and helping to make
Ubuntu better. You reported this bug a while ago and there hasn't been
any activity in it recently. We were wondering is this still an issue
for you? Can you try with latest Ubuntu release? Thanks in advance.
** Changed in:
I encountered the same problem. Thank you for identifying the true
location as a workaround.
--
VGABIOS-lgpl-latest not found
https://bugs.launchpad.net/bugs/132682
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs
Thank you for taking the time to report this bug and helping to make
Ubuntu better. You reported this bug a while ago and there hasn't been
any activity in it recently. We were wondering is this still an issue
for you? Can you try with latest updates of the kernel or the latest
ubuntu realese?
Public bug reported:
Binary package hint: apt-file
I installed apt-file yesterday, and would have expected it to work by
today (the computer has been running for all this time). However, it
doesn't, mostly.
vnix$ time apt-file search nosuchfile
gzip:
** Changed in: celestia (Ubuntu)
Assignee: Daniel Schwitzgebel (schwitzd) = (unassigned)
--
package celestia-kde None [modified: /var/lib/dpkg/info/celestia-kde.list]
failed to install/upgrade: trying to overwrite
`/usr/share/celestia/data/asteroids.ssc', which is also in package
Done.
** Attachment added: gravitywars_1.102-31ubuntu1.debdiff
http://launchpadlibrarian.net/10927754/gravitywars_1.102-31ubuntu1.debdiff
--
gravitywars has no .desktop file
https://bugs.launchpad.net/bugs/174906
You received this bug notification because you are a member of Ubuntu
Bugs,
** Changed in: atanks (Ubuntu)
Assignee: (unassigned) = Salvatore Palma (palma-salvatore)
--
[atanks] no .desktop file
https://bugs.launchpad.net/bugs/172588
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs
is there a workaround for this issue ?
Thank you
--
rt2x00-source module requires radio support in the kernel
https://bugs.launchpad.net/bugs/126632
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
I ran into this same problem. It's going to prevent me from using
Ubuntu on servers where I don't have ready access to the console. If it
cannot boot unattended in degraded mode, that means my server is down,
even though it has an array to use.
In case it's of value, I also encountered this
I confirm the bug.
--
8.04 ia32libs 2.2ubuntu1 breaks libpcre.so.3
https://bugs.launchpad.net/bugs/176653
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Public bug reported:
Binary package hint: apt-file
While investigating bug #176753 I inspected the postrm file in the apt-
file package. That was not the cause for my problem, but it seems that
it would fail to fetch the update if the first source in the file is a
cdrom: location, as typically
k9copy (1.2.1-0ubuntu1) hardy; urgency=low
* New upstream release
* debian/control:
* Build-Depends on libdvdread-dev (was libdvdread3-dev)
* Build-Depends on libavformat-dev libavcodec-dev
* debian/patches/kubuntu_04_fix_header_files_inclusion.patch:
* Dropped, as it is
Via recently released a new driver. Did anyone try it ?
--
freezes with 3D applications on VIA Unichrome K8M800, KM400
https://bugs.launchpad.net/bugs/43154
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
ubuntu-bugs mailing list
my problem with Debian was unrelated.
--
[GUTSY] Regression - Volume Control Bar doesn't slide when using keyboard
shortcut
https://bugs.launchpad.net/bugs/126333
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs
I now tried with Kubuntu Hardy Alpha 1. there after the xserver starts,
the same happens. But this time I was able to press Ctrl+Alt+F6 and
changed in the Device section, of the xorg.conf file, the Driver of
the graphic device drive, from intel to i810. After restarting the
xserver, it worked
Another thing to note is that my devices were working with Gutsy
And then mysteriously stopped working.
Maybe a kernel update caused this?
I believe Elias also reported this above.
--
ehci_hcd module causes I/O errors in USB 2.0 devices
https://bugs.launchpad.net/bugs/88746
You received this
After boot:
[EMAIL PROTECTED]:~/119901$ xrandr -q
Screen 0: minimum 640 x 480, current 2960 x 1050, maximum 2960 x 1050
default connected 2960x1050+0+0 0mm x 0mm
2960x1050 50.0*
1680x1050 51.0
1024x768 52.0
800x60053.0
640x48054.0
[EMAIL
** Attachment added: dmesg after return from suspend
http://launchpadlibrarian.net/10927892/dmesg-aftersuspend.log
--
blank screen for terminal shell when coming back from sleep
https://bugs.launchpad.net/bugs/119901
You received this bug notification because you are a member of Ubuntu
Bugs,
** Attachment added: lscpi after return from suspend
http://launchpadlibrarian.net/10927904/lspci-vvnn-aftersuspend.log
--
blank screen for terminal shell when coming back from sleep
https://bugs.launchpad.net/bugs/119901
You received this bug notification because you are a member of Ubuntu
$uname -a
Linux vader 2.6.22-14-generic #1 SMP Sun Oct 14 23:05:12 GMT 2007 i686 GNU/Linux
** Attachment added: lscpi after fresh reboot
http://launchpadlibrarian.net/10927882/lspci-vvnn.log
--
blank screen for terminal shell when coming back from sleep
https://bugs.launchpad.net/bugs/119901
** Attachment added: dmesg log after a fresh reboot
http://launchpadlibrarian.net/10927861/dmesg-afterboot.log
--
blank screen for terminal shell when coming back from sleep
https://bugs.launchpad.net/bugs/119901
You received this bug notification because you are a member of Ubuntu
Bugs,
Hi guys
Hi Sebastien
Just for info:
I m using gentoo.
$ sudo emerge --info
Portage 2.1.3.19 (default-linux/x86/2007.0/desktop, gcc-4.1.2, glibc-2.6.1-r0,
2.6.22-gentoo-r2 i686)
=
System uname: 2.6.22-gentoo-r2 i686 Intel(R)
2nd debdiff:
+libcairo (1.5.4-0ubuntu1) hardy; urgency=low
+
+ * new upstream snapshot: 1.5.4
+ * Drop patches no longer useful:
+- debian/patches/91_malloc-overflow-fixes.dpatch
+- debian/patches/90_from_git_fix_zero_sized_bitmap_handling.dpatch
+-
Here are two debdiff.
fontconfig-2.5.0-2ubuntu1--2.5.0-2ubuntu2.debdiff
libcairo_1.4.10-1ubuntu6--1.5.4-0ubuntu1.debdiff
The 1st one (fontconfig) is a requirement for the 2nd.
I've tested that for a couple of days. No regression on my system.
I've used that cairo with xulrunner 1.9 and firefox
Open /usr/share/applications/mplayer.desktop
change Exec=gmplayer %U to Exec=gmplayer %f
That'll make it pass mplayer the local path rather than constructing a url.
--
gmplayer fails to play a file whose filename contains spaces
https://bugs.launchpad.net/bugs/164709
You received this bug
Public bug reported:
Binary package hint: nautilus
Given the following conditions:
1. User x has a directory he owns on on file-system y which is _not_ his
home directory
2. User x does not have write access to the y root directory
3. There is no .trash-x directory in the y root directory or it
I used Kubuntu 7.10
--
progress bar window not showing
https://bugs.launchpad.net/bugs/157462
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
See also bug #176754 for the problem with the Funet mirror.
--
Please check integrity of downloaded files
https://bugs.launchpad.net/bugs/176753
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
Public bug reported:
As reported just now in Launchpad bug #176753 there is a problem with at
least the apt-file files on the Funet.fi mirror. See the other bug for
a detailed report.
** Affects: ubuntu
Importance: Undecided
Status: New
--
funet mirror misconfigured?
Hello, is there any chance that this bug will get attention?
--
[Gutsy] IMAP Ping error
https://bugs.launchpad.net/bugs/160704
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
*** This bug is a duplicate of bug 136469 ***
https://bugs.launchpad.net/bugs/136469
In my HP DV5234US laptop with Conexant HDA (Intel 828016, ICH7 Family),
I have *beautiful* sound when running from the Gutsy Live CD (either
Ubuntu or Kubuntu), but when either is installed the system sound
Is there any way you can test this on Gutsy? There should be a newer
version of fglrx in that release. Thanks in advance!
--
system freezes on log-in
https://bugs.launchpad.net/bugs/114033
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for
** Changed in: libcairo (Ubuntu)
Status: Invalid = In Progress
--
Build Firefox 3 against a subpixel-patched cairo
https://bugs.launchpad.net/bugs/164640
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs
On, my laptop with gutsy, I can't get the card working... The led light
is always off...
I then install the kernel from feisty, and load ubuntu with it, then I
do modprob ndiswrapper and the light enables, and the card is working.
Then if I reboot to the kernel from gutsy, and modprobe
Public bug reported:
When quitting nautilus, for example by logging out, a nautilus-debug-
log.txt-file is created in the ~-directory. No other errors are known.
In the file is only one message: debug log dumped due to signal 11:
and that a thousand times. It's various how long the list is.
Here
*** This bug is a duplicate of bug 173890 ***
https://bugs.launchpad.net/bugs/173890
Forgive me, I've made a mistake. I must have mixed flashplayer-mozilla
from earlier versions of Ubuntu with the mozilla-gnash-plugin. Sorry for
the trouble Cyrus. I'll remark this bug as a dupe.
** Changed
Ok, I will reuse this bug and turn it into a sync request. I have read
the documentation on the MOTU pages about syncs and am a little unclear
on what I need to document here, but I will stop in #ubuntu-motu and
ask. Thanks!
--
Please upload merge wmbinclock-0.5-5 (universe) from debian
I will test both. I'll have the results by tomorrow.
Kevin
Nanley Chery wrote:
Is there any way you can test this on Gutsy? There should be a newer
version of fglrx in that release. Thanks in advance!
--
system freezes on log-in
https://bugs.launchpad.net/bugs/114033
You received this bug
I can also confirm that this is the case on AMD64 for Gutsy. This bug
(or it's like) has been around since Feisty. It's pretty annoying
because I run a computer at home with one ip address for my internal
clients to access my site from and one for my external clients. If for
some reason the
A few more notes from testing. A lot of people talking about CD-ROM
drives. I have two optical drives, one Samsung and one NEC.
I disconnected the Samsung drive - same problem.
Connect both optical drives plus Samsung SATA harddrive - problem
Connect both optical drives plus Maxtor SATA
** Attachment added: Log from regular login.
http://launchpadlibrarian.net/10928378/Xorg.0.log
--
Graphics very slow following Hardy Heron Alpha 1 upgrade on Intel 945 chipset.
https://bugs.launchpad.net/bugs/176671
You received this bug notification because you are a member of Ubuntu
Bugs,
Hi there,
If I set the session to Failsafe GNOME, the scrolling issues and general
performance of the graphics is slightly better than if I log into GNOME
otherwise .. but still worse than before the upgrade.
Attached are my configuration and log files. Please ignore the Synaptic
Touchpad stuff
Hi there,
If I set the session to Failsafe GNOME, the scrolling issues and
general performance of the graphics is slightly better than if I log
into GNOME otherwise .. but still worse than before the upgrade.
Attached are my configuration and log files as they are on my system
right now. The
** Attachment added: Log from login with xorg.conf removed.
http://launchpadlibrarian.net/10928472/Xorg.0.log
--
Graphics very slow following Hardy Heron Alpha 1 upgrade on Intel 945 chipset.
https://bugs.launchpad.net/bugs/176671
You received this bug notification because you are a member
I solve with an update to lateste alsa (1.0.15).
My pc config is toshiba a200 1I7 ubuntu 7.10
$ sudo apt-get install libncurses5-dev build-essential
$ mkdir -p /usr/src/alsa
$ cp alsa* /usr/src/alsa
$ tar jxvf alsa-driver-1.0.15.tar.bz2
$ tar jxvf alsa-lib-1.0.15.tar.bz2
$ tar jxvf
gaphor 0.10.4 works with python 2.4.
I patch /usr/bin/gaphor file.
I change the first line
#!/usr/bin/python
to
#!/usr/bin/python2.4
It work for me.
--
Gaphor doesn't start
https://bugs.launchpad.net/bugs/30344
You received this bug notification because you are a member of Ubuntu
Bugs,
Public bug reported:
Binary package hint: smplayer
Please add dh_installmenu to debian/rules.
** Affects: smplayer (Ubuntu)
Importance: Undecided
Status: New
--
add dh_installmenu to rules.
https://bugs.launchpad.net/bugs/176761
You received this bug notification because you are
*** This bug is a duplicate of bug 149847 ***
https://bugs.launchpad.net/bugs/149847
** This bug has been marked a duplicate of bug 149847
[hardy] [needs-packaging] Tennix 0.4.1
--
[needs-packaging] Tennix
https://bugs.launchpad.net/bugs/176723
You received this bug notification because
Public bug reported:
tin version 1:1.9.2+20070201-1 in gutsy.
** Affects: tin (Ubuntu)
Importance: Undecided
Status: New
** Changed in: tin (Ubuntu)
Sourcepackagename: None = tin
--
Tin Usenet newsreader fills empty space blue, when scrolling down message
I tried using an older xorg.conf file from before the update, and it
works well! In Gnome, things are noticably smoother and faster. Now the
login screen is in a weird resolution (640x480?).
I'm attaching the .conf file for reference.
** Attachment added: xorg.conf.15
Ping doesn't use network-manager to help it resolve host names. It uses the
system libraries which use
nsswitch. What is the entry for hosts: in your /etc/nsswitch.conf?
--
network-manager (pptp?) DNS doesn't work
https://bugs.launchpad.net/bugs/174909
You received this bug notification
I missed this packaging request (was set as invalid and missed it when
searching on launchpad), and filed another bug. Marked the newer one as
a duplicate and assigned this one to myself.
** Changed in: ubuntu
Assignee: (unassigned) = Andrea Colangelo (warp10)
Status: Invalid = In
http://revu.ubuntuwire.com/details.py?package=tennix
--
[hardy] [needs-packaging] Tennix 0.4.1
https://bugs.launchpad.net/bugs/149847
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
** Changed in: smplayer (Ubuntu)
Assignee: (unassigned) = Daniel Schwitzgebel (schwitzd)
--
add dh_installmenu to rules.
https://bugs.launchpad.net/bugs/176761
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs
Sorry, in the hurry I forgot to post the file. Here is the modified
version of Xgl-session
The command /usr/bin/seahorse-agent --execute /usr/bin/gnome-session is
passed as argument to the Xgl-session script and executed at the end.
If the display in $DISPLAY is not ready the command fails
Public bug reported:
After installing flash via apt-get install flashplugin-nonfree this
message apears an no flashsite is working:
Download done.
md5sum mismatch install_flash_player_9_linux.tar.gz
The Flash plugin is NOT installed.
** Affects: flashplugin-nonfree (Ubuntu)
Importance:
** Changed in: celestia (Ubuntu)
Status: Confirmed = Triaged
--
package celestia-kde None [modified: /var/lib/dpkg/info/celestia-kde.list]
failed to install/upgrade: trying to overwrite
`/usr/share/celestia/data/asteroids.ssc', which is also in package
celestia-common
*** This bug is a duplicate of bug 132627 ***
https://bugs.launchpad.net/bugs/132627
** This bug has been marked a duplicate of bug 132627
GSynaptics couldn't initialize.
--
SHMConfig doesn't work in gutsy
https://bugs.launchpad.net/bugs/155119
You received this bug notification because
*** This bug is a duplicate of bug 132627 ***
https://bugs.launchpad.net/bugs/132627
** This bug has been marked a duplicate of bug 132627
GSynaptics couldn't initialize.
--
gutsy: gsynaptics asks me to edit xorg.conf
https://bugs.launchpad.net/bugs/146857
You received this bug
*** This bug is a duplicate of bug 132627 ***
https://bugs.launchpad.net/bugs/132627
** This bug has been marked a duplicate of bug 132627
GSynaptics couldn't initialize.
--
There is no option to enable touchpad on laptop instalation mode
https://bugs.launchpad.net/bugs/136375
You
The bugfix
** Changed in: smplayer (Ubuntu)
Status: New = Confirmed
** Attachment added: smplayer_0.5.20-0ubuntu2.debdiff
http://launchpadlibrarian.net/10928671/smplayer_0.5.20-0ubuntu2.debdiff
** Changed in: smplayer (Ubuntu)
Assignee: Daniel Schwitzgebel (schwitzd) =
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/10928845/Dependencies.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/10928846/ProcMaps.txt
** Attachment added: ProcStatus.txt
http://launchpadlibrarian.net/10928847/ProcStatus.txt
** Attachment
Public bug reported:
Binary package hint: arts
A message dialog appears upon login to KDE.
Click on applet to see details: artsd has crashed.
An instance of Konqueror which I thought I had
terminated reappears. Apparently previous
logout did not save all session information, so
session is
QDVDAuthor schrieb folgendes am 16.12.2007 18:05:
Thank you I received the bug report.
Hi Varol,
I am using the MediaBackend to determine media properties. So if you
select MPlayerWidget, QDVDAuthor will use mplayer to determine the
length of the ac3 file.
I will try that. Thanks for the
It was user error. Took me a while to find the setting for tiled vs.
centered.
** Changed in: openoffice.org (Ubuntu)
Assignee: (unassigned) = alowe (swelltimes)
Status: New = Invalid
--
Prsentations with image background do not export to pdf correctly
I think you just need to perform File - Open... (press Ctrl-O) action in order
to read DVD layout.
You should run k9copy as normal user and not as root.
** Changed in: k9copy (Ubuntu)
Assignee: (unassigned) = Luka Renko (lure)
Status: New = Incomplete
--
dvd is not opened message
Yup, I see the same thing (gutsy, totem-gstreamer)
--
Totem subtitles drawing bug
https://bugs.launchpad.net/bugs/161153
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Actually I am not sure that what I said is valid for 4.25. Anyway 5.04
is in Hardy, and once we have fixed it up a little, I hope we can make a
backport for Gutsy.
--
xscreensaver v 4.23 has a bug, where the screensaver icon is not at System
Prefrences (screensaver)
Public bug reported:
Binary package hint: flashplugin-nonfree
It appears 32bit libpcre.so.3 needs to be packaged for amd64 as well for
flashplugin-nonfree usage...
Setting up flashplugin-nonfree (9.0.115.0ubuntu2) ...
Installing from local file
This package was previously merged but it can now be synced from Debian
unstable (main).
Rationale:
The prior Ubuntu changes were as follows:
* Add Build-depends for xorg transition: x11proto-xext-dev, libxt-dev
* Add libxext-dev to Build-Depends
The first two Build-Depends additions,
Well, yeah. It's easily installed within a few minutes. Just start the
.run file and that's it. Charming. Problem is, it doesn't work. Xorg.log
says wrong VGA bios checksum. I'll attach my xorg.log.
** Attachment added: xorg.log
http://launchpadlibrarian.net/10928860/xorg.log
--
freezes with
Public bug reported:
OS: updated gutsy
Possibly related Firefox add-ons: NoScript, Tab Mix Plus. (I want to use these)
The bug does not happen always.
** Affects: firefox (Ubuntu)
Importance: Undecided
Status: New
--
Firefox closes tab slowly
** Summary changed:
- [Hardy] flashplugin-nonfree needs libpcre.so.3 which doesn't exist?
+ [Hardy] flashplugin-nonfree needs libpcre.so.3 which doesn't exist on amd64?
--
[Hardy] flashplugin-nonfree needs libpcre.so.3 which doesn't exist on amd64?
https://bugs.launchpad.net/bugs/176778
You
OK, spoke to soon. It's very slow again now and phones don't seem to
make any difference.
--
ipw3945 Wifi connection is very slow
https://bugs.launchpad.net/bugs/103210
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
*** This bug is a duplicate of bug 122999 ***
https://bugs.launchpad.net/bugs/122999
** This bug has been marked a duplicate of bug 122999
[via] glxinfo crashed with SIGSEGV in viaXMesaWindowMoved()
--
[apport] flyingtoasters crashed with SIGSEGV in viaXMesaWindowMoved()
This happens in my mother's machine as well, using D-link DWL-G122 rev
C1 usb wireless adapter on Pentium 4. I see the (unencrypted) networks
but cannot connect. Great annoyance, since it does not play nice with
ndiswrapper as well. I do not want to break ubuntu (and make it more
complicated for
Public bug reported:
Since i was forced(Feisty Fawn - Gutsy upgrade) to use Xine as engine, Amarok
crashes with some mp3. However not all mp3 causes the crash.
Other Xine-based player(gxine, totem-xine, kaffeine-xine, xine-ui) can play
these mp3 without problems. Only Amarok always crashes.
The
Thank you for taking the time to report this bug and helping to make
Ubuntu better. You reported this bug a while ago and there hasn't been
any activity in it recently. We were wondering is this still an issue
for you? Can you try with latest Ubuntu release? Thanks in advance.
** Summary changed:
** Summary changed:
- xrayswarm crashed with SIGSEGV in XDrawLine()
+ [nvidia] xrayswarm crashed with SIGSEGV in XDrawLine()
--
[nvidia] xrayswarm crashed with SIGSEGV in XDrawLine()
https://bugs.launchpad.net/bugs/123300
You received this bug notification because you are a member of Ubuntu
Thank you for taking the time to report this bug and helping to make
Ubuntu better. You reported this bug a while ago and there hasn't been
any activity in it recently. We were wondering is this still an issue
for you? Can you try with latest Ubuntu release? Thanks in advance.
Can you also attach
*** This bug is a duplicate of bug 173890 ***
https://bugs.launchpad.net/bugs/173890
Marking as a duplicate of Bug 173890. See
http://ubuntuforums.org/showthread.php?t=636397 for more info.
** This bug has been marked a duplicate of bug 173890
flashplugin-nonfree fails to install... new
Guys,
I'm going to attempt to tidy this up and put it to bed a little better.
Please don't take this as a I don't care about konquer situation, as
thats not the key, kubuntu/konquer are key.
I would request that there is two seperate bugs launched one for working
in opera and one for konquer,
The new version is uploaded to Debian and sync has been requested. See
Bug #176726 for status on the sync.
--
SPF rejects mail on unsupported SPF RR type
https://bugs.launchpad.net/bugs/161133
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact
Thank you for taking the time to report this bug and helping to make
Ubuntu better. You reported this bug a while ago and there hasn't been
any activity in it recently. We were wondering is this still an issue
for you? Can you try with latest Ubuntu release? Thanks in advance.
Please attach your
I don't know if they above guy still has this bug, but *I* still have it
in Ubuntu Gutsy running 2.6.22-14 ... has this been fixed? It really is
a problem for VMWare as it can't do anything with serial ports on a
timely basis either.
--
/dev/rtc Device or resource busy
I don't know if they above guy still has this bug, but *I* still have it
in Ubuntu Gutsy running 2.6.22-14 ... has this been fixed? It really is
a problem for VMWare as it can't do anything with serial ports on a
timely basis either.
--
/dev/rtc Device or resource busy
See Bug 176778
I'll close this bug (reopen if you feel that I should not close it). And move
any comments on the libpcre.so.3: cannot open shared object file: No such file
or directory bug over to Bug 176778.
** Changed in: flashplugin-nonfree (Ubuntu)
Status: New = Invalid
--
On
This was fixed back in September. Marking fix released.
** Changed in: peercast (Ubuntu)
Status: In Progress = Fix Released
--
wrong dependency in package peercast-handlers
https://bugs.launchpad.net/bugs/139352
You received this bug notification because you are a member of Ubuntu
Bugs,
401 - 500 of 766 matches
Mail list logo
